The p-n heterojunction of BiVO4/Cu2O was decorated by plasma Ag NPs for efficient photoelectrochemical degradation of Rhodamine B

Plasma-assisted assembly of Co3O4/TiO2-NRs for photoelectrocatalytic degradation of bisphenol A in solution and muddy systems

Herein, Co3O4/TiO2-NRs electrodes with excellent photoresponse have been prepared via the plasma-assisted modification of Co3O4 on TiO2. With the combination of Co3O4 and TiO2, the composite electrode exhibited a red-shift phenomenon and the absorption of UV and visible light were enhanced to improve the light utilization efficiency. The Mott-Schottky diagram showed that a P-N heterojunction was successfully formed between Co3O4 and TiO2 on the electrode, which inhibited the recombination of electrons and holes, and had a high photocurrent density. In our photoelectrocatalysis (PEC) degradation experiments, the degradation rates of bisphenol A (BPA) by Co3O4/TiO2-NRs electrode in Na2SO4 and simulated seawater system reached 69.44 and 100%, respectively. The important role of ·O2-, ·OH, h+, and active chlorine (Cl·, HClO/ClO-, and Cl2) on the Co3O4/TiO2-NRs electrode during the degradation of BPA in simulated seawater was revealed. In addition, PEC combined with electrokinetic (EK) studies with the Co3O4/TiO2-NRs electrode were used for the degradation of BPA in muddy water, initially expanding the application scope of the PEC performance of the Co3O4/TiO2-NRs electrode for pollutants degradation, and had great potential for the subsequent treatment of muddy water pollutants.

Enhancement of charge separation and hole utilization in a Ni2P2O7-Nd-BiVO4 photoanode for efficient photoelectrochemical water oxidation

It is necessary for photoelectrochemical (PEC) water splitting to reduce the electron-hole recombination rate and enhance the water oxidation reaction kinetics. Here, we prepared Ni₂P₂O₇-Nd-BiVO₄ composite photoanodes by coupling Ni₂P₂O₇ co-catalysts to neodymium (Nd)-doped BiVO₄ surfaces through photo-assisted electrodeposition. The Ni₂P₂O₇-Nd-BiVO₄ photoanode exhibits a high photocurrent density of 3.6 mA cm^-2 at 1.23 V vs reversible hydrogen electrode (RHE), which is three times higher than that of the bare BiVO₄ (1.2 mA cm^-2). Detailed characterizations demonstrate that Nd doping reduces the band gap, significantly increases the carrier density and effectively reduces the charge transfer resistance. More importantly, the Ni₂P₂O₇ co-catalyst has multiple roles. Specifically, it can act as a hole extraction layer to accelerate hole migration and inhibit hole-electron recombination. At the same time, it significantly improves the water oxidation reaction kinetics. In addition, it also provides more water oxidation active sites. This work provides ideas for the design and study of efficient BiVO₄-based photoanodes.

Enhanced visible light driven photoelectrochemical degradation of tetracycline hydrochloride using a BiOI photoanode modified with MnO2 films

Removal of pharmaceuticals in wastewater has been the focus of many research due to the recalcitrant nature and hazardous effects of these compounds. The photoelectrochemical degradation process has proven to be suitable to harness solar energy for the mineralization of organic compounds in wastewater. Herein, we report the application of BiOI/MnO₂ heterostructured anode for the photoelectrochemical degradation of tetracycline hydrochloride in aqueous solution. The photoanode was prepared through electrodeposition technique and fully characterized through microscopic, spectroscopic and electrochemical techniques. The results showed that formation of p-n heterojunction between BiOI and MnO₂ in the photoanode led to improved charge separation which was evident in improved optical and photoelectrochemical properties. The FTO-BiOI/MnO₂ electrode attained a photocurrent density of 0.104 mA cm^-2 with applied potential of 1.0 V (vs Ag/AgCl) which was almost double that of pristine BiOI suggesting efficient charge separation. The heterostructured photoanode achieved 94% removal of tetracycline hydrochloride after 120 min through the PEC degradation process with 61% mineralization efficiency. The electrode showed good reusability and stability with 92% PEC removal after eight cycles. Hence, the FTO-BiOI/MnO₂ has a great potential as anode for PEC wastewater treatments.

The application of photoelectrocatalysis in the degradation of rhodamine B in aqueous solutions: a review

The pollution of the water environment by industrial effluents is an ongoing challenge due to the rate of industrialisation and globalisation. Photoelectrocatalysis (PEC), an electrochemical advanced oxidation process, has proven to be an effective method for removing organics from wastewater. Photoelectrocatalysis is environmentally benign, cost-effective and easy to operate. In this present review, we examine the recent progress in the removal of rhodamine B dye, a common constituent of textile effluent released into the environment, through photoelectrocatalytic degradation. We present a detailed discussion on the use of different kinds of unmodified and modified photoanodes that have been explored for the photoelectrocatalytic removal of this dye. More importantly, discussions are presented on the mechanisms and kinetics of the degradation of rhodamine B dye using these photoanodes. Hence, this review will be beneficial for researchers in developing future projects in the area of wastewater treatments through photoelectrocatalysis.

Porous BiVO4/Boron-Doped Diamond Heterojunction Photoanode with Enhanced Photoelectrochemical Activity

Constructing heterojunction is an attractive strategy for promoting photoelectrochemical (PEC) performance in water splitting and organic pollutant degradation. Herein, a novel porous BiVO4/Boron-doped Diamond (BiVO4/BDD) heterojunction photoanode containing masses of ultra-micro electrodes was successfully fabricated with an n-type BiVO4 film coated on a p-type BDD substrate by magnetron sputtering (MS). The surface structures of BiVO4 could be adjusted by changing the duration of deposition (Td). The morphologies, phase structures, electronic structures, and chemical compositions of the photoanodes were systematically characterized and analyzed. The best PEC activity with the highest current density of 1.8 mA/cm2 at 1.23 VRHE was achieved when Td was 30 min, and the sample showed the highest degradation efficiency towards tetracycline hydrochloride degradation (TCH) as well. The enhanced PEC performance was ascribed to the excellent charge transport efficiency as well as a lower carrier recombination rate, which benefited from the formation of BiVO4/BDD ultra-micro p-n heterojunction photoelectrodes and the porous structures of BiVO4. These novel photoanodes were expected to be employed in the practical PEC applications of energy regeneration and environmental management in the future.