Bacterial adhesion and inactivation on Ag decorated TiO2-nanotubes under visible light: Effect of the nanotubes geometry on the photocatalytic activity

Efficient and sustainable photocatalytic inactivation of E. coli by an innovative immobilized Ag/TiO2 photocatalyst with peroxymonosulfate (PMS) under visible light

A novel catalytic system for effective photocatalytic inactivation of Escherichia coli (E. coli) was constructed by anchoring Ag nanoparticles (AgNPs) on silane coupling agent (SCA) pretreated TiO2 nano-tube arrays (Ag/SCA/TiO2NTAs). Morphology and structural analyses revealed that SCA could disperse AgNPs evenly on TiO2NTAs, thus inducing a superior surface plasmon resonance (SPR) effect. Ag/SCA/TiO2NTAs catalyst exhibited excellent inactivation performance when in the presence of peroxymonosulfate (PMS) and visible light (VL), with 6-log E. coli was completely inactivated within 60 min, which was 5.3, 12.5 and 13.2 times higher than that of Ag/SCA/TiO2NTAs/VL, PMS/VL and Ag/SCA/TiO2NTAs/PMS/dark systems, respectively. Additionally, the photocatalyst exhibited a highly reusable property, with the inactivation performance almost unchanged after ten cycles of uses with minimal Ag leaching. The inactivation mechanism analysis demonstrated that both radical (SO4•-, OH) and non-radical (h+, 1O2) pathways involved in E. coli inactivation, and SCA played a pivotal role in the production of reactive species. Chloride ions (Cl-) greatly enhanced the inactivation efficiency, while bicarbonate (HCO3-) and phosphate (H2PO4-) showed an inhibitory effect. Humic acid (HA) displayed a dual effect on inactivation performance, where the low concentration of HA facilitated the bacteria inactivation, while the higher dose suppressed bacteria inactivation. Moreover, the system exhibited excellent inactivation performance in tap water. This work first used SCA as the binder to fix AgNPs on TiO2NTAs for VL photocatalytic inactivation of bacteria with the assistance of PMS, which was expected to provide some insights into the practical treatment of drinking water.

Fit and forget: The future of dental implant therapy via nanotechnology

Unlike orthopedic implants, dental implants require the orchestration of both osseointegration at the bone-implant interface and soft-tissue integration at the transmucosal region in a complex oral micro-environment with ubiquitous pathogenic bacteria. This represents a very challenging environment for early acceptance and long-term survival of dental implants, especially in compromised patient conditions, including aged, smoking and diabetic patients. Enabling advanced local therapy from the surface of titanium-based dental implants via novel nano-engineering strategies is emerging. This includes anodized nano-engineered implants eluting growth factors, antibiotics, therapeutic nanoparticles and biopolymers to achieve maximum localized therapeutic action. An important criterion is balancing bioactivity enhancement and therapy (like bactericidal efficacy) without causing cytotoxicity. Critical research gaps still need to be addressed to enable the clinical translation of these therapeutic dental implants. This review informs the latest developments, challenges and future directions in this domain to enable the successful fabrication of clinically-translatable therapeutic dental implants that would allow for long-term success, even in compromised patient conditions.

Role of bioactive magnetic nanoparticles in the prevention of wound pathogenic biofilm formation using smart nanocomposites

BACKGROUND

Biofilm formation and its resistance to various antibiotics is a serious health problem in the treatment of wound infections. An ideal wound dressing should have characteristics such as protection of wound from microbial infection, suitable porosity (to absorb wound exudates), proper permeability (to maintain wound moisture), nontoxicity, and biocompatibility. Although silver nanoparticles (AgNPs) have been investigated as antimicrobial agents, their limitations in penetrating into the biofilm, affecting their efficiency, have consistently been an area for further research.

RESULTS

Consequently, in this study, the optimal amounts of natural and synthetic polymers combination, along with AgNPs, accompanied by iron oxide nanoparticles (IONPs), were utilized to fabricate a smart bionanocomposite that meets all the requirements of an ideal wound dressing. Superparamagnetic IONPs (with the average size of 11.8 nm) were synthesized through co-precipitation method using oleic acid to improve their stability. It was found that the addition of IONPs to bionanocomposites had a synergistic effect on their antibacterial and antibiofilm properties. Cytotoxicity assay results showed that nanoparticles does not considerably affect eukaryotic cells compared to prokaryotic cells. Based on the images obtained by confocal laser scanning microscopy (CLSM), significant AgNPs release was observed when an external magnetic field (EMF) was applied to the bionanocomposites loaded with IONPs, which increased the antibacterial activity and inhibited the formation of biofilm significantly.

CONCLUSION

These finding indicated that the nanocomposite recommended can have an efficient properties for the management of wounds through prevention and treatment of antibiotic-resistant biofilm.

