Influence of hydroxyapatite particle characteristics on the [K]/[Na] ratio: a human monocytes in vitro study

Poly(vinyl alcohol) hydrogel coatings with tunable surface exposure of hydroxyapatite

Insufficient bone anchoring is a major limitation of artificial substitutes for connective osteoarticular tissues. The use of coatings containing osseoconductive ceramic particles is one of the actively explored strategies to improve osseointegration and strengthen the bone-implant interface for general tissue engineering. Our hypothesis is that hydroxyapatite (HA) particles can be coated robustly on specific assemblies of PVA hydrogel fibers for the potential anchoring of ligament replacements. A simple dip-coating method is described to produce composite coatings made of microscopic hydroxyapatite (HA) particles dispersed in a poly(vinyl alcohol) (PVA) matrix. The materials are compatible with the requirements for implant Good Manufacturing Practices. They are applied to coat bundles of PVA hydrogel fibers used for the development of ligament implants. By means of optical and electronic microscopy, we show that the coating thickness and surface state can be adjusted by varying the composition of the dipping solution. Quantitative analysis based on backscattered electron microscopy show that the exposure of HA at the coating surface can be tuned from 0 to over 55% by decreasing the weight ratio of PVA over HA from 0.4 to 0.1. Abrasion experiments simulating bone-implant contact illustrate how the coating cohesion and wear resistance increase by increasing the content of PVA relative to HA. Using pullout experiments, we find that these coatings adhere well to the fiber bundles and detach by propagation of a crack inside the coating. These results provide a guide to select coated implants for anchoring artificial ligaments.

Inflammatory cell response to calcium phosphate biomaterial particles: an overview

Bone is a metabolically active and highly organized tissue consisting of a mineral phase of hydroxyapatite (HA) and amorphous calcium phosphate (CaP) crystals deposited in an organic matrix. One objective of bone tissue engineering is to mimic the chemical and structural properties of this complex tissue. CaP ceramics, such as sintered HA and beta-tricalcium phosphate, are widely used as bone substitutes or prosthesis coatings because of their osteoconductive properties. These ceramic interactions with tissues induce a cell response that can be different according to the composition of the material. In this review, we discuss inflammatory cell responses to CaP materials to provide a comprehensive overview of mechanisms governing the integration or loosening of implants, which remains a major concern in tissue engineering. A focus on the effects of the functionalization of CaP biomaterials highlights potential ways to increase tissue integration and limit rejection processes.

Effect of strontium-substituted biphasic calcium phosphate on inflammatory mediators production by human monocytes

Calcium phosphate materials are widely used as bone substitutes because of their properties close to those of the mineral phase of bones. Nevertheless, after several months, calcium phosphate-based materials release particles that may be phagocytosed by monocytes, leading to an inflammatory reaction. Strontium is well known to counteract the osteoporosis process, but little is known about its effect on inflammatory processes. The purpose of this work was to study the effect of biphasic calcium phosphate (BCP) particles substituted with strontium on the inflammatory reaction. Human primary monocytes stimulated or not by lipopolysaccharide (LPS) were exposed to BCP particles containing strontium for 6 and 24 h. Inflammatory mediators (cytokines and matrix metalloproteinases (MMPs)) production was then quantified by ELISA and zymography. We observed that the presence of strontium had few effects on unstimulated cells, but it decreased the production of pro-inflammatory cytokines and the chemokine interleukin 8 in LPS-stimulated cell-conditioned medium. This work suggests for the first time that strontium may be involved in the control of inflammatory processes following BCP phagocytosis by human monocytes.

A new insight into the dissociating effect of strontium on bone resorption and formation

Calcium phosphates are widely used as biomaterials and strontium (Sr) is known to have the ability to modify the bone balance towards osteosynthesis. In the present study we investigated the capacity of Sr-substituted sol-gel calcium phosphate to modify the expression of genes and proteins involved in extracellular matrix synthesis by primary bone cells. We first determined the most effective concentration of strontium using human primary bone cells. Sol-gel biphasic calcium phosphate (BCP) powders were then synthesised to obtain release of the optimal concentration of strontium. Finally, human osteoblasts obtained from explant cultures were cultured in the presence of sol-gel BCP, Sr-substituted BCP (5% Sr-substituted BCP, corresponding to a release of 5×10(-5)M [Sr(2+)] under the culture conditions (BCP(5%))) and medium containing strontium chloride (SrCl(2)). Viability, proliferation, cell morphology, protein production and protein activity were studied. We demonstrated that 5×10(-5)M SrCl(2) and BCP(5%) increased the expression of type I collagen and SERPINH1 mRNA and reduced the production of matrix metalloproteinases (MMP-1 and MMP-2) without modifying the levels of the tissue inhibitors of MMPs (TIMPs). Thus strontium has a positive effect on bone formation.

