Controlled release of lysozyme based core/shells structured alginate beads with CaCO3 microparticles using Pickering emulsion template and in situ gelation

Carboxymethyl cellulose/sodium alginate beads incorporated with calcium carbonate nanoparticles and bentonite for phosphate recovery

Although anionic polyelectrolyte hydrogel beads offer attractive adsorption of cationic dyes, phosphate adsorption is limited by electrostatic interactions. In this work, carboxymethyl cellulose (CMC)/sodium alginate (SA) hydrogel beads were modified with calcium carbonate (CaCO₃) and/or bentonite (Be). The compatibility between CaCO₃ and Be was proven by the homogeneous surface, as shown in the scanning electron microscopic images. Fourier-transform infrared and X-ray diffraction spectra further confirmed the existence of inorganic filler in the hydrogel beads. Although CMC/SA/Be/CaCO₃ hydrogel beads attained the highest methylene blue and phosphate adsorption capacities (142.15 MB mg/g, 90.31 P mg/g), phosphate adsorption was significantly improved once CaCO₃ nanoparticles were incorporated into CMC/SA/CaCO₃ hydrogel beads. The kinetics of MB adsorption by CMC/SA hydrogel beads with or without inorganic fillers could be described by the pseudo-second-order model under chemical interactions. The phosphate adsorption by CMC/SA/Be/CaCO₃ hydrogel beads could be explained by the Elovich model due to heterogeneous properties. The incorporation of Be and CaCO₃ also improved the phosphate adsorption through chemical interaction since Langmuir isotherm fitted the phosphate adsorption by CMC/SA/Be/CaCO₃ hydrogel beads. Unlike MB adsorption, the reusability of these hydrogel beads in phosphate adsorption reduced slightly after 5 cycles.

A Double-Layer Hydrogel Dressing with High Mechanical Strength and Water Resistance Used for Drug Delivery

Hydrogel dressings provide a moist wound healing environment, absorb the exudates of the wound, and have better biocompatibility than traditional dressings. However, it is still difficult to meet the needs of modern medicine due to the defects in drug burst release, weak mechanical strength, and poor water retention. To solve these problems, we developed a double-layer (DL) hydrogel based on β-cyclodextrin polymer (β-CDP), poly(vinyl alcohol) (PVA), and carboxymethyl cellulose sodium (CMC) via a layer-by-layer method. Inspired by natural coconut, this hydrogel consisted of a drug release layer (DRL) and a mechanical support layer (MSL). In our design, the introduction of β-CDP into the DRL slowed the drug release rate of the DL hydrogel. Furthermore, the mechanical strength of the hydrogel was improved by immersing the MSL in a calcium chloride/boric acid solution. Combining these two layers, the tensile strength and elongation at break of the DL hydrogel reached 1504 kPa and 400%, respectively. More interestingly, the release mechanism of DL hydrogel conformed to the diffusion-relaxation-erosion model, which was different from traditional hydrogel dressings. Therefore, the as-prepared DL structure represents a feasible solution for fabricating high-performance mechanical hydrogel dressings with sustained drug release properties, and the DL hydrogel has potential to be used for medical dressings applied in daily life.

A Review of Pickering Emulsions: Perspectives and Applications

Pickering emulsions are systems composed of two immiscible fluids stabilized by organic or inorganic solid particles. These solid particles of certain dimensions (micro- or nano-particles), and desired wettability, have been shown to be an alternative to conventional emulsifiers. The use of biodegradable and biocompatible stabilizers of natural origin, such as clay minerals, presents a promising future for the development of Pickering emulsions and, with this, they deliver some advantages, especially in the area of biomedicine. In this review, the effects and characteristics of microparticles in the preparation and properties of Pickering emulsions are presented. The objective of this review is to provide a theoretical basis for a broader type of emulsion, in addition to reviewing the main aspects related to the mechanisms and applications to promote its stability. Through this review, we highlight the use of this type of emulsion and its excellent properties as permeability promoters of solid particles, providing ideal results for local drug delivery and use in Pickering emulsions.

