Self-assembly behavior of peptide amphiphiles (PAs) with different length of hydrophobic alkyl tails

Influence of chirality and sequence in lysine-rich lipopeptide biosurfactants and micellar model colloid systems

Lipopeptides can self-assemble into diverse nanostructures which can be programmed to incorporate peptide sequences to achieve a remarkable range of bioactivities. Here, the influence of peptide sequence and chirality on micelle structure and interactions is investigated in a series of lipopeptides bearing two lysine or D-lysine residues and tyrosine or tryptophan residues, attached to a hexadecyl lipid chain. All molecules self-assemble into micelles above a critical micelle concentration (CMC). Small-angle x-ray scattering (SAXS) is used to probe micelle shape and structure from the form factor and to probe inter-micellar interactions via analysis of structure factor. The CMC is obtained consistently from surface tension and electrical conductivity measurements. We introduce a method to obtain the zeta potential from the SAXS structure factor which is in good agreement with directly measured values. Atomistic molecular dynamics simulations provide insights into molecular packing and conformation within the lipopeptide micelles which constitute model self-assembling colloidal systems and biomaterials.

Amphiphilic hydroxyethyl starch-based nanoparticles carrying linoleic acid modified berberine inhibit the expression of krasv12 oncogene in zebrafish

Cancer is one of the most lethal diseases all over the world. Despite that many drugs have been developed for cancer therapy, they still suffer from various limitations including poor treating efficacy, toxicity to normal human cells, and the emergence of multidrug resistance. In this study, the amphiphilic LHES polymers were prepared using hydroxyethyl starch (HES) and linoleic acid as starting materials. The content and substitution degree of linoleic acid groups in LHES polymers were analyzed. The LHES polymers were used for fabricating LHES-B nanoparticles carrying a linoleic acid modified berberine derivative (L-BBR). The LHES-B nanoparticles showed high drug loading efficiency (29%) and could quickly release L-BBR under acidic pH condition (pH = 4.5). Biological investigations revealed that LHES-B nanoparticles significantly inhibited the proliferation of HepG2 cells and exhibited higher cytotoxicity than L-BBR. In a transgenic Tg(fabp10:rtTA2s-M2; TRE2:EGFP-krasv12) zebrafish model, LHES-B nanoparticles obviously inhibited the expression of krasv12 oncogene. These results indicated that LHES carriers could improve the anticancer activity of L-BBR, and the synthesized LHES-B nanoparticles showed great potential as anticancer drug.

Programming Peptide Liquid Crystal Media to Acquire Independent Sets of Residual Dipolar Couplings and Enantiodiscrimination in Multiple Solvent Systems

Multiple independent sets of residual dipolar couplings (RDCs) acquired by relying on different alignment media show the great potential for de novo structure determination of organic compounds. However, this methodology is severely compromised by the limited availability of multialignment media. In this work, an engineering strategy was developed to program the oligopeptide amphiphiles (OPAs) to create different peptide liquid crystal (LC) media for the acquisition of independent sets of RDCs. With no need for de novo design on peptide sequences, the molecular alignment can be simply modulated by varying the length of the hydrophobic tails within OPAs. Relying on these programmed peptide LC media, five independent sets of RDCs were extracted in a highly efficient and accurate manner. Because of the similar bulk composition of OPAs, this approach offers the significant advantage in circumventing the possible incompatibilities of analytes with one or several different alignment media, therefore avoiding the analysis complication. Notably, these peptide LC media show enantiodifferentiating properties, and the enantiodiscriminating capabilities could also be optimized through the programmed strategy. Furthermore, we show that these media are compatible with different polar solvents, allowing the possible de novo structure elucidation of organic compounds with varied polarities and solubilities.

Metal-Chelating Self-Assembling Peptide Nanofiber Scaffolds for Modulation of Neuronal Cell Behavior

Synthetic peptides are promising structural and functional components of bioactive and tissue-engineering scaffolds. Here, we demonstrate the design of self-assembling nanofiber scaffolds based on peptide amphiphile (PA) molecules containing multi-functional histidine residues with trace metal (TM) coordination ability. The self-assembly of PAs and characteristics of PA nanofiber scaffolds along with their interaction with Zn, Cu, and Mn essential microelements were studied. The effects of TM-activated PA scaffolds on mammalian cell behavior, reactive oxygen species (ROS), and glutathione levels were shown. The study reveals the ability of these scaffolds to modulate adhesion, proliferation, and morphological differentiation of neuronal PC-12 cells, suggesting a particular role of Mn(II) in cell-matrix interaction and neuritogenesis. The results provide a proof-of-concept for the development of histidine-functionalized peptide nanofiber scaffolds activated with ROS- and cell-modulating TMs to induce regenerative responses.

