Headgroup specificity for the interaction of the antimicrobial peptide tritrpticin with phospholipid Langmuir monolayers

Bragg-Williams Theory for Particles with a Size-Modulating Internal Degree of Freedom

The field of soft matter teems with molecules and aggregates of molecules that have internal size-modulating degrees of freedom. Proteins, peptides, microgels, polymers, micelles, and even some colloids can exist in multiple-often just two dominating-states with different effective sizes, where size can refer to the volume or to the cross-sectional area for particles residing on surfaces. The size-dependence of their accessible states renders the behavior of these particles pressure-sensitive. The Bragg-Williams model is among the most simple mean-field methods to translate the presence of inter-particle interactions into an approximate phase diagram. Here, we extend the Bragg-Williams model to account for the presence of particles that are immersed in a solvent and exist in two distinct states, one occupying a smaller and the other one a larger size. The basis of the extension is a lattice-sublattice approximation that we use to host the two size-differing states. Our model includes particle-solvent interactions that act as an effective surface tension between particles and solvent and are ignorant of the state in which the particles reside. We analyze how the energetic preference of the particles for one or the other state affects the phase diagrams. The possibility of a single phase-two phases-single phase sequence of phase transitions as a function of increasing temperature is demonstrated.

Influence of cytochrome P450 3A4 and membrane lipid composition on doxorubicin activity

Drug resistance is known to depend on the interactions with cell membranes and other molecules such as human cytochromes P450 (CYPs) which are anchored on the endoplasmic reticulum (ER) membrane and involved in the metabolism of anticancer drugs. In this study, we determined the influence from cytochrome P450 3A4 (CYP3A4) on the interaction between the drug doxorubicin (DOX) and Langmuir monolayers mimicking cell membranes. The lipid composition was varied by changing the relative concentrations of cholesterol (Chol), 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE), and L-α-phosphatidylinositol (PI). Three compositions were studied in detail which represented a healthy cell membrane and cancerous cell membranes. DOX induced an expansion in the surface pressure isotherms for all monolayers, with stronger effect for the composition of cancerous cell with a high Chol content, thus confirming the relevance of lipid composition. This effect decreased considerably when CYP3A4 was incorporated with the formation of CYP3A4-DOX complexes, according to results from polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) measurements. Taken together, these results support the hypothesis of CYP3A4 being involved in drug resistance, which may be exploited to design strategies to enhance chemotherapy efficacy.

The Past and the Future of Langmuir and Langmuir-Blodgett Films

The Langmuir-Blodgett (LB) technique, through which monolayers are transferred from the air/water interface onto a solid substrate, was the first method to allow for the controlled assembly of organic molecules. With its almost 100 year history, it has been the inspiration for most methods to functionalize surfaces and produce nanocoatings, in addition to serving to explore concepts in molecular electronics and nanoarchitectonics. This paper provides an overview of the history of Langmuir monolayers and LB films, including the potential use in devices and a discussion on why LB films are seldom considered for practical applications today. Emphasis is then given to two areas where these films offer unique opportunities, namely, in mimicking cell membrane models and exploiting nanoarchitectonics concepts to produce sensors, investigate molecular recognitions, and assemble molecular machines. The most promising topics for the short- and long-term prospects of the LB technique are also highlighted.

Study of the Mechanism of the Antimicrobial Activity of Novel Water Soluble Ammonium Quaternary Benzanthrone on Model Membranes

The increasing resistance of many pathogens to most of the common antimicrobials requires the development of new substances with more effective antimicrobial properties. In the present work, we investigated the mechanism of the antimicrobial activity of novel water soluble ammonium quaternary benzanthrone (Compound B) on model membranes, composed of dipalmitoylphosphatidylcholine, 1-palmitoyl-2-oleoylphosphatidylcholine, dipalmitoylphosphatidylglycerol, 1-palmitoyl-2-oleoylphosphatidylglycerol, and dipalmitoylphosphatidylethanolamine (DPPE). The lipids were chosen to represent a model of a bacterial membrane. The changes in surface pressure of the model membranes, before and after the addition of Compound B, were studied by the Langmuir's monolayer method, and the compressional modulus for each monolayer was determined. In addition, the surface morphology of the lipid monolayers before and after injection of Compound B was monitored by Brewster Angle Microscopy. The results showed that Compound B penetrated all the monolayers studied. The most noticeable effects were found with the negatively charged phosphatidylglycerols and with DPPE leading to the conclusion that the electrostatic interactions between the compound and the lipid head groups and the possible formation of hydrogen bonds between the amino group of the ethanolamine and the keto groups in the structure of Compound B are of great importance. In addition, the penetration ability of the benzoquinone with all phospholipids studied was stable even at higher values of the surface pressure, i.e. thicker monolayers, due to the hydrophobic interaction, which plays also an important role for the antimicrobial activity of Compound B.

