Improved blood compatibility of polysulfone membrane by anticoagulant protein immobilization

Electrospun polyhedral oligomeric silsequioxane-poly(carbonate-urea) urethane for fabrication of hemocompatible small-diameter vascular grafts with angiogenesis capacity

The clinical utility of small-diameter vascular grafts (SDVGs) is limited due to the possibility of thrombosis and intimal hyperplasia. These features can delay the development of a functional endothelial cell (EC) monolayer on the luminal surface of grafts. Therefore, the development and fabrication of vascular grafts (VGs) with comparable extracellular matrix (ECM) functions are mandatory to elicit hemocompatible confluent EC monolayers, and angiogenesis behavior inside the body. To promote the interactions between ECs and the surface of electrospun polyacrylic acid-grafted polyhedral oligomeric silsesquioxane-poly(carbonate-urea)-urethane (PAAc-POSS-PCUU), in this research, the surface of nanofibers was modified by covalently immobilizing extracted soluble proteins from aorta (ESPA) using EDC/NHS chemistry. The ATR-FTIR spectroscopy, WCA, and SEM microscopy confirmed the binding of acrylic acid and soluble vascular proteins on the surface of electrospun fibers. The PAAc-POSS-PCUU nanofibers and engineered biomimetic Pro-PAAc-POSS-PCUU nanofibers exhibited excellent biocompatibility indicated by increased survival rate (p < 0.05). Western blotting revealed the increase of VE-cadherin, Tie-2, vWF, and VEGFR-2 in HUVECs after being plated on PAAc-POSS-PCUU and Pro-PAAc-POSS-PCUU scaffolds, indicating appropriate angiogenesis behavior (p < 0.05). Besides, the antioxidant capacity was induced by the increase of SOD and GPx activity (p < 0.05). Additionally, blood compatibility tests revealed that Pro-PAAc-POSS-PCUU nanofibers accelerate the formation of a single EC layer without hemolysis and platelet adhesion. Taken together, Pro-PAAc-POSS-PCUU nanofibers exhibited excellent blood compatibility, and angiogenesis behavior, making them a promising candidate for clinical applications.

Successful application of photocatalytic recycled TiO2-GO membranes for the removal of trace organic compounds from tertiary effluent

Photocatalytic membranes are a promising technology for water and wastewater treatment. Towards circular economy, extending the lifetime of reverse osmosis (RO) membranes for as long as possible is extremely important, due to the great amount of RO modules discarded every year around the world. Therefore, in the present study, photocatalytic membranes made of recycled post-lifespan RO membrane (polyamide thin-film composite), TiO2 nanoparticles and graphene oxide are used in the treatment tertiary-treated domestic wastewater to remove trace organic compounds (TrOCs). The inclusion of dopamine throughout the surface modification process enhanced the stability of the membranes to be used as long as 10 months of operation. We investigated TrOCs removal by the membrane itself and in combination with UV-C and visible light by LED. The best results were obtained with integrated membrane UV-C system at pH 9, with considerable reductions of diclofenac (92%) and antipyrine (87%). Changes in effluent pH demonstrated an improvement in the attenuation of TrOCs concentration at higher pHs. By modifying membranes with nanocomposites, an increase in membrane hydrophilicity (4° contact angle reduction) was demonstrated. The effect of the lamp position on the light fluence that reaches the membrane was assessed, and greater values were found in the middle of the membrane, providing parameters for process optimization (0.29 ± 0.10 mW cm-2 at the center of the membrane and 0.07 ± 0.03 mW cm-2 at the right and left extremities). Photocatalytic recycled TiO2-GO membranes have shown great performance to remove TrOCs and extend membrane lifespan, as sustainable technology to treat wastewater.

