Investigation into potential mechanisms promoting biocompatibility of polymeric biomaterials containing the phosphorylcholine moiety

Emerging Anti-Fouling Methods: Towards Reusability of 3D-Printed Devices for Biomedical Applications

Microfluidic devices are used in a myriad of biomedical applications such as cancer screening, drug testing, and point-of-care diagnostics. Three-dimensional (3D) printing offers a low-cost, rapid prototyping, efficient fabrication method, as compared to the costly-in terms of time, labor, and resources-traditional fabrication method of soft lithography of poly(dimethylsiloxane) (PDMS). Various 3D printing methods are applicable, including fused deposition modeling, stereolithography, and photopolymer inkjet printing. Additionally, several materials are available that have low-viscosity in their raw form and, after printing and curing, exhibit high material strength, optical transparency, and biocompatibility. These features make 3D-printed microfluidic chips ideal for biomedical applications. However, for developing devices capable of long-term use, fouling-by nonspecific protein absorption and bacterial adhesion due to the intrinsic hydrophobicity of most 3D-printed materials-presents a barrier to reusability. For this reason, there is a growing interest in anti-fouling methods and materials. Traditional and emerging approaches to anti-fouling are presented in regard to their applicability to microfluidic chips, with a particular interest in approaches compatible with 3D-printed chips.

Surface Active to Non-Surface Active Transition and Micellization Behaviour of Zwitterionic Amphiphilic Diblock Copolymers: Hydrophobicity and Salt Dependency

We have synthesized a range of zwitterionic amphiphilic diblock copolymers with the same hydrophilic block (carboxybetaine) but with different hydrophobic blocks (n-butylmethacrylate (n-BMA) or 2-ethylhexylacrylate (EHA)) by the reversible addition⁻fragmentation chain transfer (RAFT) polymerization method. Herein, we systematically examined the role of hydrophobicity and salt concentration dependency of surface activity and micellization behaviour of block copolymer. Transition from surface active to non-surface active occurred with increasing hydrophobicity of the hydrophobic block of block copolymer (i.e., replacing P(n-BMA) by PEHA). Foam formation of block copolymer slightly decreased with the similar variation of the hydrophobic block of block copolymer. Block copolymer with higher hydrophobicity preferred micelle formation rather than adsorption at the air⁻water interface. Dynamic light scattering studies showed that block copolymer having P(n-BMA) produced near-monodisperse micelles, whereas block copolymer composed of PEHA produced polydisperse micelles. Zimm plot results revealed that the value of the second virial coefficient (A₂) changed from positive to negative when the hydrophobic block of block copolymer was changed from P(n-BMA) to PEHA. This indicates that the solubility of block copolymer having P(n-BMA) in water may be higher than that of block copolymer having PEHA in water. Unlike ionic amphiphilic block copolymer micelles, the micellar shape of zwitterionic amphiphilic block copolymer micelles is not affected by addition of salt, with a value of packing parameters of block copolymer micelles of less than 0.3.

Anti-fouling Coatings of Poly(dimethylsiloxane) Devices for Biological and Biomedical Applications

Fouling initiated by nonspecific protein adsorption is a great challenge in biomedical applications, including biosensors, bioanalytical devices, and implants. Poly(dimethylsiloxane) (PDMS), a popular material with many attractive properties for device fabrication in the biomedical field, suffers serious fouling problems from protein adsorption due to its hydrophobic nature, which limits the practical use of PDMS-based devices. Effort has been made to develop biocompatible materials for anti-fouling coatings of PDMS. In this review, typical nonfouling materials for PDMS coatings are introduced and the associated basic anti-fouling mechanisms, including the steric repulsion mechanism and the hydration layer mechanism, are described. Understanding the relationships between the characteristics of coating materials and the accompanying anti-fouling mechanisms is critical for preparing PDMS coatings with desirable anti-fouling properties.

