Preparation and characterization of a polymeric (PLGA) nanoparticulate drug delivery system with simultaneous incorporation of chemotherapeutic and thermo-optical agents

Supramolecular antibody-drug conjugates for combined antibody therapy and photothermal therapy targeting HER2-positive cancers

Antibody therapy of anti-HER2 monoclonal antibody (mAb) has been an important strategy in treating HER2-positive cancers. However, the efficacy is restricted by many factors, including the level of HER2 expressed by tumor cells and antibody resistance. To overcome these and boost the efficacy, a novel nanoparticle (NP) was constructed in this study for combined antibody therapy of antibody and photothermal therapy (PTT). This novel NP was assembled from 1-pyrenecarboxylic acid (PCA) functionalized anti-HER2 mAb and indocyanine green (ICG), a photothermal transduction agents (PTA), by non-covalent interactions, which was named as Anti-HER2 mAb-pyrene-indocyanine green (H-P-I). Notably, the constructed H-P-I NP not only maintained the affinity and cytotoxicity of anti-HER2 mAb, but also exhibited high photothermal conversion efficiency mediated by ICG. Both in vitro and in vivo assessments confirmed that compared with monotherapy of antibody or ICG, H-P-I demonstrated preferable efficacy in treating HER2-positive cancers. Further biochemistry analysis and pathological analysis ensured the biosafety of H-P-I administration. Taked together, this study proposes a feasible method for constructing tumor-targeted nano PTA based on anti-HER2 mAb through supramolecular self-assembly strategy, achieving synergistic antibody photothermal anticancer treatment, which has the potential to be a promising candidate for combination therapy of HER2-positive cancers.

Optimizing lornoxicam-loaded poly(lactic-co-glycolic acid) and (polyethylene glycol) nanoparticles for transdermal delivery: ex vivo/in vivo inflammation evaluation

Aim: This study focused on developing a topical gel incorporating lornoxicam-loaded poly(lactic-co-glycolic acid) and polyethylene glycol (PLGA-PEG) blend nanoparticles to mitigate gastrointestinal (GIT) side effects and enhance therapeutic efficacy. Materials & methods: Synthesized nanoparticles were subjected to in vitro characterization, ex vivo permeation studies, and acute oral toxicity analysis post-incorporation into the gel using a S/O/W double emulsion solvent. Results & conclusion: The nanoparticles displayed a smooth, spherical morphology (170-321 nm) with increased entrapment efficiency (96.2%). LOX exhibited a permeation rate of 70-94% from the nanoparticle-infused gel, demonstrating favorable biocompatibility at the cellular level. The formulated gel, enriched with nanoparticles, holds promising prospects for drug-delivery systems and promising improved therapeutic outcomes for LOX.

Targeted delivery of rifaximin using P6.2-decorated bifunctional PLGA nanoparticles for combating Staphylococcus aureus infections

The emergence of antibiotic resistance makes the treatment of bacterial infections difficult and necessitates the development of alternative strategies. Targeted drug delivery systems are attracting great interest in overcoming the limitations of traditional antibiotics. Here, we aimed for targeted delivery of rifaximin (RFX) by decorating RFX-loaded poly(lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) with synthetic P6.2 peptide, which was used as a targeting agent for the first time. Our results showed that encapsulation of RFX into NPs increased its antibacterial activity by improving its solubility and providing controlled release, while P6.2 modification allowed targeting of NPs to S. aureus bacterial cells. A promising therapeutic approach for bacterial infections, these P6.2-conjugated RFX-loaded PLGA NPs (TR-NP) demonstrated potent antibacterial activity against both strains of S. aureus. The antibacterial activity of RFX-loaded PLGA NPs (R-NP) showed significant results with an increase of 8 and 16-fold compared to free RFX against S. aureus and MRSA, respectively. Moreover, the activity of targeted nanoparticles was found to be increased 32 or 16-fold with an MBC value of 0.0078 μg/mL. All nanoparticles were found to be biocompatible at doses where they showed antimicrobial activity. Finally, it revealed that P6.2-conjugated targeted nanoparticles extremely accumulated in S. aureus rather than E. coli.

Benznidazole-Loaded Polymeric Nanoparticles for Oral Chemotherapeutic Treatment of Chagas Disease

Chagas disease (CD) is a worldwide public health problem. Benznidazole (BZ) is the drug used to treat it. However, in its commercial formulation, it has significant side effects and is less effective in the chronic phase of the infection. The development of particulate systems containing BZ is therefore being promoted. The objective of this investigation was to develop polymeric nanoparticles loaded with BZ and examine their trypanocidal impact in vitro. Two formulas (BNP1 and BNP2) were produced through double emulsification and freeze drying. Subsequent to physicochemical and morphological assessment, both formulations exhibited adequate yield, average particle diameter, and zeta potential for oral administration. Cell viability was assessed in H9C2 and RAW 264.7 cells in vitro, revealing no cytotoxicity in cardiomyocytes or detrimental effects in macrophages at specific concentrations. BNP1 and BNP2 enhanced the effect of BZ within 48 h using a treatment of 3.90 μg/mL. The formulations notably improved NO reduction, particularly BNP2. The findings imply that the compositions are suitable for preclinical research, underscoring their potential as substitutes for treating CD. This study aids the quest for new BZ formulations, which are essential in light of the disregard for the treatment of CD and the unfavorable effects associated with its commercial product.

Polylactic Glycolic Acid-Mediated Delivery of Plectasin Derivative NZ2114 in Staphylococcus epidermidis Biofilms

Antimicrobial peptides (AMPs) are antibiotic candidates; however, their instability and protease susceptibility limit clinical applications. In this study, the polylactic acid-glycolic acid (PLGA)-polyvinyl alcohol (PVA) drug delivery system was screened by orthogonal design using the double emulsion-solvent evaporation method. NZ2114 nanoparticles (NZ2114-NPs) displayed favorable physicochemical properties with a particle size of 178.11 ± 5.23 nm, polydispersity index (PDI) of 0.108 ± 0.10, ζ potential of 4.78 ± 0.67 mV, actual drug-loading rate of 4.07 ± 0.37%, encapsulation rate of 81.46 ± 7.42% and cumulative release rate of 67.75% (120 h) in PBS. The results showed that PLGA encapsulation increased HaCaT cell viability by 20%, peptide retention in 50% serum by 24.12%, and trypsin tolerance by 4.24-fold. Meanwhile, in vitro antimicrobial assays showed that NZ2114-NPs had high inhibitory activity against Staphylococcus epidermidis (S. epidermidis) (4-8 μg/mL). Colony counting and confocal laser scanning microscopy (CLSM) confirmed that NZ2114-NPs were effective in reducing the biofilm thickness and bacterial population of S. epidermidis G4 with a 99% bactericidal rate of persister bacteria, which was significantly better than that of free NZ2114. In conclusion, the results demonstrated that PLGA nanoparticles can be used as a reliable NZ2114 delivery system for the treatment of biofilm infections caused by S. epidermidis.

Recent advancements in the targeted delivery of etoposide nanomedicine for cancer therapy: A comprehensive review

Etoposide (ETO), a popular anticancer drug that inhibits topoisomerase II enzymes, may be administered more effectively and efficiently due to nanomedicine. The therapeutic application of ETO is constrained by its limited solubility, weak absorption, and severe side effects. This article summarizes substantial progress made in the development of ETO nanomedicine for the treatment of cancer. It discusses various organic and inorganic nanostructures used to load or affix ETOs, such as lipids, liposomes, polymeric nanoparticles (NPs), dendrimers, micelles, gold NPs, iron oxide NPs, and silica NPs. In addition, it evaluates the structural properties of these nanostructures, such as their size, zeta potential, encapsulation efficiency, and drug release mechanism, as well as their in vitro or in vivo performance. The article also emphasizes the co-delivery of ETO with other medications or agents to produce synergistic effects or combat drug resistance in the treatment of cancer. It concludes with a discussion of the challenges and potential avenues for clinical translation of ETO nanomedicine.

