Enzyme cum pH dual-responsive controlled release of avermectin from functional polydopamine microcapsules

Fabrication of Eco-Friendly Hydrolyzed Ethylene-Maleic Anhydride Copolymer-Avermectin Nanoemulsion with High Stability, Adhesion Property, pH, and Temperature-Responsive Releasing Behaviors

In this study, novel amphiphilic polymer emulsifiers for avermectin (Avm) were synthesized facilely via the hydrolysis of ethylene-maleic anhydride copolymer (EMA) with different agents, and their structures were confirmed by various techniques. Then, water-based Avm-nanoemulsions were fabricated with the emulsifiers via phase inversion emulsification process, and superior emulsifier was selected via the emulsification effects. Using the superior emulsifier, an optimal Avm-nanoemulsion (defined as Avm@HEMA) with satisfying particle size of 156.8 ± 4.9 nm, encapsulation efficiency (EE) of 69.72 ± 4.01% and drug loading capacity (DLC) of 54.93 ± 1.12% was constructed based on response surface methodology (RSM). Owing to the emulsifier, the Avm@HEMA showed a series of advantages, including high stability, ultraviolet resistance, low surface tension, good spreading and high affinity to different leaves. Additionally, compared to pure Avm and Avm-emulsifiable concentrate (Avm-EC), Avm@HEMA displayed a controlled releasing feature. The encapsulated Avm was released quite slowly at normal conditions (pH 7.0, 25 °C or 15 °C) but could be released at an accelerated rate in weak acid (pH 5.5) or weak alkali (pH 8.5) media or at high temperature (40 °C). The drug releasing profiles of Avm@HEMA fit the Korsmeyer-Peppas model quite well at pH 7.0 and 25 °C (controlled by Fickian diffusion) and at pH 7.0 and 10 °C (controlled by non-Fickian diffusion), while it fits the logistic model under other conditions (pH 5.5 and 25 °C, pH 8.5 and 25 °C, pH 7.0 and 40 °C).

Degradable PDA@PNIPAM-TA Nanocomposites for Temperature- and NIR light-Controlled Pesticide Release

Controlled pesticide delivery systems offer many distinctive advantages over conventional pesticide formulations. In this work, degradable poly(N-isopropylacrylamide) (PNIPAM)-tannic acid (TA) microgels and multifunctional PDA@PNIPAM-TA nanocomposites were prepared in a high-gravity rotating packed bed reactor (RPB) for smart pesticide delivery and release. The as-prepared microgels and nanocomposites showed reversible temperature-dependent swelling/deswelling behavior and irreversible pH-induced degradation. A dynamic contact angle test suggested that the introduction of TA and PDA into the PNIPAM matrix could enhance foliar adhesion and deposition efficiency. The nanocomposites were further used for the encapsulation and delivery of imidacloprid (IMI) to protect it from rapid photolysis and improve its pest-control efficiency. Their thermoresponsive behavior as well as pesticide loading capacity could be tuned by tailoring the PNIPAM-TA shell thickness, which could be varied by the NIPAM amount. The release rate of IMI from the core/shell nanocomposites was positively correlated with environmental temperature and near-infrared (NIR) light, which was adaptive to the positive temperature-dependent toxicity correlation of IMI and the increasing trend of pests under high temperature. The cumulative release of IMI was 23.5% at 25 °C, while it was 81.2% at 40 °C after 24 h of incubation, and the release rate was greatly enhanced under NIR irradiation. The results indicated that the facile control of pesticide release could be realized by regulating environmental conditions. This work also provides an idea for using high-gravity technology to conveniently construct a smart, effective, and environmentally friendly pesticide delivery system for sustainable crop protection.

