Drug-eluting silicone hydrogel for therapeutic contact lenses: Impact of sterilization methods on the system performance

Drug-impregnated contact lenses via supercritical carbon dioxide: A viable solution for the treatment of bacterial and fungal keratitis

Keratitis is a corneal infection caused by various bacteria and fungi. Eye drop treatment of keratitis involves significant challenges due to difficulties in administration, inefficiencies in therapeutic dosage, and frequency of drug applications. All these are troublesome and result in unsuccessful treatment, high cost, time loss, development of drug resistance by microorganisms, and a massive burden on human health and the healthcare system. Most of the antibacterial and antifungal medications are non-water-soluble and/or include toxic drug formulations. Here, the aim was to develop drug-loaded contact lenses with therapeutic dosage formulations and extended drug release capability as an alternative to eye drops, by employing supercritical carbon dioxide (ScCO2) as a drug impregnation solvent to overcome inefficient ophthalmic drug use. ScCO2, known as a green solvent, has very low viscosity which provides high mass transfer power and could enhance drug penetration into contact lenses much better with respect to drug loading using other solvents. Here, moxifloxacin (MOX) antibiotic and amphotericin B (AMB) antifungal medicines were separately loaded into commercially available silicone hydrogel contact lenses through 1) drug adsorption from the aqueous solutions and 2) impregnation techniques via ScCO2 and their efficacies were compared. Drug impregnation parameters, i.e., 8-25 MPa pressure, 310-320 K temperature, 2-16-hour impregnation times, and the presence of ethanol as polar co-solvent were investigated for the optimization of the ScCO2 drug impregnation process. The highest drug loading and long-term release kinetic from the contact lenses were obtained at 25 MPa and 313 K with 2.5 h impregnation time by using 1 % ethanol (by volume). Furthermore, antibacterial/antifungal activities of the MOX- and AMB-impregnated contact lenses were effective against in vitro Pseudomonas aeruginosa (ATCC 10145) bacteria and Fusarium solani (ATCC 36031) fungus for up to one week. Consequently, the ScCO2 method can be effectively used to impregnate commercial contact lenses with drugs, and these can then be safely used for the treatment of keratitis. This offers a sustainable delivery system at effective dosage formulations with complete bacterial/fungal inhibition and termination, making it viable for real animal/human applications.

Hydrogel for light delivery in biomedical applications

Traditional optical waveguides or mediums are often silica-based materials, but their applications in biomedicine and healthcare are limited due to the poor biocompatibility and unsuitable mechanical properties. In term of the applications in human body, a biocompatible hydrogel system with excellent optical transparency and mechanical flexibility could be beneficial. In this review, we explore the different designs of hydrogel-based optical waveguides derived from natural and synthetic sources. We highlighted key developments such as light emitting contact lenses, implantable optical fibres, biosensing systems, luminating and fluorescent materials. Finally, we expand further on the challenges and perspectives for hydrogel waveguides to achieve clinical applications.

Clinical Applicable Carboxymethyl Chitosan with Gel-Forming and Stabilizing Properties Based on Terminal Sterilization Methods of Electron Beam Irradiation

Carboxymethyl chitosan (CMC)-based hydrogels have great potential for clinical applications, but a critical sterilization process must be addressed to bring them to market. Compared to ethylene oxide sterilization or heat sterilization, irradiation sterilization avoids alkylation and heat damage, while available studies on γ-irradiated other polysaccharides show that solution polysaccharides are susceptible to degradation or cross-linking. Aiming at the challenges brought by the γ-irradiation process of polysaccharide aqueous solution, this paper innovatively proposes the lyophilized CMC using electron beam (EB) irradiation, which not only avoids the generation of free radicals in the irradiated water leading to the degradation and cross-linking of polysaccharides but also retains the properties of CMC in terms of gel formation, stabilization, and clinical application. We used FTIR, TG, GPC, and microbial load tests to demonstrate that lyophilized CMC did not have significant changes in structure and molecular weight after EB irradiation, complied with the requirements for sterilization, and still had gel stability, thus proving that lyophilized CMC could be used for EB irradiation and met the requirements for clinical application. Therefore, this work is expected to further advance CMC injectable hydrogels toward clinical applications and provide a new direction for the sterilization processes of other polysaccharide hydrogels.