Novel amphiphilic hydroxyethyl starch-based nanoparticles loading camptothecin exhibit high anticancer activity in HepG2 cells and zebrafish

Camptothecin is a naturally occurred anticancer drug but exhibits limitations including poor aqueous solubility, low bioavailability, and high level of adverse drug reactions on normal organs. To overcome these problems, this paper developed a novel amphiphilic Lau-Leu-HES carrier using hydroxyethyl starch, lauric acid, and L-leucine as starting materials. The carrier was successfully applied to prepare Lau-Leu-HES nanoparticles loading camptothecin. The drug loading efficiency and encapsulation efficiency of the nanoparticles were calculated to be 29.04% and 81.85%, respectively. The nanoparticles exhibited high zeta potential (-15.51 mV) and small hydrodynamic diameter (105.4 nm). Camptothecin in nanoparticles could be rapidly released under acidic condition (pH = 4.5), thereby indicating the high sensitivity under cancer microenvironments. Anticancer investigation revealed that the nanoparticles could inhibit the proliferation of HepG2 cells in vitro. Compared with commercial available drug doxorubicin, the nanoparticles could significantly inhibit the expression of kras^v12 oncogene in transgenic Tg (EGFP-kras^V12) zebrafish. These results indicate that the camptothecin-loaded Lau-Leu-HES nanoparticles are expected to be a potential candidate for cancer therapy.

Influence of chain length on the anticancer activity of the antimicrobial peptide CAMEL with fatty acid modification

Antimicrobial peptides (AMPs) display promising potential in cancer therapy. Modification with fatty acids is a simple and effective approach to improve the activity of AMPs. In the present study, we investigated the effects of fatty acid chain lengths on the anticancer activity, self-assembly and mechanism of action of CAMEL (CM15, KWKLFKKIGAVLKVL-NH₂), an amphipathic AMP with 15 amino acids. Conjugation of fatty acids could obviously improve the in vitro anticancer activity of CAMEL. Among the tested peptides, C12-CAMEL showed the highest anticancer activity, while C16-CAMEL killed cancer cells with the slowest kinetics. This may be related to the self-assembly of C12-CAMEL and C16-CAMEL, which could form spherical nanoparticles and tightened nanofibers, respectively. In addition, necrosis and necroptosis rather than apoptosis were the major mechanisms underlying the anticancer activity of CAMEL, C12-CAMEL and C16-CAMEL, implying that modification with fatty acids did not obviously alter the mechanism of action of CAMEL. Notably, C12-CAMEL, with high and rapid cell-killing activity, exhibited significantly stronger in vivo anticancer activity than CAMEL and C16-CAMEL. Overall, the present work suggests that the choice of a suitable fatty acid for structural modification is necessary for improving the anticancer activity of AMPs.

Development of Anticancer Peptides with Low Hemolysis, High Penetrating Membrane Activity, Certain Analgesic Activity and the Synergistic Anticancer Effect

Herein, an amphiphilic cationic α-helical anticancer lipopeptide P10 with the low toxicity and high penetrating membrane activity was developed. The lipopeptide could self-assemble into stable spherical aggregates in aqueous solution,...

Glucose-Fueled Peptide Assembly: Glucagon Delivery via Enzymatic Actuation

Nature achieves remarkable function from the formation of transient, nonequilibrium materials realized through continuous energy input. The role of enzymes in catalyzing chemical transformations to drive such processes, often as part of stimuli-directed signaling, governs both material formation and lifetime. Inspired by the intricate nonequilibrium nanostructures of the living world, this work seeks to create transient materials in the presence of a consumable glucose stimulus under enzymatic control of glucose oxidase. Compared to traditional glucose-responsive materials, which typically engineer degradation to release insulin under high-glucose conditions, the transient nanofibrillar hydrogel materials here are stabilized in the presence of glucose but destabilized under conditions of limited glucose to release encapsulated glucagon. In the context of blood glucose control, glucagon offers a key antagonist to insulin in responding to hypoglycemia by signaling the release of glucose stored in tissues so as to restore normal blood glucose levels. Accordingly, these materials are evaluated in a prophylactic capacity in diabetic mice to release glucagon in response to a sudden drop in blood glucose brought on by an insulin overdose. Delivery of glucagon using glucose-fueled nanofibrillar hydrogels succeeds in limiting the onset and severity of hypoglycemia in mice. This general strategy points to a new paradigm in glucose-responsive materials, leveraging glucose as a stabilizing cue for responsive glucagon delivery in combating hypoglycemia. Moreover, compared to most fundamental reports achieving nonequilibrium and/or fueled classes of materials, the present work offers a rare functional example using a disease-relevant fuel to drive deployment of a therapeutic.