Effect of emulsification methods on the physicochemical properties of emulsion stabilized by calcium carbonate and sodium alginate

Our lab’s studies have found that heavy calcium carbonate (CaCO₃) with sodium alginate (SA) can synergistically stabilize Pickering emulsion. However, there were significant differences in the flow characteristics of the emulsions obtained by different preparation methods during storage. Herein, in this current work, Pickering emulsions were prepared by two-step emulsifying method (SA was added into the primary emulsion stabilized by CaCO₃ for secondary shearing, M1) and one-step emulsifying method (oil phase was added to homogeneous dispersed CaCO₃-SA solution for one-step shearing, M2), respectively. The particle size, microstructure, rheology and microrheological properties of these two kinds of emulsions and the interaction of CaCO₃ with SA were analyzed. The results showed that the droplet size of M1 emulsion was 21.78–49.62 μm, and that of M2 emulsion was 6.50–11.87 μm. M1 emulsion had stronger viscoelasticity, and could transform into a gel state during storage. However, M2 emulsion remained in flow condition all the time which was related to the interaction between SA and CaCO₃ in the aqueous phase.

Pickering emulsion hydrogel based on alginate-gellan gum with carboxymethyl chitosan as a pH-responsive controlled release delivery system

Pickering emulsion hydrogels (PEHs) were developed as a pH-responsive, controlled-release delivery system to address the limitations of Pickering emulsions in some harsh processing or gastrointestinal conditions. Specifically, the PEHs were fabricated based on alginate and various concentrations of gellan gum (GG) with carboxymethyl chitosan (CMCS) matrix. The encapsulation efficiency (EE), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) results proved the successful encapsulation. Furthermore, the hydrogels remained stable in the presence of destabilizing ions (Na⁺ or phosphate ions) and high osmotic pressure mediums. The texture profile analysis (TPA) characteristics and Young's modulus of the 0.8 % GG (w/v) PEHs were superior to the others. The PEHs prevented the emulsions from being released at pH 2.0, while the emulsions were entirely released at pH 7.4 in vitro, with the rate of release controlled by CMCS and the degree by GG concentration. This work facilitates the delivery of Pickering emulsions with excellent stability and pH-responsive controlled release for hydrophobic actives in food applications.

Hard, Soft, and Hard-and-Soft Drug Delivery Carriers Based on CaCO3 and Alginate Biomaterials: Synthesis, Properties, Pharmaceutical Applications

Because free therapeutic drug molecules often have adverse effects on normal tissues, deliver scanty drug concentrations and exhibit a potentially low efficacy at pathological sites, various drug carriers have been developed for preclinical and clinical trials. Their physicochemical and toxicological properties are the subject of extensive research. Inorganic calcium carbonate particles are promising candidates as drug delivery carriers owning to their hardness, porous internal structure, high surface area, distinctive pH-sensitivity, low degradability, etc, while soft organic alginate hydrogels are also widely used because of their special advantages such as a high hydration, bio-adhesiveness, and non-antigenicity. Here, we review these two distinct substances as well as hybrid structures encompassing both types of carriers. Methods of their synthesis, fundamental properties and mechanisms of formation, and their respective applications are described. Furthermore, we summarize and compare similarities versus differences taking into account unique advantages and disadvantages of these drug delivery carriers. Moreover, rational combination of both carrier types due to their performance complementarity (yin-&yang properties: in general, yin is referred to for definiteness as hard, and yang is broadly taken as soft) is proposed to be used in the so-called hybrid carriers endowing them with even more advanced properties envisioned to be attractive for designing new drug delivery systems.

Biodegradable Microparticles for Regenerative Medicine: A State of the Art and Trends to Clinical Application

Tissue engineering and cell therapy are very attractive in terms of potential applications but remain quite challenging regarding the clinical aspects. Amongst the different strategies proposed to facilitate their implementation in clinical practices, biodegradable microparticles have shown promising outcomes with several advantages and potentialities. This critical review aims to establish a survey of the most relevant materials and processing techniques to prepare these micro vehicles. Special attention will be paid to their main potential applications, considering the regulatory constraints and the relative easiness to implement their production at an industrial level to better evaluate their application in clinical practices.

Selective recognition of tetracycline residues in animal derived samples based on molecularly imprinted microspheres from silica-stabilised Pickering emulsion polymerisation

Novel molecularly imprinted polymers for selective binding of tetracyclines were synthesised through oil-in-water Pickering emulsion polymerisation with SiO₂ particles as stabilisers. The products were used for solid phase extraction coupled with high-performance liquid chromatography to detect trace tetracycline and oxytetracycline in animal-derived samples. The SPE materials were characterised in detail by Fourier transform infrared spectrometry, scanning electron microscopy and thermogravimetry analysis. The imprinted polymers displayed high adsorption capacity, fast binding process and high selectivity through evaluation of adsorption performance employing kinetic, static adsorption and selectivity experiments. Under optimum detection conditions, good linearity (12 to 121 µg kg^-1) and limits of detection (1.8 to 1.9 μg kg^-1) for tetracyclines were obtained. In addition, satisfactory recoveries of 75% to 115 % were also achieved by spiking tetracyclines into milk, chicken, fish and pork samples, giving direct evidence of real practicality of our proposed separation method.

