Isolation of microbial DNA by newly designed magnetic particles

Isolation of DNA from Arthrospira platensis and whole blood using magnetic nanoparticles (Fe3O4@OA and Fe3O4@OA@SiO2)

Magnetic nanoparticles (MNPs) provide a fast, cost-effective, and organic-free method for DNA isolation. In this paper, we synthesized MNP coated with oleic acid (Fe3O4@OA) and silica nanoparticles (Fe3O4@OA@SiO2), characterized the properties of MNP using TEM, VSM, and FTIR, and investigated their efficiency in DNA isolation from cyanobacteria. The yield and quality of isolated DNA were evaluated and compared with those from animal blood and those obtained by the silica column or organic solvents. The results showed the successful preparations of Fe3O4@OA and Fe3O4@OA@SiO2 with superparamagnetic behaviors and a mean diameter of 7 nm and 106 nm, respectively. The FTIR spectra of Fe3O4@OA confirmed the bonding of OA to the surface of iron oxide, while those of Fe3O4@OA@SiO2 showed the exposed silanol groups. Although MNPs yielded a lower quantity of DNA compared with phenol/chloroform extraction, they showed the potential  protection of the integrity of DNA against  centrifugal and shear forces. Fe3O4@OA@SiO2 favored more nucleic acid absorption than Fe3O4@OA, producing a 1.2 and 1.6 times greater amount of DNA from Arthrospira platensis and animal blood respectively. The purity of DNA isolated from Arthrospira platensis was also higher than that of animal blood. These findings indicate a new and simple approach for the isolation of DNA from Arthrospira genus.

Graphical Abstract

Optically-controlled closable microvalves for polymeric centrifugal microfluidic devices

Microvalving is a pivotal component in many microfluidic lab-on-a-chip platforms and micro-total analysis systems (μTAS). Effective valving is essential for the integration of multiple unit operations, such as, liquid transport, mixing, aliquoting, metering, washing, and fractionation. The ideal microfluidic system integrates numerous, sequential unit operations, provides precise spaciotemporal reagent release and flow control, and is amenable to rapid, low-cost fabrication and prototyping. Centrifugal microfluidics is an attractive approach that minimizes the need for supporting peripheral hardware. However, many of the microfluidic valving methods described in the literature suffer from operational limitations and fail when high rotational frequencies or pressure heads are required early in the analytical process. Current approaches to valve closure add unnecessary complexity to the microfluidic architecture, require the incorporation of additional materials such as wax, and entail extra fabrication steps or processes. Herein we report the characterization and optimization of a laser-actuated, closable valve method for polymeric microfluidic devices that ameliorates these shortcomings. Under typical operational conditions (rcf ≤605 ×g) a success rate >99% was observed, i.e. successful valve closures remained leak free through 605 ×g. Implementation of the laser-actuated closable valving system is demonstrated on an automated, centrifugally driven dynamic solid phase extraction (dSPE) device. Compatibility of this laser-actuated valve closure approach with commercially available polymerase chain reaction (PCR) assays is established by the generation of full 18-plex STR profiles from DNA purified via on-disc dSPE. This novel approach promises to simplify microscale valving, improve functionality by increasing the number of integrated unit operations, and allow for the automation of progressively complex biochemical assays.

Magnetic particles for in vitro molecular diagnosis: From sample preparation to integration into microsystems

Colloidal magnetic particles (MPs) have been developed in association with molecular diagnosis for several decades. MPs have the great advantage of easy manipulation using a magnet. In nucleic acid detection, these particles can act as a capture support for rapid and simple biomolecule separation. The surfaces of MPs can be modified by coating with various polymer materials to provide functionalization for different applications. The use of MPs enhances the sensitivity and specificity of detection due to the specific activity on the surface of the particles. Practical applications of MPs demonstrate greater efficiency than conventional methods. Beyond traditional detection, MPs have been successfully adopted as a smart carrier in microfluidic and lab-on-a-chip biosensors. The versatility of MPs has enabled their integration into small single detection units. MPs-based biosensors can facilitate rapid and highly sensitive detection of very small amounts of a sample. In this review, the application of MPs to the detection of nucleic acids, from sample preparation to analytical readout systems, is described. State-of-the-art integrated microsystems containing microfluidic and lab-on-a-chip biosensors for the nucleic acid detection are also addressed.

Highly sensitive and rapid detection of Pseudomonas aeruginosa based on magnetic enrichment and magnetic separation

A method for highly sensitive and rapid detection of Pseudomonas aeruginosa, based on magnetic enrichment and magnetic separation, is described in this paper. The magnetic nanoparticles (MNPs) were applied to adsorb genome DNA after the sample was lysed. The DNA binding MNPs were directly subjected to polymerase chain reaction (PCR) to amplify gyrB specific sequence of Pseudomonas aeruginosa. The biotin labeled PCR products were detected by chemiluminescence when they were successively incubated with the probes-modified MNPs and alkaline phosphatase (ALP) labeled streptavidin (SA). Agarose gel electrophoresis analyses approved the method of in situ PCR to be highly reliable. The factors which could affect the chemiluminiscence were studied in detail. The results showed that the MNPs of 400 nm in diameter are beneficial to the detection. The sequence length and the binding site of the probe with a target sequence have obvious effects on the detection. The optimal concentration of the probes, hybridization temperature and hybridization time were 10 μM, 60 ºC and 60 mins, respectively. The method of in situ PCR based on MNPs can greatly improve the utilization rate of the DNA template ultimately enhancing the detection sensitivity. Experiment results proved that the primer and probe had high specificity, and Pseudomonas aeruginosa was successfully detected with detection limits as low as 10 cfu/mL by this method, while the detection of a single Pseudomonas aeruginosa can also be achieved.

