N,N′-Carbonyldiimidazole-mediated functionalization of superparamagnetic nanoparticles as vaccine carrier

Multifunctional magnetic nanoparticles elicit anti-tumor immunity in a mouse melanoma model

Immunotherapy has emerged as a promising strategy to eradicate cancer cells. Particularly, the development of cancer vaccines to induce a potent and sustained antigen-specific T cell response has become a center of attention. Herein, we describe a novel immunotherapy based on magnetic nanoparticles (MNP) covalently modified with the OVA254-267 antigen and a CpG oligonucleotide via disulfide bonds. The MNP-CpG-COVA significantly enhances dendritic cell activation and CD8+ T cell antitumoral response against B16-OVA melanoma cells in vitro. Notably, the immune response induced by the covalently modified MNP is more potent and sustained over time than that triggered by the free components, highlighting the advantage of nanoformulations in immunotherapies. What is more, the nanoparticles are stable in the blood after in vivo administration and induce potent levels of systemic tumor-specific effector CD8 + T cells. Overall, our findings highlight the potential of covalently functionalized MNP to induce robust immune responses against mouse melanoma.

Surface Functionalization Strategies of Polystyrene for the Development Peptide-Based Toxin Recognition

The development of a robust surface functionalization method is indispensable in controlling the efficiency, sensitivity, and stability of a detection system. Polystyrene (PS) has been used as a support material in various biomedical fields. Here, we report various strategies of polystyrene surface functionalization using siloxane derivative, divinyl sulfone, cyanogen bromide, and carbonyl diimidazole for the immobilization of biological recognition elements (peptide developed to detect ochratoxin A) for a binding assay with ochratoxin A (OTA). Our objective is to develop future detection systems that would use polystyrene cuvettes such as immobilization support of biological recognition elements. The goal of this article is to demonstrate the proof of concept of this immobilization support. The results obtained reveal the successful modification of polystyrene surfaces with the coupling agents. Furthermore, the immobilization of biological recognition elements, for the OTA binding assay with horseradish peroxidase conjugated to ochratoxin A (OTA-HRP) also confirms that the characteristics of the functionalized peptide immobilized on polystyrene retains its ability to bind to its ligand. The presented strategies on the functionalization of polystyrene surfaces will offer alternatives to the possibilities of immobilizing biomolecules with excellent order- forming monolayers, due to their robust surface chemistries and validate a proof of concept for the development of highly efficient, sensitive, and stable future biosensors for food or water pollution monitoring.

New and old adjuvants in allergen-specific immunotherapy: With a focus on nanoparticles

Allergic diseases have remarkably increased in recent years. Nowadays, efforts for curing and management of these disorders are an important concern worldwide. Allergen-specific immunotherapy (ASIT) has recently gained more attention as a means for the management of allergic diseases. Adjuvants or helper agents are materials applied for better stimulating and shifting of protective responses, and these belong to an extremely diverse collection of complexes. The main function of adjuvants includes acting as depot foundations, transferring vehicles, and immunostimulators. Immunostimulatory adjuvants have gained increasing attention for ASIT. In this regard, the present study provides a review of old and new adjuvants used in allergen immunotherapy.

Nanoparticles as Carriers of Proteins, Peptides and Other Therapeutic Molecules

Nanoparticles have many applications both in industry and medicine. Depending upon their physical and chemical properties, they can be used as carriers of therapeutic molecules or as therapeutics. Nanoparticles are made of synthetic or natural polymers, lipids or metals. Their use allows for faster transport to the place of action, thus prolonging its presence in the body and limiting side effects. In addition, the use of such a drug delivery system protects the drug from rapid disintegration and elimination from the body. In recent years, the use of proteins and peptides as therapeutic molecules has grown significantly. Unfortunately, proteins are subject to enzymatic digestion and can cause unwanted immune response beyond therapeutic action. The use of drug carriers can minimize undesirable side effects and reduce the dose of medication needed to achieve the therapeutic effect. The current study presents the use of several selected drug delivery systems for the delivery of proteins, peptides and other therapeutic molecules.

A sensitive and disposable indium tin oxide based electrochemical immunosensor for label-free detection of MAGE-1

MAGE-1 (MAGE, for melanoma antigen), was identified by virtue of its processing and cell surface expression as a tumor-specific peptide bound to major histocompatibility complexes which was reactive with autolytic T cells. 3-Glycidoxypropyltrimethoxysilane (3-GOPS) is frequently employed for the preparation of dense heterometal hybrid polymers which are used, e.g., for hard coatings of organic polymers and contact lens materials in the optical industry. In this study, we have improved a new immunological biosensor with indium tin oxide (ITO). Then, Anti-MAGE-1 antibody was covalently immobilized with 3-GOPS which formed a self-assembled monolayers (SAMs) on modified ITO electrodes. Analytical characteristics such as square wave voltammetry, linear determination range, repeatability, reproducibility and regeneration of biosensors are determined. All characterization steps are monitored by electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV). The developed biosensor has wide determination range (0.5fg-15fg/mL). To investigate long shelf life of the fabricated biosensor, the immunosensors were stored at 4°C for periods ten weeks. Futhermore, binding kinetics of MAGE1 to antiMAGE-1 is monitored by single frequency technique in real time. Additionally, Kramer's-Kronig transform was used to understand whether the impedance spectra of biosensor system are affected from the variation that occurred because of external factor. Morphological characteristics of constructed biosensor were observed by scanning electron microscopy. Real human serum samples were also analyzed by the proposed biosensor, successfully. A commercial ELISA kit was also used as a reference method to validate the results obtained by the biosensor. Finally, this biosensor was tried in real blood sample and that showed it could be utilized in clinical applications. This biosensor can be preferred due to it has a wide linear range and it can be prepared easily.

