Reusable anionic sulfonate functionalized nanofibrous membranes for cellulase enzyme adsorption and separation

Advances in high-throughput, high-capacity nonwoven membranes for chromatography in downstream processing: A review

Nonwoven membranes are highly engineered fibrous materials that can be manufactured on a large scale from a wide range of different polymers, and their surfaces can be modified using a large variety of different chemistries and ligands. The fiber diameters, surface areas, pore sizes, total porosities, and thicknesses of the nonwoven mats can be carefully controlled, providing many opportunities for creative approaches for the development of novel membranes with unique properties to meet the needs of the future of downstream processing. Fibrous membranes are already finding use in ultrafiltration, microfiltration, depth filtration, and, more recently, in membrane chromatography for product capture and impurity removal. This article summarizes the various methods of manufacturing nonwoven fabrics, and the many methods available for the modification of the fiber surfaces. It also reviews recent studies focused on the use of nonwoven fabric devices in membrane chromatography and provides some perspectives on the challenges that need to be overcome to increase binding capacities, decrease residence times, and reduce pressure drops so that eventually they can replace resin column chromatography in downstream process operations.

A label-free electrochemical immunosensor based on decorated cellulose nanofibrous membrane for point-of-care diagnosis of amanitin poisoning via human urine

α-Amanitin (AMN) is one of the deadliest toxins from mushrooms, present in the deadly mushroom species Amanita phalloides. It is a bicyclic octapeptide and represents up to 40% of the amatoxins in mushrooms, damaging the liver and kidneys. Current methods of detecting amatoxins are time-consuming and require the use of expensive equipment. A novel label-free electrochemical immunosensor was successfully developed for rapid detection of α-amanitin, which was fabricated by immobilization of anti-α-amanitin antibodies onto a functionalized cellulose nanofibrous membrane-modified carbon screen-printed electrode. An oxidation peak of the captured amanitin on the tethered antibodies was observed at 0.45 V. The performance of the nanofibrous membrane on the electrode and necessary fabrication steps were investigated by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). Due to its unique structural features and properties such as high specific surface area and microporous structure, the nanofibrous membrane as an immunosensor matrix for antibody tethering improved the electrochemical performance of the immunosensor by more than 3 times compared with cast membranes. Under the optimal conditions, the assembled immunosensor exhibited high sensitivity toward α-amanitin detection in the range of 0.009-2 ng mL-1 with a limit of detection of 8.3 pg mL-1. The results clearly indicate that the fabricated nanofiber-based-immunosensor is suitable for point-of-care detection of lethal α-amanitin in human urine without any pretreatment within 30 min.

Cationic microcrystalline cellulose - Montmorillonite composite aerogel for preconcentration of inorganic anions from dairy wastewater

Development of efficient adsorbents to inorganic anions as a solid phase extraction (SPE) material is highly desirable for chromatographic analysis and pollution control. In this work we developed a new hybrid cationic microcrystalline cellulose aerogel composite. Cationic cetylpyridinium imbedded montmorillonite (CPC-MT) was uniformly entrapped in microcrystalline cellulose (MCC) to enhance anionic adsorption efficiency and mechanical stability. The developed CPC-MT@MCC aerogel was used as an SPE adsorbent for anions from dairy wastewater by coupling with ion-column chromatography. Further quaternized CPC-MT@MCC aerogel (CPC-MT@QMCC) showed unique low density (10.6 mg cm^-3), large specific surface area (320 m² g^-1), porosity 70%, 800 mg g^-1 nitrate adsorption capacity within 60 min and ease of elution in alkaline solutions. The CPC-MT@QMCC aerogel showed efficient regeneration and reuse performances for up to 10 cycles. More importantly, a dynamic binding efficiency of 710 mg g^-1 highlights its excellent performance for practical applications. 96% of nitrate anion from environmental manure wastewater samples were adsorbed with 98.7% recovery. A good linear relationship was obtained in the range of 0.01-10 mg L^-1 and the limits of detection was 0.5 mg L^-1 using CPC-MT@QMCC aerogel as a preconcentration column. The successful synthesis of such intriguing and economic CPC-MT@QMCC aerogel may provide a promising matrix for high-performance and high efficiency chromatographic media.