Hydrogel-Stiffening and Non-Cell Adhesive Properties of Amphiphilic Peptides with Central Alkylene Chains

Amphiphilic peptides bearing terminal alkyl tails form supramolecular nanofibers that are increasingly used as biomaterials with multiple functionalities. Insertion of alkylene chains in peptides can be designed as another type of amphiphilic peptide, yet the influence of the internal alkylene chains on self-assembly and biological properties remains poorly defined. Unlike the terminal alkyl tails, the internal alkylene chains can affect not only the hydrophobicity but also the flexibility and packing of the peptides. Herein, we demonstrate the supramolecular and biological effects of the central alkylene chain length inserted in a peptide. Insertion of the alkylene chain at the center of the peptide allowed for strengthened β-sheet hydrogen bonds and modulation of the packing order, and consequently the amphiphilic peptide bearing C2 alkylene chain formed a hydrogel with the highest stiffness. Interestingly, the amphiphilic peptides bearing internal alkylene chains longer than C2 showed a diminished cell-adhesive property. This study offers a novel molecular design to tune mechanical and biological properties of peptide materials.

Pushing and Pulling: A Dual pH Trigger Controlled by Varying the Alkyl Tail Length in Heme Coordinating Peptide Amphiphiles

Some organisms in nature that undergo anaerobic respiration utilize 1D nanoscale arrays of densely packed cytochromes containing the molecule heme. The assemblies can be mimicked with 1D nanoscale fibrils composed of peptide amphiphiles designed to coordinate heme in dense arrays. To create such materials and assemblies, it is critical to understand the assembly process and what controls the various aspects of hierarchical assembly. MD simulations suggest that shorter alkyl chains on the peptide lead to more dynamic structures than the peptides with longer chains that yield kinetically trapped states. The hydration parameters manifest themselves experimentally through the observation of a dual pH trigger, which controls the peptide assembly rate, the heme binding affinity, and heme organization kinetics. Great strides in understanding the relative complexity of the self-assembly process in relation to incorporating a functional moiety like heme opens up many possibilities in developing abiotic assemblies for bioelectronic devices and assemblies.

Nanoribbon self-assembly and hydrogel formation from an NOctanoyl octapeptide derived from the antiparallel β-Interface of a protein homotetramer

The effect of installing different lipid chains (C₆, C₈, C₁₀, and C₁₆) on the N-terminus of an octapeptide derived from the antiparallel β-interface of the diaminopimelate decarboxylase protein homotetramer has been investigated. Notably, the C₈ peptide conjugate assembled into wide twisted nanoribbons and formed hydrogels, which to the best of our knowledge constitutes the first example of a peptide containing an eight carbon alkyl chain that demonstrates these properties, a space typically occupied by peptide amphiphiles with long lipid chains. Furthermore, this self-assembling lipopeptide exhibited pH and temperature stability with shear thinning properties suitable for biomedical applications. Importantly, in this work the application of the polystyrene-based sorbent Diaion™ HP20SS for the simple large-scale purification of self-assembling peptides is presented as an alternative to the use of time-consuming and labor-intensive reverse-phase high-performance liquid chromatography. STATEMENT OF SIGNIFICANCE: Peptides that can self-assemble into defined nanostructures are highly attractive for many biomedical applications given their unique physical and chemical properties. It is recognized that self-assembling peptides derived from naturally occurring proteins offer an unlimited source of functionalities and structures, which are hard to uncover with designed sequences. In this study, we have investigated the effect of installing different lipids chains on the N-terminus of an octapeptide derived from the antiparallel β-interface of the diaminopimelate decarboxylase protein homo tetramer. We also reported the use of polymeric Diaion^Ⓡ HP20SS beads as an alternative solid support to purify self-assembling peptides.

