A quantitative study of MC3T3-E1 cell adhesion, morphology and biomechanics on chitosan-collagen blend films at single cell level

Assembly of Helical Nanostructures: Solvent-Induced Morphology Transition and Its Effect on Cell Adhesion

Being able to precisely manipulate both the morphology and chiroptical signals of supramolecular assemblies will help to better understand the natural biological self-assembly mechanism. Two simple l/d-phenylalanine-based derivatives (L/DPFM) have been designed, and their solvent-dependent morphology evolutions are illustrated. It was found that, as the content of H₂ O in aqueous ethanol solutions was increased, LPFM self-assembles first into right-handed nanofibers, then flat fibrous structures, and finally inversed left-handed nanofibers. Assemblies in ethanol and H₂ O exhibit opposite conformations and circular dichroism (CD) signals even though they are constructed from the same molecules. Thus, the morphology-dependent cell adhesion and proliferation behaviors are further characterized. Left-handed nanofibers are found to be more favorable for cell adhesion than right-handed nanostructures. Quantitative AFM analysis showed that the L929 cell adhesion force on left-handed LPFM fibers is much higher than that on structures with inversed handedness. Moreover, the value of cell Young's modulus is lower for left-handed nanofibrous films, which indicates better flexibility. The difference in cell-substrate interactions might lead to different effects on cell behavior.

Adhesive and biodegradable membranes made of sustainable catechol-functionalized marine collagen and chitosan

We describe bioadhesive membranes developed from marine renewable biomaterials, namely chitosan and collagen extracted from fish skins. Collagen was functionalized with catechol groups (Coll-Cat) to provide the membranes with superior adhesive properties in a wet environment and blended with chitosan to improve the mechanical properties. The blended membranes were compared to chitosan and chitosan blended with unmodified collagen in terms of surface morphology, wettability, weight loss, water uptake, mechanical and adhesive properties. The metabolic activity, the viability and the morphology of L929 fibroblastic cells seeded on these membranes were also assessed. Our results show that the functionalization with catechol groups improves the adhesive and mechanical properties of the membranes and enhances cell attachment and proliferation. These data suggest that the developed marine origin-raw membranes present a potential towards the restoration of the structural and functional properties of damaged soft tissues.

Biomimetic Silk Fibroin Hydrogels Strengthened by Silica Nanoparticles Distributed Nanofibers Facilitate Bone Repair

Various materials are utilized as artificial substitutes for bone repair. In this study, a silk fibroin (SF) hydrogel reinforced by short silica nanoparticles (SiNPs)-distributed-silk fibroin nanofibers (SiNPs@NFs), which exhibits a superior osteoinductive property, is fabricated for treating bone defects. SF acts as the base part of the composite scaffold to mimic the extracellular matrix (ECM), which is the organic component of a native bone. The distribution of SiNPs clusters within the composite hydrogel partially mimics the distribution of mineral crystals within the ECM. Incorporation of SiNPs@NFs enhances the mechanical properties of the composite hydrogel. In addition, the composite hydrogel provides a biocompatible microenvironment for cell adhesion, proliferation, and osteogenic differentiation in vitro. In vivo studies confirm that the successful repair is achieved with the formation of a large amount of new bone in the large-sized cranial defects that are treated with the composite hydrogel. In conclusion, the SiNPs@NFs-reinforced-hydrogel fabricated in this study has the potential for use in bone tissue engineering.

Blended Natural Support Materials-Collagen Based Hydrogels Used in Biomedicine

Due to their unique properties-the are biocompatible, easily accessible, and inexpensive with programmable properties-biopolymers are used in pharmaceutical and biomedical research, as well as in cosmetics and food. Collagen is one of the most-used biomaterials in biomedicine, being the most abundant protein in animals with a triple helices structure, biocompatible, biomimetic, biodegradable, and hemostatic. Its disadvantages are its poor mechanical and thermal properties and enzymatic degradation. In order to solve this problem and to use its benefits, collagen can be used blended with other biomaterials such as alginate, chitosan, and cellulose. The purpose of this review article is to offer a brief paper with updated information on blended collagen-based formulations and their potential application in biomedicine.

Indenting soft samples (hydrogels and cells) with cantilevers possessing various shapes of probing tip

The identification of cancer-related changes in cells and tissues based on the measurements of elastic properties using atomic force microscopy (AFM) seems to be approaching clinical application. Several limiting aspects have already been discussed; however, still, no data have shown how specific AFM probe geometries are related to the biomechanical evaluation of cancer cells. Here, we analyze and compare the nanomechanical results of mechanically homogenous polyacrylamide gels and heterogeneous bladder cancer cells measured using AFM probes of various tip geometry, including symmetric and non-symmetric pyramids and a sphere. Our observations show large modulus variability aligned with both types of AFM probes used and with the internal structure of the cells. Altogether, these results demonstrate that it is possible to differentiate between compliant and rigid samples of kPa elasticity; however, simultaneously, they highlight the strong need for standardized protocols for AFM-based elasticity measurements if applied in clinical practice including the use of a single type of AFM cantilever.

The osteogenesis performance of titanium modified via plasma-enhanced chemical vapor deposition: in vitro and in vivo studies

Titanium (Ti) and its alloys are widely used in dental implants due to their favorable mechanical properties and biocompatibility. Surface characteristics, including physical and chemical properties, are crucial factors to enhance the osteogenesis performance of Ti. The aim of this study is to evaluate amino group surface modification to facilitate the osteogenic potential and bone repair of dental implants both in vitro and in vivo. Herein, amino group-modified Ti surfaces were constructed via the plasma-enhanced chemical vapor deposition (PECVD) technique with an allylamine monomer. The adhesion, proliferation, alkaline phosphate activity and osteogenesis-related genetic expression of MG-63 cells on the surfaces were performed in vitro and presented a significant increase in amino group-modified Ti compared with that in Ti. The in vivo study in miniature pigs was evaluated through micro-computed tomography analysis and histological evaluation, which exhibited enhanced new bone formation in amino group-modified Ti compared with that in Ti after implantation for 4, 8 and 12 weeks. Consequently, amino group surface modification with the PECVD technique may provide a promising modification method to enhance the osteogenesis performance of Ti implants.

