The calorimetric properties of liposomes determine the morphology of dried droplets

Biophysical investigation of liposome systems decorated with bioconjugated copolymers in the presence of amantadine

Liposome-based technologies derived from lipids and polymers (e.g., PEGylated liposomes) have been recognized because of their applications in nanomedicine. However, since such systems represent myriad challenges and may promote immune responses, investigation of new biomaterials is mandatory. Here, we report on a biophysical investigation of liposomes decorated with bioconjugated copolymers in the presence (or absence) of amantadine (an antiviral medication). First, copolymers of poly(N,N-dimethylacrylamide-co-fluoresceinacrylate-co-acrylic acid-N-succinimide ester)-block-poly(N-isopropylacrylamide) (PDMA-b-PNIPAM) containing a fluorescence label were biofunctionalized with short peptides that resemble the sequence of the loops 220 and 130 of the binding receptor of the hemagglutinin (HA) protein of the influenza A virus. Then, the bioconjugated copolymers were self-assembled along with liposomes composed of 1,2 dimyristoyl-sn-glycero-3-phosphocholine, sphingomyelin, and cholesterol (MSC). These biohybrid systems, with and without amantadine, were systematically characterized using differential scanning calorimetry (DSC), dynamic light scattering (DLS), and cryogenic transmission electron microscopy (cryoTEM). Finally, the systems were tested in an in vitro study to evaluate cytotoxicity and direct immunofluorescence in Madin Darbin Canine Kidney (MDCK) cells. The biohybrid systems displayed long-term stability, thermo-responsiveness, hydrophilic-hydrophobic features, and fluorescence properties and were presumable endowed with cell targeting properties intrinsically integrated into the amino acid sequences of the utilized peptides, which indeed turn them into promising nanodevices for biomedical applications.

Drying of bio-colloidal sessile droplets: Advances, applications, and perspectives

Drying of biologically-relevant sessile droplets, including passive systems such as DNA, proteins, plasma, and blood, as well as active microbial systems comprising bacterial and algal dispersions, has garnered considerable attention over the last decades. Distinct morphological patterns emerge when bio-colloids undergo evaporative drying, with significant potential in a wide range of biomedical applications, spanning bio-sensing, medical diagnostics, drug delivery, and antimicrobial resistance. Consequently, the prospects of novel and thrifty bio-medical toolkits based on drying bio-colloids have driven tremendous progress in the science of morphological patterns and advanced quantitative image-based analysis. This review presents a comprehensive overview of bio-colloidal droplets drying on solid substrates, focusing on the experimental progress during the last ten years. We provide a summary of the physical and material properties of relevant bio-colloids and link their native composition (constituent particles, solvent, and concentrations) to the patterns emerging due to drying. We specifically examined the drying patterns generated by passive bio-colloids (e.g., DNA, globular, fibrous, composite proteins, plasma, serum, blood, urine, tears, and saliva). This article highlights how the emerging morphological patterns are influenced by the nature of the biological entities and the solvent, micro- and global environmental conditions (temperature and relative humidity), and substrate attributes like wettability. Crucially, correlations between emergent patterns and the initial droplet compositions enable the detection of potential clinical abnormalities when compared with the patterns of drying droplets of healthy control samples, offering a blueprint for the diagnosis of the type and stage of a specific disease (or disorder). Recent experimental investigations of pattern formation in the bio-mimetic and salivary drying droplets in the context of COVID-19 are also presented. We further summarized the role of biologically active agents in the drying process, including bacteria, algae, spermatozoa, and nematodes, and discussed the coupling between self-propulsion and hydrodynamics during the drying process. We wrap up the review by highlighting the role of cross-scale in situ experimental techniques for quantifying sub-micron to micro-scale features and the critical role of cross-disciplinary approaches (e.g., experimental and image processing techniques with machine learning algorithms) to quantify and predict the drying-induced features. We conclude the review with a perspective on the next generation of research and applications based on drying droplets, ultimately enabling innovative solutions and quantitative tools to investigate this exciting interface of physics, biology, data sciences, and machine learning.