Craniofacial therapy: advanced local therapies from nano-engineered titanium implants to treat craniofacial conditions

Nano-engineering-based tissue regeneration and local therapeutic delivery strategies show significant potential to reduce the health and economic burden associated with craniofacial defects, including traumas and tumours. Critical to the success of such nano-engineered non-resorbable craniofacial implants include load-bearing functioning and survival in complex local trauma conditions. Further, race to invade between multiple cells and pathogens is an important criterion that dictates the fate of the implant. In this pioneering review, we compare the therapeutic efficacy of nano-engineered titanium-based craniofacial implants towards maximised local therapy addressing bone formation/resorption, soft-tissue integration, bacterial infection and cancers/tumours. We present the various strategies to engineer titanium-based craniofacial implants in the macro-, micro- and nano-scales, using topographical, chemical, electrochemical, biological and therapeutic modifications. A particular focus is electrochemically anodised titanium implants with controlled nanotopographies that enable tailored and enhanced bioactivity and local therapeutic release. Next, we review the clinical translation challenges associated with such implants. This review will inform the readers of the latest developments and challenges related to therapeutic nano-engineered craniofacial implants.

An Overview of Recent Developments in Improving the Photocatalytic Activity of TiO2-Based Materials for the Treatment of Indoor Air and Bacterial Inactivation

Indoor air quality has become a significant public health concern. The low cost and high efficiency of photocatalytic technology make it a natural choice for achieving deep air purification. Photocatalysis procedures have been widely investigated for environmental remediation, particularly for air treatment. Several semiconductors, such as TiO₂, have been used for photocatalytic purposes as catalysts, and they have earned a lot of interest in the last few years owing to their outstanding features. In this context, this review has collected and discussed recent studies on advances in improving the photocatalytic activity of TiO₂-based materials for indoor air treatment and bacterial inactivation. In addition, it has elucidated the properties of some widely used TiO₂-based catalysts and their advantages in the photocatalytic process as well as improved photocatalytic activity using doping and heterojunction techniques. Current publications about various combined catalysts have been summarized and reviewed to emphasize the significance of combining catalysts to increase air treatment efficiency. Besides, this paper summarized works that used these catalysts to remove volatile organic compounds (VOCs) and microorganisms. Moreover, the reaction mechanism has been described and summarized based on literature to comprehend further pollutant elimination and microorganism inactivation using photocatalysis. This review concludes with a general opinion and an outlook on potential future research topics, including viral disinfection and other hazardous gases.

Novel cubical Ag(NP) decorated titanium dioxide supported bentonite thin film in the efficient removal of bisphenol A using visible light

The persistent endocrine-disrupting chemical bisphenol A is posing serious health concerns; hence, it is known to be an emerging and potential water contaminant. The present investigation aims to synthesize novel cubical Ag(NP) decorated titanium dioxide-supported bentonite (Ag/TiO₂@Clay) nanocomposite using a novel synthetic process. The nanocomposite materials were characterized by several analytical methods viz., transmission electron microscopy (TEM), X-ray diffraction (XRD) analyses, energy-dispersive X-ray spectroscopy (EDX), atomic force microscopy (AFM), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) and diffuse reflectance spectroscopy (DRS). Further, the photocatalytic removal of bisphenol A was conducted utilizing the thin film catalyst under the LED (light emitting diode; visible light) and UV-A (ultra violet-A) light sources. The parametric studies solution pH (6.0-12.0), pollutant concentrations (1.0-20.0 mg/L), and the interaction of several scavengers and co-existing ions are studied extensively to demonstrate the insights of the removal mechanism. The mineralization of bisphenol A and repeated use of the thin film catalyst showed the potential usage of photocatalysts in the devised large-scale operations. Similarly, the natural matrix treatment was performed to evaluate the suitability of the process for real implications.

Modification of Liquid Separation Membranes Using Multidimensional Nanomaterials: Revealing the Roles of Dimension Based on Classical Titanium Dioxide

Membrane technology has become increasingly popular and important for separation processes in industries, as well as for desalination and wastewater treatment. Over the last decade, the merger of nanotechnology and membrane technology in the development of nanocomposite membranes has emerged as a rapidly expanding research area. The key motivation driving the development of nanocomposite membranes is the pursuit of high-performance liquid separation membranes that can address the bottlenecks of conventionally used polymeric membranes. Nanostructured materials in the form of zero to three-dimensions exhibit unique dimension-dependent morphology and topology that have triggered considerable attention in various fields. While the surface hydrophilicity, antibacterial, and photocatalytic properties of TiO₂ are particularly attractive for liquid separation membranes, the geometry-dependent properties of the nanocomposite membrane can be further fine-tuned by selecting the nanostructures with the right dimension. This review aims to provide an overview and comments on the state-of-the-art modifications of liquid separation membrane using TiO₂ as a classical example of multidimensional nanomaterials. The performances of TiO₂-incorporated nanocomposite membranes are discussed with attention placed on the special features rendered by their structures and dimensions. The innovations and breakthroughs made in the synthesis and modifications of structure-controlled TiO₂ and its composites have enabled fascinating and advantageous properties for the development of high-performance nanocomposite membranes for liquid separation.

