Conformational and adsorptive characteristics of albumin affect interfacial protein boundary lubrication: from experimental to molecular dynamics simulation approaches

Controlled Temporal Release of Serum Albumin Immobilized on Gold Nanoparticles

Proteins adsorbed to gold nanoparticles (AuNPs) form bioconjugates and are critical to many emerging technologies for drug delivery, diagnostics, therapies, and other biomedical applications. A thorough understanding of the interaction between the immobilized protein and AuNP is essential for the bioconjugate to perform as designed. Here, we explore a correlation between the number of solvent-accessible thiol groups on a protein and the protein desorption rate from the AuNP surface in the presence of a competing protein. The chemical modification of human serum albumin (HSA) was carried out to install additional free thiols using Traut's reagent and create a library of HSA analogues by tailoring the molar excess of the Traut's reagent. We pre-adsorbed HSA variants onto the AuNP surface, and the resulting bioconjugates were then exposed to IgG antibody, and protein exchange was monitored as a function of time. We found that the rate of HSA displacement from the AuNP correlated with the experimentally measured number of accessible free thiol groups. Additionally, bioconjugates were synthesized using thiolated analogues of bovine serum albumin (BSA) and suspended in serum as a model for a complex sample matrix. Similarly, desorption rates with serum proteins were modulated with solvent-accessible thiols on the immobilized protein. These results further highlight the key role of Au-S bonds in the formation of protein-AuNP conjugates and provide a pathway to systematically control the number of free thiols on a protein, enabling the controlled release of protein from the surface of AuNP.

Spontaneous desorption of protein from self-assembled monolayer (SAM)-coated gold nanoparticles induced by high temperature

The nonspecific binding of proteins with nanomaterials (NMs) is a dynamic reversible process including both protein adsorption and desorption parts, which is crucial for controlled release of protein drug loaded by nanocarriers. The nonspecific binding of proteins is susceptible to high temperature, whereas its underlying mechanism still remains elusive. Here, the binding behavior of human serum albumin (HSA) with an amino-terminated self-assembled monolayer (SAM)-coated gold (111) surface was investigated by using molecular dynamics (MD) simulations. HSA binds to the SAM surface through salt bridges at 300 K. As the temperature increases to 350 K, HSA maintains its native structure, while the salt bridges largely diminish owing to the considerable lateral diffusion of HSA on the SAM. Moreover, the interfacial water located between HSA and the SAM gets increased and prevents the reformation of the salt bridges of HSA with the SAM, which reduces the binding affinity of HSA. And HSA eventually desorbs from the SAM. The depiction of thermally induced spontaneous protein desorption enriches our understanding of reversible binding behavior of protein with NMs, and may provide new insights into the controlled release of protein drugs delivered by using nanocarriers under the regulation of high temperature.

Effect of albumin, urea, lysozyme and mucin on the triboactivity of Ti6Al4V/zirconia pair used in dental implants

The titanium implant/zirconia abutment interface can suffer failure upon mechanical and biological issues, ultimately leading to the loss of the artificial tooth. The study of the effect of the organic compounds present in saliva on the tribological behavior of these systems is of utmost importance to understand the failure mechanisms and better mimic the in vivo conditions. The aim of the present work is to evaluate the effect of the addition of albumin, urea, lysozyme and mucin to artificial saliva, on the triboactivity of Ti6Al4V/zirconia pair commonly used in dental implants and then, compare the results with those obtained with human saliva. The solutions' viscosity was measured and the adsorption of the different biomolecules to both Ti6Al4V and zirconia was accessed. Tribological tests were performed using Ti6Al4V balls sliding on zirconia plates inside of a corrosion cell. Friction and wear coefficients were determined, and the open circuit potential (OCP) was monitored during the tests. Also, the wear mechanisms were identified. The presence of mucin in the artificial lubricant led to the lowest wear coefficients. The main wear mechanism was abrasion, independently of the used lubricant. Adhesive wear was observed for the systems without mucin. Tribocorrosion activity and wear coefficient were lower in the presence of mucin. None of the studied artificial lubricants mimicked the effect of human saliva (HS) on the tribological behavior of the studied pair since this lubricant led to the lowest friction coefficient and highest corrosion activity.

In vitro comparison of wear characteristics of PyroCarbon and metal on bone: Shoulder hemiarthroplasty

BACKGROUND

There are concerns regarding glenoid erosion with metal shoulder hemiarthroplasty. PyroCarbon may offer an alternative because of favorable wear characteristics and preservation of the glenoid. The purpose of this study was to assess in vitro bone wear characteristics of PyroCarbon relative to cobalt chromium alloy hemiarthroplasty in a shoulder wear simulator.

METHODS

Wear of PyroCarbon and cobalt chromium prostheses articulating with bone were characterized by means of bone wear penetration rate, changes to surface roughness, and wear particle analysis.

