Glyco-acrylate copolymers for bilayer tethering on benzophenone-modified substrates

Surface grafted agents with various molecular lengths and photochemically active benzophenone moieties

Homologues of benzophenone silane, a covalently graftable, photochemically active surface functionalizing agent, are investigated as surface functionalization agents for both small particles and planar substrates.

Screen-Printed Voltammetric Biosensors for the Determination of Copper in Wine

Certain heavy metals present in wine, including copper, can form insoluble salts and can induce additional casse, so their determination is important for its quality and stability. In this context, a new biosensor for quantification of copper ions with BSA protein (bovine serum albumin) and using SPE electrodes (screen-printed electrodes) is proposed. The objective of this research was to develop a miniaturized, portable, and low-cost alternative to classical methods. A potentiostat, which displays the response in the form of a cyclic voltammogram, was used in order to carry out this method. Values measured for the performance characteristics of the new biosensor revealed a good sensitivity (21.01 μA mM⁻¹cm⁻²), reproducibility (93.8%), and limit of detection (0.173 ppm), suggesting that it has a high degree of application in the analysis proposed by our research. The results obtained for wine samples were compared with the reference method, atomic absorption spectrometer (AAS), and it was indicated that the developed biosensor is efficient and can be used successfully in the analysis of copper in wine. For the 20 samples of red wine analyzed with AAS, the concentration range of copper was between 0.011 and 0.695 mg/L and with the developed biosensor it was between 0.037 and 0.658 mg/L. Similar results were obtained for the 20 samples of white wine, 0.121–0.765 mg/L (AAS) and 0.192–0.789 mg/L (developed biosensor), respectively.

Using light to covalently immobilize and pattern nanoparticles onto surfaces

There is considerable current interest in developing methods to integrate nanoparticles into optical, electronic, and biological systems due to their unique size-dependent properties and controllable shape. We report herein a versatile new approach for covalent immobilization of nanoparticles onto substrates modified with photoactive, phthalimide-functional, self-assembled monolayers. Upon illumination with UV radiation, the phthalimide group abstracts a hydrogen atom from a neighboring organic molecule, leading to radical-based photografting reactions. The approach is potentially "universal" since virtually any polymeric or organic-inorganic hybrid nanoparticle can be covalently immobilized in this fashion. Because grafting is confined to illuminated regions that undergo photoexcitation, masking provides a simple and direct method for nanoparticle patterning. To illustrate the technique, nanoparticles formed from diblock copolymers of poly(styrene-b-polyethylene oxide) and laden with Hostasol Red dye are photografted and patterned onto glass and silicon substrates modified with photoactive phthalimide-silane self-assembled monolayers. Atomic force microscopy and X-ray photoelectron spectroscopy are applied to characterize the grafted nanoparticle films while confocal fluorescence microscopy is used to image patterned nanoparticle deposition.

Preparation and characterization of glycoacrylate-based polymer-tethered lipid bilayers on benzophenone-modified substrates

Polymer-tethered lipid bilayers are promising models for biological membranes as they may provide a soft, lubricating environment with sufficient spacing between the substrate and bilayer for incorporating transmembrane proteins. We present such a system that uses a glycoacrylate-based telechelic lipopolymer in combination with a lipid analogue. Characterization of the mixed monolayers of lipopolymers and free lipids at the air-water interface is used to examine the molecular organization that dictates the final assembly properties. Isotherms indicate that the source of the dominating interactions, whether polymer interactions in the subphase or alkyl chain interactions, depends on both the tethering density and area per molecule. Moreover, a critical composition exists at which the alkyl chain interactions dominate the monolayer behavior regardless of the area per molecule. Isobaric creep and hysteresis experiments suggest that permanent states due to irreversible polymer-polymer interactions are not created as the monolayer is compressed. These data, combined with theoretical polymer predictions, are used to understand the organization of the monolayers at the air-water interface and, hence, the separation distance between the bottom of the bilayer and substrate in the water-swollen state of the final bilayer assembly. Atomic force microscopy is used to confirm that the measured separation distance of 11.2 nm is on the order of what would be predicted using a theoretical analysis for a representative 5 mol % lipopolymer-tethered bilayer. Next, the homogeneity of the final bilayer is probed at multiple scales. Fluorescence microscopy is used to demonstrate that homogeneous and continuous bilayers can be formed (within the optical resolution limit of 500 nm) with all polymer tethering densities used in this study. Atomic force microscopy studies demonstrate that homogeneity comparable to that of a solid-supported lipid bilayer can be achieved for a representative 5 mol % lipopolymer-tethered bilayer. Langmuir-Blodgett transfer conditions for depositing monolayers that can be used to create homogeneous, fluid bilayers are also discussed. Finally, the distal leaflet lateral mobility is measured using fluorescence recovery after photobleaching experiments and shown to be a function of the tethering density. A possible model for the mobility data is developed in which the tethered lipids in the proximal leaflet act as immobile lipid obstacles that couple to distal leaflet lipids.