An overview of peroxidation reactions using liposomes as model systems and analytical methods as monitoring tools

Metabolic Response of the Lycium barbarum Variety 'Ningqi No. 7' to Drought Stress

Lycium barbarum has been widely planted in arid and semi-arid areas due to its drought-resistant ability, which is of great economic value as a medicinal and edible homology plant. In this study, the metabolome of the L. barbarum variety "Ningqi 7" under different drought stress conditions was compared and analyzed by the non-targeted UPLC-MS (ultra-high performance liquid chromatography with mass spectrometry) technique. The results showed that drought stress significantly decreased the water content of leaves, increased the activity of antioxidant enzymes in plants, and up-regulated the metabolites and pathways involved in osmoregulation, antioxidant stress, energy metabolism, and signal transduction. Under moderate drought (40-45% FC), L. barbarum accumulated osmoregulatory substances mainly through the up-regulation of the arginine metabolism pathway. At the same time, phenylalanine metabolism and cutin, suberine, and wax biosynthesis were enhanced to improve the antioxidant capacity and reduce water loss. However, in severe drought (10-15% FC), L. barbarum shifted to up-regulate purine metabolism and lysine degradation and redistributed energy and nitrogen resources. In addition, vitamin B6 metabolism was significantly upregulated in both groups of stress levels, playing a key role in antioxidant and growth regulation. These observations delineate the metabolic adaptations of L. barbarum "Ningqi 7" in response to drought stress.

The Chemical Reactivity of Membrane Lipids

It is well-known that aqueous dispersions of phospholipids spontaneously assemble into bilayer structures. These structures have numerous applications across chemistry and materials science and form the fundamental structural unit of the biological membrane. The particular environment of the lipid bilayer, with a water-poor low dielectric core surrounded by a more polar and better hydrated interfacial region, gives the membrane particular biophysical and physicochemical properties and presents a unique environment for chemical reactions to occur. Many different types of molecule spanning a range of sizes, from dissolved gases through small organics to proteins, are able to interact with membranes and promote chemical changes to lipids that subsequently affect the physicochemical properties of the bilayer. This Review describes the chemical reactivity exhibited by lipids in their membrane form, with an emphasis on conditions where the lipids are well hydrated in the form of bilayers. Key topics include the following: lytic reactions of glyceryl esters, including hydrolysis, aminolysis, and transesterification; oxidation reactions of alkenes in unsaturated fatty acids and sterols, including autoxidation and oxidation by singlet oxygen; reactivity of headgroups, particularly with reactive carbonyl species; and E/Z isomerization of alkenes. The consequences of reactivity for biological activity and biophysical properties are also discussed.

Raman spectroscopy combined with multiple one-dimensional deep learning models for simultaneous quantification of multiple components in blended olive oil

Blended vegetable oils are highly prized by consumers for their comprehensive nutritional profile. Therefore, there is an urgent need for a rapid and accurate method to identify the true content of blended oils. This study combined Raman spectroscopy with three deep learning models (CNN-LSTM, improved AlexNet, and ResNet) to simultaneously quantify extra virgin olive oil (EVOO), soybean oil, and sunflower oil in olive blended oil. The results demonstrate that all three deep learning models exhibited superior predictive ability compared to traditional chemometric methods. Specifically, the CNN-LSTM model achieved a coefficient of determination (R2p) of over 0.995 for each oil in the quantitative analysis of three-component blended oils, with a mean square error of prediction (RMSEP) of less than 2%. This study presents a novel approach for the simultaneous quantitative analysis of multi-component blended oils, providing a rapid and accurate method for the identification of falsely labeled blended oils.

Lipid-Based Nanotechnology: Liposome

Over the past several decades, liposomes have been extensively developed and used for various clinical applications such as in pharmaceutical, cosmetic, and dietetic fields, due to its versatility, biocompatibility, and biodegradability, as well as the ability to enhance the therapeutic index of free drugs. However, some challenges remain unsolved, including liposome premature leakage, manufacturing irreproducibility, and limited translation success. This article reviews various aspects of liposomes, including its advantages, major compositions, and common preparation techniques, and discusses present U.S. FDA-approved, clinical, and preclinical liposomal nanotherapeutics for treating and preventing a variety of human diseases. In addition, we summarize the significance of and challenges in liposome-enabled nanotherapeutic development and hope it provides the fundamental knowledge and concepts about liposomes and their applications and contributions in contemporary pharmaceutical advancement.