Synthesis and characterisation of nanohydroxyapatite using an ultrasound assisted method

Nanostructured hydroxyapatite (HAP) was prepared by a wet precipitation method using Ca(NO(3)) and KH(2)PO(4) as the main material and NH(3) as the precipitator under ultrasonic irradiation. The Ca/P ratio was set at 1.67 and the pH maintained at a minimum of 9. The temperature conditions and ultrasound influences were investigated using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and Fourier transform infrared spectroscopy (FT-IR). The results showed that Nano-HAP can be obtained by this method and the particles were achieved to around 30 nm.

Involvement of toll-like receptor 4 in the inflammatory reaction induced by hydroxyapatite particles

Hydroxyapatite (HA) is widely used to coat metal parts in order to improve their biocompatibility. Analysis of retrieved tissues associated with failed implants, suggest that phagocytosis of HA wear debris by monocytes/macrophages might provide a potent stimulus for the release of a variety of cytokines. Phagocytosis involved a large variety of cellular receptors like toll-like receptors that results in activation of the transcriptional nuclear factor-kappaB (NF-kappaB) via a cell-signalling pathway. In the present paper, we aimed to evaluate the role of the toll-like receptor 4 (TLR4) in the production of inflammatory cytokines induced by HA particles using TLR4(+) and TLR4(-) peritoneal macrophages. We investigated the production of TNF-alpha and the activation of the nuclear transcription factor NF-kappaB. Our data clearly show for the first time that the production of TNF-alpha by macrophages exposed to HA particles was TLR4 dependent but not the activation of NF-kappaB. All these results open future therapies to reduce the inflammatory response induced by HA biomaterials.

Importance of the surface area ratio on cytokines production by human monocytes in vitro induced by various hydroxyapatite particles

A possible complication associated with the implantation of hydroxyapatite (HA)-based prosthesis is the release of particles. Those particles can be phagocyted by monocytes that are among the first cells to colonize the inflammatory site. The activated monocytes produce inflammatory mediators, such as cytokines, which cause osteoclasts activation. It has previously been demonstrated using a surface area ratio (ratio of the total surface of the given particles to the surface area of cells) of 1 to 1 that there was a correlation between the expression and production of cytokines induced by HA. The present work studies the effect of physical characteristics of HA particles on the production of various inflammatory cytokines (tumour necrosis factor-alpha, interleukin (IL)-6, and IL-8) and anti-inflammatory cytokine (IL-10). However, the experiments were performed using a surface area ratio of 10 to 1. Our data demonstrate that all the particles, whatever their characteristics, induced a high expression of cytokines but the production was different, meaning that there was a post-transcriptional regulation. The size and sintering temperature seemed to be a characteristics that were less important compared to the shape; the needle particles appeared to induce the most important production of all the cytokines studied.

The effect of the physical characteristics of hydroxyapatite particles on human monocytes IL-18 production in vitro

Hydroxyapatite (HA) is widely used to coat the metal parts of prosthetic implants in order to improve their biocompatibility and as a bone defect filling material. HA has been demonstrated to produce particles at the prosthetic interface that lead to an activation of phagocytic cells that induce a cascade reaction leading to bone resorption and aseptic loosening. Monocytes/macrophages are commonly observed in the interface tissue, and are among the first cells to colonize the inflammatory site where they play a key role in the immune response. IL-18 is a pro-inflammatory cytokine. Monocytes/macrophages were described as IL-18 producing cells. IL-18 works antagonistically to IL-6, which activates osteoclastogenesis. In the present study, we investigated the ability of HA particles to induce the production of active IL-18 by human monocytes according to particle characteristics (size, sintering temperature and shape). Our study demonstrates, for the first time, that HA particles are capable of stimulating the production of the proinflammatory cytokine IL-18 in human monocytes according to their particle characteristics. The expression and the production of IL-18 was modified by the parameter studied. The difference observed between the expression and the production could be explain by the production of ICE. The needle shaped particles induced the larger production of IL-18.