Corrosion inhibition behavior of piperidinium based ionic liquids on Q235 steel in hydrochloric acid solution: Experimental, density functional theory and molecular dynamics study

Experimental and computational studies of novel cyclic ammonium based ionic liquids as corrosion inhibitors for carbon steel in acid medium

The challenge of corrosion posed as a result of acidic sittings is considered as a major industrial concern, wherein ionic liquids serve as crucial in addressing the corrosive impacts on metals. In this study, five selected cyclic ammonium based ionic liquids were synthesized; IL-1MPyrBr, IL-1MPipBr, IL-2PyBr, IL-3MPyBr and IL-4MPyBr and their chemical structures were characterized using a variety of spectroscopic techniques (FT-IR, IH-NMR, 13C-NMR, Elemental analysis and thermal gravimetric analysis (TGA). Their corrosion inhibition efficiency was studied on carbon steel in 1 M HCl via different concentrations at 298 K using chemical and electrochemical parameters (PDP and EIS). DFT quantum parameters were computed, and the noted results were in complete compatible with the experimental. The synthesized ILs recorded excellent inhibition on the carbon steel corrosion in acidic media with increasing efficiency by increasing the inhibitor concentrations from 20 to 100 ppm. Different cations in the synthesized ILs affect the anti-corrosion effect and IL-3MPyBr showed the highest inhibition (ηR); 96.12% using the lowest concentration. Kinetic and thermodynamic considerations were studied and illustrated.

An electrochemical, and surface studies of synthesized Gemini ionic liquid as corrosion inhibitor for carbon steel in petroleum field

In this work, we study the efficiency of N1, N3-dibenzyl-N1, N1, N3, N3-tetramethylpropane-1,3-diaminium chloride, as anticorrosion. This compound exhibits potential as a prospective remedy to stop the deterioration of carbon steel caused by corrosion in 1.0 M HCl. The synthesis of this compound is described in a comprehensive manner, and its composition is supported by a range of precise analytical approaches such as elemental analysis, and mass spectroscopy. Based on the findings of the investigation, the synthesized Gemini ionic liquid demonstrates a robust capacity to slow down the rate at which the metal corrodes. The Prepared compound was evaluation by electrochemical and morphology study. Our results revealed that elevating the inhibitor concentration led to an augmentation in inhibition effectiveness, reaching up to 94.8% at 200 ppm of the synthesized compound at 298 K. It is crucial to emphasize that the recently prepared Gemini ionic liquid is consistent with the Langmuir adsorption model and function as a mixed inhibitor, participating in the physio-chemisorption process of adsorption.

Investigation of the corrosion inhibition potentials of some 2-(4-(substituted)arylidene)-1H-indene-1,3-dione derivatives: density functional theory and molecular dynamics simulation

Background

Corrosion is a threat to material strength and durability. Electron-rich organic inhibitor may offer good corrosion mitigation potentials. In this work, anti-corrosion potentials of nine derivatives of 1H-indene-1,3-dione have been investigated using density functional theory (DFT) approach and molecular dynamics (MD) simulation. Chemical reactivity descriptors like energies of lowest unoccupied molecular orbital (ELUMO), highest occupied molecular orbital (EHOMO), electron affinity (A), ionization potential (I), energy gap (ΔEgap), global hardness (η), global softness (σ), electronegativity (χ), electrophilicity (ω), number of transferred electrons (ΔN) and back-donation (ΔEback-donation) were computed at DFT/B3LYP/6-31G(d) theoretical level. The local reactive sites and the charge partitioning on the compounds were studied using Fukui indices and molecular electrostatic potential (MEP) surface analysis. The adsorption behavior and the binding energy of the inhibitors on Fe (110) surface in hydrochloric acid solution were investigated using MD simulation.

Results

The high chemical reactivity, kinetic instability and good corrosion inhibition potentials demonstrated by the inhibitors are rationalized based on their high EHOMO, A, σ, ΔN, ΔEback-donation, and low ΔEgap, ELUMO, I and η. A wide difference of approximately 2.4–3.2 eV between the electronegativities of iron and the 1H-inden-1,3-diones suggests good charge transfer tendency from the latter to the low-lying vacant d-orbitals of iron. The heteroatoms (O and N) and the aromatic moieties are the nucleophilic sites on the inhibitors for effective adsorption on the metal surface as shown by condensed Fukui dual functions and MEP analysis. The MD simulation shows good interaction and strong binding energy between the inhibitor and Fe (110) surface.

Conclusions

Effective surface coverage and displacement of H3O+, Cl− and water molecules from Fe (110) surface by the inhibitors indicate good corrosion inhibition properties of the inden-1,3-diones. 2-((4,7-dimethylnaphthalen-1-yl)methylene)-1H-indene-1,3(2H)-dione display low energy gap, strongest binding interaction and most stabilized iron-inhibitor configuration, hence, the best anti-corrosion potential.