Polymeric nanoparticles for enhanced delivery and improved bioactivity of essential oils

Essential oils are volatile constituents that give aromatic plants their characteristic odour. The application of these plant actives in food, agriculture, pharmaceutics, and cosmetics has been widely studied. Aromatherapy, a complementary therapy involving the use of essential oils to treat several diseases ranging from microbial infections to metabolic dysfunctions, has been utilised for centuries. Anticancer, antimicrobial, and anti-inflammatory activities are well-established among other pharmacological properties of these aromatic oils. The oils, which are composed mainly of terpene-based compounds, have also been explored as nutraceuticals, alternative green preservatives, and functional additives in foods. However, due to their physicochemical properties, viz high volatility and low aqueous solubility, essential oil delivery to target receptors were challenging when administered as chemotherapeutics. Hence, formulating essential oils with suitable excipients to enhance their delivery and bioavailability, invariably improving their bioactivity and therapeutic efficacy becomes expedient. Nanotechnology presents a unique strategy to develop a particulate delivery system for the controlled, sustained, and extended release of essential oils. In this review, we examine and summarize the trends and developments in the formulation of essential oils using polymeric nanoparticles.

GLUT-Targeting Phototherapeutic Nanoparticles for Synergistic Triple Combination Cancer Therapy

The combination of multimodal therapies into one nanocarrier system is promising for its potential to enhance treatment performance by overcoming the efficacy problems encountered in conventional monomodal therapy. In this study, targeted and multimodal therapeutic hybrid nanocarriers are fabricated for breast cancer treatments. In this context, the synthesized gold nanorods (AuNRd), photothermal therapy (PTT) agent, are coated with doxorubicin (DOX) conjugated, targeted, and biocompatible tetrablock glycopeptide (P(DMAEMA-b-HMBAMA-b-FrucMA)-b-P(Lys)/DOX, P-DOX) polymer. Here, fructose-based (Fruc) glycopeptide polymer enhances cellular uptake into breast cancer through GLUT5. A photosensitizer molecule, indocyanine green (ICG), was loaded into the particles to provide photodynamic therapy (PDT) upon NIR light at 808 nm. In the final step of the fabrication, the polymer-coated nanoparticles are integrated with antisense ISIS5132 oligonucleotides to prevent apoptotic resistance of cells against drug molecules. The biocompatibility and therapeutic efficacy of the nanoparticles are evaluated on both human normal skin fibroblast cell (CCD-1079Sk) and human breast cancer cell (MCF7) lines. These multimodal therapeutic AuNRd@P-DOX/ICG/ISIS5132 nanoparticles demonstrate an efficient triple synergistic effect of chemo-/PTT/PDT, which is desired for breast cancer treatment. We believe that this promising multimodal therapeutic nanoparticle system can promote the further clinical application in the treatment of breast cancer and can also be adapted to other types of cancer.

Chitosan Surface-Modified PLGA Nanoparticles Loaded with Cranberry Powder Extract as a Potential Oral Delivery Platform for Targeting Colon Cancer Cells

Nutraceutical cranberry powder extract (CBPE) has distinct polyphenols inhibiting colon cancer growth and proliferation. However, its oral therapeutic efficacy is hindered because of its low permeability. This study aims to formulate chitosan surface-modified PLGA nanoparticles (CS-PLGA NPs) for encapsulating CBPE and modulating its release rate, permeation, cell targeting, and, therefore, its cytotoxicity. A full 2³ factorial design is employed to scrutinize the effect of lactide/glycolide ratio, PLGA weight, and stabilizer concentrations on entrapment efficiency percentage (EE%), particle size (PS), polydispersity index (PDI), and zeta potential (ZP). The optimum formula (F4) shows spherical particles with a relatively high EE% (72.30 ± 2.86%), an appropriate size of 370.10 ± 10.31 nm, PDI; 0.398 ± 0.001, and ZP; -5.40 ± 0.21 mV. Alongside the ATR-FTIR outcomes, the chitosan surface-modified formula (CS-F4) demonstrates a significant increase in particle size (417.67 ± 6.77 nm) and a shift from negative to positive zeta potential (+21.63 ± 2.46 mV), confirming the efficiency of surface modification with chitosan. The intestinal permeability of F4 and CS-F4 is significantly increased by 2.19- and 3.10-fold, respectively, compared to the CBPE solution, with the permeability coefficient (P_app) being 2.05 × 10^-4 cm/min and 2.91 × 10^-4 cm/min, for F4 and CS-F4, respectively, compared to the CBPE solution, 9.36 × 10^-5 cm/min. Moreover, CS-F4 evidences significant caspase-3 protein level expression stimulation and significant inhibition of vascular endothelial growth factor (VEGF) and signal transducer and activator of transcription-3 (STAT-3) protein expression levels, confirming the superiority of CS-F4 for targeting HT-29 cells. Briefly, CS-PLGA NPs could be regarded as a prosperous delivery system of CBPE with enhanced permeation, cell targeting, and antitumor efficacy.

Effects of Process and Formulation Parameters on Submicron Polymeric Particles Produced by a Rapid Emulsion-Diffusion Method

Emulsification-diffusion method is often used to produce polymeric nanoparticles. However, their numerous and/or lengthy steps make it difficult to use widely. Thus, a modified method using solvent blends (miscible/partially miscible in water, 25–100%) as the organic phases to overcome these disadvantages and its design space were investigated. To further simplify the process, no organic/aqueous phase saturation and no water addition after the emulsification step were performed. Biodegradable (PLGA) or pH-sensitive (Eudragit^® E100) nanoparticles were robustly produced using low/medium shear stirring adding dropwise the organic phase into the aqueous phase or vice versa. Several behaviors were also obtained: lowering the partially water-miscible solvent ratio relative to the organic phase or the poloxamer-407 concentration; or increasing the organic phase polarity or the polyvinyl alcohol concentration produced smaller particle sizes/polydispersity. Nanoparticle zeta potential increased as the water-miscible solvent ratio increased. Poloxamer-407 showed better performance to decrease the particle size (~50 nm) at low concentrations (≤1%, w/v) compared with polyvinyl alcohol at 1–5% (w/v), but higher concentrations produced bigger particles/polydispersity (≥600 nm). Most important, an inverse linear correlation to predict the particle size by determining the solubility parameter was found. A rapid method to broadly prepare nanoparticles using straightforward equipment is provided.

Polylactide nanoparticles encapsulating indocyanine green for photothermal therapy of prostate cancer cells

BACKGROUND

The aim of this study is to investigate the in vitro phototherapeutic potential of indocyanine green (ICG) loaded polylactide (PLA) nanoparticles on prostate cancer cells. Many attempts at designing drug delivery systems against cancer were made that incorporates ICG as a photothermal, photodynamic or imaging agent. However, most of these systems contain at least one more drug, making it hard to assess the effects of ICG alone.

METHODS

Nanoparticles (ICGNP) were prepared via nanoprecipitation. The effects of phase volume ratio and ICG concentration on size, loading capacity and encapsulation efficiency were explored. Photothermal and photodynamic properties of ICGNP were examined. PC-3 cells were used for cell viability tests. Irradiation was achieved via custom built 809-nm computer controlled diode laser at 1 W/cm² (up to 600 J/cm²). Data were analyzed by ANOVA followed by Tukey's test (p ≤ 0.05).