In Vitro and In Vivo Synergistic Antitumor Activity of Albumin-Coated Oleic Acid-Loaded Liposomes toward Hepatocellular Carcinoma

Hepatocellular carcinoma (HCC) is one of the most lethal and prevalent cancers, closely associated with cirrhosis and fibrosis. This study aimed to assess the antitumor activity of oleic acid-liposomes (uncoated liposomes) upon coating with albumin against HCC. The in vitro studies revealed the high safety of the prepared uncoated and albumin-coated liposomes to normal HFB-4 cells (EC100 of 35.57 ± 0.17 and 79.133 ± 2.92 µM, respectively) with significant anticancer activity against HepG-2 cells with IC50 of 56.29 ± 0.91 and 26.74 ± 0.64 µM, respectively. The albumin-coated liposomes revealed superior apoptosis induction potential (80.7%) with significant upregulation of p53 gene expression (> 7.0-fold), compared to OA. The in vivo study revealed that the administration of uncoated or albumin-coated liposomes (100 mg/kg) for six weeks markedly retarded the DENA-induced HCC in Wistar albino rates through regulating the liver enzymes, total bilirubin level, pro-inflammatory cytokines, and oxidative stress. Accordingly, the current study supports the in vitro and in vivo chemo-preventive feature of albumin-coated liposomes against HCC through modulation of apoptosis, improvement of the immune response, reduction of inflammation, and restoration of impaired oxidative stress, which is the first reported to the best of our knowledge.

Inulin-Modified Liposomes as a Novel Delivery System for Cinnamaldehyde

Cinnamaldehyde as an antioxidant was encapsulated in inulin-modified nanoliposomes in order to improve its physical and antioxidant stability. The microstructure, particle size and volume distribution of cinnamaldehyde liposomes were characterized by atomic force microscopy (AFM) and dynamic light scattering (DLS). The particle size and polydispersion index (PDI) values of the inulin modified liposomes were 72.52 ± 0.71 nm and 0.223 ± 0.031, respectively. The results showed that the liposomes after surface modification with inulin remained spherical. Raman and Fourier transform infrared (FTIR) spectra analysis showed that hydrogen bonds were formed between the inulin and the liposome membrane. Inulin binding also restricted the freedom of movement of lipid molecules and enhanced the order of the hydrophobic core of the membrane and the polar headgroup region in lipid molecules. Therefore, the addition of different concentrations of inulin influenced the permeability of the liposome bilayer membrane. However, when inulin was excessive, the capacity of the bilayer membrane to load the cinnamaldehyde was reduced, and the stability of the system was reduced. Additionally, the encapsulation efficiency (EE) and retention rate (RR) of cinnamaldehyde from inulin-modified liposomes during storage were determined. The EE value of the inulin modified liposomes was 70.71 ± 0.53%. The liposomes with 1.5% inulin concentration had the highest retention rate (RR) and the smallest particle size during storage at 4 °C. The addition of inulin also enhanced the thermal stability of the liposomes. Based on the results, the surface modification improved the oxidation stability of liposomes, especially the DPPH scavenging ability. In conclusion, these results might help to develop inulin as a potential candidate for the effective modification of the surface of liposomes and provide data and conclusions for it.

Assessing Photosensitized Membrane Damage: Available Tools and Comprehensive Mechanisms

Lipids are important targets of the photosensitized oxidation reactions, forming important signaling molecules, disorganizing and permeabilizing membranes, and consequently inducing a variety of biological responses. Although the initial steps of the photosensitized oxidative damage in lipids are known to occur by both Type I and Type II mechanisms, the progression of the peroxidation reaction, which leads to important end-point biological responses, is poorly known. There are many experimental tools used to study the products of lipid oxidation, but neither the methods nor their resulting observations were critically compared. In this article, we will review the tools most frequently used and the key concepts raised by them in order to rationalize a comprehensive model for the initiation and the progression steps of the photoinduced lipid oxidation.

