Influence of inhibitors on the adhesion of SRB to the stainless steel in circulating cooling water

d-tyrosine enhances disoctyl dimethyl ammonium chloride on alleviating SRB corrosion

Microbiologically influenced corrosion (MIC) caused by sulfate reducing bacteria (SRB) is a serious challenge in many industries, but biofilm greatly decreases the toxicity of bactericides to cell inside. d-amino acids are potential enhancers for bactericides due to their excellent performance on biofilm inhibition. However, the mechanism of d-amino acid cooperating with bactericides for MIC inhibition is still unknown. In this study, d-tyrosine（D-Tyr）and disoctyl dimethyl ammonium chloride (DDAC) were selected as the typical d-amino acid and bactericide, respectively, to evaluate their synergetic inhibition on the corrosion caused by Desulfovibrio vulgaris. D-Tyr obviously enhanced the role of DDAC in inhibiting corrosion with high corrosion inhibition efficiency at 77.23 %. The attachment of EPS and live cells on the coupon surface decreased in the presence of D-Try, leading to more cells directly exposed to DDAC. Besides, D-Try decreased the amount of live cells on the surface and thus reduced the utilization of Fe by SRB and corrosion current. Moreover, dead cells settling to the coupon surface may form a protective lay to retard the contact between live SRB and Fe, leading to slow cathode reaction and less corrosion. Therefore, D-Tyr can reduce the coverage of biofilm, thereby reducing its protective effect on SRB and achieving better corrosion inhibition effect. This work provides a new strategy for improving bactericides and inhibiting MIC.

Biofilms and beyond: a comprehensive review of the impact of Sulphate Reducing Bacteria on steel corrosion

Sulphate-reducing bacteria (SRB) are known to cause severe corrosion of steel structures in various industries, resulting in significant economic and environmental consequences. This review paper critically examines the impact of SRB-induced corrosion on steel, including the formation of SRB biofilms, the effect on different types of steel, and the various models developed to investigate this phenomenon. The role of environmental factors in SRB-induced corrosion, molecular techniques for studying SRBs, and strategies for mitigating corrosion are discussed. Additionally, the sustainability implications of SRB-induced corrosion and the potential use of alternative materials were explored. By examining the current state of knowledge on this topic, this review aims to provide a comprehensive understanding of the impact of SRB-induced corrosion on steel and identify opportunities for further research and development.

Corrosion Behavior on 20# Pipeline Steel by Sulfate-Reducing Bacteria in Simulated NaCl Alkali/Surfactant/Polymer Produced Solution

The corrosion behavior of sulfate-reducing bacteria (SRB) on 20# carbon steel in the NaCl alkali-surfactant-polymer (ASP) flooding system was studied by scanning electron microscopy, electrochemical measurement, X-ray photoelectron spectroscopy, and laser confocal microscopy. The results showed that the presence of SRB results in a large viscosity loss of the system. SRB can use hydrolyzed polyacrylamide (HPAM) as a nutrient to grow, and the number of SRB remained at a high level after 15 days. Weight loss and electrochemical tests indicated that SRB promoted corrosion of pipeline steel. The corrosion of carbon steel in the early stage of immersion was inhibited by the biofilm formed on the surface, and the thick biofilm in the later stage of immersion caused serious pitting corrosion. The localized corrosion caused by SRB was not inhibited by HPAM and sodium petroleum sulfonate (surfactant) adsorbed on the surface.

Corrosion in seawater desalination industry: A critical analysis of impacts and mitigation strategies

In the current world, freshwater production by clean energy sources with minimum environmental footprints is the main challenge for humankind which is dramatically deteriorating by overexploitation of available water resources. Seawater desalination technology greatly contributes to the mitigation of these serious conditions to produce potable water. However, because desalination plants handle extremely aggressive seawater under stringent operational conditions, they are highly vulnerable to insidious effects of corrosion primarily in the form of general and localized corrosion. Moreover, mineral scaling and bio-fouling are major challenges that further exacerbate corrosion phenomena. So, to ensure the continual operation and curbing corrosion in seawater desalination systems, strict monitoring and selection of highly corrosion-resistance materials are of prime concern. The present paper briefly explores fundamental concepts of corrosion in the desalination industry besides discussing different mitigation strategies for reducing the pernicious effects of corrosion which gravely impair environment quality and durability of desalination infrastructures. Moreover, the authors propose the knowledge gaps and perspectives to delineate the future research direction. Effective solutions for avoiding seawater stagnation, developing highly sophisticated coatings and surface modification technologies, application of advanced computational programs for accurate prediction of possible corrosion failure in desalination plants, and using quantum technology and magnetic corrosion inhibitor in seawater desalination are recommended as an urgent future research focus to combat against corrosion. On the whole, despite outstanding breakthroughs in the field of corrosion control in the desalination industry, the long-term performance of current materials is highly controversial as still many cases of corrosion failures have been reported which indicates the necessity of intensive research work.

