Hybrid vesicles from lipids and block copolymers: Phase behavior from the micro- to the nano-scale

High Resolution Membrane Structures within Hybrid Lipid-Polymer Vesicles Revealed by Combining X-Ray Scattering and Electron Microscopy

Hybrid vesicles consisting of phospholipids and block-copolymers are increasingly finding applications in science and technology. Herein, small angle X-ray scattering (SAXS) and cryo-electron tomography (cryo-ET) are used to obtain detailed structural information about hybrid vesicles with different ratios of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and poly(1,2-butadiene-block-ethylene oxide) (PBd₂₂ -PEO₁₄ , M_s  = 1800 g mol^-1 ). Using single particle analysis (SPA) the authors are able to further interpret the information gained from SAXS and cryo-ET experiments, showing that increasing PBd₂₂ -PEO₁₄ mole fraction increases the membrane thickness from 52 Å for a pure lipid system to 97 Å for pure PBd₂₂ -PEO₁₄ vesicles. Two vesicle populations with different membrane thicknesses in hybrid vesicle samples are found. As these lipids and polymers are reported to homogeneously mix, bistability is inferred between weak and strong interdigitation regimes of PBd₂₂ -PEO₁₄ within the hybrid membranes. It is hypothesized that membranes of intermediate structure are not energetically favorable. Therefore, each vesicle exists in one of these two membrane structures, which are assumed to have comparable free energies. The authors conclude that, by combining biophysical methods, accurate determination of the influence of composition on the structural properties of hybrid membranes is achieved, revealing that two distinct membranes structures can coexist in homogeneously mixed lipid-polymer hybrid vesicles.

Assembly methods for asymmetric lipid and polymer-lipid vesicles

Asymmetric unilamellar vesicles are aqueous bodies surrounded by two dissimilar leaflets made from lipids, polymers, or both. They are great models for cell membranes and attractive vehicles in potential biomedicine applications. Despite their promise, asymmetric unilamellar vesicles are not widely studied or adopted in applications. This is largely due to the complexity in generating asymmetric membranes. Recent technical advances in microfluidics have opened doors to high throughput fabrication of asymmetric unilamellar vesicles. In this review, we focus on microfluidic methods for generating asymmetric lipid vesicles, with two dissimilar lipid leaflets, and asymmetric lipid-polymer vesicles, with one lipid leaflet and one polymer leaflet. We also review a few standard non-microfluidic methods for generating asymmetric vesicles. We hope to highlight the improved capability in obtaining asymmetric vesicles through a variety of methods and encourage the wider scientific community to adopt some of these for their own work.

Charged hybrid block copolymer-lipid-cholesterol vesicles: pH, ionic environment, and composition dependence of phase transitions

The impacts of pH, salt concentration (expressed as Debye length), and composition on the phase behavior of hybrid block copolymer-lipid-cholesterol bilayers incorporating carboxyl-terminated poly(butadiene)-block-poly(ethylene oxide) copolymer (PBdPEO1800^(-)) or/and non-carboxyl-terminated PBdPEO (PBdPEO1800 or/and PBdPEO950), egg sphingomyelin (egg SM), and cholesterol were examined using fluorescence spectroscopy of laurdan. Laurdan emission spectra were decomposed into three lognormal curves as functions of energy. The ratio of the area of the mid-energy peak to the sum of the areas of all three peaks was evaluated as vesicles were cooled, yielding temperature breakpoint values (T_break) expected to be within the range of the phase transition temperature. T_break values displayed dependence on pH, Debye length, and vesicle composition consistent with an electrostatic repulsion contribution to vesicle phase behavior. Increased pH and Debye length, for which a greater dissociated fraction of PBdPEO1800^(-) and a greater energy of electrostatic repulsion would be expected, resulted in T_break values as much as 10 °C less than at low pH or short Debye lengths. Additionally, at Debye lengths comparable to those at physiologically relevant ionic strength, T_break at pH 5.9 was observed to be slightly higher than at pH 7.0 for vesicles containing 50 mol% PBdPEO1800^(-). Electrostatic effects observed for hybrid vesicles incorporating significant amounts of carboxyl-terminated polymer may have the ability to drive phase separation in response to pH drops-such as those observed after endocytosis-in physiologically relevant conditions, suggesting the utility of such materials for drug delivery.