Molecular characterization and environmental impacts of water-soluble organic compounds of bio-oil from the thermochemical treatment of domestic sewage sludge

Water-soluble organic compounds derived from bio-oil (WOCB) are regarded as potential risk sources of sludge thermochemical treatment. This study showed that 10.35 mg of water-soluble organic carbon and 1.32 mg of water-soluble organic nitrogen were released per gram of sludge when the final temperature of thermochemical treatment was 600 °C. WOCB was mainly formed at 300-500 °C. Furthermore, FT-ICR MS results indicated that high temperatures promoted deamination reactions, and low molecular weight (LMW) compounds with low oxygen number polymerized into aromatic compounds with increasing temperature. Noteworthily, WOCB released at 20-600 °C showed strong phytotoxicity to wheat. LMW compounds with lignin/carboxylic rich alicyclic molecules (CRAM)-like structures derived from low temperatures (200-400 °C) induced this inhibitory effect, but lipids containing nitrogen and sulfur from high temperatures (400-600 °C) can act as nutrients to promote wheat growth. This study provides theoretical support for the risk control and benefits assessments of sludge thermochemical treatment.

Study of Resveratrol's Interaction with Planar Lipid Models: Insights into Its Location in Lipid Bilayers

Resveratrol, a polyphenolic molecule found in edible fruits and vegetables, shows a wide range of beneficial effects on human health, including anti-microbial, anti-inflammatory, anti-cancer, and anti-aging properties. Due to its poor water solubility and high liposome-water partition coefficient, the biomembrane seems to be the main target of resveratrol, although the mode of interaction with membrane lipids and its location within the cell membrane are still unclear. In this study, using electrophysiological measurements, we study the interaction of resveratrol with planar lipid membranes (PLMs) of different composition. We found that resveratrol incorporates into palmitoyl-oleoyl-phosphatidylcholine (POPC) and POPC:Ch PLMs and forms conductive units unlike those found in dioleoyl-phosphatidylserine (DOPS):dioleoyl-phosphatidylethanolamine (DOPE) PLMs. The variation of the biophysical parameters of PLMs in the presence of resveratrol provides information on its location within a lipid double layer, thus contributing to an understanding of its mechanism of action.

Study on detoxification and removal mechanisms of hexavalent chromium by microorganisms

Extensive industrial activities have led to an increase of the content of chromium in the environment, which causes serious pollution to the surrounding water, soil and atmosphere. The enrichment of chromium in the environment through the food chain ultimately affects human health. Therefore, the remediation of chromium pollution is crucial to development of human society. A lot of scholars have paid attention to bioremediation technology owing to its environmentally friendly and low-cost. Previous reviews mostly involved pure culture of microorganisms and rarely discussed the optimization of bioreduction conditions. To make up for these shortcomings, we not only introduced in detail the conditions that affect microbial reduction but also innovatively introduced consortium which may be the cornerstone for future treatment of complex field environments. The aim of this study is to summary chromium toxicity, factors affecting microbial remediation, and methods for enhancing bioremediation. However, the actual application of bioremediation technology is still facing a major challenge. This study also put forward the current research problems and proposed future research directions, providing theoretical guidance and scientific basis for the application of bioremediation technology.

A combined approach of electronic spectroscopy and quantum chemical calculations to assess model membrane oxidation pathways

Assessment of lipid oxidation pathways using UV spectroscopy and quantum chemical calculations.

Cytotoxic effects of dental prosthesis grinding dust on RAW264.7 cells

Respiratory diseases, including pulmonary fibrosis, silicosis, and allergic pneumonia, can be caused by long-term exposure to dental prosthesis grinding dust. The extent of the toxicity and pathogenicity of exposure to PMMA dust, Vitallium dust, and dentin porcelain dust differs. The dust from grinding dental prosthesis made of these three materials was characterized in terms of morphology, particle size, and elemental composition. The adverse effects of different concentrations of grinding dust (50, 150, 300, 450, and 600 μg ml-l) on RAW264.7 macrophages were evaluated, including changes in cell morphology and the production of lactate dehydrogenase (LDH) and reactive oxygen species (ROS). The dust particles released by grinding dental prosthesis made of these materials had different morphologies, particle sizes, and elemental compositions. They also induced varying degrees of cytotoxicity in RAW264.7 macrophages. A possible cytotoxicity mechanism is the induction of lipid peroxidation and plasma membrane damage as the dust particles penetrate cells. Therefore, clinicians who regularly work with these materials should wear the appropriate personal protection equipment to minimize exposure and reduce the health risks caused by these particulates.