Photoresponsive block copolymer: synthesis, characterization, and surface activity control

Amphiphilic block copolymers bearing chromophores are used to achieve photoresponses upon exposure to suitable light, which alter molecular properties, but the photostimulus surface activity control of amphiphilic block copolymers remains to be elucidated. In this work, a series of novel amphiphilic block copolymers consisting of a carboxymethyl betaine monomer (called GLBT) and 4-ethoxy-4'-methacrylamide (EMAAB) with different block ratios have been synthesized using a reversible addition-fragmentation chain-transfer (RAFT) polymerization process. Copolymers were observed to be self-assembled in the aqueous solution above a critical micelle concentration, which was determined by static light scattering measurements and formed vesicles of 120-170 nm in diameter, at different pH values. Copolymers were found to be surface-active at pH 7 but exhibited non-surface activity at acidic and alkaline pH values. After being irradiated with 360 nm UV light, copolymers showed a significant photoresponse both at the surface and in bulk solution as a result of the photoinduced isomerization of azochromophores. The surface property of copolymers was significantly affected by UV irradiation at pH 7, and block copolymers became non-surface-active. The bulk properties changed considerably upon UV exposure where polymer vesicles transformed to micelles as a result of the polarity difference between two azo isomers (cis and trans isomers). All of these transitions were found to be reversible. A new method to control the surface active/nonactive and vesicle/micelle transitions by light and pH has been established by introducing an azobenzene chromophore and GLBT into amphiphlic diblock copolymers.

Carboxylate modified porous graphitic carbon: a new class of hydrophilic interaction liquid chromatography phases

Stationary phases for hydrophilic interaction liquid chromatography (HILIC) are predominantly based on silica and polymer supports. We present porous graphitic carbon particles with covalently attached carboxylic acid groups (carboxylate-PGC) as a new HILIC stationary phase. PGC particles were modified by adsorbing the diazonium salt of 4-aminobenzoic acid onto the PGC, followed by reduction of the adsorbed salt with sodium borohydride. The newly developed carboxylate-PGC phase exhibits different selectivity than that of 35 HPLC columns, including bare silica, zwitterionic, amine, reversed, and unmodified PGC phases. Carboxylate-PGC is stable from pH 2.0 to 12.6, yielding reproducible retention even at pH 12.6. Characterization of the new phase is presented by X-ray photoelectron spectroscopy, thermogravimetry, zeta potentials, and elemental analysis. The chromatographic performance of carboxylate-PGC as a HILIC phase is illustrated by separations of carboxylic acids, nucleotides, phenols, and amino acids.

Nonfouling hydrogels formed from charged monomer subunits

A critical challenge in the field of biomaterials is the often undesirable, but immediate, coating of implants with nonspecifically adsorbed proteins upon contact with bodily fluids. Prior research has shown that overall neutral materials containing a homologous arrangement of mixed charges exhibit nonfouling properties. This has been widely demonstrated for zwitterionic materials and more recently for coatings containing an equimolar mixture of positively and negatively charged monomer subunits. In this investigation it is demonstrated that nonfouling hydrogels can be formed through this approach, and the physical properties of the resulting materials are thoroughly characterized. In particular, hydrogels were formed from mixtures of [2-(methacryloyloxy)ethyl]trimethylammonium chloride (TM) and 3-sulfopropyl methacrylate potassium salt (SA) monomers with varying concentrations of a triethylene glycol dimethacrylate (TEGDMA) cross-linker. The swelling, weight percentage water, surface zeta potential, and compressional properties of the gels were characterized, and the nonfouling properties were demonstrated using enzyme-linked immunosorbant assays for both negatively charged fibrinogen and positively charged lysozyme. The results confirm that the TM:SA hydrogel systems have nonfouling properties that are equivalent to established nonfouling controls. Additionally, even though the gels were resistant to nonspecific protein adsorption, a composition analysis suggests that there is room to further improve the nonfouling performance because there is a slight enrichment of the SA monomer relative to the TM monomer.

Hydrogels for tissue engineering and delivery of tissue-inducing substances

This manuscript presents hydrogels (HGs) from a tissue engineering perspective being especially written for those who are approaching this field by offering a concise but inclusive review of hydrogel synthesis, properties, characterization methods, and applications.

Quantity and Conformation of Lysozyme Deposited on Conventional and Silicone Hydrogel Contact Lens Materials Using an In Vitro Model

PURPOSE

To determine the activity of hen egg lysozyme (HEL) deposited on conventional and silicone hydrogel contact lens materials by using an in vitro model.

METHODS

ACUVUE 2 (etafilcon A), PureVision (balafilcon A), ACUVUE Advance (galyfilcon A), Focus NIGHT & DAY (lotrafilcon A), O2 Optix (lotrafilcon B), Proclear (omafilcon A), and ACUVUE OASYS (senofilcon A) contact lenses were deposited in vitro in a phosphate-buffered solution (PBS) containing 2 mg/mL HEL. Lenses were briefly rinsed in PBS to remove unbound material and extracted in a mixture of acetonitrile and trifluoroacetic acid. After lyophilization, extracts were examined for lysozyme activity by micrococcal assay and total protein by Western blot.