Vesicular Nanocarriers for Phytocompounds in Wound Care: Preparation and Characterization

The need to develop wound healing preparations is a pressing challenge given the limitations of the current treatment and the rising prevalence of impaired healing wounds. Although herbal extracts have been used for many years to treat skin disorders, due to their wound healing, anti-inflammatory, antimicrobial, and antioxidant effects, their efficacy can be questionable because of their poor bioavailability and stability issues. Nanotechnology offers an opportunity to revolutionize wound healing therapies by including herbal compounds in nanosystems. Particularly, vesicular nanosystems exhibit beneficial properties, such as biocompatibility, targeted and sustained delivery capacity, and increased phytocompounds’ bioavailability and protection, conferring them a great potential for future applications in wound care. This review summarizes the beneficial effects of phytocompounds in wound healing and emphasizes the advantages of their entrapment in vesicular nanosystems. Different types of lipid nanocarriers are presented (liposomes, niosomes, transferosomes, ethosomes, cubosomes, and their derivates’ systems), highlighting their applications as carriers for phytocompounds in wound care, with the presentation of the state-of-art in this field. The methods of preparation, characterization, and evaluation are also described, underlining the properties that ensure good in vitro and in vivo performance. Finally, future directions of topical systems in which vesicle-bearing herbal extracts or phytocompounds can be incorporated are pointed out, as their development is emerging as a promising strategy.

Membrane mixing and dynamics in hybrid POPC/poly(1,2-butadiene-block-ethylene oxide) (PBd-b-PEO) lipid/block co-polymer giant vesicles

Lipids and block copolymers can individually self-assemble into vesicles, each with their own particular benefits and limitations. Combining polymers with lipids allows for further optimisation of the vesicle membranes for bionanotechnology applications. Here, POPC lipid is mixed with poly(1,2-butadiene-block-ethylene oxide) of two different molecular weights (PBd₂₂-PEO₁₄, Mr = 1800 g mol^-1 and PBd₁₂-PEO₁₁, Mr = 1150 g mol^-1) in order to investigate how increasing the polymer fraction affects membrane mixing, hydration and fluidity. Intensity contributions of fluorescently labelled lipid and polymer within mixed GUV membranes confirm membrane homogeneity within the hybrids. General polarisation measurements of Laurdan in GUVs showed little change in membrane hydration as polymer fraction is increased, which suggests good structural compatibility between lipids and polymers that gives rise to well-mixed vesicles. Membrane fluidity in hybrid GUVs was found to decrease non-linearly with increasing polymer fraction. However, the diffusion coefficients for the fluorescent polymer in hybrid membranes did not change significantly with increasing polymer content. While increasing the polymer fraction does reduce the movement of lipids through a polymer-rich matrix, insignificant difference in diffusion coefficients of the polymer suggests that its diffusion is minimally affected by increasing lipid composition in the range studied. These results lay further foundations for the wider development of hybrid vesicles with controlled properties for advanced biotechnologies.

A Review of Optical Imaging Technologies for Microfluidics

Microfluidics can precisely control and manipulate micro-scale fluids, and are also known as lab-on-a-chip or micro total analysis systems. Microfluidics have huge application potential in biology, chemistry, and medicine, among other fields. Coupled with a suitable detection system, the detection and analysis of small-volume and low-concentration samples can be completed. This paper reviews an optical imaging system combined with microfluidics, including bright-field microscopy, chemiluminescence imaging, spectrum-based microscopy imaging, and fluorescence-based microscopy imaging. At the end of the article, we summarize the advantages and disadvantages of each imaging technology.

Polymer-Lipid Hybrid Materials

Hierarchic self-assembly underpins much of the form and function seen in synthetic or biological soft materials. Lipids are paramount examples, building themselves in nature or synthetically in a variety of meso/nanostructures. Synthetic block copolymers capture many of lipid's structural and functional properties. Lipids are typically biocompatible and high molecular weight polymers are mechanically robust and chemically versatile. The development of new materials for applications like controlled drug/gene/protein delivery, biosensors, and artificial cells often requires the combination of lipids and polymers. The emergent composite material, a "polymer-lipid hybrid membrane", displays synergistic properties not seen in pure components. Specific examples include the observation that hybrid membranes undergo lateral phase separation that can correlate in registry across multiple layers into a three-dimensional phase-separated system with enhanced permeability of encapsulated drugs. It is timely to underpin these emergent properties in several categories of hybrid systems ranging from colloidal suspensions to supported hybrid films. In this review, we discuss the form and function of a vast number of polymer-lipid hybrid systems published to date. We rationalize the results to raise new fundamental understanding of hybrid self-assembling soft materials as well as to enable the design of new supramolecular systems and applications.