Unravelling Surface Modification Strategies for Preventing Medical Device-Induced Thrombosis

The use of biomaterials in implanted medical devices remains hampered by platelet adhesion and blood coagulation. Thrombus formation is a prevalent cause of failure of these blood-contacting devices. Although systemic anticoagulant can be used to support materials and devices with poor blood compatibility, its negative effects such as an increased chance of bleeding, make materials with superior hemocompatibility extremely attractive, especially for long-term applications. This review examines blood-surface interactions, the pathogenesis of clotting on blood-contacting medical devices, popular surface modification techniques, mechanisms of action of anticoagulant coatings, and discusses future directions in biomaterial research for preventing thrombosis. In addition, this paper comprehensively reviews several novel methods that either entirely prevent interaction between material surfaces and blood components or regulate the reaction of the coagulation cascade, thrombocytes, and leukocytes.

Advances in Enhancing Hemocompatibility of Hemodialysis Hollow-Fiber Membranes

Hemodialysis, the most common modality of renal replacement therapy, is critically required to remove uremic toxins from the blood of patients with end-stage kidney disease. However, the chronic inflammation, oxidative stress as well as thrombosis induced by the long-term contact of hemoincompatible hollow-fiber membranes (HFMs) contribute to the increase in cardiovascular diseases and mortality in this patient population. This review first retrospectively analyzes the current clinical and laboratory research progress in improving the hemocompatibility of HFMs. Details on different HFMs currently in clinical use and their design are described. Subsequently, we elaborate on the adverse interactions between blood and HFMs, involving protein adsorption, platelet adhesion and activation, and the activation of immune and coagulation systems, and the focus is on how to improve the hemocompatibility of HFMs in these aspects. Finally, challenges and future perspectives for improving the hemocompatibility of HFMs are also discussed to promote the development and clinical application of new hemocompatible HFMs.

Graphical Abstract

Nano architectured cues as sustainable membranes for ultrafiltration in blood hemodialysis

Membranes with zeolites are encouraging for performing blood dialysis because zeolites can eliminate uremic toxins through molecular sieving. Although the addition of various pore-gen and adsorbent in the membrane can certainly impact the membrane production along with creatinine adsorption, however, it is not directed which pore-gen along with zeolite leads to better performance. The research was aimed at reducing the adsorption of protein-bound and uremic toxins by using mordenite zeolite as an adsorbent while polyethylene glycol and cellulose acetate as a pore generating agent. Membranes were cast by a phase-inversion technique which is cheap and easy to handle as compared to the electro-spinning technique. Through this strategy, the ability to adsorb creatinine and solute rejection percentage were measured and compared against the pristine PSU, when only PEG was used as a pore-modifier and when PEG along with CA was used as a pore-modifier along with a different concentration of zeolite. The experiments revealed that PEG membranes can give a better solute rejection percentage (93%) but with a low creatinine adsorption capacity that is 7654 μg/g and low bio-compatibility (PRT 392 s, HR 0.46%). However, PEG/CA membranes give maximum creatinine adsorption that is 9643 μg/g and also better bio-compatibility (PRT 490 s, HR 0.37%) but with a low BSA rejection (72%) as compared to the pristine PSU and PEG membranes. The present study finds that the concentration of mordenite zeolite affects the membrane performance because its entrapment and large pore size of the membrane decreases solute rejection but increases creatinine uptake level along with the better bio-compatibility.

Hemocompatibility of polyzwitterion-modified titanium dioxide nanotubes

Titanium dioxide nanotubes (TNTs) have attracted increasing interest as implantable materials due to their many desirable properties. However, their blood compatibility remains an issue. In this paper, TNTs of different diameters were modified with two types of zwitterionic polymers, poly(sulfobetaine methacrylate) (pSBMA) and poly(carboxybetaine methacrylate) (pCBMA), which were grafted onto the TNTs using ARGET-ATRP (activators regenerated by electron transfer atom transfer radical polymerization) method. Both pSBMA and pCBMA brushes coatings were found to greatly reduce adsorption of bovine serum albumin (BSA) and fibrinogen (Fib) onto the TNTs, showing excellent protein resistance. Moreover, the effects of the surface topography on the amount of protein adsorption were largely suppressed by the polyzwitterion coatings. The conformation of the protein adsorbed to the substrates was analyzed at the molecular level by Fourier-transform infrared reflection spectroscopy (FT-IR), which revealed that the BSA adsorbed on the polyzwitterion-modified TNTs adopted significantly different secondary structures from that on the virgin TNTs, whereas the conformation of the adsorbed Fib remained basically the same. The polyzwitterion-modified TNTs were found to be non-hemolytic, and platelet adhesion and activation was significantly reduced, showing excellent blood compatibility.