Preparation and bioactivity of acetylated konjac glucomannan fibrous membrane and its application for wound dressing

Biomaterial-host interactions significantly affect tissue repair, which is modulated by macrophages. In this study, a polysaccharide, konjac glucomannan (KGM), was acetylated with different degrees of substitution (DS), and the acetylated KGM (AceKGM)-based fibrous membrane was designed to modulate the activity of macrophages for accelerating wound healing. AceKGM was biocompatible and easily dissolved in organic solvents. The adhesion force between Raw264.7 cells and the AceKGM substrate was quantitatively detected by atomic force microscopy (AFM). The enzyme-linked immunosorbent assay (ELISA) results showed that the AceKGM fibrous membrane enhanced macrophage expression of anti-inflammatory and pro-regenerative cytokines, and the DS of AceKGM significantly affected membrane bioactivity. The full-thickness mouse skin wound repair experiments indicated that the AceKGM-containing fibrous membranes significantly accelerated wound healing by promoting re-epithelialization, tissue remodeling, and collagen deposition. In summary, AceKGM-based fibrous membranes have potential as bioactive scaffolds for wound regeneration.

Positive modulation of osteogenesis on a titanium oxide surface incorporating strontium oxide: An in vitro and in vivo study

Surface chemistry and topography can determinatively affect the osseointegration of dental implants. Strontium (Sr) has a significant effect on the promotion of bone formation and inhibitation of bone resorption. The emphasis of this study lies on the evaluation of a new surface treatment that aims to improve the early osseointegration of dental implantation both in vitro and in vivo. A hydrothermal method was used to prepare an SrTiO₃ incorporation on sandblasted large-grit double acid-etched (SLA) titanium surfaces in SrCl₂ solution. The composition and morphology of the SrTiO₃ doped surface were analyzed by X-ray diffraction, X-ray photoelectron spectroscopy，and scanning electron microscopy. In addition, the external release figure of Sr was examined by inductively coupled plasma mass spectrometry. The proliferation, adhesion and differentiation of MC3T3-E1 cells on this surface were evaluated in vitro and presented a significant increase in SLA-Sr group compared with that in SLA group. An in vivo study in 24 New Zealand rabbits indicated a remarkable growth in the volume of direct bone-to-implant contact and peri-implant bone in SLA-Sr group, which were compared with SLA group after 3 and 6 weeks, and removal torque tests exhibited a higher torque removal value of SLA-Sr implants. The study gave the result that the biological effect of SLA-Sr implants was significantly superior to that of the SLA implants at the early stage of osseointegration.

The mechanism of a chitosan-collagen composite film used as biomaterial support for MC3T3-E1 cell differentiation

Natural composite biomaterials are good structural supports for bone cells to regenerate lost bone. Here, we report that a chitosan-collagen composite film accelerated osteoblast proliferation, differentiation and matrix mineralization in MC3T3-E1 cells. Intriguingly, we observed that the film enhanced the phosphorylation of Erk1/2. We showed that the chitosan-collagen composite film increased the transcriptional activity of Runx2, which is an important factor regulating osteoblast differentiation downstream of phosphorylated Erk1/2. Consistent with this observation, we found that the chitosan-collagen composite film increased the expression of osteoblastic marker genes, including Type I Collagen and Runx2 in MC3T3-E1 cells. We conclude that this film promoted osteoblast differentiation and matrix mineralization through an Erk1/2-activated Runx2 pathway. Our findings provide new evidence that chitosan-collagen composites are promising biomaterials for bone tissue engineering in bone defect-related diseases.

Self-assembly of dual drug-delivery coating for synergistic bone regeneration

Bone regeneration for the treatment of bone diseases represents a major clinical need.

Chitosan-Coated Collagen Membranes Promote Chondrocyte Adhesion, Growth, and Interleukin-6 Secretion

Designing scaffolds made from natural polymers may be highly attractive for tissue engineering strategies. We sought to produce and characterize chitosan-coated collagen membranes and to assess their efficacy in promoting chondrocyte adhesion, growth, and cytokine secretion. Porous collagen membranes were placed in chitosan solutions then crosslinked with glutaraldehyde vapor. Fourier transform infrared (FTIR) analyses showed elevated absorption at 1655 cm-1 of the carbon-nitrogen (N=C) bonds formed by the reaction between the (NH₂) of the chitosan and the (C=O) of the glutaraldehyde. A significant peak in the amide II region revealed a significant deacetylation of the chitosan. Scanning electron microscopy (SEM) images of the chitosan-coated membranes exhibited surface variations, with pore size ranging from 20 to 50 µm. X-ray photoelectron spectroscopy (XPS) revealed a decreased C-C groups and an increased C-N/C-O groups due to the reaction between the carbon from the collagen and the NH2 from the chitosan. Increased rigidity of these membranes was also observed when comparing the chitosan-coated and uncoated membranes at dried conditions. However, under wet conditions, the chitosan coated collagen membranes showed lower rigidity as compared to dried conditions. Of great interest, the glutaraldehyde-crosslinked chitosan-coated collagen membranes promoted chondrocyte adhesion, growth, and interleukin (IL)-6 secretion. Overall results confirm the feasibility of using designed chitosan-coated collagen membranes in future applications, such as cartilage repair.