Coimmobilization of heparin/fibronectin mixture on titanium surfaces and their blood compatibility

Surface modification of silica nonwoven fabrics for osteogenesis of bone marrow-derived mesenchymal stem cells

Silica nonwoven fabrics (SNFs) with high mechanical strength and porosity are known to exhibit high cell proliferation and osteogenic differentiation potential of mesenchymal stem cells (MSCs) by morphologically mimicking the extracellular matrix (ECM). To further improve the osteoinductive ability of SNFs, it could be effective to increase the interaction between MSCs and ECM components because exogenous ECM components seem to modulate the fate of MSCs differentiation. In this study, we developed immobilization methods for ECM components, such as collagen, fibronectin, and chondroitin sulphate C on SNFs, to improve cell-matrix interactions and examined their suitability for bone tissue regeneration. Collagen and fibronectin were immobilized via physical adsorption and chondroitin sulphate C was also immobilized by the layer-by-layer method combined with chitosan on SNF surfaces to maintain the high porosity of SNFs. The treated SNFs were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. In osteogenic differentiation culture, modified SNFs showed significantly increased expression of osteogenic differentiation marker genes compared to unmodified SNFs. These results suggest that the present methods improve cell-matrix interactions and enhance the cellular functions of MSCs. We are convinced that these simple modification techniques for ECM components are effective in functionalizing various 3D fabric scaffolds possessing hydrophilic groups.

Surface functionalization of anticoagulation and anti-nonspecific adsorption with recombinant hirudin modification

Surface functionalization to improve the blood compatibility is pivotal for the application of biomaterials. In this article, the surface of silicon was first functionalized with chemical groups, such as amino, quinone and phenol groups by the self-polymerization of dopamine, which were used to immobilize anticoagulant drugs hirudin. The detailed analysis and discussion about the grafting groups, morphology, wettability, the dynamic adsorption of proteins, the cytological property and the blood compatibility on the surfaces were carried on by the technology of contact angle, X-ray photoelectron spectroscopy, quartz crystal microbalance, endothelial cells culture and anticoagulant blood test in vivo. The surface with hirudin modification exhibited hydrophilic property and significantly inhibited the nonspecific adsorption of albumin, while it was more approachable to fibronectin. In vitro study displayed that the surface loaded with hirudin could promote the proliferation of endothelial cells. The evaluation of anticoagulant showed good anti-adhesion effect on platelets and the hemolysis rate decreased significantly to less than 0.4%. Activated partial thromboplastin time (APTT) of the silicon wafer loaded with hirudin can exceed 38 s, and the APTT prolongs as the hirudin concentration rises. This study suggested that such simple but effective surface functionalization technique, combining excellent anticoagulant activity together with reendothelialization potential due to the preferable fibronectin adsorption, provide great practical significance to the application of cardiovascular materials.

Blood biocompatibility enhancement of biomaterials by heparin immobilization: a review

Blood contacting materials are concerned with biocompatibility including thrombus formation, decrease blood coagulation time, hematology, activation of complement system, platelet aggression. Interestingly, recent research suggests that biocompatibility is increasing by incorporating various materials including heparin using different methods. Basic of heparin including uses and complications was mentioned, in which burst release of heparin is major issue. To minimize the problem of biocompatibility and unpredictable heparin release, present review article potentially reviews the reported work and investigates the various immobilization methods of heparin onto biomaterials, such as polymers, metals, and alloys. Detailed explanation of different immobilization methods through different intermediates, activation, incubation method, plasma treatment, irradiations and other methods are also discussed, in which immobilization through intermediates is the most exploitable method. In addition to biocompatibility, other required properties of biomaterials like mechanical and corrosion resistance properties that increase by attachment of heparin are reviewed and discussed in this article.

Single and multi-functional coating strategies for enhancing the biocompatibility and tissue integration of blood-contacting medical implants

Device-associated clot formation and poor tissue integration are ongoing problems with permanent and temporary implantable medical devices. These complications lead to increased rates of mortality and morbidity and impose a burden on healthcare systems. In this review, we outline the current approaches for developing single and multi-functional surface coating techniques that aim to circumvent the limitations associated with existing blood-contacting medical devices. We focus on surface coatings that possess dual hemocompatibility and biofunctionality features and discuss their advantages and shortcomings to providing a biocompatible and biodynamic interface between the medical implant and blood. Lastly, we outline the newly developed surface modification techniques that use lubricant-infused coatings and discuss their unique potential and limitations in mitigating medical device-associated complications.

Programmed Release of Multimodal, Cross-Linked Vascular Endothelial Growth Factor and Heparin Layers on Electrospun Polycaprolactone Vascular Grafts

Viable tissue-engineering small-diameter vascular grafts should support rapid growth of an endothelial cell layer and exhibit long-term antithrombogenic property. In this study, multiple layers of various bioactive molecules, such as vascular endothelial growth factor (VEGF) and heparin, on an electrospun polycaprolactone scaffold have been developed through repeated electrostatic adsorption self-assembly (up to 20 layers), followed by genipin cross-linking. Programmed and sustained release of biomolecules embedded within the multilayered structure can be triggered by matrix metallopeptidase 2 enzyme in vitro. The result is an early and full release of VEGF to promote rapid endothelialization on the intended vascular grafts, followed by a gradual but sustained release of heparin for long-term anticoagulation and antithrombogenicity. This method of forming a biologically responsive, multimodal delivery of VEGF and heparin is highly suitable for all hydrophobic surfaces and provides a promising way to meet the critical requirements of engineered small-diameter vascular grafts.