A review on surface modification methods of poly(arylsulfone) membranes for biomedical applications

Considerable methods have so far been used for the surface modification of biomedical membranes. Several reviews and articles have been published on the improvements achieved in the field of poly(arylsulfone) membranes subjected to various surface modification methods and used in biomedical applications. This review concentrates on the surface modification, biological applications and future perspective of the poly(arylsulfone) biomedical membranes. Different surface modification procedures employed for the poly(arylsulfone) membranes have been classified, studied and compared. Diverse surface modification techniques include surface coating, chemical modification and immobilization/cross-linking, grafting, surface zwitterionicalization, mussel-inspired coating and layer-by-layer assembly. Furthermore, we review the recent research studies performed on the surface modification of the poly(arylsulfone) biomedical membranes. Meanwhile, the properties of biomedical membranes are also discussed in each section. At last, the future perspective and challenges of the strategies utilized for the surface modification of poly(arylsulfone) biomedical membranes are presented.

Fabrication and Analysis of Polydimethylsiloxane (PDMS) Microchannels for Biomedical Application

In this research work, Polydimethylsiloxane (PDMS) has been used for the fabrication of microchannels for biomedical application. Under the internet of things (IoT)-based controlled environment, the authors have simulated and fabricated bio-endurable, biocompatible and bioengineered PDMS-based microchannels for varicose veins implantation exclusively to avoid tissue damaging. Five curved ascending curvilinear micro-channel (5CACMC) and five curved descending curvilinear micro-channels (5CDCMC) are simulated by MATLAB (The Math-Works, Natick, MA, USA) and ANSYS (ANSYS, The University of Lahore, Pakistan) with actual environments and confirmed experimentally. The total length of each channel is 1.6 cm. The diameter of both channels is 400 µm. In the ascending channel, the first to fifth curve cycles have the radii of 2.5 mm, 5 mm, 7.5 mm, 10 mm, and 2.5 mm respectively. In the descending channel, the first and second curve cycles have the radii of 12.5 mm and 10 mm respectively. The third to fifth cycles have the radii of 7.5 mm, 5 mm, and 2.5 mm respectively. For 5CACMC, at Reynolds number of 185, the values of the flow rates, velocities and pressure drops are 19.7 µLs−1, 0.105 mm/s and 1.18 Pa for Fuzzy simulation, 19.3 µLs−1, 0.1543 mm/s and 1.6 Pa for ANSYS simulation and 18.23 µLs−1, 0.1332 mm/s and 1.5 Pa in the experiment. For 5CDCMC, at Reynolds number 143, the values of the flow rates, velocities and pressure drops are 15.4 µLs−1, 0.1032 mm/s and 1.15 Pa for Fuzzy simulation, 15.0 µLs−1, 0.120 mm/s and 1.22 Pa for ANSYS simulation and 14.08 µLs−1, 0.105 mm/s and 1.18 Pa in the experiment. Both channels have three inputs and one output. In order to observe Dean Flow, Dean numbers are also calculated. Therefore, both PDMS channels can be implanted in place of varicose veins to have natural blood flow.