RESULTS

ICGNP exhibited mean size of 300 nm with low polydispersity, and zeta potential of -14 mV. Upon laser irradiation, ICGNP were capable of causing temperature increase and producing singlet oxygen. On PC-3 cells, ICGNP were proved to be as effective as free ICG in inducing cell death. The measured temperature increase in culture medium and experiments with singlet oxygen quenchers suggest that the decrease in cell viability was mainly the result of photothermal action.

CONCLUSIONS

ICGNP was effective as a photothermal agent on PC-3 cells but further improvements are required to increase ICG loading capacity for it to be useful on a wide range of cell types.

Indocyanine Green-Loaded PLGA Nanoparticles Conjugated with Hyaluronic Acid Improve Target Specificity in Cervical Cancer Tumors

PURPOSE

Indocyanine green (ICG) is a promising agent for intraoperative visualization of tumor tissues and sentinel lymph nodes in early-stage gynecological cancer. However, it has some limitations, including a short half-life and poor solubility in aqueous solutions. This study aimed to enhance the efficacy of near-infrared (NIR) fluorescence imaging by overcoming the shortcomings of ICG using a nano-drug delivery system and improve target specificity in cervical cancer.

MATERIALS AND METHODS

ICG and poly(lactic-co-glycolic acid) (PLGA) conjugated with polyethylenimine (PEI) were assembled to enhance stability. Hyaluronic acid (HA) was coated on PEI-PLGA-ICG nanoparticles to target CD44-positive cancer cells. The manufactured HA-ICG-PLGA nanoparticles (HINPs) were evaluated in vitro and in vivo on cervical cancer cells (SiHa; CD44+) and human dermal cells (ccd986sk; CD44-), respectively, using NIR imaging to compare intracellular uptake and to quantify the fluorescence intensities of cells and tumors.

RESULTS

HINPs were confirmed to have a mean size of 200 nm and a zeta-potential of 33 mV using dynamic light scattering. The stability of the HINPs was confirmed at pH 5.0-8.0. Cytotoxicity assays, intracellular uptake assays, and cervical cancer xenograft models revealed that, compared to free ICG, the HINPs had significantly higher internalization by cervical cancer cells than normal cells (p<0.001) and significantly higher accumulation in tumors (p<0.001) via CD44 receptor-mediated endocytosis.

CONCLUSION

This study demonstrated the successful application of HINPs as nanocarriers for delivering ICG to CD44-positive cervical cancer, with improved efficacy in NIR fluorescence imaging.

Advances in Indocyanine Green-Based Codelivery Nanoplatforms for Combinatorial Therapy

Indocyanine green (ICG), a near-infrared (NIR) agent with an excellent imaging performance, has captivated enormous interest from researchers owing to its excellent therapeutic and imaging abilities. Although various nanoplatforms-based drug delivery systems (DDS) with the ability to overcome the clinical limitations of ICG has been reported, ICG-medicated conventional cancer diagnosis and photorelated therapies still lack in exhibiting the therapeutic efficacy, resulting in incomplete or partly tumor elimination. In the view of addressing these concerns, various DDSs have been engineered for the efficient codelivery of combined therapeutic agents with ICG, aiming to achieve promising therapeutic results due to multifunctional imaging-guided synergistic antitumor effects. In this article, we will systematically review currently available nanoplatforms based on polymers, inorganic, proteins, and metal-organic frameworks (MOFs), among others, for codelivery of ICG along with other therapeutic agents, providing a foundation for future clinical development of ICG. In addition, codelivery systems for ICG and different mechanism-based therapeutic agents will be illustrated. In summary, we conclude the review with the challenges and perspectives of ICG-based versatile nanoplatforms in detail.

Multifunctional nanobubbles carrying indocyanine green and paclitaxel for molecular imaging and the treatment of prostate cancer

BACKGROUND

Combining ultrasound imaging with photoacoustic imaging provides tissue imaging with high contrast and resolution, thereby enabling rapid, direct measurements and the tracking of tumour growth and metastasis. Moreover, ultrasound-targeted nanobubble destruction (UTND) provides an effective way to deliver drugs, effectively increasing the content of the drug in the tumour area and reducing potential side effects, thereby successfully contributing to the treatment of tumours.

RESULTS

In this study, we prepared multifunctional nanobubbles (NBs) carrying indocyanine green (ICG) and paclitaxel (PTX) (ICG-PTX NBs) and studied their applications in ultrasound imaging of prostate cancer as well as their therapeutic effects on prostate cancer when combined with UTND. ICG-PTX NBs were prepared by the mechanical oscillation method. The particle size and zeta potential of the ICG-PTX NBs were 469.5 ± 32.87 nm and - 21.70 ± 1.22 mV, respectively. The encapsulation efficiency and drug loading efficiency of ICG were 68% and 2.52%, respectively. In vitro imaging experiments showed that ICG-PTX NBs were highly amenable to multimodal imaging, including ultrasound, photoacoustic and fluorescence imaging, and the imaging effect was positively correlated with their concentration. The imaging effects of tumour xenografts also indicated that ICG-PTX NBs were of good use for multimodal imaging. In experiments testing the growth of PC-3 cells in vitro and tumour xenografts in vivo, the ICG-PTX NBs + US group showed more significant inhibition of cell proliferation and the promotion of cell apoptosis compared to the other groups (P < 0.05). Blood biochemical analysis of the six groups showed that the levels of aspartate aminotransferase (AST), phenylalanine aminotransferase (ALT), serum creatinine (CRE) and blood urea nitrogen (BUN) in the ICG-PTX NBs and the ICG-PTX NBs + US groups were significantly lower than those in the PTX group (P < 0.05). Moreover, H&E staining of tissue sections from vital organs showed no obvious abnormalities in the ICG-PTX NBs and the ICG-PTX NBs + US groups.

CONCLUSIONS

ICG-PTX NBs can be used as a non-invasive, pro-apoptotic contrast agent that can achieve multimodal imaging, including ultrasound, fluorescence and photoacoustic imaging, and can succeed in the local treatment of prostate cancer providing a potential novel method for integrated research on prostate cancer diagnosis and treatment.

Efficient Delivery of Triptolide Plus a miR-30-5p Inhibitor Through the Use of Near Infrared Laser Responsive or CADY Modified MSNs for Efficacy in Rheumatoid Arthritis Therapeutics

Rheumatoid arthritis (RA) is a chronic autoimmune inflammatory disease for which treatment focuses on suppressing an overactive immune system and maintaining the physiological balance of synovial fibroblasts (SFs). We found that miR-30-5p was highly expressed in rheumatoid arthritis synovial fibroblasts (RASFs). Subsequently, we predicted that phosphatidylinositol 3-kinase regulatory subunit 2 (PIK3R2) might be a putative target of miR-30-5p. Recent studies have reported that PIK3R2 can maintain the physiological homeostasis of RASFs. Therefore, miR-30-5p inhibitor has the potential to be used in the treatment of RA, but low levels of miR-30-5p inhibitor internalization affect its application. Triptolide (TP) is an effective drug in the treatment of RA but induces severe toxicity and has a narrow therapeutic window. In this study, the cell internalization performance of miR-30-5p inhibitor was improved by loading it into cell membrane penetrating peptide (CADY)-modified mesoporous silica nanoparticles (MSNs), and the toxicity of TP was decreased by loading it into a controlled drug release system based on MSNs. The nanodrug carrier was constructed by filling a phase-change material (PCM) of 1-tetradecanol and drugs into MSNs that could be triggered by an NIR laser with thermo-chemo combination RA therapy. Our results show that the miR-30-5p inhibitor-loaded MSNs@CADY significantly inhibited RASF proliferation and increased apoptosis. In addition, MSNs@PCM@TP under 808 nm laser irradiation were effective in downregulating immune system activation in an RA rat model. Finally, the results of a pharmacodynamics study showed that the combination of MSNs@CADY@miR-30-5p inhibitor and MSNs@PCM@TP under 808 nm laser significantly increased the effectiveness of RA treatment. These findings provide a novel understanding of RA pathogenesis and a theoretical basis for RA treatment.