Matrix hyaluronic acid and bilayer poly-hydroxyethyl methacrylate-hyaluronic acid films as potential ocular drug delivery platforms

This study aimed to design hydrogel based films comprising hyaluronic acid (HA) to overcome limitations of currently used eye drops. Timolol-loaded crosslinked (X2) HA-based and bilayer (B2) (pHEMA/PVP-HA-based layers) films were designed and characterized. The films were transparent (UV, visual observation) with crosslinked (<80 %) films showing lower light transmittance than bilayer (>80 %) films. X2 showed significantly higher swelling capacity, tensile strength and elastic modulus (5491.6 %, 1539.8 Nmm-2, 1777.2 mPa) than B2 (1905.0 %, 170.0N mm-2, 67.3 mPa) respectively. However, X2 showed lower cumulative drug released and adhesive force (27.3 %, 6.2 N) than B2 (57.5 %, 8.6 N). UV sterilization did not significantly alter physical properties, while SEM and IR microscopy showed smooth surface morphology and homogeneous drug distribution. Timolol permeation (EpiCorneal™/porcine cornea) depended on the film matrix with erodible films showing similar permeation to commercial eyedrops. Drug permeation for porcine cornea (X2 = 549.0.2, B2 = 312.1 μgcm-2 h-1) was significantly faster than EpiCorneal™ (X2 = 55.2, B2 = 37.6 μgcm-2 h-1), but with a linear correlation between them. All the selected optimized films showed acceptable compatibility (MTT assay) with both HeLa cells and EpiCorneal™. In conclusion, crosslinked and bilayer HA based films showed ideal characteristics suitable for potential ocular drug delivery, though further work is required to further optimize these properties and confirm their efficacy including in vivo tests.

A promising 'single' and 'dual' drug-nanocomposite enriched contact lens for the management of glaucoma in response to the tear fluid enzyme

Glaucoma is a neurodegenerative condition that results in the damage of retinal ganglion cells due to elevated intraocular pressure (IOP). To curtail the limitations associated with conventional treatments such as eye drops and ocular suspensions, we have developed 'single' and 'dual' drug delivery contact lenses (CLs), that is, latanoprost (LP) and latanoprost-timolol (LP-TM) deliverable CLs, in response to lysozyme (Lyz), which is abundant in the lacrimal fluid. Since chitosan (CS) can entrap more of the drug and also undergo hydrolysis in the presence of Lyz, we have employed CS for the composite preparation. The CL fabrication was performed by free radical copolymerization of poly(2-hydroxyethyl methacrylate) (pHEMA) in the presence of the drug-loaded nanocomposite with UV-curing initiators using the pre-drug loading strategy. The surface morphological, optical and mechanical investigations confirmed the presence of the drugs, ≥80% transparency, the adequate flexibility and biocompatibility of both the CLs. The in vitro release experiments showed the release of 95.86% LP from LP-CL, and 83.87% LP and 86.70% TM from LP-TM-CL in the presence of 1.5 mg mL-1 of Lyz in 72 h. In vitro biocompatibility assay against human corneal epithelial (HCE) cells and ex vivo experiments on HET-CAM confirmed that the fabricated LP-CL and LP-TM-CL are well tolerated. Moreover, in vivo safety evaluations of CLs on New Zealand white rabbit eyes suggest no sign of irritation to the ocular tissues within 72 h of observation. Hence, the study suggests that the 'single' and 'dual' drug-loaded CLs could open a new avenue to manage glaucoma by maintaining mean diurnal IOP.

