N-Halamine polymer from bipolymer to amphiphilic terpolymer with enhancement in antibacterial activity

Bifunctional Cu-incorporated carbon nanospheres via in-situ complexation strategy as efficient toluene adsorbents and antibacterial agents

Carbon adsorbents have been widely used to remove indoor volatile organic compounds (VOCs), however, the proliferation of bacteria on the carbon adsorbents may deteriorate the indoor air quality and thus pose a serious threat to human health. Herein, we report the synthesis of antibacterial porous carbon spheres (carbonized aminophenol-formaldehyde resin, CAF) with well-dispersed Cu species via an in situ incorporation of Cu2+ during the polymerization of 3-aminophenol-formaldehyde resin followed by a thermal carbonization and reduction process. Compared with CAF, the Cu/CAF-x nanocomposites with Cu loading show a much higher specific surface area (>700 m2 g-1vs. 569 m2 g-1 for CAF). In addition, the pore size of Cu/CAF-x is ranging from 0.7 to 1.68 nm, which is exactly conducive to adsorb the toluene molecules. As a result, the toluene adsorption capacity is improved from 123.50 mg g-1 for CAF to >170 mg g-1 for Cu/CAF-x. More importantly, such adsorbents possess excellent antibacterial performance, the Cu/CAF-10 (10 wt% of Cu loading) with a concentration of 50 μg mL-1 can completely kill the E. coli within 30 min. Our work paves the way to the development of bifunctional adsorbents with both efficient VOCs adsorption and excellent antibacterial performance.

Construction of compostable packaging with antibacterial property and improved performance using sprayed coatings of modified cellulose nanocrystals

Increasing concerns about food safety and the environment have facilitated the development of eco-friendly antibacterial packaging. This study aimed to demonstrate a facile way to fabricate active packaging materials with modified cellulose nanocrystals (CNCs) and compare the effects of different modified CNCs on the performance of compostable materials. Polylactic acid (PLA) film was selected as a model, and CNCs were modified with methacrylamide, cetyltrimethylammonium bromide, and zinc oxide, respectively, and then applied on the surface of PLA films by spray-coating. All modified CNCs showed excellent antibacterial activity against S. aureus and E. coli (>99.999 %). The effects of different CNC modifications on the performance of PLA films were investigated. Compared to neat PLA films, PLA/CNC films exhibited improved mechanical strength with maintained flexibility, lower gas permeability, and faster compost disintegration rate, and extended the shelf life of wrapped pork samples from 3 days to >10 days. Therefore, this work will also facilitate the applications of PLA materials in eco-friendly packaging.

Influence of lipid bilayer composition on the activity of antimicrobial quaternary ammonium ionenes, the interplay of intrinsic lipid curvature and polymer hydrophobicity, the role of cardiolipin

Incorporation of hydrophobic component into amphiphilic polycations structure is frequently accompanied by an increase of antimicrobial activity. There is, however, a group of relatively hydrophilic polycations containing quaternary ammonium moieties along mainchain, ionenes, which also display strong antimicrobial and limited hemolytic properties. In this work, an influence of a hydrophobic side group length on antimicrobial mechanism of action is investigated in a series of novel amphiphilic ionenes. High antimicrobial activity was found by determination of minimum inhibitory concentration (MIC) and minimum bactericidal, and fungicidal concentration (MBC and MFC) in both growth media and a buffer. Biocompatibility was estimated by hemolytic and mammalian cells viability assays. Mechanistic studies were performed using large unilamellar vesicles (LUVs) with different lipid composition, as simplified models of cell membranes. The investigated ionenes are potent and selective antimicrobial molecules displaying a decrease of antimicrobial activity correlated with increase of hydrophobicity. Studies using LUVs revealed that the cardiolipin is an essential component responsible for the lipid bilayer permeabilization by investigated ionens. In contrast to relatively hydrophilic ionenes, more hydrophobic polymers showed an ability to stabilize membranes composed of lipids with negative spontaneous curvature in a certain range of polymer to lipid ratio. The results substantially contribute to the understanding of antimicrobial activity of the investigated class of polymers.

A quinine-based quaternized polymer: a potent scaffold with bactericidal properties without resistance

A quinine-based quaternized polymer confers bactericidal efficacy by destroying the membrane structure of bacteria.