Effect of experimental parameters on photocatalytic degradation efficiency of TiO2 nanoparticles synthesized by electrochemical method towards Rhodamine B dye solution under natural sunlight

In this study, ~ 40 nm anatase TiO₂ nanoparticles were successfully prepared by a simple electrochemical method by using succinic acid as a non-ammonia-based electrolyte solution and titanium sheets as electrodes. The effect of experimental parameters such as conductivity (2-12 mS/cm), pH of the initial solution (5-9), current applied (0.05-2 A), and reaction time (1-4 h) on catalyst productivity has been investigated. The analysis shows that at an optimum conductivity of 8 mS/cm and pH 7, an increase in applied current and reaction time maximizes the productivity of TiO₂ nanoparticles. The obtained catalyst was used for photocatalytic degradation of rhodamine B (RhB) under natural sunlight irradiation. The effect of experimental parameters on photocatalytic degradation has also been studied. The result displayed that degradation efficiency was enhanced by ~ 3 times in the alkaline region compared to the normal pH condition and increased with an increase in catalyst loading and decreased with the initial concentration of RhB dye. Investigation of the photocatalytic mechanism by radical trapping experiments showed that RhB photocatalytic degradation was mainly dominated by hole and superoxide radicals, whereas hydroxyl radical plays a minor role. Moreover, the catalyst reusability analysis revealed good stability and showed excellent degradation up to four consecutive cycles with nearly negligible loss of photocatalytic efficiency. Thus, the present work offers a new opportunity in terms of maximization of productivity as well as sunlight-driven photocatalytic activity of the catalyst for their industrial application.

Photoelectrochemical properties and reactivity of supported titanium NTs for bacterial inactivation and organic pollutant removal

In this work, we report on the effect of anodization time on the morphology, optical, and photocatalytic properties of TiO₂ nanotubes (NTs) allowing bacterial inactivation and two organic pollutant degradation under low-intensity solar-simulated light. Scanning electron microscopy (SEM) showed that the length of the TiO₂ NTs increased from 2.8 to 25.8 μm as anodization time was increased from 15 to 300 min at 60 V, respectively. The X-ray diffraction (XRD) patterns showed that all samples crystallize in the anatase phase after annealing at 400 °C for 3 h. Samples anodized for 30 and 60 min exhibit low diffuse reflection at 400 nm, which was attributed to the disorder-induced exciton scattering at the molecular level. The intensity of the photoluminescence (PL) spectra was found to increase as the length of the NTs increases up to a maximum anodization time of 300 min, revealing the contribution of bulk excitonic states. A maximum photoelectric conversion efficiency of 0.55% was obtained at a potential of - 0.5 V vs. Ag/AgCl for TiO₂ NTs anodized for 60 min. The optimized NTs (anodized for 60 min) showed a photocatalytic bacterial inactivation of a magnitude of 6 log within 360 min and a degradation of indole and methylene blue (MB) under low-intensity solar-simulated light (50 mW/cm²). The stability of the prepared catalyst was tested over several cycles.

Inactivation of SARS-CoV-2 and Other Human Coronaviruses Aided by Photocatalytic One-Dimensional Titania Nanotube Films as a Self-Disinfecting Surface

SARS-CoV-2 and its variants that continue to emerge have necessitated the implementation of effective disinfection strategies. Developing self-disinfecting surfaces can be a potential route for reducing fomite transmissions of infectious viruses. We show the effectiveness of TiO₂ nanotubes (T_NTs) on photocatalytic inactivation of human coronavirus, HCoV-OC43, as well as SARS-CoV-2. T_NTs were synthesized by the anodization process, and their impact on photocatalytic inactivation was evaluated by the detection of residual viral genome copies (quantitative real-time quantitative reverse transcription polymerase chain reaction) and infectious viruses (infectivity assays). T_NTs with different structural morphologies, wall thicknesses, diameters, and lengths were prepared by varying the time and applied potential during anodization. The virucidal efficacy was tested under different UV-C exposure times to understand the photocatalytic reaction's kinetics. We showed that the T_NT presence boosts the inactivation process and demonstrated complete inactivation of SARS-CoV-2 as well as HCoV-OC43 within 30 s of UV-C illumination. The remarkable cyclic stability of these T_NTs was revealed through a reusability experiment. The spectroscopic and electrochemical analyses have been reported to correlate and quantify the effects of the physical features of T_NT with photoactivity. We anticipate that the proposed one-dimensional T_NT will be applicable for studying the surface inactivation of other coronaviruses including SARS-CoV-2 variants due to similarities in their genomic structure.

