Activated carbon fibers via reductive carbonization of cellulosic biomass for adsorption of nonpolar volatile organic compounds

Optimizing filters of activated carbons obtained from biomass residues for ethylene removal in agro-food industry devices

A series of adsorbents (activated carbons, ACs) were synthesized by physical and chemical activation of olive stones (OS) and their textural and chemical characteristics determined by complementary techniques such as N2 and CO2 physisorption, pH of the point zero of charge (pHPZC), HRSEM or XPS. Samples with a wide range of physicochemical properties were obtained by fitting the activation procedure. The performance of these adsorbents in filters working under dynamic conditions was studied by determining the corresponding breakthrough curves for the ethylene removal. The physicochemical transformations of OS during activation were related with the adsorptive performance of derivative ACs. Results were compared to those obtained using commercial carbons, in particular ACs, carbon black or carbon fibers, in order to identify the properties of these materials on influencing the adsorptive performance. In general, ACs from OS perform better than the commercial samples, being also easily regenerated and properly used during consecutive adsorption cycles. CO2-activation showed to be the best synthesis option, leading to granular ACs with a suitable microporosity and surface chemistry. These results could favour the integration of this type of inexpensive materials on devices for the preservation of climacteric fruits, in a clear example of circular economy by reusing the agricultural residues.

Improving the adsorption performance of non-polar benzene vapor by using lignin-based activated carbon

Both indoor and outdoor contamination continually contain benzene vapor. It has primary concerns about long-term health risks to the living environment. Benzene is a crucial airborne pollutant in the environment due to its apparent acute toxicity, high volatility, and poor degradability. It is especially urgent to restrain benzene emissions due to the persistent concentration increase and stringent processes. Benzene adsorption is a highly efficient mechanism with low cost, low energy consumption, and a simple process. In this study, biomass-derived porous carbon materials (TCACs) were synthesized by pyrolysis activation combined with H3PO4, HNO3, and HCl. TCAC44 has the best activation conclusion, showing that surface area and pore volume were 1107 m2/g and 0.58 cm3/g treated with H3PO4 and so was chosen for subsequent benzene adsorption/desorption tests. The adsorption capacities of benzene for TCAC44 were increased from 58 mg/g for 35 °C + 95% RH to 121 mg/g for 25 °C + 15% RH and presented a higher adsorption capacity of benzene than TCAC101 and TCAC133. Otherwise, well recyclability of TCAC44 was revealed as the benzene adsorption capacity reductions were 22.49% after five adsorption-desorption cycles. Furthermore, the present study established the property-application relationships to promote and encourage future research on the newly synthesized innovative TCAC44 for benzene removal.

Gas-phase degradation of VOCs using supported bacteria biofilms

Herein we report the use of Pseudomonas putida F1 biofilms grown on carbonized cellulosic fibers to achieve biodegradation of airborne volatile organic compounds (VOCs) in the absence of any bulk aqueous-phase media. It is believed that direct exposure of gaseous VOC substrates to biomass may eliminate aqueous-phase mass transfer resistance and facilitate VOC capture and degradation. When tested with toluene vapor as a model VOC, the supported biofilm could grow optimally at 300 p.p.m. toluene and 80% relative humidity, with a specific growth rate of 0.425 day^-1 . During long-term VOC biodegradation tests in a tubular packed bed reactor, biofilms achieved a toluene degradation rate of 2.5 mg g_DCW ^-1  h^-1 during the initial growth phase. Interestingly, the P. putida F1 film kept biodegrading activity even at the stationary nongrowth phase. The supported biofilms with a biomass loading of 20% (wt) could degrade toluene at a rate of 1.9 mg g_DCW ^-1  h^-1 during the stationary phase, releasing CO₂ at a rate of 6.4 mg g_DCW ^-1  h^-1 at the same time (indicating 100% conversion of substrate carbon to CO₂ ). All of these observations promised a new type of "dry" biofilm reactors for efficient degradation of toxic VOCs without involving a large amount of water.

Solvent Effects in the Preparation of Catalysts Using Activated Carbon as a Carrier

The role of solvents is crucial in catalyst preparation. With regard to catalysts prepared with activated carbon (AC) as the carrier, when water is used as a solvent it is difficult for the solution to infiltrate the AC. Because AC comprises a large number of C atoms and is a nonpolar material, it is more effective for the adsorption of nonpolar substances. Since the water and active ingredients are polar, they cannot easily infiltrate AC. In this study, the dispersion of the active component was significantly improved by optimizing the solvent, and the particle size of the active component was reduced from 33.08 nm to 15.30 nm. The specific surface area of the catalyst is significantly increased, by 10%, reaching 991.49 m²/g. Under the same reaction conditions, the conversion of acetic acid by the catalyst prepared with the mixed solvent was maintained at approximately 65%, which was 22% higher than that obtained using the catalyst prepared with water as the solvent.