A review of conventional and emerging technologies for hydrogels sterilization

Hydrogels are extensively used in the biomedical field, as drug delivery systems, wound dressings, contact lenses or as scaffolds for tissue engineering. Due to their polymeric nature and the presence of high amounts of water in their structure, hydrogels generally present high sensitivity to terminal sterilization. The establishment of an efficient sterilization protocol that does not compromise the functional properties of the hydrogels is one of the challenges faced by researchers when developing a hydrogel for a specific application. Yet, until very recently this aspect was largely ignored in the literature. The present paper reviews the state of literature concerning hydrogels sterilization, compiling the main findings. Conventional terminal sterilization methods (heat sterilization, radiation sterilization, and gas sterilization) as well as emerging sterilization techniques (ozone, supercritical carbon dioxide) are covered. Considerations about aseptic processing are also included. Additionally, and as a framework, hydrogels' polymeric materials, types of networks, and main biomedical applications are summarily described.

Cellulose Acetate Phthalate-Based pH-Responsive Cyclosporine A-Loaded Contact Lens for the Treatment of Dry Eye

Cyclosporine A (CsA) as an eye drop is an effective treatment for dry eye. However, it has potential side effects and a short ocular residence time. To overcome these obstacles, we developed a cellulose acetate phthalate-based pH-responsive contact lens (CL) loaded with CsA (CsA-CL). The CsA was continuously released from the CsA-CL at physiological conditions (37 °C, pH 7.4) without an initial burst. CsA was well-contained in the selected storage condition (4 °C, pH 5.4) for as long as 90 days. In safety assays, cytotoxicity, ocular irritation, visible light transmittance, and oxygen permeability were in a normal range. CsA concentrations in the conjunctiva, cornea, and lens increased over time until 12 h. When comparing the therapeutic efficacy between the normal control, experimental dry eye (EDE), and treatment groups (CsA eye drop, naïve CL, and CsA-CL groups), the tear volume, TBUT, corneal fluorescein staining at 7 and 14 days, conjunctival goblet cell density, and corneal apoptotic cell counts at 14 days improved in all treatment groups compared to EDE, with a significantly better result in the CsA-CL group compared with other groups (all p < 0.05). The CsA-CL could be an effective, stable, and safe option for inflammatory dry eye.

Formulation development and evaluation of therapeutic contact lens loaded with ganciclovir

PURPOSE

In the present investigation ganciclovir (GAN) loaded microparticles dispersed in hydrogel-based contact lenses were fabricated, characterized and evaluated for eye irritation.

METHODS

GAN-Hydroxy Propyl Methyl Cellulose (HPMC) microparticles were prepared by solvent evaporation method and evaluated for entrapment efficiency, drug content and drug release. The Polyhydroxyethylmethacrylate (pHEMA) contact lenses were synthesized by free radical polymerization reaction using crosslinkers like ethylene glycoldimethacrylate and photoinitiator such as IRGACURE 1173^®, in UVB light, λ 365 nm. The GAN-HPMC microparticles when incorporated into the premonomer mixture and polymerized together give rise to a particle dispersion system in the hydrogel contact lenses. The contact lenses were studied for surface morphology, transmittance, swelling, drug release, Na⁺ion permeability and hens egg test chorioallantoic membrane assay (HETCAM).

RESULTS

Hydrogel contact lens exhibited satisfactory surface morphology, transmittance, swelling, Na⁺ion permeability (3.72 × 106 mm²/min) and a release of 48 h suggesting a potential for prolonged ocular drug delivery. Furthermore, HETCAM exhibited no signs of ocular irritation.

CONCLUSION

The developed delivery platform is a promising alternative to conventional dosage forms like eye drops, suspensions and ointments due to its increase in the residence time attributed to its prolonged release profile.

