CoO modified porous boron nitride fibers for the adsorption and removal of chlortetracycline from aqueous solution

Controllable synthesis of porous boron nitride fibers modified by cobalt and nickel oxides for efficient ceftriaxone sodium adsorption from aqueous solution

Antibiotics can easily enter the water environment through direct or indirect approach, causing environmental pollution and endangering the health of organisms. Therefore, development of highly efficient adsorbent materials to adsorb and remove antibiotics is necessary. Here, cobalt oxide and nickel oxide are uniformly and tightly bonded on the surface of porous boron nitride fibers (PBNFs-NiCo), increasing the number of functional groups (B-O and N-H) and hydrogen bond receptors within PBNFs. The total pore volume and specific surface area of resulting PBNFs-NiCo can reach up to 0.48 cm3g-1and 720.3 m2g-1, respectively. Encouraged by the unique micromorphology and chemical composition mentioned above, PBNFs-NiCo exhibits excellent ceftriaxone sodium (CS) adsorption ability, showing the adsorption capacity and removal efficiency up to 410.9 mg g-1and 96.5%, respectively. Chemical adsorption plays an important role in their adsorption behavior, abiding by Langmuir adsorption theory and pseudo-second-order kinetic equation. Importantly, PBNFs-NiCo exhibits fascinating adsorption effects in surroundings with pH ranging from 4 to 6, 25 °C and varying salt concentrations. This work would establish a practical and feasible foundation for the practical application of PBNFs-NiCo for CS adsorption in aqueous solution.

Advances in boron nitride-based nanomaterials for environmental remediation and water splitting: a review

Boron nitride has gained wide-spread attention globally owing to its outstanding characteristics, such as a large surface area, high thermal resistivity, great mechanical strength, low density, and corrosion resistance. This review compiles state-of-the-art synthesis techniques, including mechanical exfoliation, chemical exfoliation, chemical vapour deposition (CVD), and green synthesis for the fabrication of hexagonal boron nitride and its composites, their structural and chemical properties, and their applications in hydrogen production and environmental remediation. Additionally, the adsorptive and photocatalytic properties of boron nitride-based nanocomposites for the removal of heavy metals, dyes, and pharmaceuticals from contaminated waters are discussed. Lastly, the scope of future research, including the facile synthesis and large-scale applicability of boron nitride-based nanomaterials for wastewater treatment, is presented. This review is expected to deliver preliminary knowledge of the present state and properties of boron nitride-based nanomaterials, encouraging the future study and development of these materials for their applications in various fields.

Comprehensive insight into adsorption of chlortetracycline hydrochloride by room-temperature synthesized water-stable Zr-based metal-organic gel/sodium alginate beads

Chlortetracycline hydrochloride (CTC) is one of the prevailing antibiotic pollutants that harm both environmental ecosystem and human health. Herein, Zr-based metal-organic gels (Zr-MOGs) with lower-coordinated active sites and hierarchically porous structures are fabricated via a facile straightforward room-temperature strategy for CTC treatment. More importantly, we incorporated the powder Zr-MOGs into low-cost sodium alginate (SA) matrix to achieve shaped Zr-based metal-organic gel/SA beads for enhancing the adsorption ability and ameliorating the recyclability. The Langmuir maximum adsorption capacities of Zr-MOGs and Zr-MOG/SA beads could reach 143.9 mg/g and 246.9 mg/g, respectively. What's more, in the manual syringe unit and continuous bead column experiments, Zr-MOG/SA beads could achieve an eluted CTC removal ratio as high as 93.6% and 95.5% in the real water sample, respectively. On top of that, the adsorption mechanisms were put forward as a combination of pore filling, electrostatic interaction, hydrophilic-lipophilic balance, coordination, π-π interaction as well as hydrogen bonding interaction. This study outlines a workable strategy for the facile preparation of candidate adsorbents for wastewater treatment.

Facile Hydrothermal Synthesis of Cu2MoS4 and FeMoS4 for Efficient Adsorption of Chlortetracycline

Contamination of antibiotics in an aqueous environment has attracted wide attention. Developing high-efficiency adsorbents for antibiotics removal is urgent. In this work, two kinds of ternary transition metal chalcogenides—Cu2MoS4 and FeMoS4 with superior adsorption performance were prepared by a facile hydrothermal synthesis method. The microstructure and physicochemical properties of the adsorbents were analyzed by X-ray diffraction (XRD), X-ray photoelectron spectroscope (XPS), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The as-prepared Cu2MoS4 and FeMoS4 were found to have dramatic potential for the adsorption of chlortetracycline (CTC) in an aqueous solution with an extremely high adsorption capacity. The Langmuir maximum adsorption capacity of Cu2MoS4 and FeMoS4 to CTC can reach 1203.81 and 2169.19 mg/g, respectively, which goes far beyond the common adsorbents as reported. Moreover, the adsorption kinetics, thermodynamics as well as adsorption mechanism were examined in detail by a batch of adsorption experiments.

Adsorption and Removal of Antibiotic Pollutants using CuO-Co3 O4 Co-modified Porous Boron Nitride Fibers in Aqueous Solution

The presence of antibiotic contaminants in aqueous environment already poses significant risks to ecological sustainability, biodiversity and human public health and safety. Therefore, it is urgent to develop practical water pollution control technologies and new materials. Here, we prepared CuO-Co₃ O₄ co-modified porous boron nitride fibers (P-BNFs) for the adsorption and removal of tetracycline antibiotics (TCs) in aqueous environment. The prepared adsorbents were characterized by XRD, FTIR, XPS, SEM, TEM and BET, and the adsorption behavior was explored by batch experiments. The results show that the removal percentage for doxycycline (DC) reaches 98.68 %, which was much higher than that of P-BNFs, and the modification results of P-BNFs with CuO or Co₃ O₄ alone. After five regeneration cycles, the removal rate of DC by CuO-Co₃ O₄ /P-BNFs was still as high as 89.33 %. This is promising and indicates that the prepared CuO-Co₃ O₄ /P-BNFs adsorbent has good renewable recycling performance and practical application prospects.

Developing visible light responsive BN/NTCDA heterojunctions with a good degradation performance for tetracycline

In this paper, a series of BN/NTCDA photocatalysts have been prepared using a simple calcination method and their photocatalytic performance under visible light irradiation is studied with tetracycline (TC) as the target pollutant.