Protease Responsive Essential Amino-Acid Based Nanocarriers for Near-Infrared Imaging

Delivery of the theranostic agents with effective concentration to the desired sites inside the body is a major challenge in disease management. Nanotechnology has gained attention for the delivery of theranostic agents to the targeted location. The use of essential amino-acid based homopolymers for the synthesis of biocompatible and biodegradable nanoparticles (NPs) could serve as a nanocarrier for delivery applications. In this study, poly-l-lysine (PLL) and salts were used to fabricate the NPs for the delivery of exogenous contrast agents. Here, indocyanine green (ICG) was encapsulated within these NPs, and a simple two-step green chemistry-based self-assembly process was used for the fabrication. The morphological and biochemical characterizations confirm the formation of ICG encapsulating spherical PLL NPs with an average diameter of ~225 nm. Further, a detailed study has been carried out to understand the role of constituents in the assembly mechanism of PLL NPs. Our results show a controlled release of the ICG from PLL NPs in the presence of the proteolytic enzyme. In-vitro cellular studies suggest that the PLL NPs were readily taken up by the cells showing their superior delivery efficiency of ICG in comparison to the free-form of the ICG.

Glyco-nanoparticles: New drug delivery systems in cancer therapy

Cancer is known as one of the most common diseases that are associated with high mobility and mortality in the world. Despite several efforts, current cancer treatment modalities often are highly toxic and lack efficacy and specificity. However, the application of nanotechnology has led to the development of effective nanosized drug delivery systems which are highly selective for tumors and allow a slow release of active anticancer agents. Different Nanoparticles (NPs) such as the silicon-based nano-materials, polymers, liposomes and metal NPs have been designed to deliver anti-cancer drugs to tumor sites. Among different drug delivery systems, carbohydrate-functionalized nanomaterials, specially based on their multi-valent binding capacities and desirable bio-compatibility, have attracted considerable attention as an excellent candidate for controlled release of therapeutic agents. In addition, these carbohydrate functionalized nano-carriers are more compatible with construction of the intracellular delivery platforms like the carbohydrate-modified metal NPs, quantum dots, and magnetic nano-materials. In this review, we discuss recent research in the field of multifunctional glycol-nanoparticles (GNPs) intended for cancer drug delivery applications.

Physical PEGylation Enhances The Cytotoxicity Of 5-Fluorouracil-Loaded PLGA And PCL Nanoparticles

Purpose

The main goal of this study is to evaluate the impact of physical incorporation of polyethylene glycol (PEG) into 5-fluorouracil (5-FU)-loaded polymeric nanoparticles (NPs).

Methods

The 5-FU-loaded NPs were prepared utilizing a simple double emulsion method using polycaprolactone (PCL) and polylactic-co-glycolic acid (PLGA) with or without PEG 6000. The surface charge, particle size, and shape of NPs were evaluated by standard procedures. Both Fourier Transform Infrared Spectroscopy and X-ray diffraction spectra of the 5-FU loaded NPs were compared against the pure 5-FU. The in vitro release profile of 5-FU from the NPs was monitored by the dialysis tubing method. Cell death and apoptosis induction in response to 5-FU NP exposure were measured by MTT and Annexin-V/7-amino-actinomycin D (7-AAD) assays, respectively, in Daoy, HepG2, and HT-29 cancer cell lines.

Results

The 5-FU loaded NPs were found to be spherical in shape with size ranging between 176±6.7 and 253.9±8.6 nm. The zeta potential varied between -7.13± 0.13 and -27.06±3.18 mV, and the entrapment efficiency was between 31.96% and 74.09%. The in vitro release of the drug followed a two-phase mode characterized by rapid release in the first 8 hrs followed by a period of slow release up to 72 hrs with composition-based variable extents. Cells exposed to NPs demonstrated a significant cell death which correlated with the ratio of PEG in the formulations in Daoy and HepG2 cells but not in HT-29 cells. Formulations (F1-F3) significantly induced early apoptosis in HT-29 cell lines.

Conclusion

The physical PEGylation significantly enhanced the entrapment and loading efficiencies of 5-FU into NPs formulated with PLGA and PCL. It also fostered the in vitro cytotoxicity of 5-FU-loaded NPs in both Daoy and HepG2 cells. Induction of early apoptosis was confirmed for some of the formulations.

Comparison and process optimization of PLGA, chitosan and silica nanoparticles for potential oral vaccine delivery

Aim: The study compared performance of nanoparticles prepared from synthetic organic, natural organic and inorganic materials as vaccine delivery platforms. Materials & methods: Various formulation (concentration, polymer/silica:surfactant ratio, solvent) and process parameters (homogenization speed and time, ultrasonication) affecting functional performance characteristics of poly(lactic-co-glycolic acid) (PLGA), chitosan and silica-based nanoparticles containing bovine serum albumin were investigated. Nanoparticles were characterized using dynamic light scattering, x-ray diffraction, scanning/transmission electron microscopy, Fourier transform infrared spectroscopy and in vitro protein release. Results: Critical formulation parameters were surfactant concentration (PLGA, silica) and polymer concentration (chitosan). Optimized nanoparticles were spherical in shape with narrow size distribution and size ranges of 100-300 nm (blank) and 150-400 nm (protein loaded). Protein encapsulation efficiency was 26-75% and released within 48 h in a sustained manner. Conclusion: Critical formulation and process parameters affected size of PLGA, chitosan and silica nanoparticles and protein encapsulation, while silica produced the smallest and most stable nanoparticles.

Polydatin Encapsulated Poly [Lactic-co-glycolic acid] Nanoformulation Counteract the 7,12-Dimethylbenz[a] Anthracene Mediated Experimental Carcinogenesis through the Inhibition of Cell Proliferation

In the present study, the authors have attempted to fabricate Polydatin encapsulated Poly [lactic-co-glycolic acid] (POL-PLGA-NPs) to counteract 7,12-dimethyl benzyl anthracene (DMBA) promoted buccal pouch carcinogenesis in experimental animals. The bio-formulated POL-PLGA-NPs were characterized by dynamic light scattering (DLS), Fourier transform infrared (FTIR) spectroscopy, X-ray powder diffraction (XRD) pattern analysis, and transmission electron microscope (TEM). In addition, the nano-chemopreventive potential of POL-PLGA-NPs was assessed by scrutinizing the neoplastic incidence and analyzing the status of lipid peroxidation, antioxidants, phase I, phase II detoxification status, and histopathological changes and in DMBA-treated animals. In golden Syrian hamsters, oral squamous cell carcinoma (OSCC) was generated by painting with 0.5% DMBA in liquid paraffin three times a week for 14 weeks. After 100% tumor formation was observed, high tumor volume, tumor burden, and altered levels of biochemical status were observed in the DMBA-painted hamsters. Intra-gastric administration of varying concentration of POL-PLGA-NPs (7.5, 15, and 30 mg/kg b.wt) to DMBA-treated hamsters assumedly prevents oncological incidences and restores the status of the biochemical markers. It also significantly enhances the apoptotic associated and inhibits the cancer cell proliferative markers expression (p53, Bax, Bcl-2, cleaved caspase 3, cyclin-D1). The present study reveals that POL-PLGA-NPs is a penitential candidate for nano-chemopreventive, anti-lipid peroxidative, and antioxidant potential, and also has a modulating effect on the phase I and Phase II detoxification system, which is associated with reduced cell proliferation and induced apoptosis in experimental oral carcinogenesis.