Polymorphic Self-Organization of Lauroyl Peptide in Response to pH and Concentration

Amphipathic peptides are attractive building blocks for the preparation of self-assembling, bio-inspired, and stimuli responsive nanomaterials with pharmaceutical interest. The bioavailability of these materials can be improved with the insertion of d amino acid residues to avoid fast proteolysis in vivo. With this knowledge, a new lauroyl peptide consisting of a sequence of glycine, glycine, d-serine, and d-lysine was designed. In spite of its simple sequence, this lipopeptide self-assembles into spherical micelles at acid pH, when the peptide moiety adopts disordered conformations. Self-aggregates reshape toward fibers at basic pH, following the conformational transition of the peptide region from random coil to β-sheet. Finally, hydrogels are achieved at basic pH and higher concentrations. The transition from random coil to β-sheet conformation of the peptide headgroup obtained by increasing pH was monitored by circular dichroism and vibrational spectroscopy. A structural analysis, performed by combining dynamic light scattering, small-angle X-ray scattering, transmission electron microscopy, and molecular dynamic simulations, demonstrated that the transition allows the self-assemblies to remodel from spherical micelles to rodlike shapes, to long fibers with rectangular cross-section and a head-tail-tail-head structure. The viscoelastic behavior of the hydrogels formed at the highest pH was investigated by rheology measurements.

Encapsulation of an endostatin peptide in liposomes: Stability, release, and cytotoxicity study

The endostatin protein is a potent inhibitor of angiogenesis and tumor growth. The anti-angiogenic and antitumor properties of full-length endostatin can be mimicked by its N-terminal segment, including residues 1-27. Therefore, our previous studies have shown that a mutant N-terminal peptide which the Zn-binding loop was replaced by a disulfide loop (referred to as the ES-SS peptide) has preserved antiangiogenic and antitumor properties compared to the native peptide. To increase stability and plasma half-life of the ES-SS peptide, the nano-sized liposomal formulations of the peptide with different ratio of phosphocholine (PC) were synthesized. The liposomal peptide formulations possessed an average size of around 100 nm with (-4 to -36 mv) in zeta potential. The encapsulation efficiency of the ES-SS peptide was in the range of 24-54% with different lipid: peptide molar ratios. In vitro release of the peptide from liposomes indicated a complete peptide release after 7 days. Cytotoxicity assay was evaluated using the human umbilical vein endothelial cells (HUVECs) for various concentrations of the liposomal peptide. The results depicted the gradual release of the peptide through liposomes. By comparing with the free peptide, the liposomal peptide formulations have indicated higher cell viability with IC₅₀ value about 0.1 μM. The peptide-liposome interactions, as well as the peptide effect on the liposome structure, were also investigated through coarse-grained molecular dynamics (CG-MD) simulation. The results revealed that the peptides were assembled in the hydrophilic core of the liposome. The peptide behavior in liposome can stabilize the liposome structure and be a response to the observed low peptide release rate. The investigation is promising for designing a liposome-based anti-angiogenesis peptide delivery system.

Self-assembling injectable peptide hydrogels for emerging treatment of ischemic stroke

Ischaemic stroke remains one of the leading causes of death and disability worldwide, without any long-term effective treatments targeted at regeneration. This has led to developments of novel, biomaterial-based strategies using self-assembling peptide hydrogels.

A combination of bioactive and nonbioactive alkyl-peptides form a more stable nanofiber structure for differentiating neural stem cells: a molecular dynamics simulation survey

Self-assembling alkyl-peptides are important molecules due to their ability to construct nano-level structures such as nanofibers to be utilized as tissue engineering scaffolds. The bioactive epitope of FAQRVPP which acts as neural stem cells (NSCs) outgrowth inducing factor is used in nanofiber structures. Based on previous experimental studies the density and distribution pattern of the epitopes on the surface of the nanofibers plays an important role in the differentiation function efficiency. We decided to survey and compare the stability of two pre-constructed fiber structures in the forms of all-functionalized nanofiber (containing only bioactive alkyl-peptides) and distributed functionalized nanofiber (a combination of nonbioactive and bioactive alkyl-peptides with ratio 2:1). Our findings reveal that the all-functionalized fiber shows an unstable structure and is split into intermediate micelle-like structures to reduce compactness and steric hindrance of functional epitopes whereas the distributed functionalized fiber shows an integrated stable nanofiber with a more amount of beta sheets that are well-organized and oriented around the hydrophobic core. The hydrogen bonds and energy profiles of the structures indicate the role of hydrophobic interactions during the alkyl-chain core formation and the important role of electrostatic interactions and hydrogen bond network in the stability of the final structures. Finally, it seems that the possibility of the presence of intermediate structure is increased in the all-functionalized nanofiber environment, and it can reduce functional efficiency of the scaffolds. These findings can help to design more efficient nanofiber structures with different goals in scaffolds for tissue engineering. Abbreviations MD Molecular Dynamics NSCs Neural Stem Cells PME Particle mesh Ewald RDF Radial Distribution Function RG Radius of gyration RASA Relative Accessible Surface Area RMSD Root Mean Square Deviations SASA Solvent Accessible Surface Area. Communicated by Ramaswamy H. Sarma.

