Super-hydrophilic TiO2-based coating of anion exchange membranes with improved antifouling performance

High-Performance Monovalent Selective Cation Exchange Membranes with Ionically Cross-Linkable Side Chains: Effect of the Acidic Groups

Inspired by the charge-governed protein channels located in the cell membrane, a series of polyether ether ketone-based polymers with side chains containing ionically cross-linkable quaternary ammonium groups and acidic groups have been designed and synthesized to prepare monovalent cation-selective membranes (MCEMs). Three acidic groups (sulfonic acid, carboxylic acid, and phenolic hydroxyl) with different acid dissociation constant (pKa) were selected to form the ionic cross-linking structure with quaternary ammonium groups in the membranes. The ionic cross-linking induced the nanophase separation and constructed ionic channels, which resulted in excellent mechanical performance and high cation fluxes. Interesting, the cation flux of membranes increased as the ionization of acidic groups increase, but the selectivity of MCEMs did not follow the same trend, which was mainly dependent on the affinity between the functional groups and the cations. Carboxyl group-containing MCEMs exhibited the best selectivity (9.01 for Li+/Mg2+), which was higher than that of the commercial monovalent cation-selective CIMS membrane. Therefore, it is possible to prepare stable MCEMs through a simple process using ionically cross-linkable polymers, and tuning acidic groups in the membranes provided an attractive approach to improving the cation flux and selectivity of MCEMs.

Electronanofiltration Membranes with a Bilayer Charged Structure Enable High Li+/Mg2+ Selectivity

Achieving separation of lithium and magnesium with similar radii is crucial for the current lithium extraction technology from salt lakes, which usually possess a high lithium-to-magnesium ratio. Herein, we proposed the facile sequential interfacial polymerization (SIP) approach to construct electronanofiltration membranes (ENFMs) with a bilayer charged structure consisting of a high positively charged surface and a negatively charged sublayer. The trimesoyl chloride (TMC) concentration was adjusted to enhance the -COOH content and negative charge of the polyamide sublayer to promote Li+ migration, and then the quaternized polyethylenimine was introduced to the membrane surface by the SIP process to increase the positive charge density on the surface of the ENFMs, which would block the migration of Mg2+ and enhance the Li+/Mg2+ selectivity of the ENFMs. The optimal quaternary-modified ENFMs achieved outstanding selectivity for Li+/Mg2+ (49.85) and high Li+ flux (4.10 × 10-8 mol cm-2 s-1) at a current density of 10 mA cm-2. Moreover, in simulated brines with low lithium concentration and high Mg2+/Li+ ratio, the optimal ENFMs also displayed elevated Li+/Mg2+ selectivity (>45), highlighting the substantial promise of the membranes for practical applications.

In situ oxidized TiO2/MXene ultrafiltration membrane with photocatalytic self-cleaning and antibacterial properties

Self-cleaning, antimicrobial ultrafiltration membranes are urgently needed to alleviate the low flux problems caused by membrane fouling in water treatment processes. In this study, in situ generated nano-TiO₂ MXene lamellar materials were synthesized and then 2D membranes were fabricated using vacuum filtration. The presence of nano TiO₂ particles as an interlayer support layer widened the interlayer channels, and also improved the membrane permeability. The TiO₂/MXene composite on the surface also showed an excellent photocatalytic property, resulting in enhanced self-cleaning properties and improved long-term membrane operational stability. The best overall performance of the TiO₂/MXene membrane at 0.24 mg cm^-2 loading was optimal, with 87.9% retention and 211.5 L m^-2 h^-1 bar^-1 flux at a filtration of 1.0 g L^-1 bovine serum albumin solution. Noticeably, the TiO₂/MXene membranes showed a very high flux recovery under UV irradiation with a flux recovery ratio (FRR) of 80% as compared to the non-photocatalytic MXene membranes. Moreover, the TiO₂/MXene membranes demonstrated over 95% resistance against E. coli. And the XDLVO theory also showed that the loading of TiO₂/MXene slowed down the fouling of the membrane surface by protein-based contaminants.

Modification of Liquid Separation Membranes Using Multidimensional Nanomaterials: Revealing the Roles of Dimension Based on Classical Titanium Dioxide

Membrane technology has become increasingly popular and important for separation processes in industries, as well as for desalination and wastewater treatment. Over the last decade, the merger of nanotechnology and membrane technology in the development of nanocomposite membranes has emerged as a rapidly expanding research area. The key motivation driving the development of nanocomposite membranes is the pursuit of high-performance liquid separation membranes that can address the bottlenecks of conventionally used polymeric membranes. Nanostructured materials in the form of zero to three-dimensions exhibit unique dimension-dependent morphology and topology that have triggered considerable attention in various fields. While the surface hydrophilicity, antibacterial, and photocatalytic properties of TiO₂ are particularly attractive for liquid separation membranes, the geometry-dependent properties of the nanocomposite membrane can be further fine-tuned by selecting the nanostructures with the right dimension. This review aims to provide an overview and comments on the state-of-the-art modifications of liquid separation membrane using TiO₂ as a classical example of multidimensional nanomaterials. The performances of TiO₂-incorporated nanocomposite membranes are discussed with attention placed on the special features rendered by their structures and dimensions. The innovations and breakthroughs made in the synthesis and modifications of structure-controlled TiO₂ and its composites have enabled fascinating and advantageous properties for the development of high-performance nanocomposite membranes for liquid separation.

A Study on Biofouling and Cleaning of Anion Exchange Membranes for Reverse Electrodialysis

This study covers the modification, (bio)fouling characterization, use, and cleaning of commercial heterogeneous anion exchange membranes (AEMs) to evaluate their feasibility for reverse electrodialysis (RED) applications. A surface modification with poly (acrylic) acid resulted in an improved monovalent perm-selectivity (decreased sulfate membrane transport rate). Moreover, we evaluated the (bio)fouling potential of the membrane using sodium dodecyl sulfate (SDS), sodium dodecyl benzenesulfonate (SDBS), and Aeromonas hydrophila as model organic foulants and a biofoulant, respectively. A detailed characterization of the AEMs (water contact angle, ion exchange capacity (IEC), scanning electron microscopy (SEM), cyclic voltammetry (CV), and Fourier Transform Infrared (FTIR) spectra) was carried out, verifying that the presence of such foulants reduces IEC and the maximum current obtained by CV. However, only SDS and SDBS affected the contact angle values. Cleaning of the biofouled membranes using a sodium hypochlorite aqueous solution allows for (partially) recovering their initial properties. Furthermore, this work includes a fouling characterization using real surface and sea water matrixes, confirming the presence of several types of fouling microorganisms in natural streams. A lower adhesion of microorganisms (measured in terms of total bacteria counts) was observed for the modified membranes compared to the unmodified ones. Finally, we propose a cleaning strategy to mitigate biofouling in AEMs that could be easily applied in RED systems for an enhanced long-term process performance.