Food colloids binary and ternary nanocomplexes: Innovations and discoveries

Construction of quaternary ammonium chitosan-coated protein nanoparticles as novel delivery system for curcumin: Characterization, stability, antioxidant activity and bio-accessibility

This research aimed to develop a novel, effective, and stable delivery system based on zein (ZE), sodium caseinate (SC), and quaternary ammonium chitosan (HACC) for curcumin (CUR). The pH-driven self-assembly combined with electrostatic deposition methods were employed to construct CUR-loaded ZE-SC nanoparticles with HACC coating (ZE-SC@HACC). The optimized nanocomposite was prepared at ZE:SC:HACC:CUR mass ratios of 1:1:2:0.1, and it had encapsulation efficiency of 89.3%, average diameter of 218.2 nm, and ζ-potential of 40.7 mV. The assembly of composites and encapsulation of CUR were facilitated primarily by hydrophobic, hydrogen-bonding, and electrostatic interactions. Physicochemical stability analysis revealed that HACC coating dramatically enhanced ZE-SC nanoparticles' colloidal stability and CUR's resistance to chemical degradation. Additionally, antioxidant activity and simulated digestion results indicated that CUR-ZE-SC@HACC nanoparticles showed higher free radical scavenging capacity and bio-accessibility of CUR than CUR-ZE-SC nanoparticles and free CUR. Therefore, the ZE-SC@HACC nanocomposite is an effective and viable delivery system for CUR.

Preparation and characterization of bovine serum albumin/chitosan composite nanoparticles for delivery of Antarctic krill peptide

BACKGROUND

Antarctic krill peptide (AKP) has gained considerable interest because of its multiple biological functions. However, its application may be limited by its poor stability and susceptibility to degradation. Encapsulation of AKP using a nanoparticle delivery system is an effective way to overcome these problems. In the present study, bovine serum albumin (BSA) and chitosan (CS) were used as delivery vehicles to encapsulate AKP.

RESULTS

The results revealed that the particle size (83.3 ± 4.4-222.4 ± 32.7 nm) and zeta-potential (35.1 ± 0.7-45.0 ± 2.7 mV) of nanoparticles (NPs) increased with the increasing content of BSA, but the polydispersity index decreased (1.000 ± 0.002 to 0.306 ± 0.011). Hydrogen bonding, hydrophobic and electrostatic interactions were the main forces to form BSA/CS-AKP NPs. X-ray diffraction revealed that AKP was encapsulated by BSA/CS. Scanning electron microscopy images exhibited that the NPs were spherical in shape, uniform in size and tightly bound. BSA/CS-AKP NPs exhibited excellent stability in the pH range (2-5) and after 15 days of storage, and could hinder the release of AKP in simulated gastric environment and promote the release of AKP in simulated intestinal environment. After simulated digestion, the hypoglycemic activity of encapsulated AKP was better than that of unencapsulated AKP.

CONCLUSION

Our results revealed that the BSA/CS showed great potential for protecting and delivering AKP. © 2024 Society of Chemical Industry.

Traditional Chinese medicine polysaccharide in nano-drug delivery systems: Current progress and future perspectives

Traditional Chinese medicine polysaccharides (TCMPs) have gained increasing attention in the field of nanomedicine due to their diverse biological activities and favorable characteristics as drug carriers, including biocompatibility, biodegradability, safety, and ease of modification. TCMPs-based nano-drug delivery systems (NDDSs) offer several advantages, such as evasion of reticuloendothelial system (RES) phagocytosis, protection against biomolecule degradation, enhanced drug bioavailability, and potent therapeutic effects. Therefore, a comprehensive review of the latest developments in TCMPs-based NDDSs and their applications in disease therapy is of great significance. This review provides an overview of the structural characteristics and biological activities of TCMPs relevant to carrier design, the strategies employed for constructing TCMPs-based NDDSs, and the versatile role of TCMPs in these systems. Additionally, current challenges and future prospects of TCMPs in NDDSs are discussed, aiming to provide valuable insights for future research and clinical translation.