Promising Delivery Platform for Smart Pest Control with High Water-Retaining Capacity

Hydrogels have been extensively used in agriculture to improve crop yields for their excellent properties. However, they are currently used either as pesticide delivery platforms or water retention agents alone; the combination of these two functions into one agricultural hydrogel formulation has never been reported, which is crucial to promote sustainable development in agriculture. Herein, using poly(β-cyclodextrin) and adamantane-grafted poly(acrylic acid) (PAA-Ada) as the host and guest, respectively, an easy operating, multi-responsive, and safer hydrogel delivery system for insecticides is fabricated by the host-guest interaction between cyclodextrin and adamantane, which can load uniformly dispersed insecticides (fipronil, imidacloprid, and thiamethoxam) up to 60%. Benefiting from the carboxyl and hydroxyl groups on polymer chains, different temperatures (25, 35, and 45 °C) and pH values (5.0, 6.8, and 10.0) change the intermolecular forces within the hydrogel network and then the diffusion of the content, finally resulting in controlled release behaviors. Besides, this platform can rapidly release the insecticides in the presence of amyloglucosidase due to its ring-opening effect on cyclodextrin. Moreover, this platform exhibits high water-retaining capacity toward soil, which can increase the maximum water absorption of nutrient soil and quartz sand by 31.6 and 13.9%, respectively, and slows down the water loss. Compared with commercial formulation, this smart system reduces the acute toxicity to non-target organism earthworms by 52.4% and improves the efficacy against target organism aphids by 47.3%, showing better durability, lower environmental toxicity, and higher efficiency. To our knowledge, this is the first idea that simultaneously adopts the water-retaining capacity and controlled release ability of hydrogels to improve insecticide efficacy. In this regard, this smart hydrogel platform holds great potentials as slow-release granules with water-holding ability for protection against insect pests, providing an alternative platform for the sustainable development in green agriculture.

Preparation and characterization of emamectin benzoate nanocapsules based on the dual role of polydopamine

BACKGROUND

Developing pesticide-controlled release formulations with foliage adhesion has become the focus of current research in the field of crop protection. In this study, an excellent adhesive nanocapsule loaded with emamectin benzoate (Eb@PDA) was prepared via emulsion interfacial polymerization based on the self-polymerization ability and adhesion properties of polydopamine (PDA).

RESULTS

The physicochemical properties of the Eb@PDA were characterized by scanning electron microscopy, transmission electron microscopy, particle size statistics, Fourier transform infrared spectroscopy and X-ray diffraction. The Eb@PDA presented a regular spherical shape, with an average particle size of 163.8 nm. Compared with conventional formulations, it had higher pesticide-loading content (34%) and excellent adhesion onto corn leaf. In addition, Eb@PDA showed sustained-release characteristics, facilitating the release of Eb at low pH and high temperature. Eb@PDA could effectively protect Eb against photodegradation and had a longer effective period for controlling Spodoptera frugiperda and Spodoptera exigua. Furthermore, acute toxicity tests showed that the 50% lethal concentration (LC₅₀ ) was 80.91 and 57.91 mg kg^-1 at 7 and 14 days, respectively, indicating a lower toxicity of the Eb@PDA to earthworms. The cells (L02) treated with Eb@PDA showed a higher cell viability but a lower apoptosis rate (only 5.75%), demonstrating the lower cytotoxicity of the Eb@PDA.

CONCLUSION

The self-prepared Eb@PDA could be used as a formulation with the advantages of slow release, UV shielding, strong leaf adhesion, superior insecticidal properties, sustained effectiveness and biosafety. It will also facilitate the development of an efficient and safe pesticide delivery system. © 2022 Society of Chemical Industry.