RESULTS

In terms of total protein accumulation, ACUVUE 2 showed the most, with 1,800 microg per lens. Proclear was next, with 68 microg per lens, and Focus NIGHT & DAY showed the least, with 2 microg per lens. ACUVUE Advance, ACUVUE OASYS, and O2 Optix accumulated similar amounts of lysozyme, at approximately 6 microg per lens. Lysozyme deposited on ACUVUE 2 showed the greatest activity (91% +/- 5%), and this result was statistically different from all other lens types (P<0.001). Lysozyme deposited on Focus NIGHT & DAY (24% +/- 5%) and O2 Optix (23% +/- 11%) showed the lowest activity. Lysozyme deposits on other lens materials showed intermediate activity (ACUVUE Advance, 60% +/- 15%; ACUVUE OASYS, 51% +/- 9%; PureVision, 58% +/- 8%; and Proclear, 38% +/- 3%).

CONCLUSIONS

Silicone hydrogel lenses acquire less lysozyme deposit than conventional group II (Proclear) or group IV (ACUVUE 2) lenses do, and the levels of activity of the lysozyme are highly variable between materials.

Surface modification on microfluidic devices with 2-methacryloyloxyethyl phosphorylcholine polymers for reducing unfavorable protein adsorption

Surface modification of polymer materials for preparing microfluidic devices including poly(dimethyl siloxane) (PDMS) was investigated with phospholipids polymers such as poly(2-methacryloyloxylethyl phosphorylcholine(MPC)-co-n-butyl methacrylate) (PMB) and poly(MPC-co-2-ethylhexyl methacrylate-co-2-(N,N-dimethylamino)ethyl methacrylate) (PMED). The hydrophilicity of every surface on the polymer materials modified with these MPC polymers increased and the value of zeta-potential became close to zero. The protein adsorption on the polymer materials with and without the surface modification was evaluated using a protein mixture of human plasma fibrinogen and serum albumin. Amount of proteins adsorbed on these polymeric materials showed significant reduction by the surface modification with the MPC polymers compared to the uncoated surfaces ranging from 56 to 90%. Furthermore, we successfully prepared PDMS-based microchannel which was modified by simple coating with the PMB and PMED. The modified microchannel also revealed a significant reduction of adsorption of serum albumin. We conclude that the MPC polymers are useful for reducing unfavorable protein adsorption on microfluidic devices.

Zwitterionic stationary phase with covalently bonded phosphorylcholine type polymer grafts and its applicability to separation of peptides in the hydrophilic interaction liquid chromatography mode

A novel phosphorylcholine type zwitterionic stationary phase was synthesized by graft polymerization of 2-methacryloyloxyethyl phosphorylcholine onto the surface of porous silica particles. The resulting material possesses both negatively charged phosphoric acid and positively charged quaternary ammonium groups, which renders it a low net charge over a wide pH range. The composition of the surface grafts were determined by elemental analysis and solid state NMR, and the surface charge (zeta-potential) in different buffer solutions were measured using photon correlation spectroscopy. Separation of several peptides was investigated on packed columns in the hydrophilic interaction liquid chromatography (HILIC) separation mode. It was shown that small peptides can be separated based on hydrophilic interaction and ionic interaction between the stationary phase and analyte. The organic solvent composition, the pH and the salt concentration of the eluent have strong effects on the retention time. Compared to native silica before grafting, the newly synthesized zwitterionic material gave more stable retention times for basic peptides over pH range 3-7 due to elimination of the dissociation of silanol groups.

PC Technology™ as a platform for drug delivery: from combination to conjugation

Hydrogel polymers incorporating phosphorylcholine have found widespread use in the manufacture of medical devices with improved haemo- and biocompatibility. Examples include soft contact lenses or coatings for devices, such as coronary stents and extracorporeal circuits. The advent of drug-device combinations has prompted the application of PC Technology (Biocompatibles UK Ltd) as a bioinert drug delivery vehicle, particularly in the form of coatings, for targeted delivery from a device surface. The flexible polymer chemistry employed in the synthesis of these materials offers a range of molecular architectures that could find applicability in a wide variety of drug delivery applications, including micellar, vesicular and gel systems, and even drug conjugation.