RESULTS

PyroCarbon prostheses produced significantly less damage to bone and were less damaged by the bone than cobalt chromium prostheses. Cobalt chromium testing was halted at approximately 320,000 cycles because the bone was consumed. Wear testing of PyroCarbon specimens continued through five million cycles. Linearized bone penetration rate, bone volume loss rate, and surface roughness for cobalt chromium test specimens were 30 times greater than for PyroCarbon.

CONCLUSIONS

Results demonstrate significantly less damage to bone in simulated shoulder function testing for PyroCarbon hemiarthroplasty implants relative to conventional cobalt chromium implants. Our study supports use of PyroCarbon in humeral head hemiarthroplasty as a viable alternative to conventional metal hemiarthroplasty. Further investigation of PyroCarbon performance in clinical settings is warranted.

The characteristics of a preservative-free contact lens care solution on lysozyme adsorption and interfacial friction behavior

The population of soft contact lens wearers is increasing, thus the issues of feeling comfortable and contact lens-induced clinical symptoms are concerned. Both lysozyme deposition and mechanical friction among contact lens and the eye can induce discomfort and eye conditions. Therefore, we characterized our developed preservative-free contact lens care solution on lysozyme adsorption and lubrication. Two distinct lens materials were washed with the care solution after being soaked in lysozyme, as well as were rubbed against the glass in the presence of lysozyme and the care solution for measuring the friction coefficient. Our results demonstrated that the preservative-free contact lens care solution can be applied as a potential lubricant for a specific type of soft contact lenses.

Regression models to predict the behavior of the coefficient of friction of AISI 316L on UHMWPE under ISO 14243-3 conditions

Friction is the natural response of all tribosystems. In a total knee replacement (TKR) prosthetic device, its measurement is hindered by the complex geometry of its integrating parts and that of the testing simulation rig operating under the ISO 14243-3:2014 standard. To develop prediction models of the coefficient of friction (COF) between AISI 316L steel and ultra-high molecular weight polyethylene (UHMWPE) lubricated with fetal bovine serum dilutions, the arthrokinematics and loading conditions prescribed by the ISO 142433: 2014 standard were translated to a simpler geometrical setup, via Hertz contact theory. Tribological testing proceeded by loading a stainless steel AISI 316L ball against the surface of a UHMWPE disk, with the test fluid at 37 °C. The method has been applied to study the behavior of the COF during a whole walking cycle. On the other hand, the role of protein aggregation phenomena as a lubrication mechanism has been extensively studied in hip joint replacements but little explored for the operating conditions of a TKR. Lubricant testing fluids were prepared with fetal bovine serum (FBS) dilutions having protein mass concentrations of 5, 10, 20 and 36 g/L. The results were contrasted against deionized, sterilized water. The results indicate that even at protein concentration as low as 5 g/L, protein aggregation phenomena play an important role in the lubrication of the metal-on-polymer tribopair. The regression models of the COF developed herein are available for numerical simulations of the tribological behavior of the aforementioned tribosystem. In this case, surface stress rather than film thickness should be considered.

In situ measurements of thin films in bovine serum lubricated contacts using optical interferometry

The aim of this study is to consider the relevance of in situ measurements of bovine serum film thickness in the optical test device that could be related to the function of the artificial hip joint. It is mainly focussed on the effect of the hydrophobicity or hydrophilicity of the transparent surface and the effect of its geometry. Film thickness measurements were performed using ball-on-disc and lens-on-disc configurations of optical test device as a function of time. Chromatic interferograms were recorded with a high-speed complementary metal-oxide semiconductor digital camera and evaluated with thin film colorimetric interferometry. It was clarified that a chromium layer covering the glass disc has a hydrophobic behaviour which supports the adsorption of proteins contained in the bovine serum solution, thereby a thicker lubricating film is formed. On the contrary, the protein film formation was not observed when the disc was covered with a silica layer having a hydrophilic behaviour. In this case, a very thin lubricating film was formed only due to the hydrodynamic effect. Metal and ceramic balls have no substantial effect on lubricant film formation although their contact surfaces have relatively different wettability. It was confirmed that conformity of contacting surfaces and kinematic conditions has fundamental effect on bovine serum film formation. In the ball-on-disc configuration, the lubricant film is formed predominantly due to protein aggregations, which pass through the contact zone and increase the film thickness. In the more conformal ball-on-lens configuration, the lubricant film is formed predominantly due to hydrodynamic effect, thereby the film thickness is kept constant during measurement.