Complex bio-nanoparticles assembled by a pH-driven method: environmental stress stability and oil-water interfacial behavior

BACKGROUND

Protein-based nanoparticles have gained considerable interest in recent years due to their biodegradability, biocompatibility, and functional properties. However, nanoparticles formed from hydrophobic proteins are prone to instability under environmental stress, which restricts their potential applications. It is therefore of great importance to develop green approaches for the fabrication of hydrophobic protein-based nanoparticles and to improve their physicochemical performance.

RESULTS

Gliadin/shellac complex nanoparticles (168.87 ~ 403.67 nm) with various gliadin/shellac mass ratios (10:0 ~ 5:5) were prepared using a pH-driven approach. In comparison with gliadin nanoparticles, complex nanoparticles have shown enhanced stability against neutral pH, ions, and boiling. They remained stable under neutral conditions at NaCl concentrations ranging from 0 to 100 mmol L-1 and even when boiled at 100 °C for 90 min. These nanoparticles were capable of effectively reducing oil-water interfacial tension (5 ~ 11 mNm-1 ) but a higher amount of shellac in the nanoparticles compromised their ability to lower interfacial tension. Moreover, the wettability of the nanoparticles changed as the gliadin/shellac mass ratio changed, leading to a range of three-phase contact angles from 52.41° to 84.85°. Notably, complex nanoparticles with a gliadin/shellac mass ratio of 8:2 (G/S 8:2) showed a contact angle of 84.85°, which is considered suitable for the Pickering stabilization mechanism. Moreover, these nanoparticles exhibited the highest emulsifying activity of 52.42 m2 g-1 and emulsifying stability of 65.33%.

CONCLUSIONS

The findings of the study revealed that gliadin/shellac complex nanoparticles exhibited excellent resistance to environmental stress and demonstrated superior oil-water interfacial behavior. They have strong potential for further development as food emulsifiers or as nano-delivery systems for nutraceuticals. © 2023 Society of Chemical Industry.

Preparation of polysaccharide-based nanoparticles by chitosan and flaxseed gum polyelectrolyte complexation as carriers for bighead carp (Aristichthys nobilis) peptide delivery

Polysaccharide-based nanoparticles formed by the polyelectrolyte complexation between chitosan (CS) and flaxseed gum (FG) was developed in this work, and it was further used as a carrier for bighead carp peptide (BCP) delivery. The CS molecular weight (MW) of 50 kDa and CS/FG mass ratio of 1:2 at pH 3.5 were optimal conditions for the NP preparation, with the minimum particle size (∼155.1 nm) and the maximum BCP encapsulation efficiency (60.3 %). The BCP-loaded CS/FG NPs exhibited the smallest particle size (175.8 nm). Both CS/FG NPs and CS/FG-BCP NPs exhibited roughly uniform spherical shape. FT-IR spectra confirmed the existence of hydrogen bonds and electrostatic interactions in the nanoparticles. The BCP-loaded NPs displayed a higher thermal stability than BCP. Moreover, the release of BCP was controllable and dose-dependent, following a first-order kinetics model. These findings suggested that our CS/FG NPs are a promising carrier for bioactive peptide delivery.

Recent advances in cellulose, pectin, carrageenan and alginate-based oral drug delivery systems

Polymers-based drug delivery systems constitute one of the highly explored thrust areas in the field of the medicinal and pharmaceutical industries. In the past years, the properties of polymers have been modified in context to their solubility, release kinetics, targeted action site, absorption, and therapeutic efficacy. Despite the availability of diverse synthetic polymers for the bioavailability enhancement of drugs, the use of natural polymers is still highly recommended due to their easy availability, accessibility, and non-toxicity. The aim of the review is to provide the available literature of the last five years on oral drug delivery systems based on four natural polymers i.e., cellulose, pectin, carrageenan, and alginate in a concise and tabulated manner. In this review, most of the information is in tabulated form to provide easy accessibility to the reader. The data related to active pharmaceutical ingredients and supported components in different formulations of the mentioned polymers have been made available.

