Application and properties of butyl acrylate/pentaerythrite triacrylate copolymers and cellulose-based Granocel as carriers for trypsin immobilization

Insights on the role of blocking agent on the properties of the lipase from Thermomyces lanuginosus immobilized on heterofunctional support for hydroesterification reactions

Here, we report a study of the effect of the blocking agent on the properties of the lipase from Thermomyces lanuginosus (TLL) immobilized on a heterofunctional support (Purolite C18-ethylnediamina (EDA)- vinyl sulfone (VS)-TLL-blocking agent) in different reactions. The performance of the biocatalysts was compared to those immobilized on standard hydrophobic support (Purolite C18-TLL) and the commercial one (TLL-IM). The nature of the blocking agent (Cys, Gly and Asp) altered the enzyme features. TLL-IM always gave a comparatively worse performance, with its specificity for the oil being very different to the Purolite biocatalysts. Under optimized conditions, Purolite C18-TLL yielded 97 % of hydrolysis conversion after 4 h using a water/waste cooking soybean oil (WCSO) mass ratio of 4.3, biocatalyst load of 6.5 wt% and a temperature of 44.2 °C (without buffer or emulsification agent). In esterification reactions of the purified free fatty acids (FFAs) obtained from WCSO, the best TLL biocatalysts depended on the utilized alcohol: linear amyl alcohol was preferred by Purolite C18-TLL and Purolite C18-EDA-VS-TLL-Gly, while higher activity was achieved utilizing isoamyl alcohol as nucleophile by Purolite C18-EDA-VS-TLL-Cys, Purolite C18-EDA-VS-TLL-Asp and IM-TLL as catalysts. All the results indicate the influence of the blocking step on the final biocatalyst features.

A review on the immobilization of pepsin: A Lys-poor enzyme that is unstable at alkaline pH values

Pepsin is a protease used in many different applications, and in many instances, it is utilized in an immobilized form to prevent contamination of the reaction product. This enzyme has two peculiarities that make its immobilization complex. The first one is related to the poor presence of primary amino groups on its surface (just one Lys and the terminal amino group). The second one is its poor stability at alkaline pH values. Both features make the immobilization of this enzyme to be considered a complicated goal, as most of the immobilization protocols utilize primary amino groups for immobilization. This review presents some of the attempts to get immobilized pepsin biocatalyst and their applications. The high density of anionic groups (Asp and Glu) make the anion exchange of the enzyme simpler, but this makes many of the strategies utilized to immobilize the enzyme (e.g., amino-glutaraldehyde supports) more related to a mixed ion exchange/hydrophobic adsorption than to real covalent immobilization. Finally, we propose some possibilities that can permit not only the covalent immobilization of this enzyme, but also their stabilization via multipoint covalent attachment.

Zinc oxide nanoparticles-impregnated chitosan surfaces for covalent immobilization of trypsin: Stability & kinetic studies

Trypsin (Try, EC. 3.4.21.4) was effectively immobilized on the surface of glutaraldehyde(GA)-activated ZnO/Chitosan nanocomposite through covalent attachment via Schiff-base linkages. Size, structure, surface morphology, & percentage elemental composition of the prepared ZnO nanoparticles and chitosan-coated ZnO nanocomposite were studied by UV-Visible spectroscopy, Fourier-transform infrared spectroscopy (FTIR), X-Ray diffraction analysis (XRD), transmission electron microscopy (TEM), Scanning electron microscopy (SEM), and Energy-Dispersive X-Ray Microanalysis (EDAX) techniques. Optimal immobilization conditions (incubation time (16 h), enzyme concentration (1.8 mg/ml), and pH (7.8)) were investigated to obtain the maximum expressed activity of the immobilized trypsin. Immobilized & solubilized trypsin exhibited the optimum catalytic activity at pH 8.5, 60 °C, and pH 7.8, 45 °C respectively. Kinetic parameters (K_m, V_max) of immobilized (27.12 μM, 8.82 μM/min) & free trypsin (25.76 μM, 4.16 μM/min) were determined, indicating that efficiency of trypsin improves after immobilization. Immobilized trypsin preserved 67% of initial activity at 50 °C during 2 h of incubation & sustained nearly 50% of catalytic activity until the 9th repeated cycle of utilization. Moreover, immobilized trypsin retained 50% of enzymatic activity after 90 days of storage at 4 °C. Hence, the current findings suggest that ZnO/Chitosan-GA-Trypsin would be a promising biocatalyst for large-scale biotechnological applications.

Stabilization of enzymes via immobilization: Multipoint covalent attachment and other stabilization strategies

The use of enzymes in industrial processes requires the improvement of their features in many instances. Enzyme immobilization, a requirement to facilitate the recovery and reuse of these water-soluble catalysts, is one of the tools that researchers may utilize to improve many of their properties. This review is focused on how enzyme immobilization may improve enzyme stability. Starting from the stabilization effects that an enzyme may experience by the mere fact of being inside a solid particle, we detail other possibilities to stabilize enzymes: generation of favorable enzyme environments, prevention of enzyme subunit dissociation in multimeric enzymes, generation of more stable enzyme conformations, or enzyme rigidification via multipoint covalent attachment. In this last point, we will discuss the features of an "ideal" immobilization protocol to maximize the intensity of the enzyme-support interactions. The most interesting active groups in the support (glutaraldehyde, epoxide, glyoxyl and vinyl sulfone) will be also presented, discussing their main properties and uses. Some instances in which the number of enzyme-support bonds is not directly related to a higher stabilization will be also presented. Finally, the possibility of coupling site-directed mutagenesis or chemical modification to get a more intense multipoint covalent immobilization will be discussed.

Preparation of immobilized/stabilized biocatalysts of β-glucosidases from different sources: Importance of the support active groups and the immobilization protocol

β-Glucosidases from two different commercial preparations, Pectinex Ultra SP-L and Celluclast® 1.5L, were immobilized on divinylsulfone (DVS) supports at pH 5.0, 7.0, 9.0, and 10. In addition, the biocatalysts were also immobilized in agarose beads activated by glyoxyl, and epoxide as reagent groups. The best immobilization results were observed using higher pH values on DVS-agarose, and for Celluclast® 1.5L, good results were also obtained using the glyoxil-agarose immobilization. The biocatalyst obtained using Pectinex Ultra SP-L showed the highest thermal stability, at 65°C, and an operational stability of 67% of activity after 10 reuses cycles when immobilized on DVS-agarose immobilized at pH 10 and blocked with ethylenediamine. The β-glucosidase from Celluclast® 1.5L produced best results when immobilized on DVS-agarose immobilized at pH 9 and blocked with glycine, reaching 7.76-fold higher thermal stability compared to its free form and maintaining 76% of its activity after 10 successive cycles. The new biocatalysts obtained by these protocols showed reduction of glucose inhibition of enzymes, demonstrating the influence of immobilization protocols, pH, and blocking agent.

Vinyl sulfone-activated silica for efficient covalent immobilization of alkaline unstable enzymes: application to levansucrase for fructooligosaccharide synthesis

Vinyl sulfone-silica was efficient to covalently immobilize levansucrase at neutral pH. LEV-VS showed altered selectivity towards FOS and good operational stability.

Versatility of divinylsulfone supports permits the tuning of CALB properties during its immobilization

Properties of CALB has been modulated by immobilization on divinylsulfone (DVS) activated agarose beads under different conditions (pH 5–10).

Characterization of supports activated with divinyl sulfone as a tool to immobilize and stabilize enzymes via multipoint covalent attachment. Application to chymotrypsin

DVS supports are very suitable to stabilize enzymes via multipoint covalent attachment.