Preparation and modification methods of defective titanium dioxide-based nanoparticles for photocatalytic wastewater treatment-a comprehensive review

The rapid population growth and industrial expansion worldwide have created serious water contamination concerns. To curb the pollution issue, it has become imperative to use a versatile material for the treatment. Titanium dioxide (TiO₂) has been recognized as the most-studied nanoparticle in various fields of science and engineering due to its availability, low cost, efficiency, and other fascinating properties with a wide range of applications in modern technology. Recent studies revealed the photocatalytic activity of the material for the treatment of industrial effluents to promote environmental sustainability. With the wide band gap energy of 3.2 eV, TiO₂ can be activated under UV light; thus, many strategies have been proposed to extend its photoabsorption to the visible light region. In what follows, this has generated increasing attention to study its characteristics and structural modifications in different forms for photocatalytic applications. The present review provides an insight into the understanding of the synthesis methods of TiO₂, the current progress in the treatment techniques for the degradation of wide environmental pollutants employing modified TiO₂ nanoparticles, and the factors affecting its photocatalytic activities. Further, recent developments in using titania for practical applications, the approach for designing novel nanomaterials, and the prospects and opportunities in this exciting area have been discussed.

Preparation, Antimicrobial Properties under Different Light Sources, Mechanisms and Applications of TiO2: A Review

Traditional antimicrobial methods, such as antibiotics and disinfectants, may cause adverse effects, such as bacterial resistance and allergic reactions. Photocatalysts based on titanium dioxide (TiO₂) have shown great potential in the field of antimicrobials because of their high efficiency, lack of pollution, and lack of side effects. This paper focuses on the antimicrobial activity of TiO₂ under different light sources. To improve the photocatalytic efficiency of TiO₂, we can reduce electron-hole recombination and extend the photocatalytic activity to the visible light region by doping with different ions or compounds and compounding with polymers. We can also improve the surface properties of materials, increase the contact area with microorganisms, and further enhance the resistance to microorganisms. In addition, we also reviewed their main synthesis methods, related mechanisms, and main application fields to provide new ideas for the enhancement of photocatalytic microorganism performance and application popularization in the future.

Noble metal-doped TiO2 thin films in the efficient removal of Mordant Orange-1: insights of degradation process

Nanocomposite Ag⁰(NPs)/TiO₂ is synthesised in a facile template method enabling nanoparticles of reduced Ag evenly distributed within the titania network. The morphological studies of nanocomposites were extensively performed employing SEM/EDX (scanning electron microscopy/energy dispersive X-ray), TEM (transmission electron microscopy) and AFM (atomic force microscopy). Moreover, the bandgap energies of materials were obtained using the diffuse reflectance spectrometer (DRS). The newer insights in the photocatalytic elimination of Mordant Orange-1 (MO1) was obtained using the nanocomposite thin film for various parametric studies utilising the UV-A and LED illuminations. The kinetics of degradation of MO1 was performed, and the rate constant was favoured at lower concentrations of MO1. Moreover, the elimination efficiency of MO1 was favoured with a decrease in solution pH. The NPOC results inferred that a fairly good extent of MO1 was mineralised using a thin-film catalyst for both the UV-A and LED illuminations. The minimal effect of several co-ions demonstrated the applicability of thin films in the elimination of MO1, and the stability of the thin film has shown the potential applicability of thin-film catalysts. Further, the mechanism of photocatalytic degradation was demonstrated with the radical scavenger studies and ascertained the reaction pathways.

Advances and Prospects in Antibacterial-Osteogenic Multifunctional Dental Implant Surface

In recent years, dental implantation has become the preferred protocol for restoring dentition defects. Being the direct contact between implant and bone interface, osseointegration is the basis for implant exerting physiological functions. Nevertheless, biological complications such as insufficient bone volume, poor osseointegration, and postoperative infection can lead to implant failure. Emerging antibacterial-osteogenic multifunctional implant surfaces were designed to make up for these shortcomings both during the stage of forming osseointegration and in the long term of supporting the superstructure. In this mini-review, we summarized the recent antibacterial-osteogenic modifications of the dental implant surface. The effects of these modifications on biological performance like soft tissue integration, bone osteogenesis, and immune response were discussed. In addition, the clinical findings and prospects of emerging antibacterial-osteogenic implant materials were also discussed.

