Preparation and optimization of polyurethane/crosslinked poly acrylic acid semi-IPNs containing multi wall carbon nanotube applicable for artificial tendon

The engineering, drug release, and in vitro evaluations of the PLLA/HPC/Calendula Officinalis electrospun nanofibers optimized by Response Surface Methodology

A system based on poly(l-lactic acid) (PLLA) and hydroxypropyl cellulose (HPC) was considered in this study to achieve electrospun mats with outstanding properties and applicability in biomedical engineering. A novel binary solvent system of chloroform/N,N-dimethylformamide (CF/DMF:70/30) was utilized to minimize the probable phase separation between the polymeric components. Moreover, Response Surface Methodology (RSM) was employed to model/optimize the process. Finally, to scrutinize the ability of the complex in terms of drug delivery, Calendula Officinalis (Marigold) extract was added to the solution of the optimal sample (Opt.PH), and then the set was electrospun (PHM). As a result, the presence of Marigold led to higher values of fiber diameter (262 ± 34 nm), pore size (483 ± 102 nm), and surface porosity (81.0 ± 7.3 %). As this drug could also prohibit the micro-scale phase separation, the PHM touched superior tensile strength and Young modulus of 11.3 ± 1.1 and 91.2 ± 4.2 MPa, respectively. Additionally, the cumulative release data demonstrated non-Fickian diffusion with the Korsmeyer-Peppas exponent and diffusion coefficient of n = 0.69 and D = 2.073 × 10-14 cm2/s, respectively. At the end stage, both the Opt.PH and PHM mats manifested satisfactory results regarding the hydrophilicity and cell viability/proliferation assessments, reflecting their high potential to be used in regenerative medicine applications.

Synthesis and characterization of chitosan/collagen/polycaprolactone hydrogel films with enhanced biocompatibility and hydrophilicity for artificial tendon applications

Regenerative medicine confronts various obstacles, such as creating and advancing biomaterials. Besides being safe, such materials should promote cellular activity. Polycaprolactone (PCL) has numerous medical applications as an engineering material. However, these polymers lack hydrophilicity. Herein, chitosan (CS)/collagen (COL)/polycaprolactone hydrogel films (CSCPs) were synthesized with different weight ratios of PCL; specifically, CS/COL (CSC): PCL content of 1:3, 1:6, and 1:9. For this purpose, novel COL immobilization on CS was performed via covalent attachment. Following the addition of PCL to CSC hydrogel, the resulting CSCP hydrogel films were characterized using tensile measurements, TGA, XRD, FTIR, and FE-SEM. A greater PCL content increases the elongation at break from 134.8 to 369.5 % and the tensile strength of the hydrogel films from 4.8 to 18.4 MPa. The hydrophobicity of prepared specimens was assessed through water absorption and contact-angle tests. For CSCP3 to CSCP9, the water contact angle increased from 61.03° to 70.82°. After 48 days, CSCP6 and CSCP9 hydrogel films demonstrated a slow rate of degradation, losing <15 % of their weight. Moreover, all three types of hydrogel films exhibited high biocompatibility (higher than 95 % after three days), as confirmed by the MTT assay. The hemolysis rates of CSCP hydrogel films were <2 %, which could be deemed safe for contact with a blood environment. The presence of no costly and bio-based crosslinking agents and desired characteristics for tissue engineering applications suggest that CSCP hydrogel films may be promising candidates for use in artificial tendons.

Optimal Design of Carbon-Based Polymer Nanocomposites Preparation Based on Response Surface Methodology

Response surface methodology (RSM) and central composite design (CCD) were used to improve the preparation of carbon nanotube and graphene (CNT-GN)-sensing unit composite materials in this study. Four independent variable factors (CNT content, GN content, mixing time, and curing temperature) were controlled at five levels, and 30 samples were generated using the multivariate control analysis technique. On the basis of the experimental design, semi-empirical equations were developed and utilized to predict the sensitivity and compression modulus of the generated samples. The results reveal a strong correlation between the experimental and expected values of sensitivity and the compression modulus for the CNT-GN/RTV (room-temperature-vulcanized silicone rubber) polymer nanocomposites fabricated using different design strategies. The correlation coefficients for the sensitivity and compression modulus are R2 =0.9634 and R2=0.9115, respectively. The ideal preparation parameters of the composite in the experimental range include a CNT content of 1.1 g, a GN content of 1.0 g, a mixing time of 15 min, and a curing temperature of 68.6 °C, according to theoretical predictions and experimental findings. At 0~30 kPa, the CNT-GN/RTV-sensing unit composite materials may reach a sensitivity of 0.385 kPa−1 and a compressive modulus of 601.567 kPa. This provides a new idea for the preparation of flexible sensor cells and reduces the time and economic cost of experiments.

Designing Nanofibrous Poly(ε-caprolactone)/Hydroxypropyl Cellulose/Zinc Oxide/Melilotus Officinalis Wound Dressings Using Response Surface Methodology

Nanofibrous wound dressing is one of the most prominent stratagems for wound caring/management. This research is an approach for designing an electrospun wound dressing based on poly(ε-caprolactone)/hydroxypropyl cellulose/zinc oxide nanoparticles (PCL/HPC/n-ZnO), in which response surface methodology (RSM) was utilized to ascertain the optimum sample. It was observed that the addition of n-ZnO and Melilotus Officinalis (MO) extract could increase the fibers mean diameter, pore size, and crystallinity of mats. The mentioned quantities for a sample with the highest MO content (PHZM10) were equal to 469±105 nm, 544±370 nm, and 49.67%, respectively. Moreover, enhancing the amount of MO led to an increase in mechanical properties. In this respect, the PHZM10 sample had the modulus, strength, and toughness of 82.41±0.61, 20.45±0.30 MPa, and 4194.86 mJ, respectively. Also, according to the MTT assay, no cytotoxicity was reported from any of the manufactured samples. Besides, it was concluded that the antibacterial activity and nanofibrous structure of mats, and also their potential for release of MO extract could accelerate the wound healing. Hence, the wound closure index for the PHZM10 group was 99.3±1.1%. Based on all noted results, the PCL/HPC/n-ZnO/MO electrospun mats can be proposed as reassuring wound dressing candidates.