Novel quat/di-N-halamines silane unit with enhanced synergism polymerized on cellulose for development of superior biocidability

A silane unit with enhanced synergism that is realized using one cationic quaternary ammonium salt (QAS) to draw anionic bacteria to two N-halamine functionalities was designed and polymerized on cellulose for superior biocidability. A monomer containing one tertiary amine, one amide N-H, and one imide N-H, was synthesized via alcoholysis of 3-triethoxysilylpropyl succinic anhydride with 2-(dimethylamino)ethan-1-ol and following esterification with 5-(4-hydroxyphenyl)hydantoin. The triethoxysilyl groups of the monomer were hydrolyzed to silanol groups to condense with counterparts in different hydrolyzates and with hydroxyl groups on cellulose to form a polymeric modifier. Each silane unit of the modifier has one QAS and two N-halamine functionalities (quat/di-N-halamines) after quaternization of the tertiary amine and chlorination of the amide and imide hydrogens. The resultant cellulose suppressed (7 logs) both Staphylococcus aureus and Escherichia coli within 3 min, demonstrating an enhanced synergism since the inactivation rate is faster than counterparts decorated with only N-halamine and with synergistic units of one cationic center and one N-halamine. The modifier exhibited promising stability and rechargeability toward washings, UV irradiation, and long-term storage. The proved enhanced synergism from the integration of one cationic center with multiple N-halamines directs the synthesis of more powerful biocides for developing antibacterial polymers.

New ferrocene-triazole derivatives for multisignaling detection of Cu2+ in aqueous medium and their antibacterial activity

Ferrocene-based naphthalene or quinoline receptors 1-4 linked by triazole were designed and synthesized. Their recognition properties of metal cations have been investigated systematically in aqueous environment. Upon addition 1 equiv. of Cu²⁺ ion, receptors 1 (C₂₃H₁₉FeN₃O) and 2 (C₂₂H₁₈FeN₄O) showed fluorescent turn-off, enhanced absorption and color variations. At the same time, receptor 1 also caused the perturbation of redox potential after addition 1 equiv. of Cu²⁺ ion. Therefore, receptors 1 and 2 behaved as naked-eye chemosensors and fluorescent probes for Cu²⁺ without interference by other ions and with low detection limit. In addition, receptor 1 could also be considered electrochemical sensor for Cu²⁺ having excellent sensitivity and selectivity. However, increasing the molecules flexibility resulted in the lower selectivity of ion recognition in the case of receptors 3 (C₂₄H₂₁FeN₃O) and 4 (C₂₃H₂₀FeN₄O). Furthermore, this series of compounds were nontoxicity and receptor 1 exhibited certain antibacterial activity.

Enhanced UV stability of N-halamine-immobilized Fe3O4@SiO2@TiO2 nanoparticles: synthesis, characteristics and antibacterial property

Recycling of N-halamine-modified Fe₃O₄@SiO₂@TiO₂ antibacterial materials with UV stability.

Reactions of phenolic compounds with monomeric N-halamines and mesoporous material-supported N-halamines

The reactions of a monomeric N-halamine, 1-chloro-5,5-dimethylhydantoin (MCDMH), and a mesoporous material-supported N-halamine (MMSNs) with phenol and p-cresol (two common contaminants in water) were investigated. MCDMH reacted rapidly with the phenolic compounds, and pH values had little effects on the reactions. On the contrary, MMSNs reacted with phenol and p-cresol only when the pH values were higher than 10. Phenol showed a lower reaction rate than p-cresol toward MMSNs. GCMS analysis suggested that MMSNs might react with the phenolic compounds through step-wise electrophilic chlorination reactions, and the main product was 2,4,6-trichlorophenol. The reaction kinetics were studied by following the disappearance of phenolic UV absorption bands, and the kinetic parameters were determined.

Development of new hydantoin-based biocidal polymers with improved rechargeability and anti-microbial activity

Novel hydantoin based co-polymers containing both amide and imide positions for halogen capture with improved rechargeability and antibacterial activity were developed.

Reducing Bacterial Infections and Biofilm Formation Using Nanoparticles and Nanostructured Antibacterial Surfaces

With the rapid spreading of resistance among common bacterial pathogens, bacterial infections, especially antibiotic-resistant bacterial infections, have drawn much attention worldwide. In light of this, nanoparticles, including metal and metal oxide nanoparticles, liposomes, polymersomes, and solid lipid nanoparticles, have been increasingly exploited as both efficient antimicrobials themselves or as delivery platforms to enhance the effectiveness of existing antibiotics. In addition to the emergence of widespread antibiotic resistance, of equal concern are implantable device-associated infections, which result from bacterial adhesion and subsequent biofilm formation at the site of implantation. The ineffectiveness of conventional antibiotics against these biofilms often leads to revision surgery, which is both debilitating to the patient and expensive. Toward this end, micro- and nanotopographies, especially those that resemble natural surfaces, and nonfouling chemistries represent a promising combination for long-term antibacterial activity. Collectively, the use of nanoparticles and nanostructured surfaces to combat bacterial growth and infections is a promising solution to the growing problem of antibiotic resistance and biofilm-related device infections.