Multilayered Hollow Tubes as Blood Vessel Substitutes

The available therapies for cardiovascular pathologies often require the replacement of diseased vascular grafts. However, the current blood vessel substitutes are unsuitable for small-diameter blood vessel replacements. Herein, we propose the creation of multilayered hollow tubes as blood vessel substitutes. Hollow tubes were obtained by building-up multilayers of marine-derived polysaccharides (i.e., chitosan and alginate) on sacrificial tubular templates using layer-by-layer technology and template leaching. A cross-linking degree of ≈59% was achieved using genipin, which is reflected in an increase of the mechanical properties and a decrease of the water uptake. To further improve the cell adhesive properties of the multilayers, fibronectin (FN) was immobilized on the surface of the hollow tubes. The in vitro biological performance of human umbilical vein endothelial cells (HUVECs) and human aortic smooth muscle cells (HASMCs) was assessed. In addition, to perform the culture of HUVECs on the inner side and the HASMCs on the outer side of the tubes, an in-house developed apparatus was created that allowed us to feed cells with their respective culture medium. The developed hollow tubes were shown to be a suitable structure to promote cell adhesion, spreading, and proliferation. It is our belief that the creation of these functional structures will open a new research field in order to develop innovative multilayered tubular structures for cardiovascular TE applications.

Unravelling the potential of nitric acid as a surface modifier for improving the hemocompatibility of metallocene polyethylene for blood contacting devices

Design of blood compatible surfaces is obligatory to minimize platelet surface interactions and improve the thromboresistance of foreign surfaces when they are utilized as biomaterials particularly for blood contacting devices. Pure metallocene polyethylene (mPE) and nitric acid (HNO3) treated mPE antithrombogenicity and hydrophilicity were investigated. The contact angle of the mPE treated with HNO3 decreased. Surface of mPE and HNO3 treated mPE investigated with FTIR revealed no major changes in its functional groups. 3D Hirox digital microscopy, SEM and AFM images show increased porosity and surface roughness. Blood coagulation assays prothrombin time (PT) and activated partial thromboplastin time (APTT) were delayed significantly (P < 0.05) for HNO3 treated mPE. Hemolysis assay and platelet adhesion of the treated surface resulted in the lysis of red blood cells and platelet adherence, respectively indicating improved hemocompatibility of HNO3 treated mPE. To determine that HNO3 does not deteriorate elastic modulus of mPE, the elastic modulus of mPE and HNO3 treated mPE was compared and the result shows no significant difference. Hence, the overall observation suggests that the novel HNO3 treated mPE may hold great promises to be exploited for blood contacting devices like grafts, catheters, and etc.

Surface modification and endothelialization of biomaterials as potential scaffolds for vascular tissue engineering applications

This review highlights the recent developments of surface modification and endothelialization of biomaterials in vascular tissue engineering applications.

Blood compatible materials: state of the art

Devices that function in contact with blood are ubiquitous in clinical medicine and biotechnology. These devices include vascular grafts, coronary stents, heart valves, catheters, hemodialysers, heart-lung bypass systems and many others. Blood contact generally leads to thrombosis (among other adverse outcomes), and no material has yet been developed which remains thrombus-free indefinitely and in all situations: extracorporeally, in the venous circulation and in the arterial circulation. In this article knowledge on blood-material interactions and "thromboresistant" materials is reviewed. Current approaches to the development of thromboresistant materials are discussed including surface passivation; incorporation and/or release of anticoagulants, antiplatelet agents and thrombolytic agents; and mimicry of the vascular endothelium.

The endothelialization and hemocompatibility of the functional multilayer on titanium surface constructed with type IV collagen and heparin

The type IV collagen/heparin (IVCol/Hep) multilayer was developed on amino-silanized titanium (Ti) surface layer by layer self-assembly. Ti, TiOH, TiOHA and TiOHA(HC)3H were characterized by Fourier transform infrared spectroscopy (FTIR), water contact angle measurements and scanning electron microscopy (SEM), respectively. Alcian Blue 8GX staining and immunofluorescence staining were used to characterize the heparin (Hep) and type IV collagen (IVCol), respectively. The blood compatibilities of Ti and the treated Ti were evaluated by platelet adhesion test and clotting time using PRP. Blood compatibility tests reveal that the assembled functional multilayer displayed less platelets adhesion and prolonged APTTs time compared with the controlled Ti. Endothelial cells (ECs) culture results showed more attached and proliferated ECs on the TiOHA(HC)3H than that on Ti, especially compared with that on TiOH and TiOHA. Thus, the assembled Hep and IVCol multilayer can improve the cell compatibility and the blood compatibility. We anticipate that this IVCol/Hep functional multilayer will be beneficial to enhance the biocompatibility of the Ti-based biomaterial devices.