Synthesizing, characterizing, and toxicity evaluating of Phycocyanin-ZnO nanorod composites: A back to nature approaches

Photocatalytic Degradation, Anticancer, and Antibacterial Studies of Lysinibacillus sphaericus Biosynthesized Hybrid Metal/Semiconductor Nanocomposites

The biological synthesis of nanocomposites has become cost-effective and environmentally friendly and can achieve sustainability with high efficiency. Recently, the biological synthesis of semiconductor and metal-doped semiconductor nanocomposites with enhanced photocatalytic degradation efficiency, anticancer, and antibacterial properties has attracted considerable attention. To this end, for the first time, we biosynthesized zinc oxide (ZnO) and silver/ZnO nanocomposites (Ag/ZnO NCs) as semiconductor and metal-doped semiconductor nanocomposites, respectively, using the cell-free filtrate (CFF) of the bacterium Lysinibacillus sphaericus. The biosynthesized ZnO and Ag/ZnO NCs were characterized by various techniques, such as ultraviolet-visible spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, and photoluminescence spectroscopy. The photocatalytic degradation potential of these semiconductor NPs and metal-semiconductor NCs was evaluated against thiazine dye, methylene blue (MB) degradation, under simulated solar irradiation. Ag/ZnO showed 90.4 ± 0.46% photocatalytic degradation of MB, compared to 38.18 ± 0.15% by ZnO in 120 min. The cytotoxicity of ZnO and Ag/ZnO on human cervical HeLa cancer cells was determined using an MTT assay. Both nanomaterials exhibited cytotoxicity in a concentration- and time-dependent manner on HeLa cells. The antibacterial activity was also determined against Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus). Compared to ZnO, Ag/ZnO NCs showed higher antibacterial activity. Hence, the biosynthesis of semiconductor nanoparticles could be a promising strategy for developing hybrid metal/semiconductor nanomaterials for different biomedical and environmental applications.

Progress on the Extraction, Separation, Biological Activity, and Delivery of Natural Plant Pigments

Natural plant pigments are safe and have low toxicity, with various nutrients and biological activities. However, the extraction, preservation, and application of pigments are limited due to the instability of natural pigments. Therefore, it is necessary to examine the extraction and application processes of natural plant pigments in detail. This review discusses the classification, extraction methods, biological activities, and modification methods that could improve the stability of various pigments from plants, providing a reference for applying natural plant pigments in the industry and the cosmetics, food, and pharmaceutical industries.

Functional bioinspired nanocomposites for anticancer activity with generation of reactive oxygen species

Cancer is a debilitating and deadly disease caused by the uncontrolled growth of aberrant cell populations. This disease cannot always be controlled with traditional therapies and medicines. Different medicines are being used for this purpose, however these medicines have their side effects and are harmful to healthy cells. A better way to cure cancer disease is by limiting the agglomeration of cancer cells, minimizing their growth and their population by destroying these harmful cells. This could be achieved by controlling the function of mitochondria and DNA in cancer cells with the use of biocompatible materials with tuneable physical properties. Accordingly, research is ongoing as to the use of nanomaterials and nanotechnology in medicine. Zinc oxide semiconductor nanoparticles have displayed good anticancer behaviour. They have unique properties such as biocompatibility, good stability, and are environmentally friendly. Owing to these characteristics, they are focused on biological applications such as drug delivery and cancer therapy. In the present research work, zinc oxide, titanium dioxide nanoparticles and titanium oxide-zinc oxide nanocomposites were successfully trailed for anti-cancer activity. Pure zinc oxide nanoparticles (ZnO NPs), titanium dioxide nanoparticles (TiO₂ NPs) and their nanocomposites (TiO₂+ZnO NPs) were prepared by the co-precipitation technique. The structural properties were investigated by X-ray diffraction, which confirmed the Wurtzite structure of pure ZnO NPs. The morphology of the NPs was checked by scanning electron microscopy. For incident light having a higher energy band gap of nanomaterials, the electrons are excited to the conduction band and these electrons generate reactive oxygen species (ROS). The efficacy of these nanomaterials was checked by exposing the NPs to the human liver cancer cell HepG2. The MTT assay describes anticancer activity via cell viability. The cell viability of composites was observed to be greater than pure ZnO NPs. Their results showed that the structure of ZnO NPs remains the same with composites of TiO₂ NPs, but the band gap of the composite was intermediate for individual samples. It also showed that the anticancer activity of composites was also less than pure ZnO NPs which is due to the reduction of ROS generation. This is observed that nanocomposites of ZnO and TiO₂ could be effective in the development of a treatment of human liver cancer cells.