Development of ternary nanoformulation comprising bee pollen-thymol oil extracts and chitosan nanoparticles for anti-inflammatory and anticancer applications

Due to the beneficial nutritional and medicinal characteristics of bee honey and thymol oil as antioxidants, anti-inflammatory agents, and antibacterial agents, they have been used since ancient times. The current study aimed to construct a ternary nanoformulation (BPE-TOE-CSNPs NF) through the immobilization of the ethanolic extract of bee pollen (BPE) with thymol oil extract (TOE) into the matrix of chitosan nanoparticles (CSNPs). The antiproliferative activity of new NF (BPE-TOE-CSNPs) against HepG2 and MCF-7 cells was investigated. The BPE-TOE-CSNPs showed significant inhibitory activity for the production of the inflammatory cytokines in HepG2 and MCF-7, with p < 0.001 for both TNF-α and IL6. Moreover, the encapsulation of the BPE and TOE in CSNPs increased the efficacy of the treatment and the induction of valuable arrests for the S phase of the cell cycle. In addition, the new NF has a great capacity to trigger apoptotic mechanisms through caspase-3 expression upregulation in cancer cells by two-fold among HepG2 cell lines and nine-fold among MCF-7 which appeared to be more susceptible to the nanoformulation. Moreover, the nanoformulated compound has upregulated the expression of caspase-9 and P53 apoptotic mechanisms. This NF may shed light on its pharmacological actions by blocking specific proliferative proteins, inducing apoptosis, and interfering with the DNA replication process.

Bacterial outer membrane vesicles-cloaked modified zein nanoparticles for oral delivery of paclitaxel

To improve the aqueous solubility and oral bioavailability of paclitaxel (PTX), a biomimetic system for oral administration of PTX was efficiently developed as an outer membrane vesicle (OMVs) of sodium caseinate (CAS) modified zein nanoparticles (OMVs-Zein-CAS-PTX-NPs) by Escherichia coli. To verify their structure and properties, the designed nanostructures were thoroughly characterized using various characterization techniques. The results indicated that hydrogen bonds and van der Waals forces mainly drove the interaction between PTX and Zein, but the complex is unstable. The physicochemical stability of PTX-loaded zein nanoparticles was improved by the addition of CAS. The biological characteristics of biofilms are reproduced by nanoparticles cloaked with outer membrane vesicles. OMVs-Zein-CAS-PTX-NPs delayed the release of PTX under simulated gastric and intestinal fluids due to OMVs protection. OMVs-Zein-CAS-PTX-NPs exhibited remarkable antitumor ability in vitro and improved the bioavailability of oral administration of PTX in vivo. Therefore, OMVs cloaked in nanoparticles may be a suitable delivery vehicle to provide an efficient application prospect for the oral administration of PTX.

Chitosan nanoparticles efficiently enhance the dispersibility, stability and selective antibacterial activity of insoluble isoflavonoids

Natural isoflavonoids have attracted much attention in the treatment of oral bacterial infections and other diseases due to their excellent antibacterial activity and safety. However, their poor water solubility, instability and low bioavailability seriously limited the practical application. In this study, licoricidin-loaded chitosan nanoparticles (LC-CSNPs) were synthesized by self-assembly for improving the dispersion of licoricidin (LC) and strengthening antibacterial and anti-biofilm performance. Compared to free LC, the minimum inhibitory concentration of LC-CSNPs against Streptococcus mutans decreased >2-fold to 26 μg/mL, and LC-CSNPs could ablate 70 % biofilms at this concentration. The enhanced antibacterial activity was mainly attributed to the spontaneous surface adsorption of LC-CSNPs on cell membranes through electrostatic interactions. More valuably, LC-CSNPs had no inhibitory effect on the growth of probiotic. Mechanism study indicated that LC-CSNPs altered the transmembrane potential to cause bacterial cells in a hyperpolarized state, generating ROS to cause cells damage and eventually apoptosis. This work demonstrated that the chitosan-based nanoparticles have great potential in enhancing the dispersibility and antibacterial activity of insoluble isoflavonoids, offering a promising therapeutic strategy for oral infections.