Polymeric Drug Delivery Devices: Role in Cornea and External Disease

ABSTRACT

The field of ophthalmic drug delivery is undergoing rapid changes not only in the evolution of pharmacologic agents but also in the novel drug delivery vehicles. The ocular surface has limitations to drug penetration because of the presence of tight junctions between basal epithelial cells, which limits the amount of drug that can be absorbed after topical instillation. In addition, nasolacrimal drainage reduces the precorneal residence time significantly. Contact lenses (CLs) have been considered as possible carriers for topical medications because they reside on the ocular surface for a sufficient length of time, and pharmacologic agents may be copolymerized with hydrogels allowing controlled drug diffusion. This strategy reduces the frequency of dosage while improving compliance. Modification of drug delivery vehicles is essential to allow sustained release of the drug from a polymeric complex, facilitate stability and residence time of the drug on the precorneal tear film, and improve penetration into biologic membranes. This review focuses on updates in CL-based and non-CL-based strategies in ophthalmic drug delivery.

Melt-extrusion 3D printing of resorbable levofloxacin-loaded meshes: Emerging strategy for urogynaecological applications

Current surgical strategies for the treatment of pelvic floor dysfunctions involve the placement of a polypropylene mesh into the pelvic cavity. However, polypropylene meshes have proven to have inadequate mechanical properties and have been associated to the arising of severe complications, such as infections. Furthermore, currently employed manufacturing strategies are unable to produce compliant and customisable devices. In this work, polycaprolactone has been used to produce resorbable levofloxacin-loaded meshes in two different designs (90° and 45°) via melt-extrusion 3D printing. Drug-loaded meshes were produced using a levofloxacin concentration of 0.5% w/w. Drug loaded meshes were successfully produced with highly reproducible mechanical and physico-chemical properties. Tensile test results showed that drug-loaded 45° meshes possessed a mechanical behaviour close to that of the vaginal tissue (E ≃ 8.32 ± 1.85 MPa), even after 4 weeks of accelerated degradation. Meshes released 80% of the loaded levofloxacin in the first 3 days and were capable of producing an inhibitory effect against S. Aureus and E. coli bacterial strains with an inhibition zone equal to 12.8 ± 0.45 mm and 15.8 ± 0.45 mm respectively. Thus, the strategy adopted in this work holds great promise for the manufacturing of custom-made surgical meshes with antibacterial properties.

Pharmaceutical-loaded contact lenses as an ocular drug delivery system: A review of critical lens characterization methodologies with reference to ISO standards

Therapeutic contact lenses for ocular drug delivery have received considerable interest as they can potentially enhance ocular bioavailability, increase patient compliance, and reduce side effects. Along with the successful in vitro and in vivo studies on sustained drug delivery through contact lenses, lens critical properties such as water content, optical transparency and modulus have also been investigated. Aside from issues such as drug stability or burst release, the potential for the commercialization of pharmaceutical-loaded lenses can be limited by the alteration of lens physical and chemical properties upon the incorporation of therapeutic or non-therapeutic components. This review outlines advances in the use of pharmaceutical-loaded contact lenses and their relevant characterization methodologies as a potential ocular drug delivery system from 2010 to 2020, while summarizing current gaps and challenges in this field. A key reference point for this review is the relevant ISO standards on contact lenses, relating to the associated characterization methodologies. The content of this review is categorized based on the chemical, physical and mechanical properties of the loaded lens with the shortcomings of such analytical technologies examined.

Atorvastatin-Eluting Contact Lenses: Effects of Molecular Imprinting and Sterilization on Drug Loading and Release

Statins are receiving increasing attention in the ophthalmic field. Their activity as 3-hydroxy-3-methylglutaryl–CoA (HMG–CoA) reductase inhibitors is clinically used to regulate cholesterol levels and leads to pleiotropic effects, which may help in the management of diabetes-related ocular pathologies. This work aims to design bioinspired contact lenses (CLs) with an affinity for atorvastatin by mimicking the active site of HMG–CoA reductase. Sets of imprinted and nonimprinted 2-hydroxyethyl methacrylate (HEMA) hydrogels were synthesized, varying the contents in functional monomers that bear chemical groups that resemble those present in HMG–CoA reductase, namely, ethylene glycol phenyl ether methacrylate (EGPEM), 2-aminoethyl methacrylate hydrochloride (AEMA), and N-(3-aminopropyl) methacrylamide hydrochloride (APMA). The hydrogels were characterized in terms of suitability as CLs (solvent uptake, light transmission, mechanical properties, and biocompatibility) and capability to load and release atorvastatin. Three sterilization protocols (steam heat, gamma radiation, and high hydrostatic pressure) were implemented and their effects on hydrogel properties were evaluated. Copolymerization of AEMA and, particularly, APMA endowed the hydrogels with a high affinity for atorvastatin (up to 11 mg/g; K_N/W > 200). Only high hydrostatic pressure sterilization preserved atorvastatin stability and hydrogel performance. Permeability studies through the porcine cornea and sclera tissues revealed that the amount of atorvastatin accumulated in the cornea and sclera could be effective to treat ocular surface diseases.