A comparison of activity, toxicity, and conformation of tritrpticin and two TOAC-labeled analogues. Effects on the mechanism of action

A strategy that has been gaining increased application for the study of the conformation, dynamics, orientation, and physicochemical properties of peptides is labeling with the paramagnetic amino acid TOAC. This approach was used to gain a deeper understanding on the mechanism of action of the antimicrobial peptide tritrpticin (TRP3). TRP3 was labeled with TOAC at the N-terminus (prior to V¹, TOAC⁰-TRP3) or internally (replacing P⁵, TOAC⁵-TRP3). Functional studies showed that labeling led to peptides with higher activity against Gram-positive bacteria and lower hemolytic activity with respect to TRP3. Peptide-induced model membranes permeabilization and ion channel-like activity studies corroborated the functional assays qualitatively, showing higher activity of the peptides against negatively charged membranes, which had the purpose of mimicking bacterial membranes. TOAC presented a greater freedom of motion at the N-terminus than at the internal position, as evinced by EPR spectra. EPR and fluorescence spectra reported on the peptides conformational properties, showing acquisition of a more packed conformation in the presence of the secondary structure-inducing solvent, TFE. CD studies showed that TOAC⁰-TRP3 acquires a conformation similar to that of TRP3, both in aqueous solution and in TFE, while TOAC⁵-TRP3 presents a different conformation in all environments. While the mechanism of action of TRP3 was impacted to some extent by TOAC labeling at the N-terminus, it did change upon replacement of P⁵ by TOAC. The results demonstrated that TOAC-labeling could be used to modulate TRP3 activity and mechanism of action and, more importantly, the critical role of P⁵ for TRP3 pore formation.

Self-Assembly, Antimicrobial Activity, and Membrane Interactions of Arginine-Capped Peptide Bola-Amphiphiles

The self-assembly and antimicrobial activity of two novel arginine-capped bola-amphiphile peptides, namely RA6R and RA9R (R, arginine; A, alanine) are investigated. RA6R does not self-assemble in water due to its high solubility, but RA9R self-assembles above a critical aggregation concentration into ordered nanofibers due to the high hydrophobicity of the A9block. The structure of the RA9R nanofibers is studied by cryogenic transmission electron microscopy (cryo-TEM) and small-angle X-ray scattering (SAXS). Circular dichroism spectroscopy shows that both RA6R and RA9R adopt coil conformations in water at low concentration, but only RA9R adopts a β-sheet conformation at high concentration. SAXS and differential scanning calorimetry are used to study RA6R and RA9R interactions with a mixed lipid membrane that models a bacterial cell wall, consisting of multilamellar 1,2-dipalmitoyl-sn-glycero-3-phosphoglycerol/1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine vesicles. Cytotoxicity studies show that RA6R is more cytocompatible than RA9R. RA6R has enhanced activity against the Gram-negative pathogen P. aeruginosa at a concentration where viability of mammalian cells is retained. RA9R has little antimicrobial activity, independently of concentration. Our results highlight the influence of the interplay between relative charge and hydrophobicity on the self-assembly, cytocompatibility, and bioactivity of peptide bola-amphiphiles.