Fabrication and characterization of the H/J-type aggregates astaxanthin/bovine serum albumin/chitosan nanoparticles

Astaxanthin is a natural liposoluble ketocarotenoid with various biological activities. Hydrophobic astaxanthin with C_2h symmetry can self-assembly form H-type aggregates and J-type aggregates in hydrated polar solvents. However, astaxanthin and its aggregates are limited by its water insolubility and chemical instability. Here, the biological macromolecules bovine serum albumin (BSA) and chitosan were chosen as protein-polysaccharides based delivery systems for astaxanthin aggregates by molecular self-assembly method. The precise prepared H-ABC-NPs and J-ABC-NPs suspensions were both near spheres with hydrodynamic size around 281 ± 9 nm and 368 ± 5 nm and zeta potentials around +26 mV and +30 mV, respectively. Two types of astaxanthin aggregates were distinguished, water-dispersible, and stable in nanocarriers through UV-vis spectra observation. The encapsulation efficiency of the astaxanthin in ABC-NPs was above 90 %. Fourier transform infrared spectroscopy (FTIR) and circular dichroism (CD) analyses indicated that the dominant driving forces of ABC-NPs formation mainly included electrostatic, hydrophobic interactions and hydrogen bonding. These results offer an elegant opportunity for the protein-polysaccharides delivery systems, and provide an important perspective for applying novel water-dispersed astaxanthin aggregates products in nutrition and medicine industry.

Development and analysis of machine-learning guided flash nanoprecipitation (FNP) for continuous chitosan nanoparticles production

Chitosan-based nanoparticles (CNPs) are widely used in drug delivery, cosmetics formulation and food applications. To accelerate the manufacturing of CNPs, the present study develops a workflow to prepare CNPs in continues model. Based on machine learning, the workflow precisely predicts size and polymer dispersity index (PDI) value of CNPs, which impacts on the colloidal stability and applications. Multi-inlet vortex mixer (MIVM) device was fabricated by 3D printing as the reactor. Peristaltic pump was applied to deliver the reaction streams into the MIVM device and produce CNPs by flash nanoprecipitation (FNP) in continuous way. The developed MIVM device produces CNPs in controlled manner at higher output which is promising for upscale applications. Twelve machine learning algorithms were employed to investigate the potential relationship between the reaction independent variables and hydrodynamic characteristics of CNPs. Random Forest, Decision Tree, Extra Tree and Bagging algorithms performed better than other algorithms with the average prediction accuracy around 90 %. The current study demonstrated that supervised machine learning guided FNP using the developed MIVM device is an effective strategy for accurate and intelligent production of CNPs and other similar nanoparticles.

Pulmonary drug delivery applications of natural polysaccharide polymer derived nano/micro-carrier systems: A review

Respiratory distress syndrome and pneumothorax are the foremost causes of death as a result of the changing lifestyle and increasing air pollution. Numerous approaches have been studied for the pulmonary delivery of drugs, proteins as well as peptides using meso/nanoparticles, nanocrystals, and liposomes. These nano/microcarrier systems (NMCs) loaded with drug provide better systemic as well as local action. Furthermore, natural polysaccharide-based polymers such as chitosan (CS), alginate (AG), hyaluronic acid, dextran, and cellulose are highly used for the preparation of nanoparticles and delivery of the drug into the pulmonary tract due to their advantageous properties such as low toxicity, high hydrophobicity, supplementary mucociliary clearance, mucoadhesivity, and biological efficacy. These properties ease the delivery of drugs onto the targeted site. Herein, recent advances in the natural polymer-derived NMCs have been reviewed for their transport and mechanism of action into the bronchiolar region as well as the respiratory region. Various physicochemical properties such as surface charge, size of nanocarrier system, surface modifications, and toxicological effects of these nanocarriers in vitro and in vivo are elucidated as well. Furthermore, challenges faced for the preparation of a model NMCs for pulmonary drug delivery are also discoursed.

In vitro cytocompatibility assessment and antibacterial effects of quercetin encapsulated alginate/chitosan nanoparticle