The effect of synthesis conditions and tunable hydrophilicity on the drug encapsulation capability of PLA and PLGA nanoparticles

Three drugs with different hydrophilicity are encapsulated in poly-lactide (PLA) and Poly(lactide-co-glycolide) (PLGA) drug delivery systems prepared by ring-opening polymerization (ROP). Formation of well-defined core-shell type nanoparticles (NPs) is observed for α-tocopherol (TP) and by systematically altering the hydrophilicity of the drug carrier NPs the entrapment efficiency (EE (%)) can be remarkably controlled. The highest (90%) of EE (%) is obtained for the most lipophilic TP from the applied three drugs in the 75% lactide-containing PLGA75 NPs, which is ca. 69% for PLA NPs. Subsequent to drug loading the detailed characterization of the polymers and the formed NPs was carried out. Precipitation titrations reveal that our PLGAs have narrower weight distribution than the commercially available polymer enabling favorable properties to obtain NPs with better size distribution. It is pointed out that during the synthesis the applied solvent and stabilizing agent play a decisive role in the size distribution and stability of the drug carrier NPs. The Pluronic F127-stabilized NPs have the smallest diameter (ca. 190 nm) with less polydispersity among the applied stabilizing agent in nanoprecipitation.

Harnessing platelets as functional vectors for contrast enhanced ultrasound imaging and fluorescence imaging

The recent progress in the development of highly biocompatible nanoplatforms mostly encompasses the use of biological excipients such as red blood cells, cancer cell membranes, and also platelets. Such specialized vectors, if mimicked correctly, have intrinsic ability to navigate through the biological system and perform their intended action without eliciting any cascade of inflammatory processes. Naturally, platelets have been found to accumulate in the wound sites and also interact with circulating tumor cells (CTCs). Inspired by the targeting ability of platelets and the clinical success of ultrasound, herein we developed a novel ultrasound contrast agent (UCA) by backfilling of an insoluble gas into the platelets after lyophilization ex vivo. The as-prepared platelet-based ultrasound contrast agent (P-UCA) disguised the structural integrity of the natural platelets with an average diameter of 3.1 ± 0.4 μm, and could enhance the ultrasound signal both in vitro and in vivo. Besides, we further evaluated that such platelet particles could facilitate active loading of ICG molecules for prolonged in vivo fluorescence imaging compared to the free ICG. Taking all the results together, we established that biological structures such as platelets could be repurposed ex vivo as a“shell” to encapsulate gas and be further extended to load ICG for real-time ultrasound and fluorescence imaging respectively. This not only indicates many potential uses of these MBs in the diagnosis of platelet-related diseases, such as vascular damage, thrombosis, and atherosclerosis, but also serves as a powerful platform with multimodal theranostic capability after active loading of a variety of therapeutic and diagnostic agents.

The recent progress in the development of highly biocompatible nanoplatforms mostly encompasses the use of biological excipients such as red blood cells, cancer cell membranes, and also platelets.

The effect of nanoencapsulation of ICG on two-photon bioimaging

Multiphoton imaging, a highly effective diagnostic technique, has recently gained widespread attention for early-stage cancer detection. Tremendous efforts have been dedicated to explore various types of exogenous contrast agents for improved signal-to-noise ratio of multiphoton imaging. Indocyanine green (ICG), the only U. S. FDA approved near-infrared chromophore, has been recently used as an exogenous contrast agent for two-photon bioimaging. Despite its great potential applications in clinical settings, the conventional delivery method of ICG has limited applications due to its poor cellular uptake and optical stability in its free form. Herein, we report the effect of nanoencapsulation of ICG on two-photon bioimaging. For this study, ICG was encapsulated within poly-l-arginine (PLA) based nanoparticles for the first time. These nanoparticles were found to be biocompatible and biodegradable as the major constituents were salts and PLA. These nanoparticles were spherical with a mean diameter of ∼61 nm and exhibit higher photostability than free ICG. Additionally, nanoencapsulated ICG treated cells show enhanced contrast for two-photon bioimaging in comparison with its free form. In summary, nanoencapsulated ICG could serve as an exogenous chromophore for multiphoton imaging, which shows excellent delivery efficacy.

ICG-PLA NPs were synthesized for multiphoton bioimaging. The ICG-PLA NPs were more efficiently taken up by the cells and improved the photostability of the ICG. The ICG-PLA NPs incubated cells display superior contrast in multiphoton imaging.

Gold nanorod-encapsulated biodegradable polymeric matrix for combined photothermal and chemo-cancer therapy

PURPOSE

A biocompatible nanocomplex system co-encapsulated with gold nanorods (AuNRs) and doxorubicin (DOX) was investigated for its potentials on the combined photothermal- and chemotherapy.

MATERIALS AND METHODS

Hydrophobic AuNRs were synthesized by the hexadecyltrimethyl-ammonium bromide (CTAB)-mediated seed growth method, and then, they received two-step surface modifications of polyethylene glycol (PEG) and dodecane. The AuNR/DOX/poly(lactic-co-glycolic acid) (PLGA) nanocomplexes were prepared by emulsifying DOX, AuNR, and PLGA into aqueous polyvinyl alcohol solution by sonication. Human serum albumin (HSA) was used to coat the nanocomplexes to afford HSA/AuNR/DOX-PLGA (HADP). Size and surface potential of the HADP nanocomplexes were determined by using a Zetasizer. Cytotoxicity and cellular uptake of the HADP were analyzed by using MTT assay and flow cytometry, respectively. In vitro anticancer effects of the HADP were studied on various cancer cell lines. To assess the therapeutic efficacy, CT26 tumor-bearing mice were intravenously administered with HADP nanocomplexes and laser treatments, followed by monitoring of the tumor growth and body weight.

RESULTS

Size and surface potential of the HADP nanocomplexes were 245.8 nm and -8.6 mV, respectively. Strong photothermal effects were verified on the AuNR-loaded PLGA nanoparticles (NPs) in vitro. Rapid and repeated drug release from the HADP nanocomplexes was successfully achieved by near-infrared (NIR) irradiations. HSA significantly promoted cellular uptake of the HADP nanocomplexes to murine colon cancer cells as demonstrated by cell imaging and flow cytometric studies. By combining photothermal and chemotherapy, the HADP nanocomplexes exhibited strong synergistic anticancer effects in vitro and in vivo.

CONCLUSION

An NIR-triggered drug release system by encapsulating hydrophobic AuNR and DOX inside the PLGA NPs has been successfully prepared in this study. The HADP NPs show promising combined photothermal- and chemotherapeutic effects without inducing undesired side effects on a murine colon cancer animal model.

Silk fibroin nanoparticles dyeing indocyanine green for imaging-guided photo-thermal therapy of glioblastoma

Silk was easily dyed in traditional textile industry because of its strong affinity to many colorants. Herein, the biocompatible silk fibroin was firstly extracted from Bombyx mori silkworm cocoons. And SF nanoparticles (SFNPs) were prepared for dyeing indocyanine green (ICG) and construct a therapeutic nano-platform (ICG-SFNPs) for photo-thermal therapy of glioblastoma. ICG was easily encapsulated into SFNPs with a very high encapsulation efficiency reaching to 97.7 ± 1.1%. ICG-SFNPs exhibited a spherical morphology with a mean particle size of 209.4 ± 1.4 nm and a negative zeta potential of −31.9 mV, exhibiting a good stability in physiological medium. Moreover, ICG-SFNPs showed a slow release profile of ICG in vitro, and only 24.51 ± 2.27% of the encapsulated ICG was released even at 72 h. Meanwhile, ICG-SFNPs exhibited a more stable photo-thermal effect than free ICG after exposure to near-infrared irradiation. The temperature of ICG-SFNPs rapidly increased by 33.9 °C within 10 min and maintained for a longer time. ICG-SFNPs were also easily internalized with C₆ tumor cells in vitro, and a strong red fluorescence of ICG was observed in cytoplasm for cellular imaging. In vivo imaging showed that ICG-SFNPs were effectively accumulated inside tumor site of C₆ glioma-bearing Xenograft nude mice through vein injection. Moreover, the temperature of tumor site was rapidly rising up to kill tumor cells after local NIR irradiation. After treatment, its growth was completely suppressed with the relative tumor volume of 0.55 ± 033 while free ICG of 33.72 ± 1.90. Overall, ICG-SFNPs may be an effective therapeutic means for intraoperative phototherapy and imaging.

