Selective adsorption of Na2ATP as an eco-friendly depressant on the calcite surface for effective flotation separation of cassiterite from calcite

Removal of Silicon from Magnesite by Flotation: Influence of Particle Size and Mechanical Mechanism

The feasibility of producing high-density sintered magnesia with a one-step sintering method was investigated by utilizing finely ground magnesite as raw materials for direct flotation. The mechanism of flotation desilication of microfine grain magnesite was investigated by combining microstructure and chemical properties. The results showed that dodecylamine (DDA) has a sorting effect on magnesite reverse flotation desilication. Under the premise of 150 mg/L sodium polyacrylate (PAANa) as an inhibitor and 300 mg/L DDA as a collector, the content and recovery rate of MgO can reach 83.91% and 78.78%, respectively. When sodium oleate (NaOL) was used as a collector, the recovery rate of MgO was only 49.22%; therefore, it is unsuitable for magnesite purification. The flotation effect was affected because MgO particles and SiO2 particles agglomerated in the flotation process. The flotation agent cannot work for a single element but works for the mineral agglomerate. While collecting Si elements, the agglomerated MgO was also brought into the froth layer, making flotation impossible.

Difficulties and Recent Achievements in Flotation Separation of Fluorite from Calcite—An Overview

As an important strategic non-metallic mineral resource, fluorite has been widely used in various industrial fields, such as metallurgy, optics and semiconductor manufacturing, as well as fluorine-related chemical engineering. Since the major gangue minerals of fluorite ore are silicate and carbonate ones, flotation is the main beneficiation method for the concentration. Compared with the relatively easy operation for silicate-type fluorite ore, fluorite concentration from calcite has always been the most difficult challenge in the field of mineral processing. In this review, analyses of the fundamental reasons for the difficulties of flotation separation of fluorite from calcite are performed, from the similar surface properties of both calcium minerals to the deterioration by the interference of dissolved ions in the pulp during grinding and flotation. Recent achievements in the flotation separation of fluorite from calcite as the main contents are comprehensively summarized, covering all aspects of flotation reagents of collectors, depressants and modifiers. Finally, successful examples of industrial practices forfluorite and calcite flotation separation are introduced. This overview provides a detailed and comprehensive reference source for the current research status of fluorite and calcite flotation separation, and some suggestions for future research are provided.