The present work aims at evaluating the in vitro biocompatibility, antibacterial activity and antioxidant capacity of the fabricated and optimized Alginate/Chitosan nanoparticles (ALG/CSNPs) and quercetin loaded Alginate/Chitosan nanoparticles (Q-ALG/CSNPs) with an improved biological efficacy on the hydrophobic flavonoid.The physicochemical properties were determined by TEM and FTIR analysis. The nanoparticles evaluated for the encapsulation of quercetin exerted % encapsulation efficiency (EE) that varied between 76 and 82.4 % and loading capacity (LC) from 31 to 46.5 %. Potential cytotoxicity of the ALG/CSNPs and Q-ALG/CSNPs upon L929 fibroblast cell line was evaluated by MTT reduction Assay and expressed as % cell viability. The in vitro antibacterial property was studied by well diffusion method against gram-positive bacteria Staphylococcus aureus (ATCC 25925) and gram-negative bacteria Escherichia coli (ATCC 25923). The inhibitory efficacy by scavenging free radical intermediates was evaluated by 1,1, diphenyl 2-picrylhydrazyl (DPPH) assay. The results of in vitro cytotoxicity showed biocompatibility towards L929 cells. Quercetin loaded Alginate/Chitosan nanoparticles inhibited the growth of microorganisms than pure quercetin. The 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging results have shown a high level of antioxidant property for encapsulated Quercetin in Alginate/Chitosan nanoparticles compared to free Quercetin. The findings of our study suggest that the developed ALG/CSNPs and Q-ALG/CSNPs possess the prerequisites and be proposed as a suitable system for delivering quercetin with enhanced therapeutic effectuality.

Recent insights into polysaccharide-based hydrogels and their potential applications in food sector: A review

Hydrogels are ideal for various food applications because of their softness, elasticity, absorbent nature, flexibility, and hygroscopic nature. Polysaccharide hydrogels are particularly suitable because of the hydrophilic nature, their food compatibility, and their non-immunogenic character. Such hydrogels offer a wide range of successful applications such as food preservation, pharmaceuticals, agriculture, and food packaging. Additionally, polysaccharide hydrogels have proven to play a significant role in the formulation of food flavor carrier systems, thus diversifying the horizons of newer developments in food processing sector. Polysaccharide hydrogels are comprised of natural polymers such as alginate, chitosan, starch, pectin and hyaluronic acid when crosslinked physically or chemically. Hydrogels with interchangeable, antimicrobial and barrier properties are referred to as smart hydrogels. This review brings together the recent and relevant polysaccharide research in these polysaccharide hydrogel applications areas and seeks to point the way forward for future research and interventions. Applications in carrying out the process of flavor carrier system directly through their incorporation in food matrices, broadening the domain for food application innovations. The classification and important features of polysaccharide-based hydrogels in food processing are the topics of the current review study.

pH-driven self-assembly of alcohol-free curcumin-loaded zein-propylene glycol alginate complex nanoparticles

This study aimed to prepare alcohol-free curcumin-loaded zein-propylene glycol alginate (zein-PGA-Cur) nanoparticles using the pH-driven method to enhance the bioavailability and physicochemical stability of curcumin. The prepared zein-PGA-Cur nanoparticles exhibited a small size (360 nm) and negative zeta-potential (-5.8 mV), as well as excellent physical stability, under storage conditions of pH 4.0 and temperature at 4 °C for 30 days. In addition, the Fourier transform infrared spectroscopy results demonstrated that the main interactions of pH-driven for the formation of zein-PGA-Cur nanoparticles were hydrogen bonding, hydrophobic, and electrostatic interactions. Fluorescence spectroscopy revealed that the curcumin-induced fluorescence quenching of zein was static. Circular Dichroism spectroscopy demonstrated that the pH-driven method mainly decreased the β-sheet structure of zein from 3.9 % to 1.4 %. Furthermore, the HT-29 colorectal adenocarcinoma cells viability experiments revealed that the prepared zein-PGA-Cur nanoparticles exhibited excellent biocompatibility. In vivo rat experiments also demonstrated that the prepared nanoparticles resulted in a higher plasma concentration of curcumin, representing a 7.2-fold enhancement in bioavailability compared with pure curcumin crystals. The findings of this study will provide a green and energy-saving method for the development of insoluble drug self-assembly systems and promote their wider applications in drug delivery.