Bacteriophage-based nanoprobes for rapid bacteria separation

The lack of practical methods for bacterial separation remains a hindrance for the low-cost and successful development of rapid detection methods from complex samples. Antibody-tagged magnetic particles are commonly used to pull analytes from a liquid sample. While this method is well-established, improvements in capture efficiencies would result in an increase of the overall detection assay performance. Bacteriophages represent a low-cost and more consistent biorecognition element as compared to antibodies. We have developed nanoscale bacteriophage-tagged magnetic probes, where T7 bacteriophages were bound to magnetic nanoparticles. The nanoprobe allowed the specific recognition and attachment to E. coli cells. The phage magnetic nanprobes were directly compared to antibody-conjugated magnetic nanoprobes. The capture efficiencies of bacteriophages and antibodies on nanoparticles for the separation of E. coli K12 at varying concentrations were determined. The results indicated a similar bacteria capture efficiency between the two nanoprobes.

Inorganic materials as supports for covalent enzyme immobilization: methods and mechanisms

Several inorganic materials are potentially suitable for enzymatic covalent immobilization, by means of several different techniques. Such materials must meet stringent criteria to be suitable as solid matrices: complete insolubility in water, reasonable mechanical strength and chemical resistance under the operational conditions, the capability to form manageable particles with high surface area, reactivity towards derivatizing/functionalizing agents. Non-specific protein adsorption should be always considered when planning covalent immobilization on inorganic solids. A huge mass of experimental work has shown that silica, silicates, borosilicates and aluminosilicates, alumina, titania, and other oxides, are the materials of choice when attempting enzyme immobilizations on inorganic supports. More recently, some forms of elemental carbon, silicon, and certain metals have been also proposed for certain applications. With regard to the derivatization/functionalization techniques, the use of organosilanes through silanization is undoubtedly the most studied and the most applied, although inorganic bridge formation and acylation with selected acyl halides have been deeply studied. In the present article, the most common inorganic supports for covalent immobilization of the enzymes are reviewed, with particular focus on their advantages and disadvantages in terms of enzyme loadings, operational stability, undesired adsorption, and costs. Mechanisms and methods for covalent immobilization are also discussed, focusing on the most widespread activating approaches (such as glutaraldehyde, cyanogen bromide, divinylsulfone, carbodiimides, carbonyldiimidazole, sulfonyl chlorides, chlorocarbonates, N-hydroxysuccinimides).

Magnetite nanostructures as novel strategies for anti-infectious therapy

This review highlights the current situation of antimicrobial resistance and the use of magnetic nanoparticles (MNPs) in developing novel routes for fighting infectious diseases. The most important two directions developed recently are: (i) improved delivery of antimicrobial compounds based on a drastic decrease of the minimal inhibition concentration (MIC) of the drug used independently; and (ii) inhibition of microbial attachment and biofilm development on coated medical surfaces. These new directions represent promising alternatives in the development of new strategies to eradicate and prevent microbial infections that involve resistant and biofilm-embedded bacteria. Recent promising applications of MNPs, as the development of delivery nanocarriers and improved nanovehicles for the therapy of different diseases are discussed, together with the mechanisms of microbial inhibition.

Nanoparticulate adjuvants and delivery systems for allergen immunotherapy

In the last decades, significant progress in research and clinics has been made to offer possible innovative therapeutics for the management of allergic diseases. However, current allergen immunotherapy shows limitations concerning the long-term efficacy and safety due to local side effects and risk of anaphylaxis. Thus, effective and safe vaccines with reduced dose of allergen have been developed using adjuvants. Nevertheless, the use of adjuvants still has several disadvantages, which limits its use in human vaccines. In this context, several novel adjuvants for allergen immunotherapy are currently being investigated and developed. Currently, nanoparticles-based allergen-delivery systems have received much interest as potential adjuvants for allergen immunotherapy. It has been demonstrated that the incorporation of allergens into a delivery system plays an important role in the efficacy of allergy vaccines. Several nanoparticles-based delivery systems have been described, including biodegradable and nondegradable polymeric carriers. Therefore, this paper provides an overview of the current adjuvants used for allergen immunotherapy. Furthermore, nanoparticles-based allergen-delivery systems are focused as a novel and promising strategy for allergy vaccines.