Giant Unilamellar Vesicle Electroformation: What to Use, What to Avoid, and How to Quantify the Results

Since its inception more than thirty years ago, electroformation has become the most commonly used method for growing giant unilamellar vesicles (GUVs). Although the method seems quite straightforward at first, researchers must consider the interplay of a large number of parameters, different lipid compositions, and internal solutions in order to avoid artifactual results or reproducibility problems. These issues motivated us to write a short review of the most recent methodological developments and possible pitfalls. Additionally, since traditional manual analysis can lead to biased results, we have included a discussion on methods for automatic analysis of GUVs. Finally, we discuss possible improvements in the preparation of GUVs containing high cholesterol contents in order to avoid the formation of artifactual cholesterol crystals. We intend this review to be a reference for those trying to decide what parameters to use as well as an overview providing insight into problems not yet addressed or solved.

Large hybrid Polymer/Lipid Unilamellar vesicle (LHUV) at the nanoscale: An insight into the lipid distribution in the membrane and permeability control

Membrane structuration of Large Hybrid Unilamellar Polymer/Lipid Vesicle (LHUV) is an important parameter on the optimization of their properties and thus their valuation in various fields. However, this kind of information is hardly accessible. In this work, we will focus on the development of LHUV obtained from the self-assembly of diblock poly(dimethylsiloxane)-b-poly(ethylene oxide) (PDMS-b-PEO) of different molar masses combined with 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) at 15% and 25% w/w content. The hybrid character of the resulting vesicles as well as their membrane structure are characterized by the mean of different techniques such as small-angle neutron scattering (SANS) and cryo-transmission electron microscopy (cryo-TEM). We show that hybrid vesicles with homogeneous membrane structure are obtained whatever the molar mass of the block copolymer (from 2500 to 4000 g/mol), with of a small number of tubular structures observed with the higher molar mass. We also demonstrate that the permeability of the LHUV, evaluated through controlled release experiments of fluorescein loaded in LHUV, is essentially controlled by the lipid/polymer composition.

Hybrid lipid/block copolymer vesicles display broad phase coexistence region

The fluidity and polar environment of ~100 nm hybrid vesicles combining dipalmitoylphosphatidylcholine (DPPC) and poly(1,2-butadiene)-block-polyethylene oxide (PBd-PEO, average molecular weight 950 g/mol) were studied upon vesicle heating using the fluorescence spectroscopy techniques of DPH anisotropy and laurdan generalized polarization (GP). These techniques indicated PBd-PEO membranes are less ordered than solid DPPC, but slightly more ordered than fluid DPPC or dioleoylphosphatidylcholine (DOPC) membranes. We find the DPH anisotropy values are less than expected from additivity of the components' anisotropies in the fluid phase mixture of DPPC and PBd-PEO, inferring that DPPC strongly fluidizes the PBd-PEO. We use transitions in DPH anisotropy and laurdan GP to create a temperature/composition phase diagram for DPPC/PBd-PEO which we find displays a significantly broader solid/fluid phase coexistence region than DPPC/DOPC, showing that DPPC partitions less readily into fluid PBd-PEO than into fluid DOPC. The existence of a broad solid/fluid phase coexistence region in DPPC/PBd-PEO vesicles is verified by Förster resonance energy transfer results and the visualization of phase separation in giant unilamellar vesicles containing up to 95% PBd-PEO and a single phase in 100% PBd-PEO vesicles at room temperature. These results add to the limited knowledge of phase behavior and phase diagrams of hybrid vesicles, and should be useful in understanding and tailoring membrane surface architecture toward biomedical applications such as drug delivery or membrane protein reconstitution.

