Ginkgolides-loaded soybean phospholipid-stabilized nanosuspension with improved storage stability and in vivo bioavailability

Design of High-Payload Ascorbyl Palmitate Nanosuspensions for Enhanced Skin Delivery

A high-payload ascorbyl palmitate (AP) nanosuspension (NS) was designed to improve skin delivery following topical application. The AP-loaded NS systems were prepared using the bead-milling technique, and softly thickened into NS-loaded gel (NS-G) using hydrophilic polymers. The optimized NS-G system consisted of up to 75 mg/mL of AP, 0.5% w/v of polyoxyl-40 hydrogenated castor oil (Kolliphor® RH40) as the suspending agent, and 1.0% w/v of sodium carboxymethyl cellulose (Na.CMC 700 K) as the thickening agent, in citrate buffer (pH 4.5). The NS-G system was embodied as follows: long and flaky nanocrystals, 493.2 nm in size, -48.7 mV in zeta potential, and 2.3 cP of viscosity with a shear rate of 100 s-1. Both NS and NS-G provided rapid dissolution of the poorly water-soluble antioxidant, which was comparable to that of the microemulsion gel (ME-G) containing AP in solubilized form. In an ex vivo skin absorption study using the Franz diffusion cell mounted on porcine skin, NS-G exhibited faster absorption in skin, providing approximately 4, 3, and 1.4 times larger accumulation than that of ME-G at 3, 6, and 12 h, respectively. Therefore, the high-payload NS makes it a promising platform for skin delivery of the lipid derivative of ascorbic acid.

Design and Evaluation of Ginkgolides Gastric Floating Controlled Release Tablets Based on Solid Supersaturated Self-nanoemulsifying

Ginkgolides are receptor antagonist of platelet activating factor with great clinical prospect, but its application is limited by its low solubility, short half-life and poor alkaline environment stability. It is difficult to solve these problems with a single drug delivery system. In this study, supersaturated self-nanoemulsifying gastric floating tablets of ginkgolides were developed through the combination of solid supersaturated self-nanoemulsifying drug delivery system (solid S-SNEDDS) and gastric retentive floating drug delivery system (GFDDS) to solve these problems of ginkgolides. Solid S-SNEDDS was prepared by D-optimal mixture design, normalization method and single factor experiment. The properties of solid-S-SNEDDS were studied by TEM, PXRD, FT-IR, SEM and in vitro drug release profile. Then, the optimal formulation of stomach floating tablet was obtained through single factor experiment and center composite design, followed by the study of in vitro release, model and mechanism of release, in vitro buoyancy and kinetics of erosion and swelling. PXRD and FT-IR showed that the drug in solid S-SNEDDS existed in an amorphous manner and formed hydrogen bond with excipients. The results showed that the cumulative release of GA and GB in the optimal tablets was 96.12% and 92.57% higher than the simple tablets within 12 h. The release mechanism of the tablet was skeleton erosion and drug diffusion. In 12 h, the optimal tablets can float stably in vitro and release the drug at a constant rate, with a cumulative release of more than 80%. In summary, the combination of SNEDDS and GFDDS is a promising means to solve the problems of ginkgolides.

Nanosuspensions as carriers of active ingredients: Chemical composition, development methods, and their biological activities

Nanosuspensions (NSps) are colloidal dispersions of particles that have the potential to solve the delivery problems of active ingredients associated with their low solubility in water or instability due to environmental factors. It is essential to consider their chemical composition and preparation methods because they directly influence drug loading, size, morphology, solubility, and stability; these characteristics of nanosuspensions influence the delivery and bioavailability of active ingredients. NSps provides high loading of drugs, protection against degrading agents, rapid dissolution, high particle stability, and high bioavailability of active ingredients across biological membranes. In addition, they provide lower toxicity compared to other nanocarriers, such as liposomes or polymeric nanoparticles, and can modify the pharmacokinetic profiles, thus improving their safety and efficacy. The present review aims to address all aspects related to the composition of NSps, the different methods for their production, and the main factors affecting their stability. Moreover, recent studies are described as carriers of active ingredients and their biological activities.