A Star Polyamine-Based Nanocarrier Delivery System for Enhanced Avermectin Contact and Stomach Toxicity against Green Peach Aphids

The unscientific application of synthesized/botanical pesticides has not only brought the resistance of plant pathogens and pests, but also led to serious environmental pollution. In recent years, various nano-delivery systems have been used for the development of environmental-friendly pesticides with improved efficacy. Herein, the current study constructed an efficient avermectin B1a (AVM) nano-delivery system based on a star polyamine (SPc) and focused on the characterization and bioactivity of SPc-loaded AVM at various mass ratios. The hydroxyl groups of AVM could assemble with carbonyl groups of SPc through hydrogen bond and van der Waals forces, and the self-assembly of AVM and SPc formed nearly spherical particles of AVM/SPc complex with nanoscale size. The contact angle of SPc-loaded AVM decreased with the increasing mass ratio of SPc, revealing the easier distribution and spreading of the AVM/SPc complex. Furthermore, the stomach and contact toxicity of AVM/SPc complex also increased along with the increasing SPc mass ratio, which could be attributed to the enhanced systemic transportation in plants, enlarged contact area to insect pests and stronger permeability across the insect cuticle. The current study provides an efficient nano-delivery system for increasing stomach and contact toxicity of pesticides with wide applications in the agricultural field.

A pH Dual-Responsive Multifunctional Nanoparticle Based on Mesoporous Silica with Metal-Polymethacrylic Acid Gatekeeper for Improving Plant Protection and Nutrition

Integrating pesticides and mineral elements into a multi-functional stimuli-responsive nanocarrier can have a synergistic effect on protecting plants from pesticides and the supply of nutrients. Herein, a pH dual-responsive multifunctional nanosystem regulated by coordination bonding using bimodal mesoporous silica (BMMs) as a carrier and coordination complexes of ferric ion and polymethacrylic acid (PMAA/Fe³⁺) as the gatekeeper was constructed to deliver prochloraz (Pro) for the smart treatment of wilt disease (Pro@BMMs−PMAA/Fe³⁺). The loading capacity of Pro@BMMs−PMAA/Fe³⁺ nanoparticles (Nps) was 24.0% and the “PMMA/Fe³⁺” complexes deposited on the BMMs surface could effectively protect Pro against photodegradation. The nanoparticles possessed an excellent pH dual-responsive release behavior and better inhibition efficacy against Rhizoctonia solani. Fluorescence tracking experiments showed that Nps could be taken up and transported in fungi and plants, implying that non-systemic pesticides could be successfully delivered into target organisms. Furthermore, BMMS−PMAA/Fe³⁺ nanocarriers could effectively promote the growth of crop seedlings and had no obvious toxicological influence on the cell viability and the growth of bacteria. This study provides a novel strategy for enhancing plant protection against diseases and reducing the risk to the environment.

Construction of a photothermal controlled-release microcapsule pesticide delivery system

This study aimed to achieve the controlled-release of bioactive ingredients in microcapsule pesticide delivery systems. A photothermal controlled-release microcapsule pesticide delivery system was constructed using chitosan and polydopamine (PDA) as the wall materials to encapsulate avermectin. All the prepared microcapsules were characterized by the methods of optical microscopy, scanning electron microscopy, transmission electron microscopy, and Fourier-transform infrared spectroscopy. The slow-release, UV-shielding, photothermal performance, and the nematicidal activity of the prepared microcapsules were also systematically investigated. The results indicated that the prepared microcapsules had excellent slow-release and UV-shielding performance when further encapsulated with the PDA layer relative to those of the non-PDA-encapsulated products. The photothermal sensitivity of the AVM@CS/CMA/PDA composite microcapsule under the irradiation of near-infrared light (NIR) was dramatically enhanced with the photothermal conversion efficiency (η) of 14.93%. Furthermore, the nematicidal activity of the AVM@CS/CMA/PDA composite microcapsule system was effectively improved on exposure to the irradiation of a light-emitting diode (LED) full-spectrum light. The strategies used in this study for developing the photothermal controlled-release pesticide delivery system might play an important role on improving utilization of pesticides.

A photothermal controlled-release microcapsule pesticide delivery system was constructed using chitosan and polydopamine as the wall materials to encapsulate avermectin, the utilization rate of avermectin was improved.

