DNA condensation and its thermal stability influenced by phospholipid bilayer and divalent cations

Mimicking a Cellular Crowding Environment for Enzyme-Free Paper-Based Nucleic Acid Tests at the Point of Care

Point of care (PoC) nucleic acid amplification tests (NAATs) are a cornerstone of public health, providing the earliest and most accurate diagnostic method for many communicable diseases in the same location where the patient receives treatment. Communicable diseases, such as human immunodeficiency virus (HIV), disproportionately impact low-resource communities where NAATs are often unobtainable due to the resource-intensive enzymes that drive the tests. Enzyme-free nucleic acid detection methods, such as hybridization chain reaction (HCR), use DNA secondary structures for self-driven amplification schemes, producing large DNA nanostructures, capable of single-molecule detection in cellulo. These thermodynamically driven DNA-based tests have struggled to penetrate the PoC diagnostic field due to their inadequate limits of detection or complex workflows. Here, we present a proof-of-concept NAAT that combines HCR-based amplification of a target nucleic acid sequence with paper-based nucleic acid filtration and enrichment capable of detecting sub-pM levels of synthetic DNA. We reconstruct the favorable hybridization conditions of an in cellulo reaction in vitro by incubating HCR in an evaporating, microvolume environment containing poly(ethylene glycol) as a crowding agent. We demonstrate that the kinetics and thermodynamics of DNA-DNA and DNA-RNA hybridization is enhanced by the dynamic evaporating environment and inclusion of crowding agents, bringing HCR closer to meeting PoC NAAT needs.

Mimicking an in cellulo environment for enzyme-free paper-based nucleic acid tests at the point of care

Point of care (PoC) nucleic acid amplification tests (NAATs) are a cornerstone of public health, providing the earliest and most accurate diagnostic method for many communicable diseases, such as HIV, in the same location the patient receives treatment. Communicable diseases disproportionately impact low-resource communities where NAATs are often unobtainable due to the resource intensive enzymes that drive the tests. Enzyme-free nucleic acid detection methods, such as hybridization chain reaction (HCR), use DNA secondary structures for self-driven amplification schemes producing large DNA nanostructures and capable of single molecule detection in cellulo. These thermodynamically driven DNA-based tests have struggled to penetrate the PoC diagnostic field due to their inadequate limits of detection or complex workflows. Here we present a proof-of-concept NAAT that combines HCR-based amplification of a target nucleic acid sequence with paper-based nucleic acid filtration and enrichment capable of detecting sub pM levels of synthetic DNA. We reconstruct the favorable hybridization conditions of an in cellulo reaction in vitro by incubating HCR in an evaporating, microvolume environment containing poly(ethylene glycol) as a crowding agent. We demonstrate that the kinetics and thermodynamics of DNA-DNA and DNA-RNA hybridization is enhanced by the dynamic evaporating environment and inclusion of crowding agents, bringing HCR closer to meeting PoC NAAT needs.

Protonation-mediated DNA tile self-assembly with nuclease resistance characteristic for signal-amplified detection of microRNAs

DNA nanotechnology, developing rapidly in recent years, has unprecedented superiorities in biological application-oriented research including high programmability, convenient functionalization, reconfigurable structure, and intrinsic biocompatibility. However, the susceptibility to nucleases in the physiological environment has been an obstacle to applying DNA nanostructures in biological science research. In this study, a new DNA self-assembly strategy, mediated by double-protonated small molecules instead of classical metal ions, is developed to enhance the nuclease resistance of DNA nanostructures while retaining their integrality and functionality, and the relative application has been launched in the detection of microRNAs (miRNAs). Faced with low-abundance miRNAs, we integrate hybrid chain reaction (HCR) with DNA self-assembly in the presence of double-protonated small molecules to construct a chemiluminescence detection platform with nuclease resistance, which utilizes the significant difference of molecular weight between DNA arrays and false-positive products to effectively separate of reaction products and remove the detection background. This strategy attaches importance to the nucleic acid stability during the assay process via improving nuclease resistance while rendering the detection results for miRNAs more authentic and reliable, opening our eyes to more possibilities for the multiple applications of customized DNA nanostructures in biology, including bioassay, bioimaging, drug delivery, and cell modulation.

