Synthesis of poly(ɛ-caprolactone) nanospheres in the presence of the protective agent poly(glutamic acid) and their cytotoxicity, genotoxicity and ability to induce oxidative stress in HepG2 cells

A Review of Recent Developments in Biopolymer Nano-Based Drug Delivery Systems with Antioxidative Properties: Insights into the Last Five Years

In recent years, biopolymer-based nano-drug delivery systems with antioxidative properties have gained significant attention in the field of pharmaceutical research. These systems offer promising strategies for targeted and controlled drug delivery while also providing antioxidant effects that can mitigate oxidative stress-related diseases. Generally, the healthcare landscape is constantly evolving, necessitating the continual development of innovative therapeutic approaches and drug delivery systems (DDSs). DDSs play a pivotal role in enhancing treatment efficacy, minimizing adverse effects, and optimizing patient compliance. Among these, nanotechnology-driven delivery approaches have garnered significant attention due to their unique properties, such as improved solubility, controlled release, and targeted delivery. Nanomaterials, including nanoparticles, nanocapsules, nanotubes, etc., offer versatile platforms for drug delivery and tissue engineering applications. Additionally, biopolymer-based DDSs hold immense promise, leveraging natural or synthetic biopolymers to encapsulate drugs and enable targeted and controlled release. These systems offer numerous advantages, including biocompatibility, biodegradability, and low immunogenicity. The utilization of polysaccharides, polynucleotides, proteins, and polyesters as biopolymer matrices further enhances the versatility and applicability of DDSs. Moreover, substances with antioxidative properties have emerged as key players in combating oxidative stress-related diseases, offering protection against cellular damage and chronic illnesses. The development of biopolymer-based nanoformulations with antioxidative properties represents a burgeoning research area, with a substantial increase in publications in recent years. This review provides a comprehensive overview of the recent developments within this area over the past five years. It discusses various biopolymer materials, fabrication techniques, stabilizers, factors influencing degradation, and drug release. Additionally, it highlights emerging trends, challenges, and prospects in this rapidly evolving field.

Cytotoxic screening and antibacterial activity of Withaferin A

Cancer and bacterial infections are among the leading causes of death worldwide. Plant-derived bioactive compounds constitute promising alternatives for development of new therapeutics. This study aimed at evaluating the biological activity of Withaferin A using 6 tumor cell lines: A549 (lung cancer), U87MG (glioblastoma), SH-SY5Y (neuroblastoma), B16-F10 (mouse melanoma), HeLa (uterine colon cancer) and K562 (chronic myeloid leukemia). In addition, 17 other standard bacterial strains and several multidrug resistant bacteria (MDR) clinical isolates were examined. Cell viability was assessed using the following assays: MTT, neutral red, and dsDNA PicoGreen®. Further, oxidative stress was measured by quantification of reactive oxygen species (ROS) production. The activity against bacteria was determined by the minimum inhibitory concentration (MIC), minimum bacterial concentration (CBM) and antibiofilm activity in the production of strains. Withaferin A was effective, as evidenced by its cytotoxic activity in tumor cell lines, enhanced ROS production in tumor cells and bactericidal and antibiofilm activity. Data demonstrated that Withaferin A may be therapeutically considered as an antitumor and antibacterial agent.

Insights into the toxicity of biomaterials microparticles with a combination of cellular and oxidative biomarkers

Considering that the extensive biomedical, pharmaceutics, cosmetic and other industrial applications of biomaterials (BMs) is of great concern nowadays, regarding their environmental risk, the present study aimed to investigate the effects of four BMs, poly(ε-caprolactone) (PCL), poly(butylene succinate) (PBSu), chitosan (CS) and modified chitosan (succinic acid grafted chitosan) (CS-Suc) in the form of microplastics (particle sizes less than 1 mm) on biochemical parameters of snails Cornu aspersum hemocytes. Due to the absence of knowledge about the environmentally relevant concentrations of BMs, snails were initially treated through their food with a wide range of nominal concentrations of each BM to define the half maximal effective concentration (NRRT₅₀), according to the destabilization degree of hemocytes' lysosomal membranes (by mean of neutral red retention time/NRRT assay). Thereafter, snails were treated with each BM, at concentrations lower than the estimated NRRT₅₀ values in all cases, for periods up to 15 days. After the end of the exposure period, a battery of stress indices were measured in hemocytes of challenged snails. According to the results, all parameters tested in BMs-treated snails statistically differed from those measured in BMs-free snails, thus indicating the pro-oxidant potential of BMs, as well as their ability to affect animals' physiology. The most considerable effect in most cases seems to be caused by modified chitosan and PCL, while chitosan appears to be the least toxic. A common response mechanism of snails' blood cells against the 4 BMs used in the present study was shown. After exposure to each of the studied BMs a significant augmentation in protein carbonyls, MDA equivalents and DNA damage, while a significant reduction in NRRT values was determined in the snails hemocytes, in relation to the unexposed animals. From the biochemical parameters examined, MDA equivalents and DNA damage seem to be more susceptible than the other parameters studied, to respond to BMs effect, with MDA to react with more sensitivity to PCL and CS, while DNA damage to CS-Suc and PBSu. Our results could suggest the simultaneous use of the latter biomarkers in biomonitoring studies of terrestrial ecosystems against the specific BMs.