Near infrared dye-labelled polymeric micro- and nanomaterials: in vivo imaging and evaluation of their local persistence

The use of micro- and nanomaterials as carriers of therapeutic molecules can enhance the efficiency of treatments while avoiding side effects thanks to the development of controlled drug delivery systems. The binding of a dye to a drug or to a drug carrier has opened up a wide range of possibilities for an effective in vivo optical tracing of drug biodistribution by using non-invasive real-time technologies prior to their potential use as therapeutic vectors. Here, we describe the fluorescent tagging of polymeric micro- and nanomaterials based on poly(lactic-co-glycolic) acid and on the thermoresponsive poly(N-isopropylacrylamide) with the fluorescent probe IR-820 which was chemically modified for its covalent coupling to the materials. The chemical modification of the dye and the polymers yielded micro- and nanoparticulated labelled materials to be potentially used as drug depots of different therapeutic molecules. In vitro biological studies revealed their reduced cytotoxicity. A spatiotemporal in vivo micro- and nanoparticle tracking allowed the evaluation of the biodistribution of materials showing their local persistence and high biocompatibility after pathological studies. These results underline the suitability of these materials for the local, sustained, not harmful and/or on-demand drug delivery and the remarkable importance of evaluating the biodistribution of materials and tissue persistence for their use as local drug depots.

RhBMP-2-loaded Poly(lactic-co-glycolic acid) microspheres fabricated by coaxial electrospraying for protein delivery

In this study, we fabricated recombinant human bone morphogenetic protein-2 (rhBMP-2) loaded Poly(lactic-co-glycolic acid) (PLGA) microspheres with core-shell structures and particle sizes ranging from 2.5 to 8 μm by coaxial electrospraying. The manufacturing process of core-shell microspheres by coaxial electrospraying is simpler than that with other methods, and a smaller diameter can be obtained. The microspheres were analyzed by environmental scanning electron microscopy, transmission electron microscopy (TEM), and laser scanning confocal microscopy (LSCM). Moreover, the drug release profiles and degradation of rhBMP-2-loaded PLGA microspheres in vitro were investigated for 21 days and for 7 weeks, respectively. The rhBMP-2 was stabilized by using bovine serum albumin (BSA) to ensure protein activity in the electrospraying process. Fluorescently labeled protein that was loaded into the core-shell PLGA microspheres was verified by LSCM. The distinct layered structure that existed in the manufactured core-shell microspheres can be observed by TEM. Cell Counting Kit-8 (CCK-8) indicated that the core-shell PLGA microspheres loaded with rhBMP-2 have great potential for the treatment of bone defects, for bone regeneration, and in bone tissue engineering.

PLGA Nanoparticles as Subconjunctival Injection for Management of Glaucoma

Nanoparticles fabricated from the biodegradable and biocompatible polymer, polylactic-co-glycolic acid (PLGA), could be a promising system for targeting ocular drug delivery. The objective of this work was to investigate the possibility of encapsulating brinzolamide in PLGA nanoparticles in order to be applied as a subconjunctival injection that could represent a starting point for developing new therapeutic strategies against increase in ocular pressure. The brinzolamide-loaded PLGA nanoparticles were fabricated using emulsion-diffusion-evaporation method with varying concentrations of Tween 80 or poloxamer 188 (Plx) in aqueous and organic phases. The nanoparticles were characterized in terms of particle size and size distribution, entrapment efficiency and in-vitro drug release pattern as well as DSC and X-ray analysis. Nanoparticles prepared using Tween 80 in the aqueous phase showed higher encapsulation efficiency and smaller particle size-values compared to those prepared using Plx. Furthermore, the addition of Plx 188 or Brij 97 to the organic phase in the formulation containing Tween 80 in the aqueous phase led to an increase in the particle diameter-values of the obtained nanoparticles. The nanoparticles had the capacity to release the brinzolamide in a biphasic release profile. The nanoparticles were spherical in shape and the drug was entraped in the nanoparticles in an amorphous form. Selected nanoparticles, injected subconjunctivally in normotensive Albino rabbits, were able to reduce the IOP for up to 10 days. Nanoparticles loaded with brinzolamide with lower particle size were able to reduce the IOP for longer period compared to those with higher particle size. Histopathological studies for the anterior cross sections of the rabbits' eyes revealed that the tested nanoparticles were compatible with the ocular tissue. The overall results support that PLGA nanoparticles, applied as subconjunctival injection, can be considered as a promising carrier for ocular brinzolamide delivery with targeting delivery of the drug to the eye tissues.

Di-Block PLCL and Tri-Block PLCLG Matrix Polymeric Nanoparticles Enhanced the Anticancer Activity of Loaded 5-Fluorouracil

In the current study, 5-FU-loaded nanoparticles (NPs) were prepared using polylactic-co-glycolic acid (PLGA), polycaprolactone (PCL), di-block poly lactide-co-caprolactone (PLCL) and tri-block poly L-lactide-co-caprolactone-co-glycolide (PLCLG). The influence of these polymers on the particle sizes, morphology, drug loading, and in vitro drug release was investigated. The anticancer activity was assessed utilizing MTT assay in three human cancer cell lines of different tissue origin; brain (Daoy), liver (HepG2), and colorectal (HT29) using suitable negative and positive controls. The prepared NPs showed a uniform spherical shape with an average size range of 193.5± 6.3 to 303.5± 3.3 nm with negative zeta potential. The entrapment efficiency achieved with F4-F6 (block copolymer NPs) was 78-79% and significantly higher compared with F1 PLGA (31%) and F2; PCL (37%). An initial rapid 5-FU release followed by a slow release ranging from 35% to 81% after 72 h was observed. All the prepared NPs formulations showed enhancement in the cytotoxicity of 5-FU towards all the three cancer cell lines. Generally, block copolymer NPs (F4-F6) showed higher % cell death over PLGA (F1) and PCL (F2) NPs after 48 and 72 h incubation in the case of HepG2 and HT-29. The incorporation of PEG with the tri-block (F6) caused a significant increase in the cytotoxicity of NPs in all of the three cancer cell lines. Block copolymer-based NPs can be considered as promising carriers for enhancing the efficacy of 5-FU in cancer therapy.