Docking-aided rational tailoring of a fluorescence- and affinity-enhancing aptamer for a label-free ratiometric malachite green point-of-care aptasensor

Although nucleic acid aptasensors are increasingly applied in the detection of environmentally hazardous biomolecules, several formidable challenges remain with this technique because of their vulnerability, high cost and suboptimal sensitivity. Here, a docking-aided rational tailoring (DART) strategy was established at three levels and in two dimensions for the refinement of malachite green (MG) DNA aptamers. Guided by in silico molecular docking, coarse and fine tailoring were conducted at three levels each, to significantly enhance fluorescence activation intensity and binding affinity in two dimensions. Empowered by the results of the rational tailoring, a mechanistic view of the MG DNA aptamer-target interaction was thoroughly analyzed via four types of interactions. To meet the demand for point-of-care testing (POCT), a label-free and ratiometric fluorescent aptasensor was developed leveraging the tailored MG aptamer, based on the binding site competition-equilibrium effect via the introduction of a reference dye. This sensitive, specific, low-cost and rapid aptasensor subsequently demonstrated outstanding detection performance, achieving an ideal signal response range of 5 nmol·L^-1 - 6 μmol·L^-1 and a low limit of detection (LOD) of 1.49 nmol·L^-1. The DART strategy and systematic exploration of the MG DNA luminescent aptamers herein will provide a valuable reference in the field of aptamer tailoring, biosensing and bioimaging. The proposed label-free ratiometric aptasensor also provides a highly generalizable strategy for hazardous biomolecular detection.

Calcium mediated DNA binding in non-lamellar structures formed by DOPG/glycerol monooleate

In order to test an encapsulation method of short fragmented DNA (∼ 20-300 bp), we study the solubilisation in 150 mM solution of NaCl of a cubic phase formed by glycerol monooleate (GMO) with negatively charged dioleoylphosphatidylglycerol (DOPG) up to the level of unilamellar vesicles and, subsequently, the restoration of the cubic phase using Ca²⁺ cations. We performed small angle X-ray and neutron scattering (SAXS and SANS) to follow structural changes in DOPG/GMO mixtures induced by increasing DOPG content. The cubic phase (Pn3m space group) is preserved up to ∼ 11 mol% of DOPG in DOPG/GMO. Above 20 mol%, the SANS curves are typical of unilamellar vesicles. The thickness of the DOPG/GMO lipid bilayer (d_L) decreases slightly with increasing fraction of DOPG. The addition of 15 mM of CaCl₂ solution shields the electrostatic repulsions of DOPG molecules, increases slightly d_L and restores the cubic structures in the mixtures up to ∼ 37 mol% of DOPG. Zeta potential shows negative surface charge. The analysis of the data provides the radius of the water nano-channels of the formed non-lamellar structures. We discuss their dimensions with respect to DNA binding. In addition, Ca²⁺ mediates DNA - DOPG/GMO binding. The formed hexagonal phase, H_II, binds less of DNA in comparison with cubic phases (∼ 6 wt% and ∼ 20 wt% of the total amount, respectively). The studied system can be utilized as anionic Q_II delivery vector for genetic material.

Divalent metal ions and intermolecular interactions facilitate DNA network formation

The interactions between divalent metal ions and DNA are crucial for basic life processes. These interactions are also important in advanced technological products such as DNA-based ion sensors. Current polyelectrolyte theories cannot describe these interactions well and do not consider the corresponding dynamics. In this study, we report the single-molecule dynamics of the binding of divalent metal ions to a single DNA molecule and the morphology characterization of the complex. We found that most of the divalent metal ions (Mn²⁺, Zn²⁺, Co²⁺, Ni²⁺, and Cd²⁺), except Mg²⁺ and Ca²⁺, could cause monomolecular DNA condensation. For transition metal ions, different ionic strengths were required to induce the compaction, and different shortening speeds were displayed in the dynamics, indicating ionic specificity. Atomic force microscopy revealed that the morphologies of the metal ion-DNA complexes were affected by the ionic strength of the metal ion, DNA chain length, and DNA concentration. At low metal ion concentration, DNA tended to adopt a random coil conformation. Increasing the ionic strength led to network-like condensed structures, suggesting that divalent metal ions can induce attraction between DNA molecules. Furthermore, higher DNA concentration and longer chain length enhanced intermolecular interactions and consequently resulted in network structures with a higher degree of interconnectivity.

