Dual Functionality of Ultralow Levels of a Model Kinetic Hydrate Inhibitor on Hydrate Particle Morphology and Interparticle Force

Study of Sintering Behavior of Methane Hydrate Particles on the Wall Surface

The sintering of hydrate aggregates on the pipe wall is a major form of hydrate deposition. Understanding the sintering behavior of hydrates on the wall is crucial for promoting hydrate safety management and preventing pipeline blockage. However, limited research currently exists on this topic. In this study, the cohesive force strength of hydrate particles on the wall surface under different conditions was directly measured using a high-pressure micromechanical force device (HP-MMF). Subsequently, the effects of subcooling and glycine on the cohesive force were investigated. The results indicate that the cohesive force is influenced by different growth states during the process of free water on the wall surface gradually growing into hydrate. Three states with larger measured values during the growth process were selected for research. Observation showed that increased subcooling strengthened sintering by accelerating the growth rate of the hydrate film, resulting in a significant increase in cohesive force. The role of glycine in the methane hydrate system was then evaluated. Glycine was found to reduce the degree of sintering by reducing the growth rate of the hydrate film, thereby decreasing the cohesive force. The optimal concentration in the system was determined to be 0.25 wt %. Moreover, compared with low subcooling (1 °C), glycine had a better effect at high subcooling (5 °C). At 5 °C subcooling and the optimal concentration, the cohesive force in the wall droplet state decreases from 677.38 to 489.02 mN/m, the cohesive force at the low-saturation state decreases from 951.79 to 543.32 mN/m, and the cohesive force at the high-saturation state decreases from 1194.95 to 641.76 mN/m. These findings contribute to a better understanding of the cohesive force behavior of gas hydrate on the inner wall of the pipeline and provide basic data for reducing the risk of hydrate blockage.

Probing interaction forces associated with calcite scaling in aqueous solutions by atomic force microscopy

The prevention of calcite aggregation and scaling remains a challenging problem in aqueous based systems and environmental science. Decades of research studies have proposed microscopic mechanisms of aggregation control, but experiments at the nanoscale and molecular level are rarely conducted. Here we show that the nanoscale topographic features of calcite during its aggregation depend significantly on the intermolecular and surface forces involved in this process. By measuring the forces between a calcite or silica particle and a calcite surface in aqueous solutions using atomic force microscopy, we found that higher solution pH and inhibitor concentration and lower salinity resulted in a system of stronger repulsion and weaker adhesion, which is favorable for reducing the possibility of calcite aggregation and surface deposition. Conflicting roles of Mg²⁺ in calcite aggregation prevention, being positive in acidic pH and negative in alkaline pH, were also observed. The nanoscale structural changes of calcite, visualized by atomic force microscopy or scanning electron microscopy, indicated a size dependence of aggregated and deposited calcite crystals on the calcite-calcite and calcite-silica interactions, respectively. The generalized framework of the calcite aggregation mechanism achieved in this work can be extended to other types of systems and provides a basis for investigating the anti-aggregation strategy of calcite from industrial and environmental perspectives.