Polyethylene glycol modified ORMOSIL theranostic nanoparticles for triggered doxorubicin release and deep drug delivery into ovarian cancer spheroids

A novel pegylated multifunctional probe of Ormosil nanoparticles (PEGCDSIR820) loaded with Near Infrared dye (NIR; IR820) and a chemotherapeutic drug, Doxorubicin (DOX) was developed for cancer theranostic applications. PEGCDSIR820 nanoparticles had an average diameter of 58.2±3.1nm, zeta potential of -6.9±0.1mV in cell culture media and stability against aggregation in physiological buffers. The encapsulation efficiency of DOX was 65.0±3.0%, and that of IR820 was 76.0±2.1%. PEGCDSIR820 showed no cytotoxicity in ovarian cancer cells (Skov-3). The cytotoxicity markedly increased when Skov-3 cells incubated with PEGCDSIR820 particles were exposed to 808nm laser due to the combination of adjuvant hyperthermia (43°C) and enhanced DOX release. Exposure to laser enhanced the release of DOX, 45% of DOX release was observed in 3h compared to 23% without laser exposure. Confocal imaging in Skov-3 cells showed that the combination of hyperthermia due to NIR exposure and release of DOX caused cell necrosis. Furthermore, in spheroids exposed to NIR laser penetration of DOX was deeper compared to the absence of laser exposure. Skov-3 spheroids incubated with pegylated nanoparticles for 24h and exposed to laser showed 94% reduction in cell viability. Encapsulation of IR820 in PEGCDSIR820 increased the in-vivo elimination half-life to 41.0±7.2h from 30.5±0.5h of free IR820.

Polymeric nanoparticles: A study on the preparation variables and characterization methods

Since the emergence of Nanotechnology in the past decades, the development and design of nanomaterials has become an important field of research. An emerging component in this field is nanomedicine, wherein nanoscale materials are being developed for use as imaging agents or for drug delivery applications. Much work is currently focused in the preparation of well-defined nanomaterials in terms of size and shape. These factors play a significantly role in the nanomaterial behavior in vivo. In this context, this review focuses on the toolbox of available methods for the preparation of polymeric nanoparticles. We highlight some recent examples from the literature that demonstrate the influence of the preparation method on the physicochemical characteristics of the nanoparticles. Additionally, in the second part, the characterization methods for this type of nanoparticles are discussed.

Studying the effect of physically-adsorbed coating polymers on the cytotoxic activity of optimized bisdemethoxycurcumin loaded-PLGA nanoparticles

The aim of this work was to study the effect of different physically-adsorbed coating polymers on the cytotoxic activity of optimized bisdemethoxycurcumin (BDMC) loaded-PLGA nanoparticles. BDMC-loaded poly(DL-lactide-co-glycolide) (PLGA) nanoparticles were prepared adopting the nanoprecipitation technique according to a full factorial study design. The effects of three independent variables each at two levels, namely: the polymer type, polymer concentration, and poly vinyl alcohol concentration were studied. The particles were optimized regarding particle size and entrapment efficiency where sizes <200 nm and entrapment efficiencies reaching ∼98% were obtained. The particles were further characterized using x-ray diffraction, transmission electron microscopy, and in-vitro release studies. A selected formulation was subjected to physical coating using various coating moieties, namely: PEG 4000, Tween 80 and Pluronic F68, to impart a hydrophilic stealth character to the surface. The surface hydrophobicity was assessed using the Rose Bengal dye test where the hydrophilicity character followed the following order: Tween 80 > PEG 4000 > Pluronic F68. The particles coating rendered the particles suitable for cancer-targeting regarding particle size measurements, morphology, release kinetics, and stability studies. Moreover, cytotoxicity testing was performed using HepG-2 cells. Coated NPs showed the highest inhibition of malignant cells viability compared to the uncoated NPs and free BDMC where the IC₅₀ of Pluronic-F68 coated NPs was 0.54 ± 0.01 µg/mL. The augmented effect against malignant cells poses these particles as a successful cancer remedy. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1433-1445, 2017.

Oxygen and indocyanine green loaded phase-transition nanoparticle-mediated photo-sonodynamic cytotoxic effects on rheumatoid arthritis fibroblast-like synoviocytes

BACKGROUND

Photodynamic therapy and sonodynamic therapy are developing, minimally invasive, and site-specific modalities for cancer therapy. A combined strategy PSDT (photodynamic therapy followed by sonodynamic therapy) has been proposed in this study. Here, we aimed to develop novel biodegradable poly(DL-lactide-co-glycolic acid) phase-transition nanoparticles simultaneously loaded with oxygen and indocyanine green (OI-NPs) and to investigate the cytotoxic effects and the potential mechanisms of OI-NP-mediated PSDT on MH7A synoviocytes.

METHODS

The OI-NPs were prepared using a modified double emulsion method and the physicochemical properties were determined. The cellular uptake of OI-NPs was detected by confocal microscopy and flow cytometry. 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazoliumbromide assay, flow cytometry, and Hoechst 33342/propidium iodide double staining were used to determine the cytotoxic effect of OI-NP-mediated PSDT on MH7A cells. Fluorescence microscope and fluorescence microplate reader were used to detect reactive oxygen species (ROS) generation.

RESULTS

The OI-NPs were a stable and efficient carrier to deliver oxygen and indocyanine green, and enhanced cellular uptake was observed in MH7A cells with the nanoparticles. OI-NP-mediated PSDT caused more serious cell damage and more evident cell apoptosis, compared with other groups. Furthermore, increased generation of intracellular ROS was detected in MH7A cells treated with PSDT. Interestingly, the OI-NP-mediated PSDT-induced cell viability loss was effectively rescued by pretreatment with the ROS scavenger N-acetylcysteine.

CONCLUSION

Multifunctional OI-NPs were successfully developed and characterized for the combined delivery of oxygen and indocyanine green, and OI-NP-mediated PSDT would be a potential cytotoxic treatment for MH7A cells. This study may provide a novel strategy for the treatment of RA and develop a model of theranostic application through phase-transition nanoparticle-mediated PSDT in the future.

Indocyanine Green Loaded Reduced Graphene Oxide for In Vivo Photoacoustic/Fluorescence Dual-Modality Tumor Imaging

Multimodality imaging based on multifunctional nanocomposites holds great promise to fundamentally augment the capability of biomedical imaging. Specifically, photoacoustic and fluorescence dual-modality imaging is gaining much interest because of their non-invasiveness and the complementary nature of the two modalities in terms of imaging resolution, depth, sensitivity, and speed. Herein, using a green and facile method, we synthesize indocyanine green (ICG) loaded, polyethylene glycol (PEG)ylated, reduced nano-graphene oxide nanocomposite (rNGO-PEG/ICG) as a new type of fluorescence and photoacoustic dual-modality imaging contrast. The nanocomposite is shown to have minimal toxicity and excellent photoacoustic/fluorescence signals both in vitro and in vivo. Compared with free ICG, the nanocomposite is demonstrated to possess greater stability, longer blood circulation time, and superior passive tumor targeting capability. In vivo study shows that the circulation time of rNGO-PEG/ICG in the mouse body can sustain up to 6 h upon intravenous injection; while after 1 day, no obvious accumulation of rNGO-PEG/ICG is found in any major organs except the tumor regions. The demonstrated high fluorescence/photoacoustic dual contrasts, together with its low toxicity and excellent circulation life time, suggest that the synthesized rNGO-PEG/ICG can be a promising candidate for further translational studies on both the early diagnosis and image-guided therapy/surgery of cancer.

Cabazitaxel and indocyanine green co-delivery tumor-targeting nanoparticle for improved antitumor efficacy and minimized drug toxicity

Cabazitaxel (CBX) is an effective antineoplastic agent for the treatment of many kinds of cancers. However, the poor water solubility remains a serious deterrent to the utilization of CBX as a commercial drug. In this study, we designed a strategy that integrated CBX into albumin nanoparticles (ANs) formed with human serum albumin (HSA) to improve the water solubility and targeting ability. Meanwhile, we utilized a photothermal agent-indocyanine green (ICG), which could cooperate with CBX to enhance the antitumor effect. The obtained ANs containing ICG and CBX (AN-ICG-CBX) exhibited good mono-dispersity. In vitro cytotoxicity study showed the effectiveness of CBX and ICG, respectively, whereas AN-ICG-CBX with irradiation exhibited the most efficient antiproliferative ability (83.7%). In vivo safety evaluation studies demonstrated the safety of AN-ICG-CBX. Furthermore, the in vivo antitumor study indicated that the AN-ICG-CBX with irradiation achieved higher tumor inhibition rate (91.3%) compared with CBX-encapsulated AN (AN-CBX) (83.3%) or ICG-encapsulated AN (AN-ICG) plus irradiation (60.1%) in 4T1 tumor-bearing mice. To sum up, a safety and effective formulation AN-ICG-CBX was developed in this study and successfully reduced the drug toxicity, improved the targeting efficiency and enhanced the therapeutic effects, becoming a promising candidate for clinical application.