Contact Lenses as Ophthalmic Drug Delivery Systems: A Review

Ophthalmic drugs used for the treatment of various ocular diseases are commonly administered by eye drops. However, due to anatomical and physiological factors, there is a low bioavailability of the active principle. In order to increase the drug residence time on the cornea to adequate levels, therapeutic contact lenses have recently been proposed. The polymeric support that constitutes the contact lens is loaded with the drug; in this way, there is a direct and effective pharmacological action on the target organ, promoting a prolonged release of the active principle. The incorporation of ophthalmic drugs into contact lenses can be performed by different techniques; nowadays, the soaking method is mainly employed. To improve the therapeutic performance of drug-loaded contact lenses, innovative methods have recently been proposed, including the impregnation with supercritical carbon dioxide. This updated review of therapeutic contact lenses production and application provides useful information on the most effective preparation methodologies, recent achievements and future perspectives.

Moxifloxacin-imprinted silicone-based hydrogels as contact lens materials for extended drug release

Contact lenses may act as drug release platforms for the treatment of ocular infections, but there is still the need for extending their typical release periods and enhancing ocular bioavailability. The present study aimed to develop a molecularly imprinted silicone-based hydrogel to be used in the manufacturing of contact lenses that can be loaded efficiently and be able to release the antibiotic moxifloxacin hydrochloride (MXF) in a sustained way. A set of hydrogels was prepared by the molecular imprinting method using acrylic acid (AA) as the functional monomer for the specific recognition of MXF. The modified hydrogels loaded a higher amount of MXF, which was released for a longer time. In vitro experiments, using a microfluidic cell to mimic the ocular surface fluid turnover, showed that the imprinted hydrogel TRIS(300)-I prepared with the highest content in AA led to MXF concentrations in the release medium which were effective against S. aureus and S. epidermidis for about 2 weeks. Furthermore, some important properties such as water uptake, wettability, transmittance, ionic permeability, and Young´s modulus of the modified hydrogel remained within the range of values recommended for contact lenses. No cytotoxicity and no potential ocular irritancy effect were detected. Such hydrogel seems to be a promising alternative to the current options for the treatment of ocular infections.

Multi-region finite element modelling of drug release from hydrogel based ophthalmic lenses

Understanding the way in which drug is released from drug carrying hydrogel based ophthalmic lenses aids in the development of efficient ophthalmic drug delivery. Various solute-polymer interactions affect solute diffusion within hydrogels as well as hydrogel-bulk partitioning. Additionally, surface modifications or coatings may add to resistance of mass transfer across the hydrogel interface. It is necessary to consider both interfacial resistances as well as the appropriate driving force when characterizing interface flux. Such a driving force is induced by a difference in concentration which deviates from equilibrium conditions. We present a Galerkin finite element approach for solute transport in hydrogels which accounts for diffusion within the gel, storage effects due to polymer-solute interaction, as well as partitioning and mass transfer resistance effects at the interface. The approach is formulated using a rotational symmetric model to account for realistic geometry. We show that although the resulting global system is not symmetric in the case of partitioning, it is similar to a symmetric negative semidefinite system. Thus, it has non-positive real eigenvalues and is coercive, ensuring the validity of the finite element formulation as well as the numerical stability of the implicit backward Euler time integration method employed. Two models demonstrating this approach are presented and verified with release experimental data. The first is the release of moxifloxacin from intraocular lenses (IOLs) plasma grafted with different polyacrylates. The second accounts for both loading as well as the release of diclofenac from disc shaped IOL material loaded for varied time periods and temperature.