Fluidized or not fluidized? Biophysical characterization of biohybrid lipid/protein/polymer liposomes and their interaction with tetracaine

BACKGROUND

Nanomedicine and the pharmaceutical industry demand the investigation of new biomaterials to improve drug therapies. Combinations of lipids, proteins, and polymers represent innovative platforms for drug delivery. However, little is known about the interactions between such compounds and this knowledge is key to prepare successful drug delivery systems.

METHODS

Biophysical properties of biohybrid vesicles (BhVs) composed of phospholipids, proteins, and amphiphilic block copolymers, assembled without using organic solvents, were investigated by differential scanning calorimetry and dynamic light scattering. We studied four biohybrid systems; two of them included the effect of incorporating tetracaine. Thermal changes of phospholipids and proteins when interacting with the amphiphilic block copolymers and tetracaine were analyzed.

RESULTS

Lysozyme and the copolymers adsorb onto the lipid bilayer modifying the phase transition temperature, enthalpy change, and cooperativity. Dynamic light scattering investigations revealed relevant changes in the size and zeta potential of the BhVs. Interestingly, tetracaine, a membrane-active drug, can fluidize or rigidize BhVs.

CONCLUSIONS

We conclude that positively charged regions of lysozyme are necessary to incorporate the block copolymer chains into the lipid membrane, turning the bilayer into a more rigid system. Electrostatic properties and the hydrophilic-lipophilic balance are determinant for the stability of biohybrid membranes.

GENERAL SIGNIFICANCE

This investigation provides fundamental information associated with the performance of biohybrid drug delivery systems and can be of practical significance for designing more efficient drug nanocarriers.

Patterns in Dried Droplets to Detect Unfolded BSA

The morphological analysis of patterns in dried droplets has allowed the generation of efficient techniques for the detection of molecules of medical interest. However, the effectiveness of this method to reveal the coexistence of macromolecules of the same species, but different conformational states, is still unknown. To address this problem, we present an experimental study on pattern formation in dried droplets of bovine serum albumin (BSA), in folded and unfolded conformational states, in saline solution (NaCl). Folded proteins produce a well-defined coffee ring and crystal patterns all over the dry droplet. Depending on the NaCl concentration, the crystals can be small, large, elongated, entangled, or dense. Optical microscopy reveals that the relative concentration of unfolded proteins determines the morphological characteristics of deposits. At a low relative concentration of unfolded proteins (above 2%), small amorphous aggregates emerge in the deposits, while at high concentrations (above 16%), the "eye-like pattern", a large aggregate surrounded by a uniform coating, is produced. The radial intensity profile, the mean pixel intensity, and the entropy make it possible to characterize the patterns in dried droplets. We prove that it is possible to achieve 100% accuracy in identifying 4% of unfolded BSA contained in a protein solution.

Texture Analysis of Dried Droplets for the Quality Control of Medicines

The quality control of medicines guarantees the effectiveness of treatments for diseases. We explore the use of texture analysis of patterns in dried droplets as a tool to readily detect both impurities and changes in drug concentration. Four types of medicines associated with different routes of administration were analyzed: Methotrexate, Ciprofloxacin, Clonazepam, and Budesonide. We use NaCl and a hot substrate at 63 ∘C to promote aggregate formation and to reduce droplet drying time. Depending on the medicine, optical microscopy reveals different complex aggregates such as circular to oval splatters, fern-like islands, crown shapes, crown needle-like and bump-like patterns as well as dendritic branched and star-like crystals. We use some physical features of the stains (as the stain diameter and superficial area) and gray level co-occurrence matrix (GLCM) to characterize patterns of dried droplets. Finally, we show that structural analysis of stains can achieve 95% accuracy in identifying medicines with 30% water dilution, while it achieves 99% accuracy in detecting drugs with 10% other substances.

