Effect of several sterilisation techniques on homogeneous self assembled monolayers

Lubricant skin on diverse biomaterials with complex shapes via polydopamine-mediated surface functionalization for biomedical applications

Implantable biomedical devices require an anti-biofouling, mechanically robust, low friction surface for a prolonged lifespan and improved performance. However, there exist no methods that could provide uniform and effective coatings for medical devices with complex shapes and materials to prevent immune-related side effects and thrombosis when they encounter biological tissues. Here, we report a lubricant skin (L-skin), a coating method based on the application of thin layers of bio-adhesive and lubricant-swellable perfluoropolymer that impart anti-biofouling, frictionless, robust, and heat-mediated self-healing properties. We demonstrate biocompatible, mechanically robust, and sterilization-safe L-skin in applications of bioprinting, microfluidics, catheter, and long and narrow medical tubing. We envision that diverse applications of L-skin improve device longevity, as well as anti-biofouling attributes in biomedical devices with complex shapes and material compositions.

Basic Principles of Emulsion Templating and Its Use as an Emerging Manufacturing Method of Tissue Engineering Scaffolds

Tissue engineering (TE) aims to regenerate critical size defects, which cannot heal naturally, by using highly porous matrices called TE scaffolds made of biocompatible and biodegradable materials. There are various manufacturing techniques commonly used to fabricate TE scaffolds. However, in most cases, they do not provide materials with a highly interconnected pore design. Thus, emulsion templating is a promising and convenient route for the fabrication of matrices with up to 99% porosity and high interconnectivity. These matrices have been used for various application areas for decades. Although this polymer structuring technique is older than TE itself, the use of polymerised internal phase emulsions (PolyHIPEs) in TE is relatively new compared to other scaffold manufacturing techniques. It is likely because it requires a multidisciplinary background including materials science, chemistry and TE although producing emulsion templated scaffolds is practically simple. To date, a number of excellent reviews on emulsion templating have been published by the pioneers in this field in order to explain the chemistry behind this technique and potential areas of use of the emulsion templated structures. This particular review focusses on the key points of how emulsion templated scaffolds can be fabricated for different TE applications. Accordingly, we first explain the basics of emulsion templating and characteristics of PolyHIPE scaffolds. Then, we discuss the role of each ingredient in the emulsion and the impact of the compositional changes and process conditions on the characteristics of PolyHIPEs. Afterward, current fabrication methods of biocompatible PolyHIPE scaffolds and polymerisation routes are detailed, and the functionalisation strategies that can be used to improve the biological activity of PolyHIPE scaffolds are discussed. Finally, the applications of PolyHIPEs on soft and hard TE as well as in vitro models and drug delivery in the literature are summarised.

Assessment of stability of surface anchors for antibacterial coatings and immobilized growth factors on titanium

Titanium (Ti) has been functionalized with biomolecules for biomedical purposes. However, there is very limited information on the stability of such functionalities. Ti surface functionalized with carboxymethyl chitosan (CMCS) and bone morphogenetic protein 2 (BMP-2) has been reported to inhibit bacterial colonization while at the same time enhances osteoblast functions. In this work, three types of anchoring molecules, (3-aminopropyl) triethoxysilane (Silane), dopamine (DA), and polydopamine (PDA), were used for immobilizing the CMCS on Ti. The CMCS-modified surfaces were subjected to 70% ethanol treatment, autoclaving, and prolonged immersion in phosphate buffered saline (PBS). After the treatment procedures, the ability of the CMCS-modified substrates to inhibit colonization by Staphylococcus epidermidis (S. epidermidis) was assessed to evaluate the stability of the immobilized CMCS. The bacterial adhesion assays showed that the CMCS-DA- and CMCS-PDA-modified Ti remained stable after 70% ethanol treatment, autoclaving, and prolonged immersion in PBS, whereas the CMCS-Silane-modified Ti was less stable after autoclaving and prolonged immersion in PBS. The CMCS-DA- and CMCS-PDA-modified Ti substrates were functionalized with BMP-2 and used to support osteoblast growth. Evaluation of alkaline phosphatase (ALP) activity and calcium deposition from osteoblasts cultured on these substrates, which have been treated with 70% ethanol, or subjected to autoclaving, and prolonged immersion in PBS indicated that the immobilized BMP-2 on these surfaces retained its bioactivity.

Effect of cleaning and sterilization on titanium implant surface properties and cellular response

Titanium (Ti) has been widely used as an implant material due to the excellent biocompatibility and corrosion resistance of its oxide surface. Biomaterials must be sterile before implantation, but the effects of sterilization on their surface properties have been less well studied. The effects of cleaning and sterilization on surface characteristics were bio-determined using contaminated and pure Ti substrata first manufactured to present two different surface structures: pretreated titanium (PT, Ra=0.4 μm) (i.e. surfaces that were not modified by sandblasting and/or acid etching); (SLA, Ra=3.4 μm). Previously cultured cells and associated extracellular matrix were removed from all bio-contaminated specimens by cleaning in a sonicator bath with a sequential acetone-isopropanol-ethanol-distilled water protocol. Cleaned specimens were sterilized with autoclave, gamma irradiation, oxygen plasma, or ultraviolet light. X-ray photoelectron spectroscopy (XPS), contact angle measurements, profilometry, and scanning electron microscopy were used to examine surface chemical components, hydrophilicity, roughness, and morphology, respectively. Small organic molecules present on contaminated Ti surfaces were removed with cleaning. XPS analysis confirmed that surface chemistry was altered by both cleaning and sterilization. Cleaning and sterilization affected hydrophobicity and roughness. These modified surface properties affected osteogenic differentiation of human MG63 osteoblast-like cells. Specifically, autoclaved SLA surfaces lost the characteristic increase in osteoblast differentiation seen on starting SLA surfaces, which was correlated with altered surface wettability and roughness. These data indicated that recleaned and resterilized Ti implant surfaces cannot be considered the same as the first surfaces in terms of surface properties and cell responses. Therefore, the reuse of Ti implants after resterilization may not result in the same tissue responses as found with never-before-implanted specimens.

