Improve the mechanical durability of superhydrophobic/superamphiphobic coating through multiple cross-linked mesh structure

Direct Write Printing of Ultraviolet-Curable Bulk Superhydrophobic Ink Material

Although superhydrophobic surfaces have various promising applications, their fabrication methods are often limited to 2D plane surfaces that are vulnerable to abrasion and have limited adhesion to the substrate. Herein, an ultraviolet (UV) curable ink with bulk superhydrophobicity, consisting of poly(dimethylsiloxane) (PDMS) resins, hydrophobic silica, and solvent (porogen), was successfully developed for UV-assisted direct write printing processing. After UV curing of the ink followed by solvent evaporation, the generated porous structure cooperates with silica particles to form a self-similar and hierarchical structure throughout the bulk material, which can keep its original morphology even after cyclic abrasion (over 1000 times) and thus exhibits durable superhydrophobicity. With this unique ink, UV-assisted direct write printing can not only create 2D superhydrophobic surfaces on various substrates (e.g., paper and wire mesh) but also fabricate self-supporting 3D superhydrophobic objects for various applications such as waterproofing and oil-water separation. The printed objects exhibited a stable superhydrophobicity against liquid corrosion and mechanical damage. In addition, the 3D printing approach can be used to optimize the oil-water separation performance of the superhydrophobic porous materials by tuning the pore size, thus presenting promising applications.

Tuning PVDF Membrane Porosity and Wettability Resistance via Varying Substrate Morphology for the Desalination of Highly Saline Water

Here, we report the fabrication of a series of highly efficient polyvinylidene fluoride (PVDF) membranes via substrate morphology variations. A wide range of sandpaper grit sizes (150-1200) were utilized as casting substrates. The effect of the penetration of abrasive particles present on the sandpapers on the casted polymer solution was tuned, and the impact of these particles on porosity, surface wettability, liquid entry pressure and morphology were investigated. The membrane distillation performance of the developed membrane on sandpapers was evaluated for the desalination of highly saline water (70,000 ppm). Interestingly, the utilization of cheap and widely available sandpapers as a substrate for casting can not only help in tuning the MD performance, but also in producing highly efficient membranes with stable salt rejection (up to 100%) and a 210% increase in the permeate flux over 24 h. The findings in this study will help in delineating the role of substrate nature in controlling the produced membrane characteristics and performance.