Enhanced electrochemical detection of erythromycin based on acetylene black nanoparticles

Recent Advances in Conductive Polymers-Based Electrochemical Sensors for Biomedical and Environmental Applications

Electrochemical sensors play a pivotal role in various fields, such as biomedicine and environmental detection, due to their exceptional sensitivity, selectivity, stability, rapid response time, user-friendly operation, and ease of miniaturization and integration. In addition to the research conducted in the application field, significant focus is placed on the selection and optimization of electrode interface materials for electrochemical sensors. The detection performance of these sensors can be significantly enhanced by modifying the interface of either inorganic metal electrodes or printed electrodes. Among numerous available modification materials, conductive polymers (CPs) possess not only excellent conductivity exhibited by inorganic conductors but also unique three-dimensional structural characteristics inherent to polymers. This distinctive combination allows CPs to increase active sites during the detection process while providing channels for rapid ion transmission and facilitating efficient electron transfer during reaction processes. This review article primarily highlights recent research progress concerning CPs as an ideal choice for modifying electrochemical sensors owing to their remarkable features that make them well-suited for biomedical and environmental applications.

Low voltage electric-double-layer transistor nonenzymic erythromycin sensors based on molecularly imprinted polymers

Erythromycin (Ery) is a commonly used antibiotic that can be found ubiquitously in water bodies. The increasing apprehension over the adverse effects of antibiotic remnants in aquatic environments necessitates the prompt advancement of erythromycin detection techniques that are both highly sensitive and compact. Here, we propose a non-enzyme Ery sensor that integrates a mesoporous SiO2-based low-voltage oxide electric-double-layer transistor (EDLT) with a molecular imprinting technique, featuring a molecularly imprinted polymers (MIP) functionalized gate electrode. The mesoporous SiO2-based oxide transistor exhibits excellent electrical characteristics, including an operating voltage of small than 1.0 V, an on/off ratio exceeding 106 and a mobility of 14.95 cm2V-1s-1. At an ultra-low operating voltage within 0.5 V, the sensor exhibits a linear response to the concentration range of 1 nM-10 μM of Ery, with a detection limit of 0.22 nM and a sensitivity of 23.3 mV dec-1. Besides, the single-spike dynamic sensing mode effectively reduces the power consumption of the detection. The proposed sensor provides a rapid and convenient approach to detect Ery in aqueous environments, with benefits such as miniaturization, high sensitivity, and simplicity.

A novel AIE material for sensing of Erythromycin in pure water by hydrogen bond in portable test strips and cellular imaging applications

Erythromycin could be used to treat various bacterial infection, but it was harmful to the colonic microflora. Therefore, it is highly desirable to develop a fluorescence probe that could selectively and sensitively detect Erythromycin in pure water. In this work, a fluorescent probe named EHMC, which exhibited aggregation-induced emission (AIE) characteristic in solid state and water/EtOH binary solvent was developed for "turn on" sensing Erythromycin in pure water with high selectivity and sensitivity (detection limit: 1.78 × 10-8 M). Also, there are fewer interference from other antibiotics in the detection process of probe EHMC for Erythromycin. Moreover, probe EHMC could as a portable test strips for highly selective detection of Erythromycin and identification of different concentrations of Erythromycin. In addition, living cells imaging experiments displayed that probe EHMC could detect Erythromycin in A549 cells and BEAS-2B cells successfully. Combined with the theoretical calculation results The sensing mechanisms that the CO in Erythromycin and OH in EHMC formed intermolecular hydrogen bond and further formed new aggregates were confirmed by job' plot, 1H NMR, FT-IR, ESI-MS, DLS and TEM and DFT calculation.

Recent Developments and Implementations of Conductive Polymer-Based Flexible Devices in Sensing Applications

Flexible sensing devices have attracted significant attention for various applications, such as medical devices, environmental monitoring, and healthcare. Numerous materials have been used to fabricate flexible sensing devices and improve their sensing performance in terms of their electrical and mechanical properties. Among the studied materials, conductive polymers are promising candidates for next-generation flexible, stretchable, and wearable electronic devices because of their outstanding characteristics, such as flexibility, light weight, and non-toxicity. Understanding the interesting properties of conductive polymers and the solution-based deposition processes and patterning technologies used for conductive polymer device fabrication is necessary to develop appropriate and highly effective flexible sensors. The present review provides scientific evidence for promising strategies for fabricating conductive polymer-based flexible sensors. Specifically, the outstanding nature of the structures, conductivity, and synthesis methods of some of the main conductive polymers are discussed. Furthermore, conventional and innovative technologies for preparing conductive polymer thin films in flexible sensors are identified and evaluated, as are the potential applications of these sensors in environmental and human health monitoring.

Highly sensitive and selective erythromycin nanosensor employing fiber optic SPR/ERY imprinted nanostructure: Application in milk and honey

An erythromycin (ERY) detection method is proposed using the fiber optic core decorated with the coatings of silver and an over layer of ERY imprinted nanoparticles. Synthesis of ERY imprinted nanoparticles is carried out using miniemulsion method. The operating range of the sensor is observed to be from 1.62×10^-3 to 100µM while the sensor possesses the linear response for ERY concentration range from 0.1 to 5µM. The sensing method shows a maximum sensitivity of 205nm/µM near ERY concentration of 0.01µM. The detection limit and the quantification limit of the sensor are found to be 1.62×10^-3µM and 6.14×10^-3µM, respectively. The sensor's applicability in real samples is also examined and is found to be in good agreement for the industrial application. The sensor possesses numerous advantages like fast response time (<15s), simple, low cost, highly selective along with abilities towards online monitoring and remote sensing of analyte.

