A novel strategy for ketorolac detection based on turn-on plasmonic enhanced FRET synchronous fluorometric sensor employing micellized chitosan/ AgNPs nanocomposites: Preparation and mechanism investigation

El Hamd M, Alshehri S, Helmy MI. Bioinspired Carbon Dots-Based Fluorescent Sensor for the Selective Determination of a Potent Anti-Inflammatory Drug in the Presence of Its Photodegradation Products

Herein, we synthesized biogenic carbon dots (CDs) with blue-shifted maximum excitation (λex/λem of 320/404 nm) from largely wasted tangerine seeds for the first time via a one-step hydrothermal method. The biogenic CDs exhibit a maximum excitation wavelength that overlaps with the absorption spectrum of ketorolac tromethamine (KETO) at 320 nm. The developed CDs serve as a turn-off fluorescent probe via an inner filter effect (IFE) quenching mechanism. The resulting CDs have high quantum yield (QY) (39% ± 2.89%, n = 5) and exhibited great performance toward KETO over a concentration range of 0.50-16.00 μg/mL with a limit of detection (LOD) = 0.17 μg/mL. The nanoprobe achieved a high % recovery in assaying KETO in tablet dosage form and had not been significantly affected by various interferents including co-formulated and co-administered drugs. The nanoprobe shows selectivity toward KETO, even in the presence of its photocatalytic degradation products. It can effectively investigate the elimination of KETO from aquatic systems and test its stability in pharmaceutical preparations. The developed nanoprobe underwent a comprehensive evaluation of its environmental impact using analytical eco-scale (AES), complex green analytical procedure index (Complex GAPI), and the Analytical GREEnness calculator (AGREE). The sustainability of the developed nano sensor was assessed and compared to the reported metal-based quantum dots probe for KETO using the innovative RGB 12 model, considering 12 white analytical chemistry (WAC) perspectives.

Simple colorimetric paper-based test strip for point-of-use quality testing of ethanol-based hand sanitizers

A novel, simple, affordable, and reliable colorimetric paper-based analytical device (PAD) was developed for the point-of-use quality testing of ethanol-based hand sanitizers, mainly against adulteration by water. The principle was based on the novel solvatochromism of methylparaben (MPB)-Fe3+ complex, where water is essential for complex formation and ethanol is necessary for MPB solubility. The intensity of the formed violet color, measured at 528 nm, showed a good correlation (R2 = 0.996) with the percentage water in the reaction media over a range from 40% to 100% (0-60% ethanol), with excellent accuracy and precision as indicated by the percent recovery within 100.00% ± 2% and %RSD of <2%. A PAD was prepared by the sequential immobilization of Fe3+ ions and MPB on chitosan-modified filter paper. The developed PAD was successfully applied for the quality testing of ethanol-based hand sanitizers using an established color index, where clearly distinct colors were observed as a function of the percentage ethanol (0-100%). The developed test strips could achieve on-site lab-quality results without expensive or sophisticated instruments using a few milligrams of FeCl3 and MPB in addition to regular filter paper. Accordingly, it can be used as a test strip for the quality checking of ethanol-based hand sanitizers by end users.

Rapid environmentally benign label free detection of heparin using highly fluorescent N,S-CDs sensing probe through a turn-on mechanism

Heparin (HEP) is one of the oldest anticoagulant drugs that currently still in widespread clinical use. It lacks chromophore and not easily derivatized due to its hydrophilic nature. In this work we developed a green, selective, and sensitive fluorescence sensor for detection of HEP in its injection dosage forms. The sensor is composed of nitrogen and sulfur co-doped carbon quantum dots (N,S-CDs) semi quenched by Fe3+. The N,S-CDs were prepared using microwave assisted pyrolysis in 3.5 min and exhibited high emission at 425 nm after excitation at 350 nm with high quantum yield of 96%. Owing to the anionic nature of HEP, it could compete with N,S-CDs for Fe3+ complexation resulting in turning-on the quenched fluorescence. This fluorescence enhancement was linear over a concentration range between 6 and 20 μg/mL (R2 = 0.99) with a limit of detection of 1.41 µg/ml. The accuracy and precision of the proposed sensor were indicated by percentage recovery values between 98% -102% and %RSD less than 2, respectively. Furthermore, the proposed sensor was successfully applied for determination of HEP in injection dosage form. The developed sensor showed excellent greenness on analytical eco-scale (score 93%) and GAPI scale.