Bacteria assisted green synthesis of copper oxide nanoparticles and their potential applications as antimicrobial agents and plant growth stimulants

Copper oxide nanoparticles (CuO-NPs) have piqued the interest of agricultural researchers due to their potential application as fungicides, insecticides, and fertilizers. The Serratia sp. ZTB29 strain, which has the NCBI accession number MK773873, was a novel isolate used in this investigation that produced CuO-NPs. This strain can survive concentrations of copper as high as 22.5 mM and can also remove copper by synthesizing pure CuO-NPs. UV-VIS spectroscopy, DLS, Zeta potential, FTIR, TEM, and XRD techniques were used to investigate the pure form of CuO-NPs. The synthesized CuO-NPs were crystalline in nature (average size of 22 nm) with a monoclinic phase according to the XRD pattern. CuO-NPs were found to be polydisperse, spherical, and agglomeration-free. According to TEM and DLS inspection, they ranged in size from 20 to 40 nm, with a typical particle size of 28 nm. CuO-NPs were extremely stable, as demonstrated by their zeta potential of -15.4 mV. The ester (C=O), carboxyl (C=O), amine (NH), thiol (S-H), hydroxyl (OH), alkyne (C-H), and aromatic amine (C-N) groups from bacterial secretion were primarily responsible for reduction and stabilization of CuO-NPs revealed in an FTIR analysis. CuO-NPs at concentrations of 50 μg mL^-1 and 200 μg mL^-1 displayed antibacterial and antifungal activity against the plant pathogenic bacteria Xanthomonas sp. and pathogenic fungus Alternaria sp., respectively. The results of this investigation support the claims that CuO-NPs can be used as an efficient antimicrobial agent and nano-fertilizer, since, compared to the control and higher concentrations of CuO-NPs (100 mg L^-1) considerably improved the growth characteristics of maize plants.

Dissection of the antibacterial mechanism of zinc oxide nanoparticles with manipulable nanoscale morphologies

Despite the extensive uses of ZnO nanoparticles as promising antimicrobial agents to tackle the severe microbial infections, the systematic antibacterial studies on ZnO nanoparticles with manipulable nanoscale morphologies at the genetic expression level remain ill-defined. In this study, via a controllable thermal decomposition, ZnO nanoparticles of different morphologies were facilely prepared. Additionally, the surface PEGylation of ZnO was conducted to obtain the nanoparticles of low biotoxicity. While all the prepared ZnO nanoparticles exhibited the significantly chemical activities, the pronounced antibacterial effect of obtained ZnO nanoparticles was also identified, in which the ultra-small ones (~5 nm) showed the best performance. Moreover, the antibacterial activities of ZnO nanoparticles were studied by bacterial nucleic acid leakage, alkaline phosphatase, biofilm and reactive oxygen species (ROS) assays. Furthermore, the transcriptome analysis of ZnO nanoparticles with different morphologies against Escherichia coli (E. coli) revealed the underlying antibacterial mechanism involved the signal transduction, material transport, energy metabolism and other biological processes. Therefore, the cost-effective preparation of ZnO nanoparticles with distinct morphological features provides insights for the development of application specific antibacterial agents.