RETRACTED: Sustained delivery of epalrestat to the retina using PEGylated solid lipid nanoparticles laden contact lens

This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor-in-Chief. Significant similarities were noticed post-publication between this article and an article submitted to the Journal of Drug Delivery Science and Technology on the same day, by an apparently unrelated research group: Tong Zhang, Tianhui Zhu, Fanyin Wang, Ling Peng and Mingying Lai 60 (2020) 101949 https://doi.org/10.1016/j.jddst.2020.101949 Moreover, the authors did not respond to the journal request to comment on these similarities and to provide the raw data, and the Editor-in-Chief decided to retract the article. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and genuine. As such this article represents a severe abuse of the scientific publishing system.

Diclofenac sustained release from sterilised soft contact lens materials using an optimised layer-by-layer coating

A layer-by-layer (LbL) coating was designed using ionic polysaccharides (chitosan, sodium alginate, sodium hyaluronate) and genipin (crosslinker), to sustain the release of diclofenac sodium salt (DCF) from soft contact lens (SCL) materials. The coating was hydrophilic, biocompatible, non-toxic, reduced bacterial growth and had minor effects on the physical properties of the material, such as wettability, ionic permeability, refractive index and transmittance, which remained within the recommended values for SCLs. The coating was applied on a silicone-based hydrogel and on commercial SofLens and Purevision SCLs. The coating attenuated the initial drug burst and extended the therapeutic period for, at least, two weeks. Relevantly, the problems of sterilizing drug loaded SCLs coated with biopolymers, using classic methods that involve high temperature or radiation, were successfully solved through high hydrostatic pressure (HHP) sterilization.

Tailored gatifloxacin Pluronic® F-68-loaded contact lens: Addressing the issue of transmittance and swelling

Loading of gatifloxacin in contact lenses affects critical lens properties (optical and swelling) owing to drug precipitation in the contact lens matrix. The presence of Pluronic® F-68 in the packaging solution creates in-situ micelles in the contact lens to dissolve gatifloxacin precipitates and provide sustained drug release. The micelles further improved the drug uptake from the drug-packaging solution to create an equilibrium of drug between the lens matrix and the packaging solution. In this study, we optimized gatifloxacin-pluronic-loaded contact lenses to achieve the desired optical transmittance, swelling, and gatifloxacin loading capacity as well as sustained drug delivery. Optimization of gatifloxacin-pluronic-loaded contact lens was carried out using a 3² factorial design by tailoring the concentration of Pluronic® F-68 in the packaging solution (X₁) and the amount of gatifloxacin in the monomer solution (X₂) to achieve the desired lens properties. The optimized batch (X₁ = 0.3%w/v and X₂ = 0.3%w/v) showed an optical transmittance of 92.84%, swelling of 92.36% and gatifloxacin loading capacity of 92.56 μg. The in vitro flux data of the optimized batch (GT-Pl-CL) showed sustained release up to 72 h, whereas soaked contact lenses (SM-CL) and direct gatifloxacin-loaded contact lenses (DL-CL) showed a sustained release up to 48 h. The in vivo gatifloxacin release data for rabbit tear fluid showed sustained release with a high gatifloxacin level for the GT-Pl-CL lens in comparison to the SM-CL and the eye drop solution. This study demonstrates the application of the 3² full factorial design to optimize gatifloxacin-pluronic-loaded contact lenses to achieve the desired optical transmittance, swelling, and drug loading capacity.