Pickering emulsion-templated ionotropic gelation of tocotrienol microcapsules: effects of alginate and chitosan concentrations and gelation process parameters

BACKGROUND

Throughout the past decade, Pickering emulsion has been increasingly utilized for the encapsulation of bioactive compounds due to its high stability and biocompatibility. In the present work, palm tocotrienols were initially encapsulated in a calcium carbonate Pickering emulsion, which was then subjected to alginate gelation and subsequent chitosan coating. The effects of wall material (alginate and chitosan) concentrations, gelation pH and time, and chitosan coating time on the encapsulation efficiency of palm tocotrienols were explored.

RESULTS

Our findings revealed that uncoated alginate microcapsules ruptured upon drying and exhibited low encapsulation efficiency (13.81 ± 2.76%). However, the addition of chitosan successfully provided a more complex and rigid external wall structure to enhance the stability of the microcapsules. By prolonging the crosslinking time from 5 to 30 min and increasing the chitosan concentration from 0.1% to 0.5%, the oil encapsulation efficiency was increased by 28%. Under the right gelation pH (pH 4), the extension of gelation time from 1 to 12 h resulted in an increase in alginate-Ca²⁺ crosslinkings, thus strengthening the microcapsules.

CONCLUSION

With the optimum formulation and process parameters, a high encapsulation efficiency (81.49 ± 1.75%) with an elevated oil loading efficiency (63.58 ± 2.96%) were achieved. The final product is biocompatible and can potentially be used for the delivery of palm tocotrienols. © 2021 Society of Chemical Industry.

Incorporation of nanogels within calcite single crystals for the storage, protection and controlled release of active compounds

Nanocarriers have tremendous potential for the encapsulation, storage and delivery of active compounds. However, current formulations often employ open structures that achieve efficient loading of active agents, but that suffer undesired leakage and instability of the payloads over time. Here, a straightforward strategy that overcomes these issues is presented, in which protein nanogels are encapsulated within single crystals of calcite (CaCO3). Demonstrating our approach with bovine serum albumin (BSA) nanogels loaded with (bio)active compounds, including doxorubicin (a chemotherapeutic drug) and lysozyme (an antibacterial enzyme), we show that these nanogels can be occluded within calcite host crystals at levels of up to 45 vol%. Encapsulated within the dense mineral, the active compounds are stable against harsh conditions such as high temperature and pH, and controlled release can be triggered by a simple reduction of the pH. Comparisons with analogous systems - amorphous calcium carbonate, mesoporous vaterite (CaCO3) polycrystals, and calcite crystals containing polymer vesicles - demonstrate the superior encapsulation performance of the nanogel/calcite system. This opens the door to encapsulating a broad range of existing nanocarrier systems within single crystal hosts for the efficient storage, transport and controlled release of various active guest species.

Alkaline phosphatase-responsive Zn2+ double-triggered nucleotide capped gold nanoclusters/ alginate hydrogel with recyclable nanozyme capability

A novel hydrogel loaded with adenosine 5'-monophosphate capped Au nanoclusters (AuAMP NCs) is fabricated in a gentle route by double-triggering of Zn2+. This built-in fluorescent hydrogel material not only has good optical properties of Au NCs, but also possesses excellent mechanical structure of hydrogel materials. Free phosphate ions may trigger the devastation of the "egg-box" structure of the as-prepared ZnSA-AuAMP hydrogel, thus releasing the immobilized fluorescent AuAMP NCs, with a release efficiency up to 93.62% within 3 h. On this basis, a fast, sensitive fluorescent detection method for alkaline phosphatase (ALP) is achieved, with a linear detection of ALP in the range of 0.47-10.03 U/L and a limit of detection of 0.09 U/L. This allows the accurate detection of ALP in diluted human serum samples. Last but not least, the ZnSA-AuAMP hydrogel also exhibits peroxidase-like activity with good recyclability, because it is facile to be separated and extracted from catalytic reaction buffer. This work suggests that hydrogels may act as an inexpensive container for controllable regulation of nanozyme activity.