Impact of Additives on Drug Particles during Liquid Antisolvent Crystallization and Subsequent Freeze-Drying

The impact of single or combinations of additives on the generation of nanosuspensions of two poorly water-soluble active pharmaceutical ingredients (APIs), fenofibrate (FF) and dalcetrapib (DCP), and their isolation to the dry state via antisolvent (AS) crystallization followed by freeze-drying was explored in this work. Combinations of polymeric and surfactant additives such as poly(vinyl alcohol) or hydroxypropyl methyl cellulose and sodium docusate were required to stabilize nanoparticles (∼200-300 nm) of both APIs in suspension before isolation to dryness. For both FF and DCP, multiple additives generated the narrowest, most-stable particle size distribution, with the smallest particles in suspension, compared with using a single additive. An industrially recognized freeze-drying process was used for the isolation of these nanoparticles to dryness. When processed by the liquid AS crystallization followed by freeze-drying in the presence of multiple additives, a purer monomorphic powder for FF resulted than when processed in the absence of any additive or in the presence of a single additive. It was noted that all nanoparticles freeze-dried in the presence of additives had a flat, flaky habit resulting in large surface areas. Agglomeration occurred during freeze-drying, resulting in micron-size particles. However, after freeze-drying, powders produced with single or multiple additives showed similar dissolution profiles, irrespective of aging time before drying, thus attenuating the advantage of multiple additives in terms of size observed before the freeze-drying process.

High resveratrol-loaded microcapsules with trehalose and OSA starch as the wall materials: Fabrication, characterization, and evaluation

To improve the solubility and stability of resveratrol (Res), Res nanocrystals (Res-ncs) as the capsule core were prepared by wet milling using hydroxypropyl methyl cellulose (HPMC_E5), sodium dodecyl sulfate (SDS), and polyvinylpyrrolidone (PVP_K30) as stabilizers, along with trehalose and octenyl succinic anhydride (OSA) modified starch were used as the wall material to produce Res microcapsules (Res-mcs) via spray drying. The fresh-prepared Res-ncs and rehydrated Res-mcs had mean particle sizes of 190.30 ± 3.43 and 204.70 ± 3.60 nm, zeta potentials of -13.90 ± 0.28 and - 11.20 ± 0.34 mV, and the loading capacities (LC) were as high as 73.03 % and 28.83 %. Particle morphology showed that Res-mcs had more regular and smooth spherical structures. FTIR indicated that Res may have hydrogen bonding with the walls. XRD and DSC exhibited that Res in nanocrystals and microcapsules existed mostly as amorphous structures. The solubility of Res-mcs and Res-ncs was increased, with excellent redispersibility and rapid dissolution of Res in vitro. The antioxidant properties of Res-mcs were protected and improved. With the walls acting as a physical barrier, Res-mcs have better photothermal stability than raw Res. Res-mcs have a relative bioavailability of 171.25 %, which is higher than that of raw Res.

Pharmacokinetics of ginkgolide B-lyophilized nanoparticles after intravenous injection in rats using liquid chromatography-tandem mass spectrometry

RATIONALE

Ginkgolide B (GB) performs diverse pharmacological activities but has poor water solubility. The currently available GB injections have a short half-life and are lethal when injected rapidly. We prepared GB-lyophilized nanoparticles (GB-NPs) using a new nonsurfactant polysaccharide polymer, ZY-010, as its carrier to regulate the release of GB in vivo. Here, the pharmacokinetics (PK) of GB-NPs after intravenous injection in rats was performed using liquid chromatography-tandem mass spectrometry (LC-MS/MS).

METHODS

The samples were separated on an Agilent Eclipse XDB-C 18 column (2.1 × 50 mm, 1.85 μm) maintained at 30°C. The MS/MS transitions of GB and glibenclamide as the internal standard (IS) were set at m/z 423.1 → 367.1 and m/z 492.1 → 367.0, respectively. The standard curve of GB content was constructed, and the specificity, sensitivity, precision, and extraction recovery of LC-MS/MS analysis were assessed. The main PK parameters were analyzed using DAS (Drug And Statistics for Windows) software, version 2.0.

RESULTS

The retention time of GB and IS at elution was 2.77 and 4.75 min, respectively. An excellent linear response across the concentration range of 0.001-100 μg/ml was achieved (r = 0.9997). The relative standard deviation value of precision was less than 10%. The total extraction recovery was above 80.76 ± 2.08%. The main PK parameters for the GB-NPs were as follows: t_1/2  = 69.32 h, AUC_{(0 → ∞)}  = 188 312.97 ± 143 312.41 μg/L h, CL = 0.03 ± 0.02 L/h/kg, and V = 0.09 ± 0.05 L/kg. The t_1/2 of the GB-NPs was significantly longer than that of GB solution, and AUC_{(0 → ∞)} of GB-NPs was about 1.4 times that of GB solution. The PK data demonstrated that the blood concentration of GB in rats conformed to a three-compartment model in both GB solution and GB-NPs.