pH-Sensitive N,N-Dimethylalkane-1-amine N-Oxides in DNA Delivery: From Structure to Transfection Efficiency

pH-sensitive liposomes composed of homologues of series of N,N-dimethylalkane-1-amine N-oxides (CnNO, n = 8-18, where n is the number of carbon atoms in the alkyl substituent) and neutral phospholipid dioleoylphosphatidylethanolamine (DOPE) were prepared at two molar ratios (CnNO/DOPE = 0.4:1 and 1:1) and tested for their in vitro transfection activity. Several techniques (SAXS/WAXS, UV-vis, zeta potential measurements, confocal microscopy) were applied to characterize the system in an effort to unravel the relationship among the transfection efficiency, structure, and composition of the lipoplexes. The transfection efficiency of CnNO/DOPE for plasmid DNA in U2OS cells follows a quasi-parabolic dependence on CnNO's alkyl substituent length with a maximum at n = 16. The transfection efficiency of CnNO/DOPE (n = 12-18) lipoplexes was found to be higher than that of commercially available Lipofectamine 2000. C16NO/DOPE also positively transfected HEK 293T and HeLa cells. Small-angle X-ray scattering (SAXS) shows large structural diversity depending on the complex's composition and pH. Transfection efficiencies mediated by two structures, either a condensed lamellar (L_α^c) or epitaxially connected L_α^c and a condensed inverted hexagonal (H_II^c) phase (L_α^c & H_II^c), were found to be very similar. The change in pH from acidic to neutral induces phase transition L_α^c & H_II^c → Q_II + L_α, with cubic phase Q_II of the Pn3m space group. Q_II detected in lipoplexes of most efficient composition CnNO/DOPE (n = 16 and 18) facilitates DNA release and promotes its internalization in the cell.

Cell-surface-bound circulating DNA in the blood: Biology and clinical application

Cell-surface-bound extracellular DNA (csbDNA) is present on the outer membrane of blood cells, including both red blood cells and leukocytes. Although less well characterized than cell-free DNA (cfDNA) in plasma and serum, leukocyte and red blood cell csbDNA form a considerable fraction of the blood extracellular nucleic acids pool, with typically at least comparable amount of DNA occurring bound to the outer surface of cells as compared with circulating free DNA in plasma. The cellular origin of csbDNA is not clear; however, as with cfDNA, in patients with cancer a proportion is derived from the tumor, thus making it potentially a useful source of DNA for cancer diagnosis, prognosis, and monitoring. © 2019 IUBMB Life, 71(9):1201-1210, 2019.

High density single-molecule-bead arrays for parallel single molecule force spectroscopy

The assembly of a highly parallel force spectroscopy tool requires careful placement of single-molecule targets on the substrate and the deliberate manipulation of a multitude of force probes. Since the probe must approach the target biomolecule for covalent attachment, while avoiding irreversible adhesion to the substrate, the use of polymer microspheres as force probes to create the tethered bead array poses a problem. Therefore, the interactions between the force probe and the surface must be repulsive at very short distances (<5 nm) and attractive at long distances. To achieve this balance, the chemistry of the substrate, force probe, and solution must be tailored to control the probe-surface interactions. In addition to an appropriately designed chemistry, it is necessary to control the surface density of the target molecule in order to ensure that only one molecule is interrogated by a single force probe. We used gold-thiol chemistry to control both the substrate's surface chemistry and the spacing of the studied molecules, through binding of the thiol-terminated DNA and an inert thiol forming a blocking layer. For our single molecule array, we modeled the forces between the probe and the substrate using DLVO theory and measured their magnitude and direction with colloidal probe microscopy. The practicality of each system was tested using a probe binding assay to evaluate the proportion of the beads remaining adhered to the surface after application of force. We have translated the results specific for our system to general guiding principles for preparation of tethered bead arrays and demonstrated the ability of this system to produce a high yield of active force spectroscopy probes in a microwell substrate. This study outlines the characteristics of the chemistry needed to create such a force spectroscopy array.