Floating and Diving Loops of ABA Triblock Copolymers in Lipid Bilayers and Stability Enhancement for Asymmetric Membranes

Hybrid membranes of lipids and A_xB_yA_z triblock copolymers can possess better biocompatibility and mechanical stability. In this work, triblock copolymer conformations and stability of asymmetric membranes are explored by dissipative particle dynamics. The triblock copolymers in the membranes exhibit either the bridge or loop conformation. As hydrophobic B-blocks interact attractively with lipid heads, bridge-shaped copolymers are significantly inhibited and loop-shaped copolymers prefer to stay at the interface between hydrophilic and hydrophobic layers. This floating loop has a flattened conformation, consistent with the experimental findings. In contrast, for repulsive interactions between B-blocks and lipid heads, bridge-shaped copolymers are abundant and loop-shaped copolymers tend to plunge into the hydrophobic layer. This diving loop displays a random coil conformation. The asymmetric membrane in which the fractions of loop-shaped copolymers in the upper and lower leaflets are different is thermodynamically unstable. Two approaches are proposed to acquire kinetically stable asymmetric membranes. First, membrane symmetrization is arrested by eliminating bridge-shaped copolymers, which is achieved by B-block/lipid head attraction and B-block/lipid tail repulsion. Second, asymmetric triblock copolymers (x ≠ z) are used to prevent the passage of the long A-block through the hydrophobic layer.

Organized Hybrid Molecular Films from Natural Phospholipids and Synthetic Block Copolymers: A Physicochemical Investigation

In the last few years, hybrid lipid-copolymer assemblies have attracted increasing attention as possible two-dimensional (2D) membrane platforms, combining the biorelevance of the lipid building blocks with the stability and chemical tunability of copolymers. The relevance of these systems varies from fundamental studies on biological membrane-related phenomena to the construction of 2D complex devices for material science and biosensor technology. Both the fundamental understanding and the application of hybrid lipid-copolymer-supported bilayers require thorough physicochemical comprehension and structural control. Herein, we report a comprehensive physicochemical and structural characterization of hybrid monolayers at the air/water interface and of solid-supported hybrid membranes constituted by 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and the block copolymer poly(butadiene-b-ethyleneoxide) (PBD-b-PEO). Hybrid lipid-copolymer supported bilayers (HSLBs) with variable copolymer contents were prepared through spontaneous rupture and fusion of hybrid vesicles onto a hydrophilic substrate. The properties of the thin films and the parent vesicles were probed through dynamic light scattering (DLS), differential scanning calorimetry (DSC), optical ellipsometry, quartz crystal microbalance with dissipation monitoring (QCM-D), and confocal scanning laser microscopy (CSLM). Stable, hybrid lipid/copolymer systems were obtained for a copolymer content of 10-65 mol %. In particular, DSC and CSLM show lateral phase separation in these hybrid systems. These results improve our fundamental understanding of HSLBs, which is necessary for future applications of hybrid systems as biomimetic membranes or as drug delivery systems, with additional properties with respect to phospholipid liposomes.

Multifunctional nanoassemblies target bacterial lipopolysaccharides for enhanced antimicrobial DNA delivery

The development of new therapeutic strategies against multidrug resistant Gram-negative bacteria is a major challenge for pharmaceutical research. In this respect, it is increasingly recognized that an efficient treatment for resistant bacterial infections should combine antimicrobial and anti-inflammatory effects. Here, we explore the multifunctional therapeutic potential of nanostructured self-assemblies from a cationic bolaamphiphile, which target bacterial lipopolysaccharides (LPSs) and associates with an anti-bacterial nucleic acid to form nanoplexes with therapeutic efficacy against Gram-negative bacteria. To understand the mechanistic details of these multifunctional antimicrobial-anti-inflammatory properties, we performed a fundamental study, comparing the interaction of these nanostructured therapeutics with synthetic biomimetic bacterial membranes and live bacterial cells. Combining a wide range of experimental techniques (Confocal Microscopy, Fluorescence Correlation Spectroscopy, Microfluidics, NMR, LPS binding assays), we demonstrate that the LPS targeting capacity of the bolaamphiphile self-assemblies, comparable to that exerted by Polymixin B, is a key feature of these nanoplexes and one that permits entry of therapeutic nucleic acids in Gram-negative bacteria. These findings enable a new approach to the design of efficient multifunctional therapeutics with combined antimicrobial and anti-inflammatory effects and have therefore the potential to broadly impact fundamental and applied research on self-assembled nano-sized antibacterials for antibiotic resistant infections.