Enhanced performance of photocatalytic treatment of Congo red wastewater by CNTs-Ag-modified TiO2 under visible light

In order to improve the treatment efficiency of printing and dyeing wastewater, the carbon nanotubes-silver-modified-titanium dioxide (CNTs-Ag-TiO₂, CAT) ternary composite was prepared by a mechanical mixing method. It was found that the morphology of the prepared CAT sample was uniformly coated with strips of CNTs, speckled Ag, and lumpy TiO₂. The (002) crystal plane of CNTs, the (101) crystal plane of TiO₂, and the (111) crystal plane of Ag were observed, which possessed functional groups such as Ti-OH and Ti-O-C, indicating that the prepared CAT sample had photocatalytic reaction sites. The visible light utilization of titanium dioxide can be improved. The treatment effect of different proportions of CNTs-Ag-TiO₂ on Congo red wastewater was tested, and the results showed that the optimum degradation effect of Congo red wastewater was CNTs: Ag = 10:1, and the doped amount of CNTs/Ag was 15%, and the removal rate of Congo red wastewater could reach 100% within 140 min. The excellent removal effect of CAT ternary composite on Congo red wastewater provided a new idea and way for the modification of TiO₂ and its composites for the potential of organic dyes degradation.

Preparation of molecularly imprinted Ag-TiO2 for photocatalytic removal of ethyl paraben

Herein, MI-Ag-TiO₂ was prepared by one-step sol-gel method, and its photocatalytic and characterization performance were fully analyzed. Within 120 min, the photocatalytic degradation rate of MI-Ag-TiO₂ to ethyl paraben was 93.4%, which was 1.48 times that of naked TiO₂. Compared with Ag-TiO₂, MI-TiO₂, and TiO₂, the photocatalytic selectivity of MI-Ag-TiO₂ to target pollutants increased by 24.5%, 31.5%, and 100%, respectively. Hence, the one-step molecular imprinting method can simply and quickly improve the photocatalytic performance of TiO₂. This research may help to further promote the practical application of molecularly imprinted photocatalysts in the future.

Recent advances in photocatalytic remediation of emerging organic pollutants using semiconducting metal oxides: an overview

Many untreated and partly treated wastewater from the home and commercial resources is being discharged into the aquatic environment these days, which contains numerous unknown and complex natural and inorganic compounds. These compounds tend to persist, initiating severe environmental problems, which affect human health. Conventionally, physicochemical treatment methods were adopted to remove such complex organic chemicals, but they suffer from critical limitations. Over time, photocatalysis, an advanced oxidation process, has gained its position for its efficient and fair performance against emerging organic pollutant decontamination. Typically, photocatalysis is a green technology to decompose organics under UV/visible light at ambient conditions. Semiconducting nanometal oxides have emerged as pioneering photocatalysts because of large active surface sites, flexible oxidation states, various morphologies, and easy preparation. The current review presents an overview of emerging organic pollutants and their effects, advanced oxidation processes, photocatalytic mechanism, types of photocatalysts, photocatalyst support materials, and methods for improving photodegradation efficiency on the degradation of complex emerging organic pollutants. In addition, the recent reports of metal-oxide-driven photocatalytic remediation of emerging organic pollutants are presented in brief. This review is anticipated to reach a broader scientific community to understand the first principles of photocatalysis and review the recent advancements in this field.

Synthesis and Characterization of TiO2 Nanotubes (TiO2-NTs) Decorated with Platine Nanoparticles (Pt-NPs): Photocatalytic Performance for Simultaneous Removal of Microorganisms and Volatile Organic Compounds

This work reports on the effect of TiO₂ nanotubes (TiO₂-NTs), decorated wih platinum nanoparticles (Pt-NPs), on the removal of bacteria and volatile organic compounds (VOCs). The Pt-NPs were loaded onto the TiO₂-NTs using the electrodeposition method at four decoration times (100, 200, 300, and 600 s). The realized Pt-NPs/TiO₂-NTs nanocomposites were used for the degradation of cyclohexane, a highly toxic and carcinogenic VOC pollutant in the chemical industry. The achieved Pt-NPs/TiO₂-NTs nanocomposites were characterized using X-ray diffraction (XRD), photoluminescence (PL), diffuse reflectance spectroscopy (UV–Vis), and scanning (SEM) and transmission (TEM) electron microscopy. To understand the photocatalytic and antibacterial behavior of the Pt-NPs/TiO₂-NTs, simultaneous treatment of Escherichia coli and cyclohexane was conducted while varying the catalyst time decoration. We noticed a complete bacterial inactivation rate with 90% VOC removal within 60 min of visible light irradiation. Moreover, the Langmuir–Hinshelwood model correlated well with the experimental results of the photocatalytic treatment of indoor air.