Genetically encoded lipid-polypeptide hybrid biomaterials that exhibit temperature-triggered hierarchical self-assembly

Post-translational modification of proteins is a strategy widely used in biological systems. It expands the diversity of the proteome and allows for tailoring of both the function and localization of proteins within cells as well as the material properties of structural proteins and matrices. Despite their ubiquity in biology, with a few exceptions, the potential of post-translational modifications in biomaterials synthesis has remained largely untapped. As a proof of concept to demonstrate the feasibility of creating a genetically encoded biohybrid material through post-translational modification, we report here the generation of a family of three stimulus-responsive hybrid materials-fatty-acid-modified elastin-like polypeptides-using a one-pot recombinant expression and post-translational lipidation methodology. These hybrid biomaterials contain an amphiphilic domain, composed of a β-sheet-forming peptide that is post-translationally functionalized with a C14 alkyl chain, fused to a thermally responsive elastin-like polypeptide. They exhibit temperature-triggered hierarchical self-assembly across multiple length scales with varied structure and material properties that can be controlled at the sequence level.

Self-assembly of model short triblock amphiphiles in dilute solution

In this work, a molecular theory is used to study the self-assembly of short diblock and triblock amphiphiles, with head-tail and head-linker-tail structures, respectively. The theory was used to systematically explore the effects of the molecular architecture and the affinity of the solvent for the linker and tail blocks on the relative stability of the different nanostructures formed by the amphiphiles in dilute solution, which include spherical micelles, cylindrical fibers and planar lamellas. Moreover, the theory predicts that each of these nanostructures can adopt two different types of internal organization: (i) normal nanostructures with a core composed of tail segments and a corona composed of head segments, and (ii) nanostructures with a core formed by linker segments and a corona formed by tail and head segments. The theory predicts the occurrence of a transition from micelle to fiber to lamella when increasing the length of the tail or the linker blocks, which is in qualitative agreement with the geometric packing theory and with experiments in the literature. The theory also predicts a transition from micelle to fiber to lamella as the affinity of the solvent for the tail or linker block is decreased. This result is also in qualitative agreement with experiments in the literature but cannot be explained in terms of the geometric packing theory. The molecular theory provides an explanation for this result in terms of the competition between solvophobic attractions among segments in the core and steric repulsions between segments in the corona for the different types of self-assembled nanostructures.

Antimicrobial activity and self-assembly behavior of antimicrobial peptide chensinin-1b with lipophilic alkyl tails

The threshold hydrophobicity and amphipathic structure of the peptidic chain are important for the biological function of antimicrobial peptides. Chensinin-1b exhibits broad-spectrum bactericidal activity with no hemolytic activity but has almost no anticancer ability against the selected cancer cell lines. In this study, the conjugation of aliphatic acid was designed with different lengths of N-terminal of chensinin-1b, the antimicrobial activity of the resulting lipo-chensinin-1b was examined, in which OA-C1b showed much stronger activity than those of cheninin-1b and the other two lipopeptides. The membrane interaction between the lipo-chensinin-1b and real/mimetic bacterial cell membrane was investigated. Electrostatic interactions between the lipo-chensinin-1b and lipopolysaccharides were detected by isothermal titration calorimetry and the binding affinities were 10.83 μM, 8.77 μM and 7.35 μM for OA-C1b, LA-C1b and PA-C1b, respectively. The antimicrobial activity and membrane interaction ability of the lipo-chensinin-1b followed this order: OA-C1b > chensinin-1b > LA-C1b > PA-C1b. In addition, the lipo-chensinin-1b also exhibited lytic activity against various cancer cells and demonstrated the ability to inhibit LPS-stimulated cytokine release from human U937 cells. The CD spectra indicated that the helical or β-strands contents were existed as the main components in TFE or LPS solution, respectively. The self-assembly behavior was trigged by the solution pH and affected by the length of carbon chain, in which chensinin-1b, OA-C1b, LA-C1b and PA-C1b formed micelles at neutral pH and the micelle size increased for chensinin-1b, OA-C1b and LA-C1b. PA-C1b formed nanofibers in an acidic environment indicated by TEM experiments, and the peptides formed aggregates in an acidic environment and re-dissociated when the pH was adjusted to neutral.