Sodium alginate/gum arabic/glycerol multicomponent edible films loaded with natamycin: Study on physicochemical, antibacterial, and sweet potatoes preservation properties

Sweet potato (Ipomonea batatas Lam) is easily damaged due to its thin skin, which is limited in shelf life and causes enormous economic losses in the food industry. A new type of safe, non-toxic, and edible antibacterial functional film was developed with sodium alginate (2.5 %), gum arabic (1 %), glycerol (2 %), and natamycin as an antimicrobial agent in this study. The physical and antibacterial properties of films, such as thickness, chromaticity, water vapor permeability, tensile strength, and elongation at break, were studied. Furthermore, the antibacterial film was applied in the preservation of sweet potatoes. The results showed that natamycin emulsion had good compatibility with sodium alginate. Besides reducing the transparency of the composite membrane, the mechanical properties, barrier properties, and thermal stability of the composite film were significantly enhanced by the addition of natamycin prepared by a pH-cycle method. When the concentration of natamycin in the membrane solution reached 40 μg/mL or more, the antibacterial film had a noticeable inhibitory effect on the growth of molds, and yeasts, significantly enhancing the bacteriostatic effect of the base film. During the sweet potatoes storage, the water content, total starch content, Vc content, and flavonoid glycoside content of sweet potato showed a downward trend. However, the treatment of antibacterial film containing natamycin could slow down the physiological and quality changes of sweet potatoes during conventional storage, and the sweet potatoes still had good processing quality after 120 days of storage.

Antimicrobial effects of thymol-loaded phytoglycogen/zein nanocomplexes against foodborne pathogens on fresh produce

In this study, thymol-loaded hydrophobically modified phytoglycogen/zein nanocomplexes with a particle size around 100 nm were developed for improving microbial safety of fresh produce. The antimicrobial activities, including the determination of minimum inhibitory and bactericidal concentration, growth kinetic curves, and inhibition zone of the nanocomplexes against foodborne pathogens (Listeria monocytogenes, Salmonella enteritidis, and Escherichia coli) were evaluated. The results showed that the antimicrobial activities of the nanocomplexes were significantly stronger than that of free thymol control (without encapsulation), and the antimicrobial efficacy remained unchanged after storage at 4 °C for 60 days. The morphological results from atomic force microscope revealed that small micellar blebs were formed at the surface of bacteria after treatment with nanocomplexes and the gradual disappearance of the cell boundary indicated the occurrence of cytolysis. The potential applications of this nanocomplex as disinfectant agent in wash water were evaluated on different types of fresh produce (lettuce, cantaloupe, and strawberries). Notably, the nanocomplexes also demonstrated efficacy in biofilm removal. Findings from this study clearly demonstrated that the thymol-loaded nanocomplexes hold promising potential for the disinfection of fresh produce to improve their microbial safety and quality.

Biogenetic nanocarriers with enhanced pH stability formed by zein and selectively depolymerized mushroom hyperbranched β-glucans

Hyperbranched polysaccharide from Pleurotus tuber-regium (PTR-HBPS) is a β-glucan with high degree of branching (DB, 0.69) and a molecular weight (Mw) of 31.2 × 10⁵ g/mol with mixed β-1, 4/β-1, 4, 6/β-1, 6 glucosidic linkages. PTR-HBPS was depolymerized by cellulase and β-glucosidase under optimized conditions to form PC (PTR-HBPS depolymerized by cellulase) and PG (PTR-HBPS depolymerized by β-glucosidase) fractions with a minimum Mw of 2.74 × 10⁵ and 3.98 × 10⁵ g/mol, respectively. PC fractions had no significant changes for its primary structure in terms of glycosidic linkages, DB, and triple helical structure, while the DB of PG fractions was reduced to 0.63 with the loss of triple helical structure. Nanoparticles fabricated by PC fractions with zein showed better stability under different pH conditions. Enzymatic depolymerized low Mw β-glucan derived from PTR-HBPS with similar structural characteristics as the native one has potential as nanocarriers for food bioactive substances.

Chitosan/zein films incorporated with essential oil nanoparticles and nanoemulsions: Similarities and differences

The purpose of this study was to prepare chitosan/zein (CS/Zein) edible films reinforced with Mosla chinensis essential oils (EOs) nanoemulsions (NEs) and nanoparticles (NPs) in order to compare their properties. NEs and NPs containing EOs could be used to fabricate films with functional properties, and the films were prepared using a casting method. The influence of EO concentration and mixing methods on the physical, mechanical, and functional properties of the films was investigated. The results indicated that the films formulated with EO NEs generated favorable fundamental and functional characteristics with excellent mechanical properties, moisture barrier capacity, and significant antioxidant and antibacterial activity. In addition, the use of NEs-based films improved the release of bioactive compounds, and the mechanism of EO release was found to follow a first order model. In summary, EO NEs were more effective in preserving the fundamental and functional properties of CS/Zein nanocomposite edible films than NP-based films. These differences may reflect different forms and methods of dispersing EOs in NEs and NPs. This study demonstrated that NEs reinforced films could be used to enhance the effectiveness of EOs in food products and develop new strategies for their delivery and application.