Hybrid Unilamellar Vesicles of Phospholipids and Block Copolymers with Crystalline Domains

Phospholipid (PL) membranes are ubiquitous in nature and their phase behavior has been extensively studied. Lipids assemble in a variety of structures and external stimuli can activate a quick switch between them. Amphiphilic block copolymers (BCPs) can self-organize in analogous structures but are mechanically more robust and transformations are considerably slower. The combination of PL dynamical behavior with BCP chemical richness could lead to new materials for applications in bioinspired separation membranes and drug delivery. It is timely to underpin the phase behavior of these hybrid systems and a few recent studies have revealed that PL-BCP membranes display synergistic structural, phase-separation, and dynamical properties not seen in pure components. One example is phase-separation in the membrane plane, which seems to be strongly affected by the ability of the PL to form lamellar phases with ordered alkyl chains. In this paper we focus on a rather less explored design handle which is the crystalline properties of the BCP component. Using a combination of confocal laser scanning microscopy and X-ray scattering we show that hybrid membranes of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and methoxy-poly(ethylene glycol)-b-poly(ε-caprolactone) (mPEG-b-PCL) display BCP-rich and PL-rich domains when the BCP comprises crystalline moieties. The packing of the hydrophilic part of the BCP (PEG) favors mixing of DPPC at the molecular level or into nanoscale domains while semi-crystalline and hydrophobic PCL moieties bolster microscopic domain formation in the hybrid membrane plane.

Physicochemical properties of L-alpha dipalmitoyl phosphatidylcholine large unilamellar vesicles: Effect of hydrophobic block (PLA/PCL) of amphipathic diblock copolymers

In the present work, we show how amphipathic diblock copolymers affect the physicochemical properties of the lipid bilayer of DPPC liposome. Diblock copolymers proposed for this study are focused in the difference between PLA and PCL hydrophobic block, because PLA and PCL differ in their glass transition temperature, where a higher ratio of PLA, lowers the flexibility of the diblock copolymer. On the contrary, a greater proportion of PCL makes the diblock copolymer more flexible. This flexibility difference between hydrophobic block would affect the physicochemical properties of lipid bilayer of DPPC. The difference of rigidity or flexibility of hydrophobic block and their interaction with DPPC large unilamellar vesicles (LUVs) was evaluated at low and high copolymers concentration. The copolymer concentrations used were chosen based on their respective cmc. We measure (a) Thermotropic behavior from GP of Laurdan and fluorescence anisotropy of DPH; (b) Relation between wavelength excitation and generalized polarization of Laurdan; (c) Time-resolved fluorescence anisotropy of DPH; (d) Water outflow through the lipid bilayer and (e) calcein release from DPPC LUVs. Furthermore, large unilamellar vesicles in the absence and in the presence of different copolymers were characterized by size and zeta-potential. The results show that the diblock copolymer at high PLA/PCL ratio, that is, greater rigidity of hydrophobic block produces an increase of the phase transition temperature (Tm). For DPPC LUVs, Tm increase 3.5 °C at low and about 4.5 °C at high copolymers concentration, sensed by Laurdan and DPH fluorescent probes, although the DPPC/copolymers molar ratio for Cop4 is higher than Cop3, Cop2 and Cop1. In addition, we observed a decrease in the polarity of microenvironments in the bilayer and an increase in the order of the acyl chains in the bilayer to a high proportion of PLA. Furthermore, the presence of diblock copolymer with high proportion of PLA, decreases water outflow from DPPC liposome and water efflux is slower; leading to a decrease in calcein release from DPPC liposomes. Our results clearly show that the greater the stiffness of the hydrophobic block, greater degree of packaging of the lipid bilayer, greater the order of the acyl chains, and greater retention of water and calcein inside the liposome. Therefore, the presence of AB-type diblock copolymers with a more rigid hydrophobic block, stabilizes the lipid bilayer and would allow a more controlled release of water, and encapsulated molecules inside of the DPPC liposome.

Characterisation of Hybrid Polymersome Vesicles Containing the Efflux Pumps NaAtm1 or P-Glycoprotein