A selective dual quenching sensor (EY/BG@CDs) for simultaneous monitoring of gentamicin and ketorolac levels in plasma: a highly efficient platform that caters to the needs of therapeutic drug monitoring

This research work introduces a novel sensor that utilizes two fluorophores to enable simultaneous monitoring of gentamicin sulphate (GNT) and ketorolac tromethamine (KET). The innovative sensor is composed of carbon dots (CDs) derived from black grapes (BG) and eosin Y (EY) dye. The interaction between the studied drugs and EY/BG@CDs sensor components allows for their simultaneous detection where GNT quenches the fluorescence of EY at 535 nm without affecting the fluorescence of CDs, while KET quenches the fluorescence of BG@CDs at 385 nm without impacting EY fluorescence. The BG@CDs probe was successfully characterized using various techniques such as absorption spectrophotometry, spectrofluorimetry, TEM imaging, infrared spectroscopic analysis, and XRD analysis. The suggested methodology was observed to be highly sensitive for the simultaneous determination of GNT and KET in their spiked rabbit plasma samples, with wide linear ranges and low limit of detection (LOD) values. The studied drugs were extracted using a highly selective extraction method involving protein precipitation followed by mixed mode solid phase extraction using an Oasis WCX cartridge. The simultaneous determination of GNT and KET is essential due to the potential interactions between the studied drugs. Therefore, this analysis can be used to evaluate the necessity of dose monitoring and the potential adverse effects of co-administration of these drugs.

Plasmon-Exciton Coupling Effect in Nanostructured Arrays for Optical Signal Amplification and SARS-CoV-2 DNA Sensing

A surface plasmon resonance (SPR)-enhanced optical signal using a nanoslit array and acridine orange (AO) dye system at a flexible poly(dimethylsiloxane) (PDMS) substrate was achieved in this work and demonstrated a simple sensing scheme to directly detect SARS-CoV-2 nucleic acid via DNA hybridization. A simple nanoimprinting pattern transfer technique was introduced to form uniform reproducible nanoslit arrays where the dimensions of the slit array were controlled by the thickness of the gold film. The plasmon-exciton coupling effect on the optical enhancement of different dye molecules, i.e., AO, propidium iodide (PI), or dihydroethidium (DHE) attached to the nanoslit surfaces, was examined thoroughly by measuring the surface reflection and fluorescence imaging. The results indicate that the best overlap of the plasmon resonance wavelength to the excitation spectrum of AO presented the largest optical enhancement (∼57×) compared to the signal at flat gold surfaces. Based on this finding, a sensitive assay for detecting DNA hybridization was generated using the interaction of the selected SARS-CoV-2 ssDNA and dsDNA with AO to trigger the metachromatic behavior of the dye at the nanoarray surfaces. We found strong optical signal amplification on the formation of acridine-ssDNA complexes and a quenched signal upon hybridization to the complementary target DNA (ct-DNA) along with a blue shift in the fluorescence of AO-dsDNAs. A quantitative evaluation of the ct-DNA concentration in a range of 100-0.08 nM using both the reflection and emission imaging signals demonstrated two linear regimes with a lowest detection limit of 0.21 nM. The sensing method showed high sensitivity and distinguished signals from 1-, 2-, and 3-base mismatched DNA targets, as well as high stability and reusability. This approach toward enhancing optical signal for DNA sensing offers promise in a general, rapid, and direct vision detection method for nucleic acid analytes.