Floating Carbon-Doped TiO2 Photocatalyst with Metallic Underlayers Investigation for Polluted Water Treatment under Visible-Light Irradiation

In the current study, we analysed the influence of metallic underlayers on carbon-doped TiO2 films for RhB decomposition and Salmonella typhimurium inactivation under visible-light irradiation. All the experiments were divided into two parts. First, layered M/C-doped-TiO2 film structures (M = Ni, Nb, Cu) were prepared by magnetron sputtering technique on borosilicate glass substrates in the two-step deposition process. The influence of metal underlayer on the formation of the carbon-doped TiO2 films was characterised by X-ray diffractometer, scanning electron microscope, and atomic force microscope. The comparison between the visible-light assisted photocatalytic activity of M/C-doped TiO2 structures was performed by the photocatalytic bleaching tests of Rhodamine B dye aqueous solution. The best photocatalytic performance was observed for Ni/C-doped-TiO2 film combination. During the second part of the study, the Ni/C-doped-TiO2 film combination was deposited on high-density polyethylene beads which were selected as a floating substrate. The morphology and surface chemical analyses of the floating photocatalyst were performed. The viability and membrane permeability of Salmonella typhimurium were tested in cycling experiments under UV-B and visible-light irradiation. Three consecutive photocatalytic treatments of fresh bacteria suspensions with the same set of floating photocatalyst showed promising results, as after the third 1 h-long treatment bacteria viability was still reduced by 90% and 50% for UV-B and visible-light irradiation, respectively. The membrane permeability and ethidium fluorescence results suggest that Ni underlayer might have direct and indirect effect on the bacteria inactivation process. Additionally, relatively low loss of the photocatalyst efficiency suggests that floating C-doped TiO2 photocatalyst with the Ni underlayer might be seen as the possible solution for the used photocatalyst recovery issue.

Multi-scale hybrid modified coatings on titanium implants for non-cytotoxicity and antibacterial properties

Titanium and its alloys are among the widely used materials in the biomedical field, but they have poor wear resistance and antibacterial properties. In the present study, anodization, photo-reduction, and spin-coating technologies were integrated to prepare a hybrid modified coating for bio-inert titanium implants, having excellent comprehensive performance. The surface roughness of Ti-35Nb-2Ta-3Zr was specifically optimized by surface modification leading to improved wear resistance. Ag ions are still detectable after 28 days of submersion in saline. The antibacterial rate of the composite coating group reaches 100% by plate counting due to the antibacterial mechanism of direct and indirect contact. Both bacteria morphology and fluorescence staining experiments confirm these results. Besides, no cytotoxicity was detected in our fabricated implants during the CCK-8 assay. Accordingly, fabrication of hybrid modified coatings on Ti-35Nb-2Ta-3Zr is an effective strategy for infection and cytotoxicity prevention. These hybrid modified coatings can be regarded as promising multifunctional biomaterials.

Understanding and optimizing the antibacterial functions of anodized nano-engineered titanium implants

Nanoscale surface modification of titanium-based orthopaedic and dental implants is routinely applied to augment bioactivity, however, as is the case with other cells, bacterial adhesion is increased on nano-rough surfaces. Electrochemically anodized Ti implants with titania nanotubes (TNTs) have been proposed as an ideal implant surface with desirable bioactivity and local drug release functions to target various conditions. However, a comprehensive state of the art overview of why and how such TNTs-Ti implants acquire antibacterial functions, and an in-depth knowledge of how topography, chemistry and local elution of potent antibiotic agents influence such functions has not been reported. This review discusses and details the application of nano-engineered Ti implants modified with TNTs for maximum local antibacterial functions, deciphering the interdependence of various characteristics and the fine-tuning of different parameters to minimize cytotoxicity. An ideal implant surface should cater simultaneously to ossoeintegration (and soft-tissue integration for dental implants), immunomodulation and antibacterial functions. We also evaluate the effectiveness and challenges associated with such synergistic functions from modified TNTs-implants. Particular focus is placed on the metallic and semi-metallic modification of TNTs towards enabling bactericidal properties, which is often dose dependent. Additionally, there are concerns over the cytotoxicity of these therapies. In that light, research challenges in this domain and expectations from the next generation of customizable antibacterial TNTs implants towards clinical translation are critically evaluated. STATEMENT OF SIGNIFICANCE: One of the major causes of titanium orthopaedic/dental implant failure is bacterial colonization and infection, which results in complete implant failure and the need for revision surgery and re-implantation. Using advanced nanotechnology, controlled nanotopographies have been fabricated on Ti implants, for instance anodized nanotubes, which can accommodate and locally elute potent antibiotic agents. In this pioneering review, we shine light on the topographical, chemical and therapeutic aspects of antibacterial nanotubes towards achieving desirable tailored antibacterial efficacy without cytotoxicity concerns. This interdisciplinary review will appeal to researchers from the wider scientific community interested in biomaterials science, structure and function, and will provide an improved understanding of controlling bacterial infection around nano-engineered implants, aimed at bridging the gap between research and clinics.