Nanocapsules Containing Neem (Azadirachta Indica) Oil: Development, Characterization, And Toxicity Evaluation

In this study, we prepared, characterized, and performed toxicity analyses of poly(ε-caprolactone) nanocapsules loaded with neem oil. Three formulations were prepared by the emulsion/solvent evaporation method. The nanocapsules showed a mean size distribution around 400 nm, with polydispersity below 0.2 and were stable for 120 days. Cytotoxicity and genotoxicity results showed an increase in toxicity of the oleic acid + neem formulations according to the amount of oleic acid used. The minimum inhibitory concentrations demonstrated that all the formulations containing neem oil were active. The nanocapsules containing neem oil did not affect the soil microbiota during 300 days of exposure compared to the control. Phytotoxicity studies indicated that NC_20 (200 mg of neem oil) did not affect the net photosynthesis and stomatal conductance of maize plants, whereas use of NC_10 (100:100 of neem:oleic acid) and NC_15 (150:50 of neem:oleic acid) led to negative effects on these physiological parameters. Hence, the use of oleic acid as a complement in the nanocapsules was not a good strategy, since the nanocapsules that only contained neem oil showed lower toxicity. These results demonstrate that evaluation of the toxicity of nanopesticides is essential for the development of environmentally friendly formulations intended for applications in agriculture.

Rheological evaluations and in vitro studies of injectable bioactive glass-polycaprolactone-sodium alginate composites

Composite pastes composed of various amounts of melt-derived bioactive glass 52S4 (MG5) and polycaprolactone (PCL) microspheres in sodium alginate solution were prepared. Rheological properties in both rotatory and oscillatory modes were evaluated. Injectability was measured as injection force versus piston displacement. In vitro calcium phosphate precipitation was also studied in simulated body fluid (SBF) and tracked using scanning electron microscopy, X-ray diffraction and FTIR analyses. All composite pastes were thixotropic in nature and exhibited shear thinning behavior. The magnitude of thixotropy decreased by adding 10-30 wt% PCL, while further amounts of PCL increased it again. Moreover, the composites were viscoelastic materials in which the elastic modulus was higher than viscous term. The pastes which were just made of MG5 or PCL had poor injectability, whereas the composites containing both of these constituents exhibited reasonable injectability. All pastes revealed adequate structural stability in contact with SBF solution. In vitro calcium phosphate precipitation was well observed on the paste made of MG5 and somewhat on the pastes with 10-40 wt% PCL, however the precipitated layer was amorphous in nature. Overall, the produced composites may be appropriate as injectable biomaterials for non-invasive surgeries but more biological evaluations are essential.

45S5Bioglass®-based scaffolds coated with selenium nanoparticles or with poly(lactide-co-glycolide)/selenium particles: Processing, evaluation and antibacterial activity

In the bone tissue engineering field, there is a growing interest in the application of bioactive glass scaffolds (45S5Bioglass(®)) due to their bone bonding ability, osteoconductivity and osteoinductivity. However, such scaffolds still lack some of the required functionalities to enable the successful formation of new bone, e.g. effective antibacterial properties. A large number of studies suggest that selenium (Se) has significant role in antioxidant protection, enhanced immune surveillance and modulation of cell proliferation. Selenium nanoparticles (SeNp) have also been reported to possess antibacterial as well as antiviral activities. In this investigation, uniform, stable, amorphous SeNp have been synthesized and additionally immobilized within spherical PLGA particles (PLGA/SeNp). These particles were used to coat bioactive glass-based scaffolds synthesized by the foam replica method. Samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and transmission electron microscopy (TEM). SeNp, 45S5Bioglass(®)/SeNp and 45S5Bioglass(®)/PLGA/SeNp showed a considerable antibacterial activity against Gram positive bacteria, Staphylococcus aureus and Staphylococcus epidermidis, one of the main causative agents of orthopedic infections. The functionalized Se-coated bioactive glass scaffolds represent a new family of bioactive, antibacterial scaffolds for bone tissue engineering applications.

Functionalization of alkyne-terminated thermally hydrocarbonized porous silicon nanoparticles with targeting peptides and antifouling polymers: effect on the human plasma protein adsorption

Porous silicon (PSi) nanomaterials combine a high drug loading capacity and tunable surface chemistry with various surface modifications to meet the requirements for biomedical applications. In this work, alkyne-terminated thermally hydrocarbonized porous silicon (THCPSi) nanoparticles were fabricated and postmodified using five bioactive molecules (targeting peptides and antifouling polymers) via a single-step click chemistry to modulate the bioactivity of the THCPSi nanoparticles, such as enhancing the cellular uptake and reducing the plasma protein association. The size of the nanoparticles after modification was increased from 176 to 180-220 nm. Dextran 40 kDa modified THCPSi nanoparticles showed the highest stability in aqueous buffer. Both peptide- and polymer-functionalized THCPSi nanoparticles showed an extensive cellular uptake which was dependent on the functionalized moieties presented on the surface of the nanoparticles. The plasma protein adsorption study showed that the surface modification with different peptides or polymers induced different protein association profiles. Dextran 40 kDa functionalized THCPSi nanoparticles presented the least protein association. Overall, these results demonstrate that the "click" conjugation of the biomolecules onto the alkyne-terminated THCPSi nanoparticles is a versatile and simple approach to modulate the surface chemistry, which has high potential for biomedical applications.