Effects of substrate temperature on patterns produced by dried droplets of proteins

Rapid diagnosis provides better clinical management of patients, helps control possible outbreaks, and increases survival. The study of deposits produced by the evaporation of droplets is a useful tool in the diagnosis of some health problems. With the aim to improve diagnostic time in clinical practice where we use the evaporation of droplets, we explored the effects of substrate temperature on pattern formation of dried droplets in globular protein solutions. Three deposit groups were observed: "functional" patterns (from 25 to 37 ^∘C), "transition" patterns (from 44 to 50 ^∘C), and "eye" patterns (from 58 to 63 ^∘C). The dried droplets of the first two groups show a ring structure ("coffee-ring") that confines a great diversity of aggregates such as needle-like structures, tiny blade-shape crystals, highly symmetrical crystallization patterns, and amorphous salt aggregates. In contrast, the "eye" patterns are deposits with a large inner aggregate surrounded by a coffee ring, and they can appear from the evaporation of droplets in protein binary mixtures and blood serum. Interestingly, the unfolding proteins correlates with the formation of "eye" patterns. We measured stain diameter, "coffee-ring" thickness, radial density profile, and entropy computed by GLCM-statistics to quantify the structural differences among deposit groups. We found that "functional" patterns are structurally indistinguishable among them, but they are clearly different from elements of the other deposit groups. An exponential decay function describes pattern formation time as a function of substrate temperature, which is independent from protein concentration. Patterns formation at 32 ^∘C takes place up to 63% less time and preserves the structural characteristics of dried droplets in proteins formed at room temperature. Therefore, we argue that droplet evaporation at this substrate temperature could be an excellent candidate to make a more efficient diagnosis based on droplet evaporation of biofluids.

Leveraging the Coffee Ring Effect for a Defect-Free Electroformation of Giant Unilamellar Vesicles

We took advantage of the microflow hydrodynamics in the evaporation of sessile droplets to increase the height uniformity of thin lipid films for the subsequent electroformation of defect-free giant unilamellar vesicles (GUV). By serially casting progressively larger liposome suspension droplets on the same spot of an indium-tin-oxide (ITO) electrode, we managed to leverage the coffee ring effect (CRE) in the evaporation of each droplet to generate a smeared multilayer film of uniform thickness. This multidroplet technique of lipid film formation outperformed the traditional single-droplet deposition, improving the final quality of electroformed GUV samples. The proposed film formation technique constitutes a solvent-free method that results in a dramatic reduction (∼20×) in the appearance of undesirable structures like nonspherical (NSV), multilamellar (MLV), and multivesicular (MVV) vesicles.

Texture analysis of protein deposits produced by droplet evaporation

The deposit patterns derived from droplet evaporation allow current development of medical tests and new strategies for diagnostic in patients. For such purpose, the development and implementation of algorithms capable of characterizing and differentiating deposits are crucial elements. We report the study of deposit patterns formed by the droplet evaporation of binary mixtures of proteins containing NaCl. Optical microscopy reveals aggregates such as tip arrow-shaped, dendritic and semi-rosette patterns, needle-like and scalloped lines structures, as well as star-like and prism-shaped salt crystals. We use the first-order statistics (FOS) and gray level co-occurrence matrix (GLCM) to characterize the complex texture of deposit patterns. Three significant findings arise from this analysis: first, the FOS and GLCM parameters structurally characterize protein deposits. Secondly, they conform to simple exponential laws that change as a function of the NaCl concentration. Finally, the parameters are capable of revealing the different structural changes that occur during the droplet evaporation.

Patterns produced by dried droplets of protein binary mixtures suspended in water

Patterns formed by the evaporation of a drop containing biological molecules have provided meaningful information about certain pathologies. In this context, several works propose the study of protein solutions as a model to understand the formation of deposits of biological fluids. Generally, dry droplets of proteins in a saline solution create complex aggregates. Here, we present an experimental study on the formation of patterns produced by the evaporation of droplet suspensions containing a protein binary mixture. We explore the structural aspect of such deposits by using optical and atomic force microscopy. We found that salt is unnecessary for the formation of complex structures such as crystal clusters, dendritic and undulated branches, and interlocked chains. Such structural features allow us to differentiate among protein binary mixtures. Finally, we discuss the potential use of this finding to reveal the presence of a protein suspensions, the folded and unfolded state of a protein, as well as their structural changes.