Emerging trends in nano-bioactive-mediated mitochondria-targeted therapeutic stratagems using polysaccharides, proteins and lipidic carriers

The emergence of new lifestyle disorders and pharmaco-resistant variants of diseases has necessitated the search for effective therapeutic moieties and approaches that could overcome the limitations in the existing treatment modalities. In this context, bioactives such as flavonoids, polyphenols, tannins, terpenoids and alkaloids have demonstrated promise in therapy owing to their ability to scavenge free radicals and modulate the mitochondrial function as well as regulate metabolic pathways. However, their clinical applicability is low owing to their poor bioavailability and aqueous solubility. The encapsulation of bioactives in nanodimensional particles has overcome these limitations to a large extent while simultaneously conferring additional advantages of improved circulation time, enhanced cell uptake and target specific release. A wide range of nanocarriers derived from biopolymers such as polysaccharides, lipids and proteins, have been explored for encapsulation of different bioactives and have reported significant improvement of the bioavailability and therapeutic efficacy of the encapsulated cargo. However, incorporation of cell-specific and mitochondria-specific elements on the nanocarriers has been relatively less explored. This review summarizes some of the recent attempts to treat different disorders using bioactives encapsulated in biopolymer nanostructures and few instances of mitochondria-specific delivery.

Nanoencapsulation of buriti oil (Mauritia flexuosa L.f.) in porcine gelatin enhances the antioxidant potential and improves the effect on the antibiotic activity modulation

The present study evaluated the cytotoxicity, antioxidant potential, and antimicrobial effect on the antibiotic activity modulation of gelatin nanoparticles containing buriti oil (OPG). The cytotoxicity analysis was performed on Chinese Hamster Ovary Cells (CHO) using a MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] test. The antioxidant potential of buriti oil and OPG was determined by total antioxidant capacity, reducing power, and the ABTS (2,2'-azinobis-3-ethylbenzothiazoline-6-sulfonic acid) test. The modulating antimicrobial activity was evaluated by determining the minimum inhibitory concentration (MIC) concentration against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, gentamicin and norflaxacillin. The nanoformulation of OPG did not show a cytotoxic effect on CHO cells and had a higher antioxidant potential than free buriti oil (p<0.05). The combination of antibiotics with free buriti oil and OPG was more efficient in inhibiting E. coli and P. aeruginosa than isolated norfloxacillin and gentamicin (p<0.05). Regarding the inhibition of S. aureus, OPG in combination with norfloxacillin reduced MIC by 50%. Nanoencapsulation was a viable alternative to enhance functionality and adding commercial value to buriti oil.

A review of factors affecting the stability of zein-based nanoparticles loaded with bioactive compounds: from construction to application

Zein-based nanoparticles loaded with bioactive compounds have positive prospects in the food industry, but an important limiting factor for development is colloidal instability. Currently, extensive researches are focused on solving the instability of zein nanoparticles, but since the beginning of the studies, there has not been a summary of the factors affecting the stability of zein-based nanoparticles. In the present work, the factors were reviewed comprehensively from the perspective of carrier construction and application evaluation. The former mainly includes type, quantity, and characteristics of biopolymer, the mass ratio of biopolymer/bioactive compound to zein, blending sequence of biopolymer, and location of encapsulated bioactive compounds. The latter mainly includes pH, heating, ionic strength, storage, freeze-drying, and gastrointestinal digestion. The former is the prerequisite for the success of the latter. The challenge is that stability research is limited to the laboratory level, and it is difficult to ensure that the stability results are suitable for commercial food matrices due to their complexity. At the laboratory level, the future trends are the influence of external energy and the cross-complexity and uniformity of stability research. The review is expected to provide systematic understanding and guidance for the development of zein-based nanoparticles stability.