Co-assembly of helical β3-peptides: a self-assembled analogue of a statistical copolymer

Unnatural peptide self-assembly offers the means to design hierarchical nanostructures of controlled geometries, chemical function and physical properties. N-acyl β3 peptides, where all residues are unnatural amino acids, are able to form helical fibrous structures by a head-to-tail assembly of helical monomers, extending the helix via a three point supramolecular hydrogen bonding motif. These helical nanorods were shown to be stable under a wide range of physical conditions, offering a self-assembled analogue of polymeric fibres. Hitherto the self-assembly has only been demonstrated between identical monomers; however the self-assembly motif is sequence-independent, offering the possibility of hetero-assembly of different peptide monomers. Here we present a proof of principle study of head-to-tail co-assembly of two different helical unnatural peptides Ac-β3[WELWEL] and Ac-β3[LIA], where the letters denote the β3 analogues of natural amino acids. By atomic force microscopy imaging it was demonstrated that the homo-assembly and co-assembly of these peptides yield characteristically different structures. Synchrotron small angle X-ray scattering experiments have confirmed the presence of the fibres in the solution and the averaged diameters from modelled data correlate well to the results of AFM imaging. Hence, there is evidence of co-assembly of the fibrous superstructures; given that different monomers may be used to introduce variations into chemical and physical properties, the results demonstrate a self-assembled analogue of a statistical co-polymer that can be used in designing complex functional nanomaterials.

Self-assembled peptide nanostructures for functional materials

Nature is an important inspirational source for scientists, and presents complex and elegant examples of adaptive and intelligent systems created by self-assembly. Significant effort has been devoted to understanding these sophisticated systems. The self-assembly process enables us to create supramolecular nanostructures with high order and complexity, and peptide-based self-assembling building blocks can serve as suitable platforms to construct nanostructures showing diverse features and applications. In this review, peptide-based supramolecular assemblies will be discussed in terms of their synthesis, design, characterization and application. Peptide nanostructures are categorized based on their chemical and physical properties and will be examined by rationalizing the influence of peptide design on the resulting morphology and the methods employed to characterize these high order complex systems. Moreover, the application of self-assembled peptide nanomaterials as functional materials in information technologies and environmental sciences will be reviewed by providing examples from recently published high-impact studies.

Tailoring self-assembly behavior of a biological surfactant by imidazolium-based surfactants with different lengths of hydrophobic alkyl tails

Possible molecular packing model of microcrystal structures formed by NaDC and [C₂mim]Br.

Modulating self-assembly behavior of a salt-free peptide amphiphile (PA) and zwitterionic surfactant mixed system

A salt-free surfactant system formed by a peptide amphiphile with short headgroup (PA,C16-GK-3) and a zwitterionic surfactant (dodecyldimethylamine oxide, C12DMAO) in water has been systematically investigated. The microstructures and properties of C16-GK-3/C12DMAO mixed system were characterized using a combination of microscopic, scattering and spectroscopic techniques, including transmission electron microscopy (TEM), field emission-scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), Fourier transform infrared (FT-IR), circular dichroism (CD) and rheological measurements. Rich phase transitions have been observed by adjusting the concentration of C16-GK-3. Investigation of the hydrogels of C16-GK-3/C12DMAO with TEM, SEM and AFM showed that all of these hydrogels form nanobelts. The nanobelt formation is performed in a hierarchical manner: β-sheet peptides and C12DMAO first interact each other to form small aggregates, which then arrange themselves to form one dimensional (1D) left-handed ribbons. The ribbons further aggregated into flat and rigid nanobelts. We proposed a mechanism to interpret the self-assembly process according to the specific peptide structure as well as multiple equilibria between the hydrogen bonding interactions between the headgroups of C16-GK-3, between C12DMAO molecules and the headgroups of C16-GK-3, chirality of the amino acid residues and hydrophobic interactions of the alkyl chains.