A zwitterionic serine modified chitosan derivative for improving protein stability and activity

A zwitterionic phosphoryldiserine (PDS)- chitosan conjugate was synthesized via Atherton-Todd reaction, and its degree of substitution of PDS and structure were characterized by ¹H and ³¹P NMR spectra, ICP, FTIR and XRD. Thermal analysis confirmed that there existed the freezing bound water surrounding PDS-chitosan due to the introduction of zwitterionic PDS groups onto chitosan backbone. In vitro cytotoxicity and hemolysis assay demonstrated that PDS-chitosan had excellent cell compatibility. UV adsorption and fluorescence spectra revealed that the model protein, bovine serum albumin (BSA) tended to keep its native conformation and showed better thermal stability in aqueous media in the presence of PDS-chitosan. We also found that the esterase-like activity of BSA could be enhanced by low concentration of PDS-chitosan (C_BSA = 0.33 mg/mL, C_PDS-chitosan = 0.0625 and 0.125 mg/mL, pH = 7.4, T = 25 °C). The results indicated that zwitterionic PDS-chitosan showed great potential for maintaining protein function in biomedical applications.

Layer-by-Layer Deposition of Hyaluronan and Quercetin-Loaded Chitosan Nanoparticles onto Titanium for Improving Blood Compatibility

Surface modification is an effective way to improve the hemocompatibility of biomaterials. Quercetin has significant anticoagulation and antithrombotic effects, and thus it is a promising candidate agent for the surface modification of blood-contacting materials. In this study, quercetin was successfully encapsulated in tripolyphosphate–chitosan nanoparticles (TCs) based on the ionic gelation of chitosan with tripolyphosphate (TPP) anions. Then, hyaluronan acid (HA)/quercetin-loaded TPP–chitosan nanoparticle (QTCs) films, in addition to HA/TCs films, were prepared separately using an electrostatic layer-by-layer self-assembly technique. The encapsulation of quercetin in the chitosan nanoparticles was confirmed by UV spectra. The quercetin-loaded multilayer coatings were also successfully self-assembled, as confirmed by the UV spectra and contact angle measurements. Platelet adhesion experiments were carried out with platelet-enriched plasma so as to evaluate the blood compatibility of the different samples. There were many platelets on the surfaces of the glass and HA/TC-coated titanium, which were partially activated but not aggregated. Meanwhile, many more platelets were observed on the uncoated titanium surfaces, most of which developed pseudopodia. By contrast, the platelet adhesion and activation were reduced remarkably on the surface of the HA/QTC-coated titanium. These results showed that the multilayer coatings containing quercetin could act as potential biomaterials to improve the anticoagulation performance of blood-contacting materials.

The hemocompatibility of the modified polysulfone membrane with 4-(chloromethyl)benzoic acid and sulfonated hydroxypropyl chitosan

Polysulfone (PSf) membrane is widely employed in blood purification fields, but the blood compatibility of PSf membrane is not adequate. To improve the hemocompatibility of PSf membrane, 4-(chloromethyl)benzoic acid (CMBA) and sulfonated hydroxypropyl chitosan (SHPCS) were grafted onto PSf membrane surface. In our strategy, CMBA was firstly grafted on the PSf membrane surface through the Friedel-Crafts alkylation reaction, and the product was named BAPSf membrane. Then, SHPCS was grafted onto the BAPSf membrane surface by esterification, and the product was named SHPCS-BAPSf membrane. The effects of temperature and reaction time on the productivity of BAPSf and the grafting density of carboxyl and the effects of reaction time on the grafting density of SHPCS grafted onto the BAPSf membrane surface were studied. The SHPCS-BAPSf membranes are investigated by ATR-FTIR, XPS, contact angle measurements and evaluated by blood compatibility in vitro. The results reveal that the hydrophilicity of SHPCS-BAPSf membranes were grealy improved and the evaluation of protein adsorption, hemolysis test, platelet adhesion plasma recalcification time(PRT), activated partial thromboplastin time(APTT), prothrombin time(PT) and thrombin time(TT) confirmed that the SHPCS-BAPSf membranes have remarkable blood compatibility.