Dynamics of oligomerization of silicate solution studied by Molecular Dynamics

Excellent coagulation performance of polysilicate aluminum ferric for treating oily wastewater from Daqing gasfield: Responses to polymer properties and coagulation mechanism

The polysilicate aluminum ferric (PSAF) was synthesized via copolymerization of polysilicic acid (PSi), AlCl3 and FeCl3 for treating oily wastewater from Daqing gas field. This study investigated the effects of key preparation factors such as the degree of PSi's preactivation and the ratio of (Fe + Al)/Si and Al/Fe on both polymerization and coagulation performance exhibited by PSAF. To determine the optimal timing for introducing Al3+ and Fe3+, zeta potential, viscosity and particle size were investigated. Additionally, infrared spectroscopy, X-ray powder diffraction, polarizing microscopy and scanning electron microscope analysis were employed to investigate the structure and morphology of PSAF. The results indicate that under conditions characterized by a SiO2 mass fraction of 2.5% and pH = 4.5, an optimal timing for introducing Al3+ and Fe3+ is at 100 min when PSi exhibits moderate polymerization along with sufficient stability. When considering molar ratios such as (Al + Fe)/Si being 6:4 and Al/Fe being 5:5, respectively, PSAF falls within a "stable zone" enabling storage period up to 32 days. Moreover, Jar test results demonstrate that at a dosage of 200 mg/L PSAF for oily wastewater treatment in gas fields could reach the maximum turbidity removal efficiency up to 99.5% while oil removal efficiency reach 88.6% without pH adjustment. The copolymerization facilitates the formation of larger PSAF aggregates with positive potential, thereby augmenting the coagulants' adsorption bridging and charge neutralization capabilities. As a result, PSAF has great potential as a practical coagulant for treating oil-containing wastewater in industrial settings.

Insight into the role of excess hydroxide ions in silicate condensation reactions

The formation of silicate oligomers in the early stages is key to zeolite synthesis. The pH and the presence of hydroxide ions are important in regulating the reaction rate and the dominant species in solutions. This paper describes the formation of silicate species, from dimers to 4-membered rings, using ab initio molecular dynamics simulations in explicit water molecules with an excess hydroxide ion. The thermodynamic integration method was used to calculate the free energy profile of the condensation reactions. The hydroxide group's role is not only to control the pH of the environment, but also to actively participate in the condensation reaction. The results show that the most favorable reactions are linear-tetramer and 4-membered-ring formation, with overall barriers of 71 kJ mol^-1 and 73 kJ mol^-1, respectively. The formation of trimeric silicate, with the largest free-energy barrier of 102 kJ mol^-1, is the rate-limiting step under these conditions. The excess hydroxide ion aids in the stabilization of the 4-membered-ring structure over the 3-membered-ring structure. Due to a relatively high free-energy barrier, the 4-membered ring is the most difficult of the small silicate structures to dissolve in the backward reaction. This study is consistent with the experimental observation that silicate growth in zeolite synthesis is slower in a very-high-pH environment.