Calf serum constituent fractions influence polyethylene wear and microbial growth in knee simulator testing

Calf serum lubricants consisting of various polypeptide constituent fractions are routinely used in knee wear simulators as part of the standardized test protocol. Three calf sera (bovine, new-born and alpha) were diluted as per the recommendation of ISO 14243-3 and used in displacement-controlled knee wear simulators to investigate their effects on polyethylene wear. Biochemical analyses included measuring total polypeptide degradation, electrophoretic profiles and low-molecular weight polypeptide concentrations to elucidate their involvement in the wear process. The effects of the various calf sera constituent fractions on microbial growth were also explored. The polyethylene wear rates and the results from the biochemical analyses for the three calf serum lubricants were all found to be statistically significantly different from each other. The lubricant derived from the alpha-calf serum was closest in constituent fractions to human synovial fluid. It also showed the lowest polyethylene wear rate (14.38 ± 0.85 mm3/million cycles) and the lowest amount of polypeptide degradation (7.77 ± 3.87%). Furthermore, the alpha-calf serum lubricant was associated with the least amount of change in the electrophoretic profile, the least change in low-molecular weight polypeptide concentration, and the lowest microbial growth in the presence of sodium azide (a microbial inhibitor conventionally used in implant wear testing). Replacing sodium azide with a broad spectrum antibiotic-antimycotic eradicated the microbial growth. Some speculation was entertained regarding the effect of alpha-calf serum on colloid-mediated boundary lubrication. Based on the results, it was recommended that ISO 14243-3 be modified to include guidelines on calf serum constituent fractions that would favour using alpha-calf serum in order to improve the fidelity of the simulation in knee implant wear testing.

Biomimetic hydration lubrication with various polyelectrolyte layers on cross-linked polyethylene orthopedic bearing materials

Natural joints rely on fluid thin-film lubrication by the hydrated polyelectrolyte layer of cartilage. However, current artificial joints with polyethylene (PE) surfaces have considerably less efficient lubrication and thus much greater wear, leading to osteolysis and aseptic loosening. This is considered a common factor limiting prosthetic longevity in total hip arthroplasty (THA). However, such wear could be mitigated by surface modification to mimic the role of cartilage. Here we report the development of nanometer-scale hydrophilic layers with varying charge (nonionic, cationic, anionic, or zwitterionic) on cross-linked PE (CLPE) surfaces, which could fully mimic the hydrophilicity and lubricity of the natural joint surface. We present evidence to support two lubrication mechanisms: the primary mechanism is due to the high level of hydration in the grafted layer, where water molecules act as very efficient lubricants; and the secondary mechanism is repulsion of protein molecules and positively charged inorganic ions by the grafted polyelectrolyte layer. Thus, such nanometer-scaled hydrophilic polymers or polyelectrolyte layers on the CLPE surface of acetabular cup bearings could confer high durability to THA prosthetics.

Inlet protein aggregation: a new mechanism for lubricating film formation with model synovial fluids

This paper reports a fundamental study of lubricant film formation with model synovial fluid components (proteins) and bovine serum (BS). The objective was to investigate the role of proteins in the lubrication process. Film thickness was measured by optical interferometry in a ball-on-disc device (mean speed range of 2-60 mm/s). A commercial cobalt-chromium (CoCrMo) metal femoral head was used as the stationary component. The results for BS showed complex time-dependent behaviour, which was not representative of a simple fluid. After a few minutes sliding BS formed a thin adherent film of 10-20 nm, which was attributed to protein absorbance at the surface. This layer was augmented by a hydrodynamic film, which often increased at slow speeds. At the end of the test deposited surface layers of 20-50 nm were measured. Imaging of the contact showed that at slow speeds an apparent 'phase boundary' formed in the inlet just in front of the Hertzian zone. This was associated with the formation of a reservoir of high-viscosity material that periodically moved through the contact forming a much thicker film. The study shows that proteins play an important role in the film-forming process and current lubrication models do not capture these mechanisms.

Adsorption of albumin and sodium hyaluronate on UHMWPE: a QCM-D and AFM study

The biotribological properties of artificial joints, in particular the efficiency of the lubrication, strongly determine their lifetime. The most commonly used artificial joints combine a metallic or ceramic part articulating against a ultra high molecular weight polyethylene (UHMWPE) counterface, and are lubricated by the periprosthetic fluid. This fluid contains several macromolecules, namely albumin and sodium hyaluronate (NaHA), that are known to be involved in the lubrication process. There are several studies in the literature concerning the interaction of the referred macromolecules with ceramic or metallic prosthetic materials. However, to our knowledge, information about their binding to the polymeric surface is practically inexistent. The objective of this work is to contribute to clarify the role played by albumin and NaHA on the biolubrication process, through the investigation of their interaction with the UHMWPE surface. The study involves adsorption measurements using a quartz crystal microbalance with dissipation (QCM-D), the characterization of the adsorbed films by atomic force microscopy (AFM) and wettability determinations. Albumin was found to adsorb strongly and extensively to the polymer, while NaHA led to a very low adsorption. In both cases rigid films were obtained, but with different morphology and porosity. The high binding affinity of the protein to the polymer was demonstrated both by the results of the fittings to Langmuir and Freundlich models and by the values of the adhesion forces determined by AFM. In the simultaneous adsorption of albumin and NaHA, protein adsorption is predominant and determines the surface properties.