The use of strong anion-exchange (SAX) magnetic particles for the extraction of therapeutic siRNA and their analysis by liquid chromatography/mass spectrometry

Traditional methods for extracting oligonucleotides from serum and other biological fluids are often time-consuming and require multiple steps. Magnetic particle based separation of oligonucleotides has gained importance recently due to the advantages of simplicity and high efficiency. Here we report the development and optimization of commercially available strong anion-exchange (SAX) magnetic beads for the extraction of siRNA from human serum. The beads allowed for rapid extraction of siRNA from human serum in 100-200 μL of liquid chromatography/mass spectrometry (LC/MS)-compatible buffer in less than 1 h for a 96-well plate with no further drying steps. Due to the strong cation-binding properties of oligonucleotides, volatile ammonium salts such as triethylammonium bicarbonate (TEAB), ammonium bicarbonate, and NH(4) Cl were used to elute the siRNA from the beads. For more hydrophobic siRNA sequences, the addition of 5-10% organic solvent was required for elution. The recovery of chemically modified siRNA from human serum was around 80% for two types of beads examined; however, the recovery for highly modified sequences differed greatly between the two types of beads. In addition to extracting highly modified oligonucleotides, the SAX beads were also able to extract liposomal formulated siRNAs from serum with no interference from the lipid formulation. The extraction of siRNA from human serum was linear over the tested range of 50 ng/mL to 10 µg/mL. Using this extraction methodology, we have created a workflow to monitor siRNA serum stability by LC/MS. Initial observations confirm that RNase A type degradation with strand cleavage on the 3' side of uridine or cytosine is the dominant cleavage pattern in serum. This finding has implications for the selection and modification of therapeutic siRNAs and demonstrates the utility of magnetic beads as a simple and rapid extraction technique for siRNA.

Preparation of anti-CD4 monoclonal antibody-conjugated magnetic poly(glycidyl methacrylate) particles and their application on CD4+ lymphocyte separation

Novel immunomagnetic particles have been prepared for separation of CD4(+) lymphocytes. The magnetic nanoparticles with a diameter of approximately 5-6 nm were first synthesized by co-precipitation from ferrous and ferric iron solutions and subsequently encapsulated with poly(glycidyl methacrylate) (PGMA) by precipitation polymerization. Monoclonal antibody specific to CD4 molecules expressed on CD4(+) lymphocytes was conjugated to the surface of magnetic PGMA particles through covalent bonding between epoxide functional groups on the particle surface and primary amine groups of the antibodies. The generated immunomagnetic particles have successfully separated CD4(+) lymphocytes from whole blood with over 95% purity. The results indicated that these particles can be employed for cell separation and provide a strong potential to be applied in various biomedical applications including diagnosis, and monitoring of human diseases.

Synthesis of surface-anchored DNA-polymer bioconjugates using reversible addition-fragmentation chain transfer polymerization

We report here an approach to grafting DNA-polymer bioconjugates on a planar solid support using reversible addition-fragmentation chain transfer (RAFT) polymerization. In particular, a trithiocarbonate compound as the RAFT chain transfer agent (CTA) is attached to the distal point of a surface-immobilized oligonucleotide. Initiation of RAFT polymerization leads to controlled growth of polymers atop DNA molecules on the surface. Growth kinetics of poly(monomethoxy-capped oligo(ethylene glycol) methacrylate) atop DNA molecules is investigated by monitoring the change of polymer film thickness as a function of reaction time. The reaction conditions, including the polymerization temperature, the initiator concentration, the CTA surface density, and the selection of monomers, are varied to examine their impacts on the grafting efficiency of DNA-polymer conjugates. Comparing to polymer growth atop small molecules, the experimental results suggest that DNA molecules significantly accelerate polymer growth, which is speculated as a result of the presence of highly charged DNA backbones and purine/pyrimidine moieties surrounding the reaction sites.

Extraction of PCR-ready DNA from Staphylococcus aureus bacteriophages using carboxyl functionalized magnetic nonporous microspheres

Magnetic microspheres P(HEMA-co-EDMA) were used for PCR-ready phage DNA isolation from lysogenic strains of Staphylococcus aureus, including two new clinical isolates. The conditions of phage particle lysis were optimized. The quality of eluted phage DNA was evaluated by PCR. It was demonstrated that PCR-ready phage DNA can be isolated from small volumes of phage lysates (150 microl) by magnetic microspheres. The reported method is very expeditious without using toxic compounds such as phenol or chloroform. It can be used for phage identification and phage gene detection.

Preparation and properties of magnetic nano- and microsized particles for biological and environmental separations

The paper presents a critical overview on magnetic nanoparticles and microspheres used as separation media in different fields of chemistry, biochemistry, biology, and environment protection. The preparation of most widely used magnetic iron oxides in appropriate form, their coating or encapsulation in polymer microspheres, and functionalization is discussed in the first part. In the second part, new developments in the main application areas of magnetic composite particles for separation and catalytical purposes are briefly described. They cover separations and isolations of toxic inorganic and organic ions, proteins, and other biopolymers, cells, and microorganisms. Only selected number of relevant papers could be included due to the restricted extent of the review.