Colloidal Stability of Positively Charged Dispersions of Styrene and Acrylic Copolymers in the Presence of TiO2 and CaCO3

Increasing antibiotic resistance of several pathogenic microorganisms calls for alternative approaches to prevent spreading of bacterial diseases. We propose to employ for this purpose coatings obtained from positively charged latex dispersions. In this contribution we characterize aqueous mixed dispersions containing TiO2 or CaCO3 and methyl methacrylate-ethyl acrylate or styrene-ethyl acrylate copolymers synthesized using a cationic surfactant, cetyltrimethylammonium bromide as an emulsifier. Particle size, electrokinetic (ζ) potential of the mixed dispersions and the resulting thin films, as well as antimicrobial properties of the latter are described. The TiO2 and CaCO3 dispersions were stabilised with polyethyleneimine (PEI) and optimum pH for the mixed dispersions were chosen on the basis of ζ-potential measurements. For TiO2, the maximum ζ = +35 mV was found at pH 7.5, and for CaCO3, pH was set at 8.2 (ζ = +38 mV), to prevent its dissolution. In most 1:1 mixtures of TiO2 or CaCO3 with the cetyltrimethylammonium bromide (CTAB)-stabilised latex dispersions, two distinct particles populations were observed, corresponding to the bare latex and bare TiO2 or CaCO3 fractions. Films made of the mixed dispersions remained positively charged and showed antimicrobial activity similar or reduced with respect to the bare polymer films.

Antimicrobial dispersions and films from positively charged styrene and acrylic copolymers

Antimicrobial properties of methyl methacrylate - ethyl acrylate and styrene - ethyl acrylate copolymers, both as latexes and after film formation were tested. The polymers were synthesized using a cationic surfactant, cetytrimethylammonium bromide (CTAB) as an emulsifier, in presence of either a cationic or an anionic initiator. The resulting latex particles showed sizes between 50 and 320 nm (larger for the anionic initiator), and ζ-potential between +30 and +70 mV (more positive for the cationic initiator). Dialysis did not change significantly the size distribution and ζ-potential of the latexes, and most of them inhibited growth of Gram-negative (E. coli), Gram-positive (S. aureus, B. subtilis) and yeast (C. albicans). On the other hand, only few compositions were effective against Gram-negative P. aeruginosa. Both completely ("dry") and incompletely ("wet") formed films produced from the respective latexes showed similar, although less pronounced antimicrobial activity pattern. The analysis of streaming potential for the films confirmed that part of the positive surface charge brought by non-covalent binding of CTAB to the polymer chains, is lost during dialysis of the latexes and during rinsing, especially under high-shear flow. From the practical point of view, films with the best mechanical and antimicrobial properties can be achieved using polymers with high proportion of ethyl acrylate, while nature of the co-monomer and initiator do not play crucial roles.

DPPC monolayer response to non-spanning cobalt-cage metallosurfactants: Electrostatic complex formation

A novel series of amphiphilic cobalt-cage derivatives (ACCD), bearing a diaza-crown bridge and varying alkyl chains, facilitate ion transport across biomembrane models via self-aggregation. In this study, compression isotherm analyses and atomic force microscopy (AFM) were used to assess the interactions of these amphiphiles with Langmuir monolayers of dipalmitoylphosphatidylcholine (DPPC) in order to elucidate electrostatic and steric contributions to ion transport. The stability and compressibility of DPPC monolayers are disrupted by ACCD molecules with short (C₁₂) alkyl chains. These top-heavy amphiphiles (large cone angles) create voids at the interface of the hydrophobic/aqueous layer leading to monolayer expansion and packing efficiency of the aliphatic chains is disrupted. Long-tailed analogues (C₁₆, C₁₈) are cohesively integrated into DPPC monolayers due to their smaller cone angles at the interfacial region and increased hydrocarbon compatibility in the hydrophobic region. Thermodynamic data indicate the formation of electrostatic complexes between DPPC and longer-tailed amphiphiles consistent with AFM observations of aggregate structures at the corresponding concentrations.

Structural and Dynamic Insights of the Interaction between Tritrpticin and Micelles: An NMR Study