Construction of multifunctional NH2-UiO-66 metal organic framework: sensing and photocatalytic degradation of ketorolac tromethamine and tetracycline in aqueous medium

Existence of pharmaceutical residues in water has endangered environmental pollution worldwide, which makes it ineludible to develop prospective bifunctional materials which not only possess excellent fluorescence behaviour to monitor pharmaceuticals but also exhibit simultaneous photocatalytic removal efficiency. Strengthened by functionalized metal organic framework (MOF) materials, we present here an amine functionalized zirconium-based MOF NH₂-UiO-66 which has been successfully synthesized using solvothermal approach. The as prepared MOF was subjected to numerous structural, morphological and compositional characterizations. Interestingly, featured by the excellent fluorescent intensity of MOF modulated by LMCT effect, NH₂-UiO-66 was screened to detect pharmaceutical compounds with KTC and TC in aqueous solution. The prepared functionalized MOF showcased excellent sensing platform with magnificent response range (0‒3 µM), lower limit of detection (160 nM; KTC and 140 nM; TC), excellent selectivity and influential anti-interference capability. More importantly, the practical utility of the proposed sensor was further explored for the determination of pharmaceutical drugs in real water samples with suitable recoveries. Simultaneously, the synthesized MOF also exhibited high photocatalytic efficiency towards the removal of KTC and TC under solar light irradiation. The degradation efficiency for KTC and TC was found to be 68.3% and 71.8% within 60 and 280 min of solar light, respectively. Moreover, excellent recyclability was demonstrated by the current synthesized system over five cycles. Overall, this study presents a feasible route for the utilization of functionalized MOFs as potential dual functional materials towards the simultaneous detection and degradation of specific pharmaceuticals from aqueous medium.

A Critical Review of Analytical Applications of Chitosan as a Sustainable Chemical with Functions Galore

Biomass and biowastes stand as sustainable and cost-effective environmentally benign alternative feedstock. Chitosan is a biocompatible, bioactive, and biodegradable biopolymer derived from chitin to achieve eight aspects out of the 12 green chemistry principles. Chitosan got significant attention in several fields including chemical analysis, in addition to chemical functionally, which enabled its use as adsorbent and its structural crosslinking using various crosslinkers. The physicochemical, technological, and optical properties of chitosan have been extensively exploited in analysis. Mainly, deacetylation degree and molecular weight are controlling its properties and hence controlling its functions. This review presents a structure, properties, and functions relationships of chitosan. It also aims to provide an overview of the different functions that chitosan can serve in each analytical technique such as supporting matrix, catalyst…etc. The contribution of chitosan in improving the ecological performance is discussed in each technique.

Polyamine receptors containing anthracene as fluorescent probes for ketoprofen in H2O/EtOH solution

Triamine receptors containing anthracene units are able to bind and sense ketoprofen via fluorescence enhancement in a H₂O/EtOH 50 : 50 (Vol : Vol) mixture exploiting their protonation features, which are tuned by the interaction with the analyte.

A highly sensitive switch-on spectrofluorometric method for determination of ascorbic acid using a selective eco-friendly approach

Ascorbic acid has recently been extensively used due to its role in the management of COVID-19 infections by stimulating the immune system and triggering phagocytosis of the corona virus. The currently used spectrofluorometric methods for determination of ascorbic acid require using derivatizing agents or fluorescent probes and suffer from a number of limitations, including slow reaction rates, low yield, limited sensitivity, long reaction times and high temperatures. In this work, we present a highly sensitive spectrofluorometric method for determination of ascorbic acid by switching-on the fluorescence of salicylate in presence of iron (III) due to a reduction of the cation to iron (II). The addition of ascorbic acid resulted in a corresponding enhancement in the fluorescence intensity of iron (III)-salicylate complex at emission wavelength = 411 nm. The method was found linear in the range of 1-8 µg/mL with a correlation coefficient of 0.9997. The limits of detection and quantitation were 0.035 µg/mL and 0.106 µg/mL, respectively. The developed method was applied for the determination of ascorbic acid in the commercially available dosage form; Ruta C60® tablets. The obtained results were compared with those obtained by a reported liquid chromatographic method at 95% confidence interval, no statistically significant differences were found between the developed and the reported methods. Yet, the developed spectrofluorometric method was found markedly greener than the reference method, based on the analytical Eco-scale and the green analytical procedure index. This work presents a simple, rapid and sensitive method that can possibly be applied for determination of ascorbic acid in pharmaceuticals, biological fluids and food samples.