CONCLUSION

A rapid and accurate LC-MS/MS method was established for the determination of GB-NPs in rats. GB-NPs exhibited a sustained-release behavior in vivo compared with GB solution.

Multi-directionally evaluating the formation mechanism of 1,4-dihydropyridine drug nanosuspensions through experimental validation and computer-aided drug design

The poor aqueous solubility of 1,4-dihydropyridine drugs needs to be solved urgently to improve the bioavailability. Nanotechnology can improve drug solubility and dissolution by reducing particle size, but usually a specific polymer or surfactant is required for stabilization. In this study, Poloxamer-407(P-407) was screened as the optimal stabilize through energy simulation, molecular docking and particle size. morphological study, X-ray diffraction, differential scanning calorimetry, Fourier transform infrared spectroscopy, Raman, in vitro dissolution test and molecular simulation of interactions were utilized to explore the formation mechanisms of four 1,4-dihydropyridine drugs/P-407 nanosuspensions. The result shows that the optimized nanosuspensions had the particle size in the nano-size range and maintained the original crystal state. The in vitro dissolution rate of the nanosuspension was 3-4 times higher than the corresponding API and could reduce the restriction of drug dissolution in different pH environments. Raman spectroscopy, FTIR and molecular docking simulations provided strong supporting evidence for the formation mechanism of 1,4-dihydropyridine drugs/P-407 nanosuspensions at the molecular level, which confirmed that the stable intermolecular hydrogen bond adsorption and hydrophobic interaction were formed between the drug and P-407. This research will provide practical concepts and technologies, which are helpful to develop nanosuspensions for the same class of drugs.

Chitosan-Alginate-Pectin-coated Suspended-Liquid-Encapsulating (CAPSuLE) marbles for therapeutic agent storage and delivery

Developing a cutting-edge system capable of ensuring long-lasting functionality of therapeutic agents and implementing diverse delivery modes is challenging. A quasi-spherical triple-layered capsule containing suspended liquid droplets and allowing multi-modal delivery of therapeutic agents in the aqueous phase was developed, primarily by adopting the core principles for creating liquid marbles. A naturally derived wettable polysaccharide-pectin-was utilized as a liquid-air interfacial barrier to keep the liquid droplets in the core zone. To tailor the pectin-coated droplet as a therapeutic agent carrier, anionic alginate and cationic chitosan layers were sequentially formed via additional interactions: physically stacking substances with structural chirality (pectin-alginate) and inducing electrostatic association to create the reversible complex coacervates (alginate-chitosan). The resulting system, which is called a Chitosan-Alginate-Pectin-coated Suspended-Liquid-Encapsulating (CAPSuLE) marble, had sufficient mechanical strength to resist external harsh environments and exhibited unique features: ecofriendly sustainability, responsiveness to external stimuli, coacervate-driven coalescence for linking adjacent marbles, and a self-repairing ability. The proposed CAPSuLE system can facilitate the adoption of the liquid-marble concept to biomedical fields, extending its applicability in the fields of biology and applied engineering.

Polymeric Nanoparticles-Based Brain Delivery with Improved Therapeutic Efficacy of Ginkgolide B in Parkinson's Disease

Purpose

Ginkgolide B (GB) is a terpene lactone derivative of Ginkgo biloba that is believed to function in a neuroprotective manner ideal for treating Parkinson’s disease (PD). Despite its promising therapeutic properties, GB has poor bioavailability following oral administration and cannot readily achieve sufficient exposure in treated patients, limiting its clinical application for the treatment of PD. In an effort to improve its efficacy, we utilized poly(ethylene glycol)-co-poly(ε-caprolactone) (PEG-PCL) nanoparticles as a means of encapsulating GB (GB-NPs). These NPs facilitated the sustained release of GB into the blood, thereby improving its ability to accumulate in the brain and to treat PD.

Methods and Results

Using Madin-Darby canine kidney (MDCK) cells, we were able to confirm that these NPs could be taken into cells via multiple nonspecific mechanisms including micropinocytosis, clathrin-dependent endocytosis, and lipid raft/caveolae-mediated endocytosis. Once internalized, these NPs tended to accumulate in the endoplasmic reticulum and lysosomes. In zebrafish, we determined that these NPs were readily able to undergo transport across the chorion, gastrointestinal, blood–brain, and blood-retinal barriers. In a 1-methyl-4-phenylpyridinium ion (MPP⁺)-induced neuronal damage model system, we confirmed the neuroprotective potential of these NPs. Following oral administration to rats, GB-NPs exhibited more desirable pharmacokinetics than did free GB, achieving higher GB concentrations in both the brain and the blood. Using a murine PD model, we demonstrated that these GB-NPs achieved superior therapeutic efficacy and reduced toxicity relative to free GB.