Recent advances in carbon nanotubes-based biocatalysts and their applications

Enzymes have been incorporated into a wide variety of fields and industries as they catalyze many biochemical and chemical reactions. The immobilization of enzymes on carbon nanotubes (CNTs) for generating nano biocatalysts with high stability and reusability is gaining great attention among researchers. Functionalized CNTs act as excellent support for effective enzyme immobilization. Depending on the application, the enzymes can be tailored using the various surface functionalization techniques on the CNTs to extricate the desirable characteristics. Aiming at the preparation of efficient, stable, and recyclable nanobiocatalysts, this review provides an overview of the methods developed to immobilize the various enzymes. Various applications of carbon nanotube-based biocatalysts in water purification, bioremediation, biosensors, and biofuel cells have been comprehensively reviewed.

Rapid removal of Cr(III) from high-salinity wastewater by cellulose-g-poly-(acrylamide-co-sulfonic acid) polymeric bio-adsorbent

A cellulose-g-poly-(acrylamide-co-sulfonic acid) polymeric bio-adsorbent (CASA) was prepared by grafting copolymerization, and used to adsorb Cr(III) from leather wastewater. The SEM, XRD, FTIR, and XPS results showed that CASA contains many spherical particles and functional groups such as NH₂, CO, and HSO₃. The adsorption experiments revealed that CASA presented excellent adsorption performance for Cr(III) (274.69 mg/g of max adsorption capacity) from high-salinity wastewater, which was much better than other reported adsorbents with different structures. Meanwhile, adsorption equilibrium could be reached within 10 min due to the introduction of abundant sulfonic acid groups on its surface. In addition, the adsorption process followed the Langmuir adsorption isotherm, and the experimental data conformed to the pseudo-second-order kinetics model. Moreover, the main adsorption mechanisms include chelation, electrostatic interactions, and cation exchange, which provide an important theoretical basis for the removal of toxic inorganic pollutants from leather wastewater.

Fabrication of polydopamine-based NIR-light responsive imprinted nanofibrous membrane for effective lysozyme extraction and controlled release from chicken egg white

The development of highly efficient performance matrix for protein adsorption and scalable throughput adsorbent is highly desired, especially in pharmaceuticals and food industries. In this work, we present a simple methodology to prepare a nanofibrous membrane based surface molecular imprinted matrix (MIP) for selective separation of lysozyme. The MIP was developed by coating carboxylated poly (vinyl alcohol-co-ethylene) nanofibrous mat (EVOH-CCA NFM) with a near infrared (NIR)-light responsive polydopamine (PDA) layer. The open porous nanofibrous structure and a thin PDA layer endowed the MIPs with adsorption capacity (500 mg.g-1) within 150 min. The developed surface MIPs not only showed imprinting factor (IF = 4) with reusability upon 5 cycles, but also capability of extracting lysozyme from egg-white directly. The MIPs showed controlled release of extracted lysozyme triggered by the NIR-light responsive property of the PDA layer. Moreover, the released lysozyme possesses good bioactivity, evidenced by efficient decomposition of micrococcus bacterial cell wall.

Rapid removal of nitrate from liquid dairy manure by cationic poly (vinyl alcohol-co-ethylene) nanofiber membrane

Elevated levels of nitrate in surface water is a leading concern, which impacts human and animal health, and controlling it requires improved and sustainable methods capable of removing nitrate anions from source waste water to reduce nitrate anions transport to environment. In liquid dairy manure, nitrogen content can vary from 200 to 600 ppm and the transport of manure nitrogen into ambient water through hydrologic processes has a potential to exceed the maximum contaminant level limit (10 ppm) of nitrate nitrogen for regulated public water systems. Dairy manure is considered as a reservoir of nitrate. This research investigates on the determination of optimal designing of nanofiber membrane to remove nitrate anions from liquid dairy manure. A cationic poly (vinyl alcohol-co-ethylene) nanofiber membrane (EVOH) NFM was grafted via UV with 2-(methacryloyloxy) ethyl trimethylammonium chloride (DMAC) monomers. The adsorption efficiency of nitrate by the membrane was determined on liquid manure of dairy lagoons located in Central Valley of California. Initial nitrate concentrations in dairy manure varied from 75 to 100 ppm. Results showed that nitrate in dairy water was removed by 70% in 40 min. Tortuous structure and chemical stability of membrane resulted in nitrate dynamic binding capacity of 40 mg g^-1. Furthermore, it exhibits efficient reusability without significant changes in its performance using 0.5 M sodium hydroxide solution for nitrate desorption. Results showed that change in pH, and multi-anion conditions had limited effects on nitrate removal efficiency, and EVOH NFM can be a viable option to remove nitrate of liquid manure. This could be used for mitigating transport of excess nitrate from manure to environment. Overall, the results suggest that EVOH-g-DMAC NFM is efficient, low-cost (13 USD/m³) and recyclable material for sustainable removal of nitrate from dairy manure wastewater without requiring any ionic strength or pH adjustment.