Graphical abstract

Environmental Remediation through Catalytic Inhibition of Steel Corrosion by Schiff’s Bases: Electrochemical and Biological Aspects

The environmental impact of corrosion is very dangerous and consumes much of world’s efforts and funds. This work discusses the safeguarding of the environment, metals, and metal-infra structures by efficient Schiff’s base inhibitors. The corrosion inhibitors [(1E,3E)-N1,N3-dibutyl-1-(thiophen-2-yl)butane-1,3-diimine] (GSB-I) and [(1Z,3Z)-N1,N3-bis(4-methylhexan-2-yl)-1-(thiophen-2-yl)butane-1,3-diimine] (GSB-II) were successfully synthesized and evaluated for the protection of API 5L X65 steel (CS) in 1 M HCl media using electrochemical techniques, SEM/EDS, and quantum chemical calculations. GSB-I and GSB-inhibitory I’s efficiency is proportional to the concentration of the test. In the presence of 1 mM GSB-I and GSB-II, the maximum inhibitory efficiency was determined to be 90.6 and 93.8 percent, respectively. According to potentiodynamic polarization tests, the two compounds are effective inhibitors of mixed-type corrosion. The physisorption and chemisorption of both inhibitors followed the Langmuir adsorption isotherm on CS surfaces. The biological reactivity of both GSB has been examined, and encouraging results have been obtained as antifungal, antibacterial, and biocidal agents against sulfate-reducing bacteria (SRB). In addition, using DFT calculations and molecular dynamic (MD) simulation, the effect of GSB-I and GSB-II molecular configuration on corrosion inhibition behavior in acidic environments was investigated.

Enhanced Corrosion Resistance of Carbon Steel in Hydrochloric Acid Solution by Polyoxometalate-Estertin Derivatives

The development of acid-resistant and efficient corrosion inhibitors is of great significance for metal protection in many industrial processes. In this work, eight cases of sandwich-type polyoxometalate (POM)-based inorganic-organic hybrids, namely, carboxyethyltin and transition metal (TM) cofunctionalized tungstoantimonates and tungstobismuthates, formulated as Na _x K_10-x [(SnR)₂(TM(H₂O)₃)₂(B-β-SbW₉O₃₃)₂]·mH₂O and Na _y K_10-y [(SnR)₂(TM(H₂O)₃)₂(B-β-BiW₉O₃₃)₂]·nH₂O (abbreviated as SbW₉-TM-SnR and BiW₉-TM-SnR; TM = Mn, Co, Ni, and Zn; m = 18, 24, 24, and 22; n = 30, 25, 20, and 21; SnR = Sn(CH₂CH₂COO)) are first used as green corrosion inhibitors for 20^# carbon steel in 0.5-2.0 M HCl solutions. Weight loss and electrochemical experiments prove that the corrosion inhibition efficiency is all above 81% for these POM-based corrosion inhibitors at 150 mg L^-1, and SbW₉-Mn-SnR shows the highest efficiency of 96.9% at 150 mg L^-1 after immersion in a 0.5 M HCl solution for 10 h. Scanning electron microscopy-energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy analyses show that these POM-based inhibitors form films on the carbon steel and the adsorption mechanism obeys the Langmuir adsorption model. The thermodynamic activation parameters were calculated, proving the occurrence of both chemical and physical adsorptions. The film-forming mechanism was also analyzed. This work provides guidance for synthesizing new lacunary POM-based materials to protect metals from corrosion in HCl pickling.

Insight into the anti-corrosion performance of two food flavors as eco-friendly and ultra-high performance inhibitors for copper in sulfuric acid medium

2,5-dihydroxy-1,4-dithiane (DDD) and 2,5-dimethy- [1.4] dithiane-2,5-diol (DTDD) two food flavors as environmentally-friendly inhibitors for Cu in 0.5 mol/L H₂SO₄ media were researched via theoretical calculation and experimental ways. Electrochemical measurement data showed that DDD and DTDD can exhibit high level anti-corrosion feature. The anti-corrosion efficiency of DDD and DTDD were as high as 99.6% and 98.9%, respectively. The atomic force microscope (AFM) and scanning electron microscope (SEM) tests showed that the Cu specimens were immersed in the H₂SO₄ with 5 mM DDD and DTDD for 30 h at the 298 K, and the Cu specimen surface was still smooth. Besides, the adsorption of DDD and DTDD at the interface of Cu/solution was comply with Langmuir adsorption. Theoretical calculation data showed that DDD exhibit more ascendant anti-corrosion feature than DTDD.