Relative influence of surface topography and surface chemistry on cell response to bone implant materials. Part 1: physico-chemical effects

Knowledge of the complexity of cell-material interactions is essential for the future of biomaterials and tissue engineering, but we are still far from achieving a clear understanding, as illustrated in this review. Many factors of the cellular or the material aspect influence these interactions and must be controlled systematically during experiments. On the material side, it is essential to illustrate surface topography by parameters describing the roughness amplitude as well as the roughness organization, and at the scales pertinent for the cell response, i.e., from the nano-scale to the micro-scale. Authors interested in this field must be careful to develop surfaces or methods systematically, allowing perfect control of the relative influences of surface topography and surface chemistry.

Stability of antibacterial self-assembled monolayers on hydroxyapatite

Open fractures are common in battlefields, motor vehicle accidents, gunshot wounds, sports injuries, and high-energy falls. Such fractures are treated using hydroxyapatite (HA)-based bone graft substitutes. However, open fracture wounds are highly susceptible to bacterial infections. Hence, this study was focused on incorporating antibacterial properties to HA using silver (Ag) carrying self-assembled monolayers (SAMs). Also, the stability of Ag carrying SAMs on HA was investigated under sterilization and physiological conditions. Initially, the -COOH terminated phosphonic acid SAMs of two different chain lengths (11 carbon atoms - shorter chain and 16 carbon atoms - longer chain) were deposited on HA. Antibacterial SAMs (ASAMs) were prepared by chemically attaching Ag to shorter and longer chain SAMs coated HA. X-ray photoelectron spectroscopy, atomic force microscopy, and contact angle goniometry collectively confirmed the attachment of Ag onto SAMs coated HA. The bacterial adhesion study showed that the adherence of Staphylococcus aureus was significantly reduced on ASAMs coated HA when compared to control-HA. The stability studies showed that gas plasma, dry heat and autoclave degraded most of the ASAMs on HA. UV irradiation did not damage the shorter chain ASAMs as vigorously as other treatments, while it degraded the longer chain ASAMs completely. Ethylene oxide treatment did not degrade the longer chain ASAMs unlike all other treatments but it severely damaged the shorter chain ASAMs. Both shorter and longer chain ASAMs significantly desorbed from the HA surfaces under physiological conditions although longer chain ASAMs exhibited better stability than shorter chain ASAMs. This study demonstrated the potential for using ASAMs to provide antibacterial properties to HA and the need for developing techniques to improve stability of SAMs under sterilization and physiological conditions.

Opposite responses of cells and bacteria to micro/nanopatterned surfaces prepared by pulsed plasma polymerization and UV-irradiation

Chemically and topographically patterned surfaces have high potential as model surfaces for studying cell and bacteria responses to surface chemistry and surface topography at a nanoscale level. In this work, we demonstrated the possibility to combine pulsed plasma polymerization and UV-irradiation to obtain topographical patterns and chemical patterns perfectly controlled at microlateral resolution and sub-micrometer depth level. Biological experiments were conducted using human osteoprogenitor cells and Escherichia coli K12. Proliferation and orientation of cells and bacteria were analyzed and discussed according to the size and the chemistry of the features. This work showed interesting opposite behavior of bacteria compared to eukaryotic cells, in response to the surface chemistry and to the surface topography. This result may be particularly useful on medical implants. From a methodological point of view, it highlighted the importance of working with versatile and well-characterized surfaces before and after sterilization. It also points out the relevance and the necessity of analyzing eukaryotic cell and bacteria adhesion in parallel way.

Quantitative and morphological analysis of biofilm formation on self-assembled monolayers

In spite of intensive studies over the past two decades, the influence of surface properties on bacterial adhesion and biofilm formation remains unclear, particularly on late steps. In order to contribute to the elucidation of this point, we compared the impact of two different substrates on the formation of bacterial biofilm, by analysing bacterial amount and biofilm structure on hydrophilic and hydrophobic surfaces. The surfaces were constituted by NH(2)- and CH(3)-terminated self-assembled monolayers (SAMs) on silicon wafers, allowing to consider only the surface chemistry influence because wafers low roughness. A strain of Escherichia coli K12, able to produce biofilm on abiotic surfaces, was grown with culture durations varying from 4h to 336 h on both types of substrates. The amount of adhered bacteria was determined after detachment by both photometry at 630 nm and direct counting under light microscope, while the spatial distribution of adhered bacteria was observed by fluorescence microscopy. A general view of our results suggests a little influence of the surface chemistry on adherent bacteria amount, but a clear impact on dynamics of biofilm growth as well as on biofilm structure. This work points out how surface chemistry of substrates can influence the bacterial adhesion and the biofilm formation.