Advances in Controlled-Release Pesticide Formulations with Improved Efficacy and Targetability

Pesticides are commonly used in modern agriculture and are important for global food security. However, postapplication losses due to degradation, photolysis, evaporation, leaching, surface runoff, and other processes may substantially reduce their efficacy. Controlled-release formulations can achieve the permeation-regulated transfer of an active ingredient from a reservoir to a target surface. Thus, they can maintain an active ingredient at a predetermined concentration for a specified period. This can reduce degradation and dissipation and other losses and has the potential to improve efficacy. Recent developments in controlled-release technology have adapted the concepts of intelligence and precision from the pharmaceutical industry. In this review, we present recent advances in the development of controlled-release formulations and discuss details of the preparation methods, material improvements, and application technologies.

Basic Amino Acid-Modified Lignin-Based Biomass Adjuvants: Synthesis, Emulsifying Activity, Ultraviolet Protection, and Controlled Release of Avermectin

Avermectin (AVM) is a highly effective and safe biopesticide but is very sensitive to ultraviolet (UV) light and exhibits poor water solubility. Developing green and multifunctional adjuvants is important for the protection and controlled release of AVM. In this work, a number of water-soluble enzymatic hydrolysis lignins (W-EHLs) were prepared via grafting basic amino acids and used as emulsifiers with co-surfactants to prepare high-internal phase emulsions (HIPEs). The results showed that W-EHLs with co-surfactants could be prepared with HIPEs that contained 90 vol % green oil phases such as turpentine, and the stability of the HIPEs first increased and then decreased when the rate of grafting of basic amino acids on lignin increased from 0.26 to 1.46 mmol/g. The more polar oil droplets were less deformable due to their higher viscosity, thereby affording a stability advantage to HIPEs. Subsequently, the relations between the stability and interfacial viscoelasticity of the emulsion were effectively correlated by interfacial rheology, droplet size, and physical stability tests. The results showed that HIPEs with smaller droplets had poor fluidity and strong interfacial viscoelasticity due to their higher droplet packing density, which resulted in good macroscopic stability. Like the AVM carrier, the retention rate of AVM in HIPEs was 80.1% after UV radiation for 72 h, which represented the highest UV protection efficiency in AVM delivery systems. The release curves showed that the rate of release of AVM from HIPEs was adjusted by controlling the pH value of the medium. In addition, the release of HIPEs is completely in accord with both diffusion and the matrix erosion mechanism. The strategy could be extended to other sensitive pesticides and used to promote the development of sustainable agriculture.

Preparation of thermosensitive buprofezin-loaded mesoporous silica nanoparticles by the sol-gel method and their application in pest control

BACKGROUND

Environmental stimuli-responsive release is one important way to reduce the dosage of pesticide, increase the usage efficiency and improve environmental compatibility.

RESULTS

On this basis, we synthesized mesoporous silica nanoparticles (MSNs) and modified them to develop a thermosensitive pesticide controlled release formulation (CRF). In this study, MSNs prepared by the sol-gel method were used as the core, poly (N-IsoPropylAcrylaMide) [P (NIPAM-MAA)] was used as the shell, and buprofezin (Bup) was loaded by adsorption. The prepared Bup@MSNs@P(NIPAM-MAA) could effectively prevent the degradation of buprofezin under UV light and exhibited excellent adhesion to rice leaves. The bioassay results showed that the mortality of Nilaparvata lugens (Stål) treated by Bup@MSNs@P(NIPAM-MAA) was positively correlated with temperature, resulting mainly from the change of release amount of buprofezin caused by temperature variation. Bup@MSNs@P(NIPAM-MAA) had long duration (20 days) for controlling N. lugens, and did not hinder the growth of rice. Meanwhile, Bup@MSNs@P(NIPAM-MAA) had low toxicity to zebrafish and human pneumonocyte BEAS-2B cells.

CONCLUSION

This novel thermosensitive pesticide CRF can be applied widely to other insecticides, thus greatly promoting the development of intelligent pesticide formulations. © 2021 Society of Chemical Industry.