Investigative systems for purified membrane transporters are almost exclusively reliant on the use of phospholipid vesicles or liposomes. Liposomes provide an environment to support protein function; however, they also have numerous drawbacks and should not be considered as a "one-size fits all" system. The use of artificial vesicles comprising block co-polymers (polymersomes) offers considerable advantages in terms of structural stability; provision of sufficient lateral pressure; and low passive permeability, which is a particular issue for transport assays using hydrophobic compounds. The present investigation demonstrates strategies to reconstitute ATP binding cassette (ABC) transporters into hybrid vesicles combining phospholipids and the block co-polymer poly (butadiene)-poly (ethylene oxide). Two efflux pumps were chosen; namely the Novosphingobium aromaticivorans Atm1 protein and human P-glycoprotein (Pgp). Polymersomes were generated with one of two lipid partners, either purified palmitoyl-oleoyl-phosphatidylcholine, or a mixture of crude E. coli lipid extract and cholesterol. Hybrid polymersomes were characterised for size, structural homogeneity, stability to detergents, and permeability. Two transporters, NaAtm1 and P-gp, were successfully reconstituted into pre-formed and surfactant-destabilised hybrid polymersomes using a detergent adsorption strategy. Reconstitution of both proteins was confirmed by density gradient centrifugation and the hybrid polymersomes supported substrate dependent ATPase activity of both transporters. The hybrid polymersomes also displayed low passive permeability to a fluorescent probe (calcein acetomethoxyl-ester (C-AM)) and offer the potential for quantitative measurements of transport activity for hydrophobic compounds.

Hybrid Vesicle Stability under Sterilisation and Preservation Processes Used in the Manufacture of Medicinal Formulations

Sterilisation and preservation of vesicle formulations are important considerations for their viable manufacture for industry applications, particular those intended for medicinal use. Here, we undertake an initial investigation of the stability of hybrid lipid-block copolymer vesicles to common sterilisation and preservation processes, with particular interest in how the block copolymer component might tune vesicle stability. We investigate two sizes of polybutadiene-block-poly(ethylene oxide) polymers (PBd₁₂-PEO₁₁ and PBd₂₂-PEO₁₄) mixed with the phospholipid 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) considering the encapsulation stability of a fluorescent cargo and the colloidal stability of vesicle size distributions. We find that autoclaving and lyophilisation cause complete loss of encapsulation stability under the conditions studied here. Filtering through 200 nm pores appears to be viable for sterilisation for all vesicle compositions with comparatively low release of encapsulated cargo, even for vesicle size distributions which extend beyond the 200 nm filter pore size. Freeze-thaw of vesicles also shows promise for the preservation of hybrid vesicles with high block copolymer content. We discuss the process stability of hybrid vesicles in terms of the complex mechanical interplay between bending resistance, stretching elasticity and lysis strain of these membranes and propose strategies for future work to further enhance the process stability of these vesicle formulations.

Hybrid giant lipid vesicles incorporating a PMMA-based copolymer

BACKGROUND

In recent years, there has been a growing interest in the formation of copolymer-lipid hybrid self-assemblies, which allow combining and improving the main features of pure lipid-based and copolymer-based systems known for their potential applications in the biomedical field. As the most common method used to obtain giant vesicles is electroformation, most systems so far used low T_g polymers for their flexibility at room temperature.

METHODS

Copolymers used in the hybrid vesicles have been synthesized by a modified version of the ATRP, namely the Activators ReGenerated by Electron Transfer ATRP and characterized by NMR and DSC. Giant hybrid vesicles have been obtained using electroformation and droplet transfer method. Confocal fluorescence microscopy was used to image the vesicles.

RESULTS

Electroformation enabled to obtain hybrid vesicles in a narrow range of compositions (15 mol% was the maximum copolymer content). This range could be extended by the use of a droplet transfer method, which enabled obtaining hybrid vesicles incorporating a methacrylate-based polymer in a wide range of compositions. Proof of the hybrid composition was obtained by fluorescence microscopy using labeled lipids and copolymers.

CONCLUSIONS

This work describes for the first time, to the best of our knowledge, the formation of giant hybrid polymer/lipid vesicles formed with such a content of a polymethylmethacrylate copolymer, the glass temperature of which is above room temperature.

GENERAL SIGNIFICANCE

This work shows that polymer structures, more complex than the ones mostly employed, can be possibly included in giant hybrid vesicles by using the droplet transfer method. This will give easier access to functionalized and stimuli-responsive giant vesicles and to systems exhibiting a tunable permeability, these systems being relevant for biological and technological applications.