Adsorption of Cellulase on Wrinkled Silica Nanoparticles with Enhanced Inter-Wrinkle Distance

Mesoporous silica materials offer a unique opportunity for enzyme immobilization thanks to their properties, such as tuneable pore size, large surface area and easy functionalization. However, a significant enhancement of cellulase enzyme activity entrapped inside the silica pores still represents a challenge. In this work, we immobilized cellulase by adsorption on wrinkled silica nanoparticles (WSNs), obtaining an active and stable biocatalyst. We used pentanol as co-solvent to synthesize WSNs with enhanced inter-wrinkle distance in order to improve cellulase hosting. The physical-chemical and morphological characterization of WSNs and cellulase/WSNs was performed by thermogravimetric (TG), Fourier transform infrared (FT-IR), and transmission electron microscopy (TEM) analyses. The obtained results showed that this matrix generates a favourable microenvironment for hosting cellulase. The results of the catalytic assays and operational stability confirmed the key role of size, morphology and distribution of the pores in the successful outcome of the cellulase immobilization process. The immobilization procedure used allowed preserving most of the secondary structure of the enzyme and, consequently, its catalytic activity. Moreover, the same value of glucose yield was observed for five consecutive runs, showing a high operational stability of the biocatalyst.

Reusable molecularly imprinted polymeric nanospheres for diclofenac removal from water samples

The preparation of efficient molecularly imprinted polymers materials (MIPs) for pharmaceutical residue removal is still a challenging task. Herein, we design uniformly molecularly imprinted polymer nanospheres via a precipitation polymerization method using methacrylic acid (MAA) as functional monomer and N,N-methylenebis(acrylamide) (MBAA) as a crosslinker for removal of diclofenac (DFC) as a model for pharmaceutical pollutants. Nanospheres with average size 200 nm were prepared with MAA:MBAA at a ratio of 1:7 and acetonitrile/toluene (1:1) as a porogenic solvent. The successful synthesis is evidenced by Fourier transform infrared spectroscopy, scanning electron microscopy, and with a particle size analyzer. The rebinding experiments confirmed that the more introduction of the carboxyl groups from MAA could remarkably improve the imprinting effect with a significantly increased imprinting factor and specific rebinding capacity reached 450 mg/g after 15 min. Furthermore, the adsorption capacity of the molecularly imprinted polymers is maintained above 85% after seven regeneration cycles, indicating that the molecularly imprinted polymers can be used multiple times. Moreover, the developed molecularly imprinted polymers show promising DFC removal efficiency from real water samples, which suggests that the prepared molecularly imprinted polymer nanospheres are promising in DFC separation.

Overview of Recent Advances in Immobilisation Techniques for Phenol Oxidases in Solution

Over the past two decades, phenol oxidases, particularly laccases and tyrosinases, have been extensively used for the removal of numerous pollutants in wastewaters due to their broad substrate specificity and their ability to use readily accessible molecular oxygen as the essential cofactor. As for other enzymes, immobilisation of laccases and tyrosinases has been shown to improve the performance and efficiency of the biocatalysts in solution. Several reviews have addressed the enzyme immobilisation techniques and the application of phenol oxidases to decontaminate wastewaters. This paper offers an overview of the recent publications, mainly from 2012 onwards, on the various immobilisation techniques applied to laccases and tyrosinases to induce and/or increase the performance of the biocatalysts. In this paper, the emphasis is on the efficiencies achieved, in terms of structural modifications, stability and resistance to extreme conditions (pH, temperature, inhibitors, etc.), reactivity, reusability, and broad substrate specificity, particularly for application in bioremediation processes. The advantages and disadvantages of several enzyme immobilisation techniques are also discussed. The relevance and effectiveness of the immobilisation techniques with respect to wastewater decontamination are critically assessed. A perspective on the future directions for large-scale application of the phenol oxidases in immobilised forms is provided.