Conclusion

In conclusion, these results indicate that NPs encapsulation of GB can significantly improve its oral bioavailability, cerebral accumulation, and bioactivity via mediating its sustained release in vivo.

Polypeptide and glycosaminoglycan polysaccharide as stabilizing polymers in nanocrystals for a safe ocular hypotensive effect

Improved ocular delivery of a poorly soluble anti-glaucoma drug, acetazolamide (ACZ), in a stable nanosuspension (NS) was the main target of the study. The anionic polypeptide, poly-γ-glutamic acid (PG) and the glycosaminoglycan, hyaluronic acid, were used to stabilize ACZ-NS prepared using the antisolvent precipitation (AS-PT) coupled with sonication technique. To endue in site biocompatibility with high tolerability, soya lecithin (SL) phospholipid has been also combined with polyvinyl alcohol (PVA). NS with uniform PS in the range 100-300 nm, high ζ > ±20 mV, and enhanced saturation solubility were produced. Targeting solvent removal with control on future particle growth, post-production processing of NS was done using spray drying. The carriers' composition and amount relative to ACZ-NS were optimized to allow for the production of a redispersible dry crystalline powder. Particles crystallinity was confirmed using X-ray powder diffraction (XRPD) and differential scanning calorimetry (DSC) in liquid and spray dried NS. The modified Draize test proved the safety and tolerability following application to rabbit eyes accompanying an efficient ocular hypotensive activity using a steroid glaucoma model.

Investigation of Formulation and Process Parameters of Wet Media Milling to Develop Etodolac Nanosuspensions

PURPOSE

Etodolac (ETD) is one of the non-steroidal anti-inflammatory drugs which has low aqueous solubility issues. The objective of this study was to develop ETD nanosuspensions to improve its poor aqueous solubility properties while investigating formulation and process parameters of wet media milling method via design of experiment (DoE) approach.

METHODS

The critical formulation parameters (CFP) were selected as ETD amount, stabilizer type and ratio as well as critical process parameters (CPP) which were bead size, milling time and milling speed. The two-factorial-2³ and The Box-Benkhen Designs were generated to evaluate CFP and CPP, respectively. Particle size (PS), polydispersity index (PDI) and zeta potential (ZP) were analyzed as dependent variables. Characterization, physical stability and solubility studies were performed.

RESULTS

Optimum nanosuspensions stabilized by PVP K30 and Poloxamer 188 showed 188.5 ± 1.6 and 279.3 ± 6.1 nm of PS, 0.161 ± 0.049 and 0.345 ± 0.007 PDI, 14.8 ± 0.3 and 16.5 ± 0.4 mV of ZP values, respectively. The thermal properties of ETD did not change after milling and lyophilization process regarding to DSC analysis. Also, the crystalline state of ETD was preserved. The morphology of particle was smooth and spherical on SEM. The dry-nanosuspensions stayed physically stable for six months at room temperature. The solubility of nanosuspensions increased up to 13.0-fold in comparison with micronized ETD.

CONCLUSIONS

In conclusion, it is found that the poor solubility issue of ETD can be solved by nanosuspension. DoE approach provided benefits such as reducing number of experiments, saving time and improving final product quality by using wet media milling.

Improvement of the pharmacokinetic/pharmacodynamic relationship in the treatment of invasive aspergillosis with voriconazole. Reduced drug toxicity through novel rapid release formulations

Voriconazole (VCZ) is currently the first-line treatment for invasive aspergillosis, although the doses are limited by its poor solubility and high hepatic toxicity. The aim of this study was to develop a solid self-dispersing micellar system of VCZ to improve the pharmacokinetic/pharmacodynamic (PK/PD) relationship and reduce hepatotoxicity. In this work, solid micellar systems of VCZ are formulated with different polysorbate 80 ratios using mannitol as a hydrophilic carrier. The novel micellar systems were characterized by scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC) and dissolution studies. Self-dispersing micellar systems reduced VCZ crystallinity, leading to an improvement in its dissolution rate. The in vitro susceptibility test also revealed that the most common microorganisms in invasive aspergillosis exhibited low minimum inhibitory concentration (MIC) values for micellar systems. Pharmacokinetic studies indicated an improvement in bioavailability for MS-1:3:0.05, and changes in its biodistribution to different organs. MS-1:3:0.05 showed an increased concentration in lungs and a significant decrease in VCZ accumulated in the liver.