Supramolecular Hydrogelators and Hydrogels: From Soft Matter to Molecular Biomaterials

In this review we intend to provide a relatively comprehensive summary of the work of supramolecular hydrogelators after 2004 and to put emphasis particularly on the applications of supramolecular hydrogels/hydrogelators as molecular biomaterials. After a brief introduction of methods for generating supramolecular hydrogels, we discuss supramolecular hydrogelators on the basis of their categories, such as small organic molecules, coordination complexes, peptides, nucleobases, and saccharides. Following molecular design, we focus on various potential applications of supramolecular hydrogels as molecular biomaterials, classified by their applications in cell cultures, tissue engineering, cell behavior, imaging, and unique applications of hydrogelators. Particularly, we discuss the applications of supramolecular hydrogelators after they form supramolecular assemblies but prior to reaching the critical gelation concentration because this subject is less explored but may hold equally great promise for helping address fundamental questions about the mechanisms or the consequences of the self-assembly of molecules, including low molecular weight ones. Finally, we provide a perspective on supramolecular hydrogelators. We hope that this review will serve as an updated introduction and reference for researchers who are interested in exploring supramolecular hydrogelators as molecular biomaterials for addressing the societal needs at various frontiers.

Peptide Amphiphiles in Corneal Tissue Engineering

The increasing interest in effort towards creating alternative therapies have led to exciting breakthroughs in the attempt to bio-fabricate and engineer live tissues. This has been particularly evident in the development of new approaches applied to reconstruct corneal tissue. The need for tissue-engineered corneas is largely a response to the shortage of donor tissue and the lack of suitable alternative biological scaffolds preventing the treatment of millions of blind people worldwide. This review is focused on recent developments in corneal tissue engineering, specifically on the use of self-assembling peptide amphiphiles for this purpose. Recently, peptide amphiphiles have generated great interest as therapeutic molecules, both in vitro and in vivo. Here we introduce this rapidly developing field, and examine innovative applications of peptide amphiphiles to create natural bio-prosthetic corneal tissue in vitro. The advantages of peptide amphiphiles over other biomaterials, namely their wide range of functions and applications, versatility, and transferability are also discussed to better understand how these fascinating molecules can help solve current challenges in corneal regeneration.

Molecular dynamics simulations of self-assembled peptide amphiphile based cylindrical nanofibers

We carried out united-atom molecular dynamics simulations to understand the structural properties of peptide amphiphile (PA)-based cylindrical nanofibers and the factors that play a role in the “Self-Assembly” process on some specific nanofibers.

Solvent effects on kinetic mechanisms of self-assembly by peptide amphiphiles via molecular dynamics simulations

Peptide amphiphiles are known to form a variety of distinctive self-assembled nanostructures (including cylindrical nanofibers in hydrogels) dependent upon the solvent conditions. Using a novel coarse-grained model, large-scale molecular dynamics simulations are performed on a system of 800 peptide amphiphiles (sequence, palmitoyl-Val3Ala3Glu3) to elucidate kinetic mechanisms of molecular assembly as a function of the solvent conditions. The assembly process is found to occur via a multistep process with transient intermediates that ultimately leads to the stabilized nanostructures including open networks of β-sheets, cylindrical nanofibers, and elongated micelles. Different kinetic mechanisms are compared in terms of peptide secondary structures, solvent-accessible surface area, radius of gyration, relative shape anisotropy, intra/intermolecular interactions, and aggregate size dynamics to provide insightful information for the design of functional biomaterials.

Role of hydrophobicity on self-assembly by peptide amphiphiles via molecular dynamics simulations

Using a novel coarse-grained model, large-scale molecular dynamics simulations were performed to examine self-assembly of 800 peptide amphiphiles (sequence palmitoyl-V3A3E3). Under suitable physiological conditions, these molecules readily assemble into nanofibers leading to hydrogel construction as observed in experiments. Our simulations capture this spontaneous self-assembly process, including formation of secondary structure, to identify morphological transitions of distinctive nanostructures. As the hydrophobic interaction is increased, progression from open networks of secondary structures toward closed cylindrical nanostructures containing either β-sheets or random coils are observed. Moreover, temperature effects are also determined to play an important role in regulating formation of secondary structures within those nanostructures. These understandings of the molecular interactions involved and the role of environmental factors on hydrogel formation provide useful insight for development of innovative smart biomaterials for biomedical applications.