Fabrication of a Selective and Sensitive Sensor Based on Molecularly Imprinted Polymer/Acetylene Black for the Determination of Azithromycin in Pharmaceuticals and Biological Samples

A new selective and sensitive sensor based on molecularly imprinted polymer/acetylene black (MIP/AB) was developed for the determination of azithromycin (AZM) in pharmaceuticals and biological samples. The MIP of AZM was synthesized by precipitation polymerization. MIP and AB were then respectively introduced as selective and sensitive elements for the preparation of MIP/AB-modified carbon paste (MIP/ABP) electrode. The performance of the obtained sensor was estimated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques. Compared with non-molecularly imprinted polymer (NIP) electrodes, NIP/ABP electrodes, and MIP-modified carbon paste electrodes, MIP/ABP electrode exhibited excellent current response toward AZM. The prepared sensor also exhibited good selectivity for AZM in comparison with structurally similar compounds. The effect of electrode composition, extraction parameters, and electrolyte conditions on the current response of the sensor was investigated. Under the optimized conditions, the prepared sensor showed two dynamic linear ranges of 1.0 × 10⁻⁷ mol L⁻¹ to 2.0 × 10⁻⁶ mol L⁻¹ and 2.0 × 10⁻⁶ mol L⁻¹ to 2.0 × 10⁻⁵ mol L⁻¹, with a limit of detection of 1.1 × 10⁻⁸ mol L⁻¹. These predominant properties ensured that the sensor exhibits excellent reliability for detecting AZM in pharmaceuticals and biological fluids without the assistance of any separation techniques. The results were validated by the high-performance liquid chromatography–tandem mass spectrometry method.

A layered tungsten disulfide/acetylene black composite based DNA biosensing platform coupled with hybridization chain reaction for signal amplification

A 2-dimensional tungsten disulfide-acetylene black (WS₂-AB) composite is synthesized by a simple hydrothermal method to achieve excellent electrochemical properties for applications as a DNA biosensor. The biosensor is fabricated based on the Au nanoparticles (AuNPs) and WS₂-AB composite modified electrode, which subsequently is used to couple with a capture probe by an Au-S bond, then modified with target DNA, auxiliary DNA and bio-H1-bio-H2 (H1-H2) to perform hybridization chain reaction for signal amplification. Herein, two DNA hairpins H1 and H2 are opened by the recognition probe. The nicked double helices from hybridization chain reaction are used to immobilize horseradish peroxidase enzymes via biotin-avidin reaction, which produces signal-amplification detection of target DNA through the catalytic reaction of the hydrogenperoxide + hydroquinone system. Under optimum conditions, the as-prepared biosensor shows a good linear relationship between the current value and logarithm of the target DNA concentration ranging from 0.001 pM to 100 pM and a detection limit as low as 0.12 fM. Moreover, the fabricated biosensor exhibits good selectivity to differentiate the one-base mismatched DNA sequence. This work will open a pathway for ultrasensitive detection of other biorecognition events and gene-related diseases based on layered WS₂-AB and hybridization chain reaction.

Recovery and separation of erythromycin from industrial wastewater by imprinted magnetic nanoparticles that exploit β-cyclodextrin as the functional monomer

A type of surface imprinting over magnetic Fe3 O4 nanoparticles utilizing erythromycin-A as a template for use in the separation and recovery of erythromycin was developed and investigated. As the intermolecular forces play a key role in the performance of imprinted materials, differential scanning calorimetry, and (1) H NMR spectroscopy was employed to evaluate the interactions between erythromycin and the functional monomer β-cyclodextrin. To synthesize the surface imprinted polymers, magnetic Fe3 O4 nanoparticles, the core materials, were modified with a free radical initiator to initialize polymerization in a "grafting from" manner. Then using acryloyl-modified β-cyclodextrin as the functional monomer and ethyleneglycol dimethacrylate as the cross-linker, thin erythromycin-imprinted films were fabricated by the radical-induced graft copolymerization of monomers on the surface of the Fe3 O4 nanoparticles. Selectivity experiments showed that the erythromycin-A-imprinted materials had recognition ability toward erythromycin derivatives. Finally, these magnetic molecularly imprinted particles were successfully used for the separation and enrichment of erythromycin from the mother liquor. The recovery, detected by high-performance liquid chromatography and differential pulse voltammetry, approached 97%. The combination of the specific selectivity of the imprinted material and the magnetic separation provided a powerful tool that is simple, flexible, and selective for the separation and recovery of erythromycin.

Electrochemical oxidation and detection of paeonol on modified electrode with acetylene black nanoparticles

With an aim to construct a sensing platform for the electrochemical detection of paeonol, we modified the glassy carbon electrode with acetylene black nanoparticle (AB). A sensitive oxidation peak of paeonol was observed with remarkably increased peak current on the modified electrode because the electrode has a big surface area due to three dimensional structure of AB nanoparticles. The optimization of detection conditions was performed, including pH value of the buffer, the amount of AB nanoparticles on the electrode surface, the accumulation potential and time of paeonol. Under the optimized conditions, the oxidation peak current of paeonol increased linearly with its concentration over the range from 5×10(-7) to 1×10(-4) M. The detection limit was calculated to be 1×10(-7) M. The modified electrode was successfully applied to detect the content of paeonol in cortex moutan, a common traditional Chinese medicine. The method is new, sensitive, rapid and convenient for the detection of paeonol.