Synthesis of paraffin@PS/reduced graphene oxide microcapsules via Pickering emulsion for multi-protective coatings

Phase Change Microcapsules with a Polystyrene/Boron Nitride Nanosheet Hybrid Shell for Enhanced Thermal Management of Electronics

Organic shell material and phase change material (PCM) have low thermal conductivity, which reduces the heat absorption and release rate of microencapsulated phase change materials (MEPCMs). Boron nitride nanosheets (BNNSs) with high thermal conductivity can not only stabilize the oil phase as the Pickering emulsifier but also improve the thermal conductivity of MEPCMs as one of the shell components, thus facilitating the heat conduction in the microcapsule system. Herein, MEPCM with paraffin wax (PW) as the core material and polystyrene (PS) modified by BNNSs as the shell material (PW@PS/BNNS MEPCMs) are synthesized via Pickering emulsion polymerization. The structure of PW@PS/BNNS MEPCMs can be regulated by tuning the PW and BNNS contents, to achieve high latent heat and thermal conductivity. In comparison to pure PW, the thermal conductivity of MEPCMs-5 wt % BNNSs increases by 63.76% at 25 °C. The PW@PS/BNNS powder possesses a latent heat capacity of 166.3 J/g, corresponding to a high encapsulation ratio of 80.77%. These properties endow the prepared MEPCMs with excellent thermal regulation properties. We also propose the formation mechanism of PW@PS/BNNS MEPCMs via Pickering emulsion polymerization for the first time, which will guide the MEPCM fabrication toward a reliable direction.

Efficacy of Electrospun Nanofiber Membranes on Fouling Mitigation: A Review

Despite the advantages of high contaminant removal, operational flexibility, and technical advancements offered, the undesirable fouling property of membranes limits their durability, thus posing restrictions on their usage. An enormous struggle is underway to conquer this major challenge. Most of the earlier reviews include the basic concepts of fouling and antifouling, with respect to particular separation processes such as ultrafiltration, nanofiltration, reverse osmosis and membrane bioreactors, graphene-based membranes, zwitterionic membranes, and so on. As per our knowledge, the importance of nanofiber membranes in challenging the fouling process has not been included in any record to date. Nanofibers with the ability to be embedded in any medium with a high surface to volume ratio play a key role in mitigating the fouling of membranes, and it is important for these studies to be critically analyzed and reported. Our Review hence intends to focus on nanofiber membranes developed with enhanced antifouling and biofouling properties with a brief introduction on fabrication processes and surface and chemical modifications. A summary on surface modifications of preformed nanofibers is given along with different nanofiller combinations used and blend fabrication with efficacy in wastewater treatment and antifouling abilities. In addition, future prospects and advancements are discussed.

Preparation and Tribological Properties of Self-Lubricating Epoxy Resins with Oil-Containing Nanocapsules

The design and development of self-lubricating materials aid in enhancing the tribological performance and prolonging the service life of aero self-lubricating spherical plain bearings. Herein, monodisperse hollow mesoporous carbon nanospheres (HMCNs) with thin shell thickness and uniform particle size were synthesized. Afterward, oil-containing nanocapsules (Oil@HMCNs) were obtained by the impregnation method, which was an innovative approach to prepare nanoscale capsules. The Oil@HMCNs were monodispersed, and the oil content rate could reach 45 wt %. The nanocapsules were applied as additives to achieve the self-lubricating properties of epoxy resin (EP). It was revealed that the coefficient of friction (COF) and the wear rate of EP in dry friction can be decreased from 0.56 to 0.084 and from 50.15 × 10^-6 to 0.27 × 10^-6 mm³/N/m, respectively. The tribological properties of EP composites in dry friction are better than those of EP with external oil. According to the analysis of friction pairs, the antifriction performance was contributed by the released automatic transmission fluid 6HP (ATF6) from nanocapsules. Meanwhile, the presence of ATF6 effectively could inhibit fatigue wear, and the decrease of compressive strength and surface hardness led to plastic deformation and mechanical polishing. Both resulted in a lower wear rate of EP. In conclusion, this work explored the application possibility of hollow mesoporous materials in lubrication. The prepared EP composites exhibited excellent tribological performances and self-lubricating properties, which were expected to be applied to self-lubricating spherical plain bearings and other mechanical parts.