Recent advances in functionalized nanomaterials for the diagnosis and treatment of bacterial infections

The growing problem of resistant infections due to antibiotic misuse is a worldwide concern that poses a grave threat to healthcare systems. Thus, it is necessary to discover new strategies to combat infectious diseases. In this review, we provide a selective overview of recent advances in the use of nanocomposites as alternatives to antibiotics in antimicrobial treatments. Metals and metal oxide nanoparticles (NPs) have been associated with inorganic and organic supports to improve their antibacterial activity and stability as well as other properties. For successful antibiotic treatment, it is critical to achieve a high drug concentration at the infection site. In recent years, the development of stimuli-responsive systems has allowed the vectorization of antibiotics to the site of infection. These nanomaterials can be triggered by various mechanisms (such as changes in pH, light, magnetic fields, and the presence of bacterial enzymes); additionally, they can improve antibacterial efficacy and reduce side effects and microbial resistance. To this end, various types of modified polymers, lipids, and inorganic components (such as metals, silica, and graphene) have been developed. Applications of these nanocomposites in diverse fields ranging from food packaging, environment, and biomedical antimicrobial treatments to diagnosis and theranosis are discussed.

Silver-Deposited Nanoparticles on the Titanium Nanotubes Surface as a Promising Antibacterial Material into Implants

The main disadvantage of the implants is the associated infections. Therefore, in the long term, the possibility of improving the antibacterial capacity of different types of implants (dental, orthopedic) is being researched. The severity of the problem lies in the increasing bacterial resistance and finding appropriate alternative treatments for infectious diseases, which is an important research field nowadays. The purpose of this review is to draw a parallel between different studies analyzing the antibacterial activity and mechanism of silver nanoparticles (NP Ag) deposited on the titanium nanotubes (NTT), as well as the analysis of the NP Ag toxicity. This review also provides an overview of the synthesis and characterization of TiO2-derived nanotubes (NT). Thus, the analysis aims to present the existing knowledge to better understand the NP Ag implants benefits and their antibacterial activity.

Photodegradation of gaseous toluene and disinfection of airborne microorganisms from polluted air using immobilized TiO2 nanoparticle photocatalyst-based filter

Photocatalytic oxidation (PCO) has been described as an advanced technology to remove toxic volatile organic compounds (VOCs) and airborne microorganisms from indoor air environments. This technique is economic, stable, safe, and capable to remove a wide variety of organic contaminants under UV irradiation. This study presents a case study on the effect of a fabricated filter in the removal of toluene at 26 mg/L and disinfection of ambient air under a given operating condition. The principal goals of this study were to synthesize Ag nanoparticles/TiO₂ filter for the first time via the deposition of Ag nanoparticles on a commercial immobilized TiO₂ tissue sheet by impregnation technique and to investigate the performance of this prepared Ag/TiO₂ tissue based filter system for toluene removal as well as to remove airborne microorganisms from indoor air. The results illustrated that under the experimental conditions, Ag/TiO₂-based filter was able to disinfect well the microorganisms. The performance of Ag/TiO₂ filter shows two different stages; the first one is a slight adsorption phase in dark with approximately 15% of toluene removal within 60 min. The second stage is a photooxidation phase under UV irradiation in which the toluene removal efficiency was significantly enhanced with extension of the operational time and reached 97% during this stage. Additionally, the Ag/TiO₂ filter has a higher disinfection capacity of airborne microorganisms that completely removed to reach 100% after 300 min of application. This filter could be practically introduced as an effective system in industrial, hospital, and home applications for air purification. Graphical abstract.

Reduced bacterial adhesion on zirconium-based bulk metallic glasses by femtosecond laser nanostructuring

As high-performing materials, bulk metallic glasses have attracted widespread attention for biomedical applications. Herein, the bacterial adhesion properties of femtosecond laser-nanostructured surfaces of four types of zirconium-based bulk metallic glasses are assessed. Laser-induced periodical surface structures and nanoparticle structures were fabricated by femtosecond laser irradiation under different energy intensities (0.23 and 2.3 J/mm2). Surface topography, roughness, wettability, and surface energy were investigated after femtosecond laser irradiation and the surface bacterial adhesion properties were explored using Escherichia coli and Staphylococcus aureus as respective representatives of Gram-negative and Gram-positive bacteria. 4',6-Diamidino-2-phenylindole fluorescence staining was used to characterize and assess the bacterial surface coverage rate. The in vitro cytotoxicity of polished and laser-nanostructured surfaces was investigated using MC3T3-E cells. The obtained results demonstrate that femtosecond laser surface nanostructuring retained the amorphous structure of zirconium-based bulk metallic glasses and led to an obvious decrease in bacterial adhesion compared with polished surfaces. The inhibition of bacterial adhesion on laser-induced periodical surface structures was greater than on nanostructured surfaces after 24 h of bacterial incubation. In addition, femtosecond laser nanostructuring did not have an apparent effect on the cytotoxicity of zirconium-based bulk metallic glasses.