A large number of antimicrobial peptides (AMPs) acts with high selectivity and specificity through interactions with membrane lipid components. These peptides undergo complex conformational changes in solution; upon binding to an interface, one major conformation is stabilized. Here we describe a study of the interaction between tritrpticin (TRP3), a cathelicidin AMP, and micelles of different chemical composition. The peptide's structure and dynamics were examined using one-dimensional and two-dimensional NMR. Our data showed that the interaction occurred by conformational selection and the peptide acquired similar structures in all systems studied, despite differences in detergent headgroup charge or dipole orientation. Fluorescence and paramagnetic relaxation enhancement experiments showed that the peptide is located in the interface region and is slightly more deeply inserted in 1-myristoyl-2-hydroxy-sn-glycero-3-phospho-1'-rac-glycerol (LMPG, anionic) than in 1-lauroyl-2-hydroxy-sn-glycero-3-phosphocholine (LLPC, zwitterionic) micelles. Moreover, the tilt angle of an assumed helical portion of the peptide is similar in both systems. In previous work we proposed that TRP3 acts by a toroidal pore mechanism. In view of the high hydrophobic core exposure, hydration, and curvature presented by micelles, the conformation of TRP3 in these systems could be related to the peptide's conformation in the toroidal pore.

Negatively Charged Lipids as a Potential Target for New Amphiphilic Aminoglycoside Antibiotics: A BIOPHYSICAL STUDY

Bacterial membranes are highly organized, containing specific microdomains that facilitate distinct protein and lipid assemblies. Evidence suggests that cardiolipin molecules segregate into such microdomains, probably conferring a negative curvature to the inner plasma membrane during membrane fission upon cell division. 3',6-Dinonyl neamine is an amphiphilic aminoglycoside derivative active against Pseudomonas aeruginosa, including strains resistant to colistin. The mechanisms involved at the molecular level were identified using lipid models (large unilamellar vesicles, giant unilamelllar vesicles, and lipid monolayers) that mimic the inner membrane of P. aeruginosa The study demonstrated the interaction of 3',6-dinonyl neamine with cardiolipin and phosphatidylglycerol, two negatively charged lipids from inner bacterial membranes. This interaction induced membrane permeabilization and depolarization. Lateral segregation of cardiolipin and membrane hemifusion would be critical for explaining the effects induced on lipid membranes by amphiphilic aminoglycoside antibiotics. The findings contribute to an improved understanding of how amphiphilic aminoglycoside antibiotics that bind to negatively charged lipids like cardiolipin could be promising antibacterial compounds.

Archetypal tryptophan-rich antimicrobial peptides: properties and applications

Drug-resistant microorganisms ('superbugs') present a serious challenge to the success of antimicrobial treatments. Subsequently, there is a crucial need for novel bio-control agents. Many antimicrobial peptides (AMPs) show a broad-spectrum activity against bacteria, fungi or viruses and are strong candidates to complement or substitute current antimicrobial agents. Some AMPs are also effective against protozoa or cancer cells. The tryptophan (Trp)-rich peptides (TRPs) are a subset of AMPs that display potent antimicrobial activity, credited to the unique biochemical properties of tryptophan that allow it to insert into biological membranes. Further, many Trp-rich AMPs cross bacterial membranes without compromising their integrity and act intracellularly, suggesting interactions with nucleic acids and enzymes. In this work, we overview some archetypal TRPs derived from natural sources, i.e., indolicidin, tritrpticin and lactoferricin, summarising their biochemical properties, structures, antimicrobial activities, mechanistic studies and potential applications.

Hydroxy-tryptophan containing derivatives of tritrpticin: modification of antimicrobial activity and membrane interactions

Tritrpticin is an antimicrobial peptide with a strong microbicidal activity against Gram-positive and Gram-negative bacteria as well as fungi. The 13-residue peptide is essentially symmetrical and possesses a unique cluster of three Trp residues near the center of its amino acid sequence. The mechanism of action of tritrpticin is believed to involve permeabilization of the cytoplasmic membrane of susceptible bacteria. However it has been suggested that intracellular targets may also play a role in its antimicrobial activity. In this work the mechanism of action of several tritrpticin derivatives was studied through substitution of the three Trp residues with 5-hydroxy-tryptophan (5OHW), a naturally occurring non-ribosomal amino acid. Although it is more polar, 5OHW preserves many of the biophysical and biochemical properties of Trp, allowing the use of fluorescence spectroscopy and NMR techniques to study the interaction of the modified peptides with membrane mimetics. Single or triple 5OHW substitution did not have a large effect on the MIC of the parent peptide against Escherichia coli and Bacillus subtilis. However, the mechanism of action was altered by simultaneously replacing all three Trp with 5OHW. Our results suggest that the inner membrane of Gram-negative bacteria did not constitute the main target of this particular tritrpticin derivative. Since the addition of a hydroxyl group to the indole motif of the Trp residue was able to modify the mechanism of action of the peptides, our data confirm the importance of the Trp cluster in tritrpticin. This work also shows that 5OHW constitutes a new probe to modulate the antimicrobial activity and mechanism of action of other Trp-rich antimicrobial peptides.