SRB-mediated corrosion of marine submerged AISI 1020 steel under impressed current cathodic protection

Metallic corrosion is a recurrent and costly problem to almost every industry; therefore, prevention strategies might be well-defined on a case-by-case basis. Commonly, cathodic protection (CP) is the world's most widely-adopted technique to guarantee the integrity of buried or submerged structures from corrosion. However, as current potential values are dependent on metal-structure and environmental features, the target shall be well-identified; otherwise, the intended effect will not be reached. In seawater, a protective current potential of -800 mV_Ag/AgCl is recommended by technical standards, while a more negative potential (-900 mV_Ag/AgCl) is the suggested criterion for the control of corrosion induced by sulfate-reducing bacteria (SRB), even though without proper scientific support. Thus, this study focused on evaluating the efficiency of different cathodic protection potentials (-800, -900 and, -1000 mV_Ag/AgCl) on inhibiting SRB-mediated corrosion of AISI 1020 steel. Both unprotected and impressed current cathodically protected steel specimens were exposed to indigenous microorganisms in seawater for 7 days. The Most Probable Number (MPN) enumeration of sessile aerobic heterotrophic bacteria, acid-producing bacteria and, sulfate-reducing bacteria was performed at the beginning and at the end of the assays. Also, the reducing activity of hydrogenase-positive SRB strains was measured. Although the microbial colonization was greater on unprotected steel surfaces than on the cathodically protected ones, biofilm quantification of CP specimens did not show important differences regardless of the potential. However, hydrogenase-positive SRB counts increased with the reduction of CP potential value, promoting an increase in the number and depth of pits on specimens protected at -1000 mV_Ag/AgCl when compared with those protected at -800 mV_Ag/AgCl and unprotected ones.

Environmental impacts of desalination and brine treatment - Challenges and mitigation measures

Desalination is perceived as an effective and reliable process for obtaining freshwater from aqueous saline solutions such as brackish water, seawater and brine. This can be clarified by the fact that >300 million people worldwide rely on desalinated water for their daily needs. Although the desalination process offers many advantages, there are rising concerns about possible adverse environmental impacts. Generally, environmental impacts can be generated both in the construction and operation of desalination plants. A major issue of desalination is the co-produced waste called 'brine' or 'reject' which has a high salinity along with chemical residuals and is discharged into the marine environment. In addition to brine, other main issues are the high energy consumption of the desalination and brine treatment technologies as well as the air pollution due to emissions of greenhouse gasses (GHGs) and air pollutants. Other issues include entrainment and entrapment of marine species, and heavy use of chemicals. The purpose of this review is to analyze the potential impacts of desalination and brine treatment on the environment and suggest mitigation measures.

Synthesis, characterization and corrosion inhibition behavior of 2-aminofluorene bis-Schiff bases in circulating cooling water

Two new bis-Schiff bases, namely 2-bromoisophthalaldehyde-2-aminofluorene (M1) and glutaraldehyde 2-aminofluorene (M2) were synthesized and were characterized, the potentiodynamic polarization curve confirmed that they were anode type inhibitors.

Crystallization of CaCO3 in Aqueous Solutions with Extremely High Concentrations of NaCl

The effect of NaCl at extremely high concentrations from 3.5 to 14 wt. % on the crystallization of CaCO3 was investigated in depth. The static test experiment verified that the Ca2+ retention efficiency (η) of NaCl on CaCO3 scale increased from 31.06% (3.5 wt. %) to 41.56% (14 wt. %). Based on the calculation of supersaturation rations, the high concentration of NaCl could reduce the activity coefficients of [Ca2+] and [CO32−], thus reducing the actual concentration of CaCO3. The CaCO3 deposition rate constants (k) showed that NaCl slowed down the rate of CaCO3 crystallization. The X–ray diffraction (XRD) testing disclosed that the growth of (1 0 4) and (1 1 0) faces from calcite was impeded, while the formation of (1 1 1) face from aragonite was induced by the increasing concentration of NaCl. The inductively coupled plasma optical emission spectrometry (ICP–OES) results indicated that Na+ could be doped into CaCO3, leading to the one–dimensional crystal growth. It was further proved that NaCl heightens the efficiency of the typical phosphate inhibitors (2–phosphonobutane–1,2,4–tricarboxylic acid (PBTCA) and 1–hydroxyethane–1,1–diphosphonic acid (HEDP)) on prohibiting the scale of CaCO3.