MXene (Ti3C2) Based Pesticide Delivery System for Sustained Release and Enhanced Pest Control

A multifunctional nanomaterials based pesticide delivery system provides a powerful strategy for the efficient utilization of pesticides. We present here the application of a 2D MXene (Ti₃C₂) nanomaterial for pesticide delivery and plant protection. Avermectin (AV), a hydrophobic and unstable insecticide, was chosen as the model pesticide. In our study, AV@Ti₃C₂ was formed by fast adsorption of AV on Ti₃C₂, with a maximum loading capacity of 81.44%. Compared with hydrophobic AV, AV@Ti₃C₂ exhibited significantly improved water solubility, which is beneficial for ensuring the bioactivity of pesticide. The AV@Ti₃C₂ nanoformulation showed pH responsive slow-release behavior, overcoming the burst-release of conventional AV formulations. Besides, AV@Ti₃C₂ possessed excellent photostability under UV irradiation, which prolonged the persistent period of AV. Therefore, AV@Ti₃C₂ performed sustaining and enhanced antipest activity, according to the bioactivity assay. Furthermore, AV@Ti₃C₂ showed satisfactory biosafety, with no negative effect to the germination and growth of maize. Our current research provides a potential candidate, AV@Ti₃C₂, for pest control, and also broadens the application of 2D MXene materials in plant protection and sustainable agriculture.

Stimuli-responsive Ca-alginate-based photothermal system with enhanced foliar adhesion for controlled pesticide release

For minimizing volatilization and leaching of pesticides, and enhancing their residence time on crop surfaces, we synthesized and characterized a novel intelligent pesticide delivery system. Therein, imidacloprid (IMI) was adsorbed by polydopamine modified kaolin (PK) with high adsorption property through hydrogen bonds. Ca-alginate was used as a structural matrix of the system and a protective shell to hinder the pesticide burst release from PK, and endowed the system with unique pH-sensitive property for IMI release. The amino silicone oil (ASO) coating could bind with the waxy layer of crop leaves by the theory of "similarity-intermiscibility", which increased the adhesion of composite on crop leaves. Moreover, by the excellent light-sensitive property of detonation nanodiamond (DND) and temperature-responsive performance of poly(N-isopropylacrylamide) (PNIPAm), the release of IMI from the functional system could be adjusted by sunlight. Besides, the composite displayed high control efficacy. This novel composite can promote the targeting ability and utilization efficiency of pesticides, thus having a huge potential application prospect in agriculture.

Polydopamine-Modified Metal-Organic Frameworks, NH2-Fe-MIL-101, as pH-Sensitive Nanocarriers for Controlled Pesticide Release

Recently, metal-organic frameworks (MOFs) have become a dazzling star among porous materials used in many fields. Considering their intriguing features, MOFs have great prospects for application in the field of sustainable agriculture, especially as versatile pesticide-delivery vehicles. However, the study of MOF-based platforms for controlled pesticide release has just begun. Controlled pesticide release responsive to environmental stimuli is highly desirable for decreased agrochemical input, improved control efficacy and diminished adverse effects. In this work, simple, octahedral, iron-based MOFs (NH2-Fe-MIL-101) were synthesized through a microwave-assisted solvothermal method using Fe3+ as the node and 2-aminoterephthalic acid as the organic ligand. Diniconazole (Dini), as a model fungicide, was loaded into NH2-Fe-MIL-101 to afford Dini@NH2-Fe-MIL-101 with a satisfactory loading content of 28.1%. The subsequent polydopamine (PDA) modification could endow Dini with pH-sensitive release patterns. The release of Dini from PDA@Dini@NH2-Fe-MIL-101 was much faster in an acidic medium compared to that in neutral and basic media. Moreover, Dini@NH2-Fe-MIL-101 and PDA@Dini@NH2-Fe-MIL-101 displayed good bioactivities against the pathogenic fungus causing wheat head scab (Fusarium graminearum). This research sought to reveal the feasibility of versatile MOFs as a pesticide-delivery platform in sustainable crop protection.