Integration of surface-active, periodically sequenced peptides into lipid-based microbubbles

The development of microbubbles toward functional, "theranostic" particles requires the incorporation of constituents with high binding specificity and therapeutic efficacy. Integrating peptides or proteins into the shell of lipid-based microbubbles can provide a means to access both receptor-ligand interactions and therapeutic properties. Simultaneously, peptides or proteins can define the characteristic monolayer mechanics of lipid bubbles and eliminate the need for post-bubble generation modification. The ability to engineer peptide sequences de novo that effectively partition into the bubble monolayer remains parametrically daunting. This work contributes to this effort using two simple amphipathic helical peptides that examine the role of local electrostatics and secondary structure. The two periodically sequenced peptides both have three positive charges, but peptide "K-2.5" spaces those charges 2.5 amino acids apart, while peptide "K-6.0" spaces the charges six amino acids apart. Size populations were determined for bubbles containing each peptide species using light scattering, and a quantitative method was developed to clearly define the fraction of peptides binding onto the microbubble monolayer. The impact of both the initial peptide concentration and the zwitterionic:anionic lipid ratio on peptide binding was also evaluated. Our results indicate that the lipid ratio affected only K-6.0 binding, which appears to be an outcome of the greater ensemble average α-helical population of the K-6.0. These findings provide further insights into the role of charge separation on peptide secondary structure, establishing a simple design metric for peptide binding onto microbubble systems.

Effect of structure on the interactions between five natural antimicrobial compounds and phospholipids of bacterial cell membrane on model monolayers

Monolayers composed of bacterial phospholipids were used as model membranes to study interactions of the naturally occurring phenolic compounds 2,5-dihydroxybenzaldehyde and 2-hydroxy-5-methoxybenzaldehyde, and the plant essential oil compounds carvacrol, cinnamaldehyde, and geraniol, previously found to be active against both Gram-positive and Gram-negative pathogenic microorganisms. The lipid monolayers consist of 1,2-dihexadecanoyl-sn-glycero-3-phosphoethanolamine (DPPE), 1,2-dihexa- decanoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DPPG), and 1,1',2,2'-tetratetradecanoyl cardiolipin (cardiolipin). Surface pressure–area (π-A) and surface potential–area (Δψ-A) isotherms were measured to monitor changes in the thermodynamic and physical properties of the lipid monolayers. Results of the study indicated that the five compounds modified the three lipid monolayer structures by integrating into the monolayer, forming aggregates of antimicrobial –lipid complexes, reducing the packing effectiveness of the lipids, increasing the membrane fluidity, and altering the total dipole moment in the monolayer membrane model. The interactions of the five antimicrobial compounds with bacterial phospholipids depended on both the structure of the antimicrobials and the composition of the monolayers. The observed experimental results provide insight into the mechanism of the molecular interactions between naturally-occurring antimicrobial compounds and phospholipids of the bacterial cell membrane that govern activities.

The role of spontaneous lipid curvature in the interaction of interfacially active peptides with membranes

Research on antimicrobial peptides is in part driven by urgent medical needs such as the steady increase in pathogens being resistant to antibiotics. Despite the wealth of information compelling structure-function relationships are still scarce and thus the interfacial activity model has been proposed to bridge this gap. This model also applies to other interfacially active (membrane active) peptides such as cytolytic, cell penetrating or antitumor peptides. One parameter that is strongly linked to interfacial activity is the spontaneous lipid curvature, which is experimentally directly accessible. We discuss different parameters such as H-bonding, electrostatic repulsion, changes in monolayer surface area and lateral pressure that affect induction of membrane curvature, but also vice versa how membrane curvature triggers peptide response. In addition, the impact of membrane lipid composition on the formation of curved membrane structures and its relevance for diverse mode of action of interfacially active peptides and in turn biological activity are described. This article is part of a Special Issue entitled: Interfacially Active Peptides and Proteins. Guest Editors: William C. Wimley and Kalina Hristova.