Cyanobacteria as biochemical energy source for the synthesis of inorganic nanoparticles, mechanism and potential applications: a review

Green synthesis of nanoparticles (NPs) has gained great concern among researchers due to their unique properties, excellent applications and efficient route of synthesis. From the last decades, the number biologicals such as plants, fungus, bacteria, yeast, algae, and cyanobacteria and their products are using by various researchers for the synthesis of different NPs. However, the pillar of green chemistry keeps touching new heights to improve the performance. This review paper unveils almost recent cyanobacteria-assisted greener NP synthesis technique, characterization and application. The enormous potency of cyanobacteria in NP synthesis (silver, gold, copper, zinc, palladium, titanium, cadmium sulfide, and selenium) and significance of reducing enzymes were summarized. The extracellular and intracellular entity such as metabolites, enzyme, protein, pigments in cyanobacteria play a significant role in the conversion of metal ions to metal NPs with unique properties discussed briefly. The green synthesis of nanomaterials is valuable because of their cost-effective, nontoxic and eco-friendly prospects as well as the potential application metal NPs such as antibacterial, antifungal, anticancerous, catalytic, drug delivery, bioimaging, nanopesticide, nanofertilizer, sensing properties, etc. Therefore, in the present review, we have systematically discussed the mechanisms of synthesis and applications of cyanobacteria-assisted green synthesis of NPs.

Microbial Fabrication of Zinc Oxide Nanoparticles and Evaluation of Their Antimicrobial and Photocatalytic Properties

Zinc oxide (ZnO) nanoparticles have attracted significant interest in a number of applications ranging from electronics to biomedical sciences due to their large exaction binding energy (60 meV) and wide bandgap of 3.37 eV. In the present study, we report the low-cost bacterium based “eco-friendly” efficient synthesis of ZnO nanoparticles by using the zinc-tolerant bacteria Serratia nematodiphila. The physicochemical characterization of ZnO nanoparticles was performed by employing UV-vis spectroscopy, XRD, TEM, DLS, Zeta potential, and Raman spectroscopy. The antimicrobial and antifungal studies were investigated at different concentrations using the agar well-diffusion method, whereby the microbial growth rate decreases with the increase in nanoparticle concentration. Further, photocatalytic performance studies were conducted by taking methyl orange (MO) as a reference dye.

Reactive Oxygen Species-Related Nanoparticle Toxicity in the Biomedical Field

The unique physicochemical characteristics of nanoparticles have recently gained increasing attention in a diverse set of applications, particularly in the biomedical field. However, concerns about the potential toxicological effects of nanoparticles remain, as they have a higher tendency to generate excessive amounts of reactive oxygen species (ROS). Due to the strong oxidation potential, the excess ROS induced by nanoparticles can result in the damage of biomolecules and organelle structures and lead to protein oxidative carbonylation, lipid peroxidation, DNA/RNA breakage, and membrane structure destruction, which further cause necrosis, apoptosis, or even mutagenesis. This review aims to give a summary of the mechanisms and responsible for ROS generation by nanoparticles at the cellular level and provide insights into the mechanics of ROS-mediated biotoxicity. We summarize the literature on nanoparticle toxicity and suggest strategies to optimize nanoparticles for biomedical applications.

Development, Cytotoxicity and Eye Irritation Profile of a New Sunscreen Formulation Based on Benzophenone-3-poly(ε-caprolactone) Nanocapsules

The objective of this work was to characterize the toxicological profile of a newly developed sunscreen formulation based on polymeric nanocapsules (NCs) loading benzophenone-3 (BZP3). NCs composed of poly(ε-caprolactone) carrot oil and Pluronic^® F68 were produced by emulsification-diffusion method. Their mean particle size (Z-Ave) ranged from 280 to 420 nm, polydispersity index (PDI) was below 0.37, while zeta potential (ZP) reached about |+11 mV|. No cytotoxic effects were observed in L929 fibroblast cell line for the blank (i.e., non-loaded) NCs and BZP3-loaded NCs (BZP3-NCs). The semi-solid sunscreen formulation was stable over time (centrifugation testing) and exhibited non-Newtonian pseudoplastic behavior, which is typical of products for topical application onto the skin. The sun protection factor (SPF) value reached 8.84, when incorporating BZP3-NCs (SPF of 8.64) into the semi-solid formulation. A synergistic effect was also observed when combining the formulation ingredients of nanocapsules, i.e., SPF of carrot oil was 6.82, blank NCs was 6.84, and BZP3-loaded NCs was 8.64. From the hen’s egg-chorioallantoic membrane test (HET-CAM) test, the non-irritation profile of the developed formulations could also be confirmed. The obtained results show a promising use of poly(ε-caprolactone) nanocapsules to be loaded with lipophilic sunscreens as benzophenone-3.