Multifunctional organically modified silica nanoparticles for chemotherapy, adjuvant hyperthermia and near infrared imaging

We report a novel system of organically modified silica nanoparticles (Ormosil) capable of near infrared fluorescence and chemotherapy with adjuvant hyperthermia for image guided cancer therapy. Ormosil nanoparticles were loaded with a chemotherapeutic, Doxorubicin (DOX) and cyanine dye, IR820. Ormosil particles had a mean diameter of 51.2±2.4 nanometers and surface charge of -40.5±0.8mV. DOX was loaded onto Ormosil particles via physical adsorption (FDSIR820) or covalent linkage (CDSIR820) to the silanol groups on the Ormosil surface. Both formulations retained DOX and IR820 over a period of 2 days in aqueous buffer, though CDSIR820 retained more DOX (93.2%) compared to FDSIR820 (77.0%) nanoparticles. Exposure to near infrared laser triggered DOX release from CDSIR820. Uptake of nanoparticles was determined by deconvolution microscopy in ovarian carcinoma cells (Skov-3). CDSIR820 localized in the cell lysosomes whereas cells incubated with FDSIR820 showed DOX fluorescence from the nucleus indicating leakage of DOX from the nanoparticle matrix. FDSIR820 nanoparticles showed severe toxicity in Skov-3 cells whereas CDSIR820 particles had the same cytotoxicity profile as bare (No DOX and IR820) Ormosil particles. Furthermore, exposure of CDSIR820 nanoparticles to Near Infrared laser at 808 nanometers resulted in generation of heat (to 43°C from 37°C) and resulted in enhanced cell killing compared to Free DOX treatment. Bio-distribution studies showed that CDSIR820 nanoparticles were primarily present in the organs of Reticuloendothelial (RES) system.

Near-infrared indocyanine dye permits real-time characterization of both venous and lymphatic circulation

We investigated the optical properties of a near-infrared (NIR) fluorochrome, di-β-cyclodextrin-binding indocyanine derivative (TK-1), and its pharmacokinetic differences with indocyanine green (ICG). TK-1 was designed to have hydrophilic cyclodextrin molecules and, thus, for higher water solubility and smaller particle sizes than the plasma protein-bound ICG. We compared optical properties such as the absorption and fluorescence spectra, quantum yield, and photostability between both dyes in vitro. In addition, we subcutaneously injected a 1 mM solution of TK-1 or ICG into the hind footpad of rats and observed real-time NIR fluorescence intensities in their femoral veins and accompanying lymphatics at the exposed groin site to analyze the dye pharmacokinetics. These optical experiments demonstrated that TK-1 has high water solubility, a low self-aggregation tendency, and high optical and chemical stabilities. Our in vivo imaging showed that TK-1 was transported via peripheral venous flow and lymphatic flow, whereas ICG was drained only through lymphatics. The results of this study showed that lymphatic and venous transport can be differentially regulated and is most likely influenced primarily by particle size, and that TK-1 can enable real-time NIR fluorescence imaging of whole fluids and solute movement via both microvessels and lymphatics, which conventional ICG cannot achieve.

Continuous synthesis of drug-loaded nanoparticles using microchannel emulsification and numerical modeling: effect of passive mixing

By using interdigital microfluidic reactors, monodisperse poly(d,l lactic-co-glycolic acid) nanoparticles (NPs) can be produced in a continuous manner and at a large scale (~10 g/h). An optimized synthesis protocol was obtained by selecting the appropriated passive mixer and fluid flow conditions to produce monodisperse NPs. A reduced NP polydispersity was obtained when using the microfluidic platform compared with the one obtained with NPs produced in a conventional discontinuous batch reactor. Cyclosporin, an immunosuppressant drug, was used as a model to validate the efficiency of the microfluidic platform to produce drug-loaded monodisperse poly(d,l lactic-co-glycolic acid) NPs. The influence of the mixer geometries and temperatures were analyzed, and the experimental results were corroborated by using computational fluid dynamic three-dimensional simulations. Flow patterns, mixing times, and mixing efficiencies were calculated, and the model supported with experimental results. The progress of mixing in the interdigital mixer was quantified by using the volume fractions of the organic and aqueous phases used during the emulsification-evaporation process. The developed model and methods were applied to determine the required time for achieving a complete mixing in each microreactor at different fluid flow conditions, temperatures, and mixing rates.

Indocyanine green delivery systems for tumour detection and treatments

Indocyanine green (ICG) is a cyanine compound that displays fluorescent properties in the near infrared region. This dye is employed for numerous indications but nowadays its major application field regards tumour diagnosis and treatments. Optical imaging by near infrared fluorescence provides news opportunities for oncologic surgery. The imaging of ICG can be useful for intraoperative identification of several solid tumours and metastases, and sentinel lymph node detection. In addition, ICG can be used as an agent for the destruction of malignant tissue, by virtue of the production of reactive oxygen species and/or induction of a hyperthermia effect under irradiation. Nevertheless, ICG shows several drawbacks, which limit its clinical application. Several formulative strategies have been studied to overcome these problems. The rationale of the development of ICG containing drug delivery systems is to enhance the in vivo stability and biodistribution profile of this dye, allowing tumour accumulation and resulting in better efficacy. In this review, ICG containing nano-sized carriers are classified based on their chemical composition and structure. In addition to nanosystems, different formulations including hydrogel, microsystems and others loaded with ICG will be illustrated. In particular, this report describes the preparation, in vitro characterization and in vivo application of ICG platforms for cancer imaging and treatment. The promising results of all systems confirm their clinical utility but further studies are required prior to evaluating the formulations in human trials.

Curcumin-Loaded PLA Nanoparticles: Formulation and Physical Evaluation

Curcumin is a polyphenolic compound derived from Curcuma domestica (Zingiberaceae) that possesses diverse pharmacological effects including anti-inflammatory, antioxidant, antimicrobial, and anticarcinogenic activities. Although phase I clinical trials have shown curcumin as a safe drug even at high doses (12 g/day) in humans, poor bioavaibility largely limits its pharmacological activity. Nanoencapsulation in biodegradable polymers is a promising alternative to improve curcumin bioavaibility. In this study, curcumin was encapsulated in biodegradable polymer poly-(lactic acid) (PLA) nanoparticles via the emulsification-solvent evaporation method. Optimization of selected parameters of this method including the type of solvent, surfactant concentration, drug loading, sonication time, and centrifugation speed, were performed to obtain polymeric nano-carriers with optimum characteristics. Dichloromethane was used as the solvent and vitamin E polyethylene glycol succinate (TPGS) was used as the surfactant. Four minutes of sonication time and centrifugation at 10500 rpm were able to produce spherical nanoparticles with average size below 300 nm. The highest encapsulation efficiency was found on PLA nanoparticles containing 5% of curcumin at 89.42 ± 1.04%. The particle size, polydispersity index, zeta potential of 5% curcumin-PLA nanoparticles were 387.50 ± 58.60 nm, 0.289 ± 0.047, and -1.12 mV, respectively. Differential Scanning Calorimetry (DSC) and X-Ray Diffraction (XRD) studies showed partial interaction between the drug and polymer.