Cell adhesion control on photoreactive phospholipid polymer surfaces

Control of Cell-Substrate Binding Related to Cell Proliferation Cycle Status Using a Cytocompatible Phospholipid Polymer Bearing Phenylboronic Acid Groups

To provide high-quality cellular raw materials for cell engineering and pharmaceutical engineering, a polymer substrate is prepared for cell separation focusing on the cell proliferation cycle. There are many types of sugar chains on cell membranes, which function as signaling molecules to control interactions with the exterior of the cell; their abundance changes during the cell-proliferation cycle. In this study, a phenylboronic acid group, which has affinity for sugar chains, is introduced into a polymer containing a phosphorylcholine group that does not induce cell activation. On the surface of this polymer, human promyelocytic leukemia cells can adhere. The adhesion rate is increased by pretreating the substrate with an alkaline solution. Moreover, cell adhesion is dependent on the sugar additive in the culture medium. Therefore, cell adhesion is governed by reactions between the sugar chain on the cell membrane and the phenylboronic acid groups on the substrate. It is revealed that the adhesion rate changes depending on the expression level of sugar chains related to the cell-proliferation cycle. Based on this, it may be proposed a cell proliferation cycle-specific separation process using the polymer substrate based on cell adhesion depending on sugar chain density.

SiO2/TiO2 Nanocomposite Films on Polystyrene for Light-Induced Cell Detachment Application

Light-induced cell detachment shows much potential in in vitro cell culture and calls for high-performance light-responsive films. In this study, a smooth and dense SiO₂/TiO₂ nanocomposite thin film with thickness of around 250 nm was first fabricated on H₂O₂ treated polystyrene (PS) substrate via a low-temperature sol-gel method. It was observed that the film could well-adhere on the PS surface and the bonding strength became increasingly high with the increase of SiO₂ content. The peeling strength and shear strength reached 3.05 and 30.02 MPa, respectively. It was observed the surface of the film could transform into superhydrophilic upon 20 min illumination of ultraviolet with a wavelength of 365 nm (UV365). In cell culture, cells, i.e., NIH3T3 and MC3T3-E1 cells, cultured on SiO₂/TiO₂ nanocomposite film were easily detached after 10 min of UV365 illumination; the detachment rates reached 90.8% and 88.6%, respectively. Correspondingly, continuous cell sheets with good viability were also easily obtained through the same way. The present work shows that SiO₂/TiO₂ nanocomposite thin film could be easily prepared on polymeric surface at low temperature. The corresponding film exhibits excellent biocompatibility, high bonding strength, and good light responses. It could be a good candidate for the surface of cell culture utensils with light-induced cell detachment property.

Field responsive materials: photo-, electro-, magnetic- and ultrasound-sensitive polymers

Recent advances in field-responsive polymers, which have emerged as highly promising materials for numerous applications, are highlighted.

Photodegradable hydrogels for capture, detection, and release of live cells

Cells may be captured and released using a photodegradable hydrogel (photogel) functionalized with antibodies. Photogel substrates were used to first isolate human CD4 or CD8 T-cells from a heterogeneous cell suspension and then to release desired cells or groups of cells by UV-induced photodegradation. Flow cytometry analysis of the retrieved cells revealed approximately 95% purity of CD4 and CD8 T-cells, suggesting that this substrate had excellent specificity. To demonstrate the possibility of sorting cells according to their function, photogel substrates that were functionalized with anti-CD4 and anti-TNF-α antibodies were prepared. Single cells captured and stimulated on such substrates were identified by the fluorescence "halo" after immunofluorescent staining and could be retrieved by site-specific exposure to UV light through a microscope objective. Overall, it was demonstrated that functional photodegradable hydrogels enable the capture, analysis, and sorting of live cells.

Fabricating a cycloolefin polymer immunoassay platform with a dual-function polymer brush via a surface-initiated photoiniferter-mediated polymerization strategy

The development of technologies for a biomedical detection platform is critical to meet the global challenges of various disease diagnoses. In this study, an inert cycloolefin polymer (COP) support was modified with two-layer polymer brushes possessing dual functions, i.e., a low fouling poly[poly(ethylene glycol) methacrylate] [p(PEGMA)] bottom layer and a poly(acrylic acid) (PAA) upper layer for antibody loading, via a surface-initiated photoiniferter-mediated polymerization strategy for fluorescence-based immunoassay. It was demonstrated through a confocal laser scanner that, for the as-prepared COP-g-PEG-b-PAA-IgG supports, nonspecific protein adsorption was suppressed, and the resistance to nonspecific protein interference on antigen recognition was significantly improved, relative to the COP-g-PAA-IgG references. This strategy for surface modification of a polymeric platform is also applicable to the fabrication of other biosensors.

Surface modification of cycloolefin polymer via surface-initiated photoiniferter-mediated polymerization for suppressing bioadhesion

Cycloolefin polymer was modified via surface-initiated photoiniferter-mediated polymerization for suppressing bioadhesion.

Air jet spinning of hydroxyapatite/poly(lactic acid) hybrid nanocomposite membrane mats for bone tissue engineering

The technique for the production of multifunctional scaffolds from bioactive ceramics and biodegradable polymers for use in tissue scaffolds remains challenging. Here, the goal was to fabricate 3D nanocomposite nanofiber scaffolds of nanohydroxyapatite/poly(lactic acid) (nHA/PLA) prepared by air jet spinning (AJS) as a novel and facile composite fabrication process. The characteristics of the fabricated 3D scaffolds were investigated using SEM, water contact angle, DSC, FTIR, XRD analyses and tensile tests. The surface morphology exhibited highly interconnected bonded fibers due to the high fabrication rates. It was also found that the nHA particles were effectively embedded in the fibers' surface due to the difference in the kinetic energies between the nHA particles and polymer molecules. The as-received PLA film showed a low crystallinity value of about 19%, which was expected with the casting process. The crystallinities of the plain PLA and nHA/PLA membrane scaffolds were about 31.78% and 32.21%, respectively. This reveals that HA nanoparticles could engage in a beneficial interaction with the PLA chain molecules during the AJS process. The tensile strength of the membrane PLA mats, particularly the hybrid nanocomposite samples with low nHA contents, was considerably improved compared to that of the PLA casted film. Biological in vitro cell cultures of MC3T3-E1 osteoblast-like cells on the fabricated scaffolds were studied for up to seven days. The nanocomposite membrane mats of nHA/PLA, fabricated by AJS, had highly interconnected fibers. This facile technique has a high production rate and is a new concept of potential interest for bone tissue engineering applications.