Highly Efficient Adsorption of Heavy Metals and Cationic Dyes by Smart Functionalized Sodium Alginate Hydrogels

In this paper, functionalized sodium alginate hydrogel (FSAH) was prepared to efficiently adsorb heavy metals and dyes. Hydrazide-functionalized sodium alginate (SA) prepared hydrazone groups to selectively capture heavy metals (Pb2+, Cd2+, and Cu2+), and another functional group (dopamine grafting), serves as sites for adsorption methylene blue (MB), malachite green (MG), crystal violet (CV). Thermodynamic parameters of adsorption indicated that the adsorption process is endothermic and spontaneous. The heavy metals adsorption by FSAH was physical adsorption mainly due to ΔHθ < 40 kJ/mol, and the adsorption of cationic dyes fitted with the Langmuir models, which indicated that the monolayer adsorption is dominated by hydrogen bonds, electrostatic interactions, and π-π interactions. Moreover, the adsorption efficiency maintained above 70% after five adsorption-desorption cycles. To sum up, FSAH has great application prospect.

Synthesis of Microporosity Dominant Wood-Based Activated Carbon Fiber for Removal of Copper Ions

Steam activation treatments were introduced in the preparation of activated carbon fiber from liquefied wood (LWACF), to enlarge its specific surface area and develop the pore size distribution. With increasing activation time, the average fiber diameter of LWACF decreased from 27.2 µm to 13.2 µm, while the specific surface area increased from 1025 to 2478 m²/g. Steam activation predominantly enhanced the development of microporosity, without significant pore widening. Prolonging the steam activation time exponentially increased the removal efficiency of Cu²⁺ at a constant adsorbent dose, as a result of an increase in the number of micropores and acidic-oxygenated groups. Moreover, for LWACF activated for 220 min at 800 °C, the removal efficiency of Cu²⁺ increased from 55.2% to 99.4%, when the porous carbon fiber dose went from 0.1 to 0.5 g/L. The synthesized LWACF was proven to be a highly efficient adsorbent for the treatment of Cu²⁺ ion-contaminated wastewater.

Highly efficient and selective adsorption of heavy metal ions by hydrazide-modified sodium alginate

In the present study, a new potential adsorbent for the separation and removal of heavy metal ions was prepared using hydrazide modification. Characterization of structural and chemical properties of the absorbent indicated the dialdehyde sodium alginate (DSA) grafted adipic acid dihydrazide (AAD) plays a crucial role. The adsorption process correlated well with Freundlich isotherm and pseudo-second-order kinetics models. Additionally, the adsorption capacities for Hg²⁺, Pb²⁺, Cd²⁺, and Cu²⁺ were 7.833, 2.036, 4.766, and 3.937 mmol g^-1, respectively. The thermodynamic parameter for the sorption demonstrated the process is endothermic and spontaneous. FT-IR and XPS analysis revealed the combination of chelation interactions and ion exchange between nitrogen, oxygen atoms and heavy metal ions. Moreover, after 10 times adsorption-desorption recycles, the adsorption efficiency of the adsorbent was slightly decreased. In conclusion, the as-prepared adsorbent has great potential in practical water pollution purification.

Effective removal of metal ions and cationic dyes from aqueous solution using different hydrazine-dopamine modified sodium alginate

In this paper, DSA-AAD-DA and DSA-TPDH-DA were prepared to effectively remove metal ions and cationic dyes from aqueous solution. The hydrazone structure was prepared by hydrazide-modified SA which captured metal ions selectively, and the remaining functional groups were used as active adsorption sites for cationic dyes. The thermodynamic parameter for the sorption demonstrated the process is endothermic and spontaneous. In single process, the adsorption of metal ions by DSA-AAD-DA and DSA-TPDH-DA correlated well with the Freundlich model through the hydrazone structure coordination and ion exchange which was mainly chemical adsorption, and cationic dyes adsorption correlated well with the Langmuir model which was shown monolayer adsorption was dominant by hydrogen bonding, electrostatic interaction, and π-π interaction. In binary system, the mixed adsorption shown significant antagonism effect in high concentration, but cationic dyes and metal ions in low concentration were efficiently and simultaneously removed, the adsorption ability of DSA-TPDH-DA was much better than DSA-AAD-DA. Moreover, adsorption efficiency can still maintain more than 80% after five times adsorption-desorption recycle. Therefore, DSA-AAD-DA and DSA-TPDH-DA possessed great potential for wastewater treatment.