Formation and characteristics of mixed lipid/polymer membranes on a crystalline surface-layer protein lattice

The implementation of self-assembled biomolecules on solid materials, in particular, sensor and electrode surfaces, gains increasing importance for the design of stable functional platforms, bioinspired materials, and biosensors. The present study reports on the formation of a planar hybrid lipid/polymer membrane on a crystalline surface layer protein (SLP) lattice. The latter acts as a connecting layer linking the biomolecules to the inorganic base plate. In this approach, chemically bound lipids provided hydrophobic anchoring moieties for the hybrid lipid/polymer membrane on the recrystallized SLP lattice. The rapid solvent exchange technique was the method of choice to generate the planar hybrid lipid/polymer membrane on the SLP lattice. The formation process and completeness of the latter were investigated by quartz crystal microbalance with dissipation monitoring and by an enzymatic assay using the protease subtilisin A, respectively. The present data provide evidence for the formation of a hybrid lipid/polymer membrane on an S-layer lattice with a diblock copolymer content of 30%. The hybrid lipid/polymer showed a higher stiffness compared to the pure lipid bilayer. Most interestingly, both the pure and hybrid membrane prevented the proteolytic degradation of the underlying S-layer protein by the action of subtilisin A. Hence, these results provide evidence for the formation of defect-free membranes anchored to the S-layer lattice.

Biomolecule–polymer hybrid compartments: combining the best of both worlds

Recent advances in bio/polymer hybrid compartments in the quest to obtain artificial cells, biosensors and catalytic compartments.

Large and Giant Unilamellar Vesicle(s) Obtained by Self-Assembly of Poly(dimethylsiloxane)-b-poly(ethylene oxide) Diblock Copolymers, Membrane Properties and Preliminary Investigation of their Ability to Form Hybrid Polymer/Lipid Vesicles

In the emerging field of hybrid polymer/lipid vesicles, relatively few copolymers have been evaluated regarding their ability to form these structures and the resulting membrane properties have been scarcely studied. Here, we present the synthesis and self-assembly in solution of poly(dimethylsiloxane)-block-poly(ethylene oxide) diblock copolymers (PDMS-b-PEO). A library of different PDMS-b-PEO diblock copolymers was synthesized using ring-opening polymerization of hexamethylcyclotrisiloxane (D3) and further coupling with PEO chains via click chemistry. Self-assembly of the copolymers in water was studied using Dynamic Light Scattering (DLS), Static Light Scattering (SLS), Small Angle Neutron Scattering (SANS), and Cryo-Transmission Electron Microscopy (Cryo-TEM). Giant polymersomes obtained by electroformation present high toughness compared to those obtained from triblock copolymer in previous studies, for similar membrane thickness. Interestingly, these copolymers can be associated to phospholipids to form Giant Hybrid Unilamellar Vesicles (GHUV); preliminary investigations of their mechanical properties show that tough hybrid vesicles can be obtained.

Formation and Characteristics of Lipid-Blended Block Copolymer Bilayers on a Solid Support Investigated by Quartz Crystal Microbalance and Atomic Force Microscopy

Liposomes grafted with polymer have long been used in drug delivery applications, and block copolymersomes have emerged as attractive and more robust alternatives for both drug delivery and artificial organelle applications. Hybrid membranes that could combine the respective advantages of fluid lipid and robust polymer bilayers are an attractive and enticing alternative. The properties of membranes in amphiphile vesicles are challenging to study and many applications benefit from surface-based access to the membrane. We therefore explore the self-assembly and mechanical properties of supported hybrid bilayers (SHBs) composed of polybutadiene- block-poly(ethylene oxide) block copolymers and zwitterionic phosphatidylcholine lipids on SiO₂ supports. Quartz crystal microbalance with dissipation monitoring (QCM-D) measurements show that formation of SHB on SiO₂ by vesicle fusion depends on the mass fractions of lipids and block copolymers. Atomic force microscopy was used to study the microscopic mixing of lipids in the SHB to reveal that lipid-phase separation is not observed in SHBs. Force spectroscopy was performed to extract information about thickness and mechanical properties of the hybrid membranes. SHBs are shown to combine the properties of lipid membranes and polymer brushes, and the tip force required to rupture the membrane decreases and the bilayer thickness increases as the block copolymer fraction is increased.

Extended photo-induced endosome-like structures in giant vesicles promoted by block-copolymer nanocarriers

Upon irradiation, the photosensitizer pheophorbide-a causes dramatic morphological transitions in giant unilamellar lipid vesicles. This endocytosis-like process occurs only when the photoactive species are encapsulated in a copolymer nanocarrier and strictly depends on the chemical nature of the copolymer. Altogether, these results open up new perspectives in the field of photo-chemical internalization mediated by nanoassemblies.