Antimicrobial Nitric Oxide Releasing Contact Lens Gels for the Treatment of Microbial Keratitis

Microbial keratitis is a serious sight threatening infection affecting approximately two million individuals worldwide annually. While antibiotic eye drops remain the gold standard treatment for these infections, the significant problems associated with eye drop drug delivery and the alarming rise in antimicrobial resistance has meant that there is an urgent need to develop alternative treatments. In this work, a nitric oxide releasing contact lens gel displaying broad spectrum antimicrobial activity against two of the most common causative pathogens of microbial keratitis is described. The contact lens gel is composed of poly-ε-lysine (pεK) functionalized with nitric oxide (NO) releasing diazeniumdiolate moieties which enables the controlled and sustained release of bactericidal concentrations of NO at physiological pH over a period of 15 h. Diazeniumdiolate functionalization was confirmed by Fourier transform infrared (FTIR), and the concentration of NO released from the gels was determined by chemiluminescence. The bactericidal efficacy of the gels against Pseudomonas aeruginosa and Staphylococcus aureus was ascertained, and between 1 and 4 log reductions in bacterial populations were observed over 24 h. Additional cell cytotoxicity studies with human corneal epithelial cells (hCE-T) also demonstrated that the contact lens gels were not cytotoxic, suggesting that the developed technology could be a viable alternative treatment for microbial  keratitis.

Bioinspired hydrogels for drug-eluting contact lenses

Efficient ocular drug delivery that can overcome the challenges of topical application has been largely pursued. Contact lenses (CLs) may act as light-transparent cornea/sclera bandages for prolonged drug release towards the post-lens tear fluid, if their composition and inner architecture are fitted to the features of the drug molecules. In this review, first the foundations and advantages of using CLs as ocular drug depots are revisited. Then, pros and cons of common strategies to prepare drug-loaded CLs are analyzed on the basis of recent examples, and finally the main section focuses on bioinspired strategies that can overcome some limitations of current designs. Most bioinspired strategies resemble a reverse engineering process to create artificial receptors for the drug inside the CL network by mimicking the human natural binding site of the drug. Related bioinspired strategies are being also tested for designing CLs that elute comfort ingredients mimicking the blinking-associated renewal of eye mucins. Other bioinspired approaches exploit the natural eye variables as stimuli to trigger drug release or take benefit of bio-glues to specifically bind active components to the CL surface. Overall, biomimicking approaches are being revealed as valuable tools to fit the amounts loaded and the release profiles to the therapeutic demands of each pathology. STATEMENT OF SIGNIFICANCE: Biomimetic and bioinspired strategies are remarkable tools for the optimization of drug delivery systems. Translation of the knowledge about how drugs interact with the natural pharmacological receptor and about components and dynamics of anterior eye segment may shed light on the design criteria for obtaining efficient drug-eluting CLs. Current strategies for endowing CLs with controlled drug release performance still require optimization regarding amount loaded, drug retained in the CL structure during storage, regulation of drug release once applied onto the eye, and maintenance of CL physical properties. All these limitations may be addressed through a variety of recently growing bioinspired approaches, which are expected to pave the way of medicated CLs towards the clinics.

Sterilization of hydrogels for biomedical applications: A review

Despite the beneficial properties and outstanding potential of hydrogels for biomedical applications, several unmet challenges must be overcome, especially regarding to their known sensitivity to conventional sterilization methods. It is crucial for any biomaterial to withstand an efficient sterilization to obtain approval from regulatory organizations and to safely proceed to clinical trials. Sterility assurance minimizes the incidence of medical device-related infections, which still constitute a major concern in health care. In this review, we provide a detailed and comprehensive description of the published work from the past decade regarding the effects of sterilization on different types of hydrogels for biomedical applications. Advances in hydrogel production methods with simultaneous sterilization are also reported. Terminal sterilization methods can induce negative or positive effects on several material properties (e.g., aspect, size, color, chemical structure, mechanical integrity, and biocompatibility). Due to the complexity of factors involved (e.g., material properties, drug stability, sterilization conditions, and parameters), it is important to note the virtual impossibility of predicting the outcome of sterilization methods to determine a set of universal rules. Each system requires case-by-case testing to select the most suitable, effective method that allows for the main properties to remain unaltered. The impact of sterilization methods on the intrinsic properties of these systems is understudied, and further research is needed. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2472-2492, 2018.