Electrophoretic Deposition and Characteristics of Chitosan–Nanosilver Composite Coatings on a Nanotubular TiO2 Layer

The surface treatment of titanium implants has been applied mainly to increase surface bioactivity and, more recently, to introduce antibacterial properties. To this end, composite coatings have been investigated, particularly those based on hydroxyapatite. The present research was aimed at the development of another coating type, chitosan–nanosilver, deposited on a Ti13Zr13Nb alloy. The research comprised characterization of the coating’s microstructure and morphology, time-dependent nanosilver dissolution in simulated body fluid, and investigation of the nanomechanical properties of surface coatings composed of chitosan and nanosilver, with or without a surface-active substance, deposited at different voltages for 1 min on a nanotubular TiO2 layer. The microstructure, morphology, topography, and phase composition were examined, and the silver dissolution rate in simulated body fluid, nanoscale mechanical properties, and water contact angle were measured. The voltage value significantly influenced surface roughness. All specimens possessed high biocompatibility. The highest and best adhesion of the coatings was observed in the absence of a surface-active substance. Silver dissolution caused the appearance of silver ions in solution at levels effective against bacteria and below the upper safe limit value.

Visible-Light Active Titanium Dioxide Nanomaterials with Bactericidal Properties

This article provides an overview of current research into the development, synthesis, photocatalytic bacterial activity, biocompatibility and cytotoxic properties of various visible-light active titanium dioxide (TiO2) nanoparticles (NPs) and their nanocomposites. To achieve antibacterial inactivation under visible light, TiO2 NPs are doped with metal and non-metal elements, modified with carbonaceous nanomaterials, and coupled with other metal oxide semiconductors. Transition metals introduce a localized d-electron state just below the conduction band of TiO2 NPs, thereby narrowing the bandgap and causing a red shift of the optical absorption edge into the visible region. Silver nanoparticles of doped TiO2 NPs experience surface plasmon resonance under visible light excitation, leading to the injection of hot electrons into the conduction band of TiO2 NPs to generate reactive oxygen species (ROS) for bacterial killing. The modification of TiO2 NPs with carbon nanotubes and graphene sheets also achieve the efficient creation of ROS under visible light irradiation. Furthermore, titanium-based alloy implants in orthopedics with enhanced antibacterial activity and biocompatibility can be achieved by forming a surface layer of Ag-doped titania nanotubes. By incorporating TiO2 NPs and Cu-doped TiO2 NPs into chitosan or the textile matrix, the resulting polymer nanocomposites exhibit excellent antimicrobial properties that can have applications as fruit/food wrapping films, self-cleaning fabrics, medical scaffolds and wound dressings. Considering the possible use of visible-light active TiO2 nanomaterials for various applications, their toxicity impact on the environment and public health is also addressed.

Antibacterial properties of silver nanoparticles grown in situ and anchored to titanium dioxide nanotubes on titanium implant against Staphylococcus aureus

Medical grade titanium alloy, Ti-6Al-4V, with TiO₂ nanotubes (TiO₂-NTs) grown on the surface and then decorated with silver nanoparticles (Ag NPs) is proposed to enhance the antimicrobial properties of the bone/dental implants. However, the decoration with Ag NPs is not consistent and there are concerns about the direct contact of Ag NPs with human tissue. The aim of this study was to achieve a more even coverage of Ag NPs on TiO₂-NTs and determine their biocidal properties against Staphylococcus aureus, with and without a top coat of nano hydroxyapatite (nHA). The decoration with Ag NPs was optimised by adjusting the incubation time of the TiO₂-NTs in a silver ammonia solution, and using biocompatible δ-gluconolactone as a reducing agent. The optimum incubation in silver ammonia was 7 min, and resulted in evenly distributed Ag NPs with an average diameter of 47.5 ± 1.7 nm attached to the surface of the nanotubes. The addition of nHA did not compromise the antimicrobial properties of the materials; high-resolution electron microscopy showed S. aureus did not grow on the composite with nHA and with >80% biocidal activity measured by the LIVE/DEAD assay, also limited lactate production. Dialysis experiment confirmed the stability of the coatings, and showed a slow release of dissolved silver (3.27 ± 0.15 μg/L over 24 h) through the top coat of nHA.