An Innovative Nanobody-Based Electrochemical Immunosensor Using Decorated Nylon Nanofibers for Point-of-Care Monitoring of Human Exposure to Pyrethroid Insecticides

A novel ultrasensitive nanobody-based electrochemical immunoassay was prepared for assessing human exposure to pyrethroid insecticides. 3-Phenoxybenzoic acid (3-PBA) is a common human urinary metabolite for numerous pyrethroids, which broadly served as a biomarker for following the human exposure to this pesticide group. The 3-PBA detection was via a direct competition for binding to alkaline phosphatase-embedded nanobodies between free 3-PBA and a 3-PBA-bovine serum albumin conjugate covalently immobilized onto citric acid-decorated nylon nanofibers, which were incorporated on a screen-printed electrode (SPE). Electrochemical impedance spectroscopy (EIS) was utilized to support the advantage of the employment of nanofibrous membranes and the success of the immunosensor assembly. The coupling between the nanofiber and nanobody technologies provided an ultrasensitive and selective immunosensor for 3-PBA detection in the range of 0.8 to 1000 pg mL-1 with a detection limit of 0.64 pg mL-1. Moreover, when the test for 3-PBA was applied to real samples, the established immunosensor proved to be a viable alternative to the conventional methods for 3-PBA detection in human urine even without sample cleanup. It showed excellent properties and stability over time.

Nano-immobilized cellulases for biomass processing with application in biofuel production

Several researches have focused on the enzymatic pretreatment of lignocellulose biomass to produce fermentable sugars that can lead to ethanol production thus facilitating pathways for sustainable biofuel production. Enzymes are fundamental to the pretreatment process, however, are required in larger quantities during pretreatment process thus influencing biofuel production cost. Immobilization of enzymes to a suitable support/matrix could enhance its stability, and reusability thus containing cost. This chapter focuses on developing an advanced technology for immobilizing enzymes to nanomaterials; variety of nanomaterials used for immobilization, nature of enzyme/protein nanomaterial interactions, methods of enzyme immobilization, and factors affecting mode of interaction for achieving hydrolysis of microcrystalline cellulose and natural cellulosic substrate. The binding of enzyme (94%) to a nanomaterial was established by spectroscopy techniques. The kinetics study, conducted at optimum pH (pH 4) and temperature (50°C for free and 60°C immobilized enzyme), exhibited improvement in immobilized enzyme properties. The immobilized enzyme retained up to 50% of its enzyme activity in five consecutive cycles. This chapter advocates the use of nano-immobilized enzymes in biomass hydrolysis for biofuel production.

Ultrasensitive label-free electrochemical immunosensor based on PVA-co-PE nanofibrous membrane for the detection of chloramphenicol residues in milk

An ultrasensitive label-free amperometric immunosensor for the detection of chloramphenicol (CAP) residues in milk has been developed by using a screen-printed carbon electrode laminated with a layer of poly (vinyl alcohol-co-ethylene) (PVA-co-PE) nanofibrous membrane that is covalently immobilized with a CAP antibody (anti-CAP). The performance of the PVA-co-PE nanofiber membrane (PVA-co-PE NFM) on the electrode was compared with a PVA-co-PE casted membrane (PVA-co-PE CM), necessary fabrication steps and performance of the sensors were investigated by electrochemical impedance spectroscopy (EIS). The application of the PVA-co-PE NFM decreased the electron-transfer-resistance by about 4 times compared with a conventional PVA-co-PE casted membrane. Under the optimal conditions, the established immunosensor exhibited high sensitivity for determination of CAP in a range 0.01-10 ng mL^-1, with a limit of detection of 0.0047 ng mL^-1. In addition to the good selectivity, reusability and stability over time, the prepared immunosensor was successfully used in the detection of CAP in milk samples without any pretreatment.