The role of electrostatics and temperature on morphological transitions of hydrogel nanostructures self-assembled by peptide amphiphiles via molecular dynamics simulations

Smart biomaterials that are self-assembled from peptide amphiphiles (PA) are known to undergo morphological transitions in response to specific physiological stimuli. The design of such customizable hydrogels is of significant interest due to their potential applications in tissue engineering, biomedical imaging, and drug delivery. Using a novel coarse-grained peptide/polymer model, which has been validated by comparison of equilibrium conformations from atomistic simulations, large-scale molecular dynamics simulations are performed to examine the spontaneous self-assembly process. Starting from initial random configurations, these simulations result in the formation of nanostructures of various sizes and shapes as a function of the electrostatics and temperature. At optimal conditions, the self-assembly mechanism for the formation of cylindrical nanofibers is deciphered involving a series of steps: (1) PA molecules quickly undergo micellization whose driving force is the hydrophobic interactions between alkyl tails; (2) neighboring peptide residues within a micelle engage in a slow ordering process that leads to the formation of β-sheets exposing the hydrophobic core; (3) spherical micelles merge together through an end-to-end mechanism to form cylindrical nanofibers that exhibit high structural fidelity to the proposed structure based on experimental data. As the temperature and electrostatics vary, PA molecules undergo alternative kinetic mechanisms, resulting in the formation of a wide spectrum of nanostructures. A phase diagram in the electrostatics-temperature plane is constructed delineating regions of morphological transitions in response to external stimuli.

Elastin-like peptide amphiphiles form nanofibers with tunable length

Peptide amphiphiles (PAs) self-assemble nanostructures with potential applications in drug delivery and tissue engineering. Some PAs share environmentally responsive behavior with their peptide components. Here we report a new type of PAs biologically inspired from human tropoelastin. Above a lower critical solution temperature (LCST), elastin-like polypeptides (ELPs) undergo a reversible inverse phase transition. Similar to other PAs, elastin-like PAs (ELPAs) assemble micelles with fiber-like nanostructures. Similar to ELPs, ELPAs have inverse phase transition behavior. Here we demonstrate control over the ELPAs fiber length and cellular uptake. In addition, we observed that both peptide assembly and nanofiber phase separation are accompanied by a distinctive secondary structure attributed primarily to a type-1 β turn. We also demonstrate increased solubility of hydrophobic paclitaxel (PAX) in the presence of ELPAs. Due to their biodegradability, biocompatibility, and environmental responsiveness, elastin-inspired biopolymers are an emerging platform for drug and cell delivery; furthermore, the discovery of ELPAs may provide a new and useful approach to engineer these materials into stimuli-responsive gels and drug carriers.

Fatty acid-RGD peptide amphiphile micelles as potential paclitaxel delivery carriers to α(v)β₃ integrin overexpressing tumors

PURPOSE

To design and synthesize fatty acid-RGD peptide amphiphiles with ADA linker for their potential delivery of hydrophobic drugs like paclitaxel targeted to α(v)β(3) integrin overexpressing tumors.

METHODS

Four amphiphiles - C16 or C18 fatty acid-RGD peptide and ADA linker were designed and synthesized. CMC, size and zeta potential of the amphiphiles were determined. FITC loaded micelles uptake into A2058 melanoma cells was investigated at 4°C and 37°C using confocal microscopy. Paclitaxel was loaded into micelles, their encapsulation efficiency and cytotoxicity of micelles was evaluated. The stability of the micelles was determined using FRET method.

RESULTS

Mass, (1)H NMR and HPLC analysis confirmed the formation of amphiphiles and their purity. Among the amphiphiles, C18-(ADA)(2)-RGD amphiphile exhibited lowest CMC (9.00 ± 1.73 μM) and its micelles had suitable size (194.63 ± 44.86 nm) and zeta potential (0.27 ± 1.96 mV) for targeting. The cellular uptake of the micelles was temperature dependent and the micelles were stable. The IC50 of paclitaxel loaded in micelles decreased 50% in α(v)β(3) integrin overexpressing cells and showed a 4 fold increase in normal cells when compared to free paclitaxel.

CONCLUSION

Amphiphiles of fatty acids-ADA-RGD were synthesized. These amphiphiles formed stable micelles and were effective as targeted delivery carriers to α(v)β(3) integrin overexpressing tumors.