High internal phase Pickering emulsions stabilized by egg yolk low density lipoprotein for delivery of curcumin

Egg yolk low density lipoprotein (LDL) was used to prepare high internal phase Pickering emulsions (HIPEs) and its role as a stabilizer was comprehensively studied in this work. LDL exists as homogenous nanoparticles with an average size of 49 nm and amphiphilic nature, having a contact angle close to 90°. HIPEs were studied by varying compositions of 75%-90% oil phase and 25%-10% aqueous phase containing 0.5%-2% LDL. Rheological measurement, confocal laser scanning and optical microscopes imaging together with digital photos revealed the solid gel network, the strength of which was dependent upon oil volume fraction and LDL concentration. Optimal formulation of HIPEs was found as 80% oil and 2% LDL concentration, which exhibited small droplets under 10 µm with negligible aggregations, even after four weeks storage under refrigeration or heating at 90 ℃ for 30 min. After three freeze-thawing cycles, the HIPEs were demulsified losing their gel structure, but a simple re-homogenization was able to reconstitute the gel network identical to original microstructure. Encapsulation of curcumin into Pickering HIPEs provided exceptional photostability (around 80% retention rate) against ultraviolet radiation and improved its bioaccessibility from 10% to 50% during in vitro digestion. Our findings may bring new opportunities to design semi-solid foods using natural and edible ingredients.

Osmundea sp. macroalgal polysaccharide-based nanoparticles produced by flash nanocomplexation technique

The macroalgae-derived polysaccharides' biological potential has been explored due to their attractive intrinsic properties such as biocompatibility, biodegradability, and their ability to conjugate with other compounds. In particular, in the drug delivery systems field, the anionic macroalgae polysaccharides have been combined with cationic compounds through ionotropic gelation and/or bulk mixing. However, these techniques did not assure reproducibility, and the stability of nanoparticles is undesired. To overcome these limitations, herein, the polysaccharide extracted from Osmundea sp. was used to produce nanoparticles through the flash nanocomplexation technique. This approach rapidly mixed the negative charge of macroalgae polysaccharide with a positive chitosan charge on a millisecond timescale. Further, diclofenac (an anti-inflammatory drug) was also incorporated into complex nanoparticles. Overall, the gathered data showed that hydrodynamic diameter nanoparticles values lower than 100 nm, presenting a narrow size distribution and stability. Also, the diclofenac exhibited a targeted and sustained release profile in simulating inflammatory conditions. Likewise, the nanoparticles showed excellent biological properties, evidencing their suitability to be used to treat inflammatory skin diseases.

pH-driven self-assembly of alcohol-free curcumin-loaded propylene glycol alginate nanoparticles

The purpose of this paper was to explore the application of propylene glycol alginate (PGA) alone in alcohol-free curcumin-loaded nanoparticles (PGA/Cur) prepared by a pH-driven method to solve the curcumin shortcomings of low water solubility, stability and bioavailability. One of the bright spots of PGA/Cur was its extremely high loading capacity. PGA/Cur formed a spherical structure mainly by hydrophobic interaction and hydrogen bonding, making curcumin amorphous. PGA/Cur exhibited stability at pH 4.0-8.0 due to its high surface charges. PGA/Cur still showed a unimodal size distribution even under 3000 mM ionic strength. Heating caused uneven size distribution, but the smaller size still presented its thermostability. PGA/Cur exhibited good physical stability and slowed down the curcumin degradation with t_1/2 of 37.47 days during storage. PGA/Cur could maintain structural integrity in gastric acid and released curcumin in the intestine, thus improving the bioaccessibility of curcumin. Additionally, PGA/Cur displayed the solubilization after lyophilization.

Investigation of the structural and physical properties, antioxidant and antimicrobial activity of konjac glucomannan/cellulose nanocrystal bionanocomposite films incorporated with phlorotannin from Sargassum

In this study, environmentally friendly bionanocomposite films were prepared by incorporating phlorotannins from Sargassum (PS) into konjac glucomannan (KGM)/cotton cellulose nanocrystals (CNC) composites. The effects of different concentrations of PS (5%, 9%, 13%, and 17%, w/w) on the microstructure, physical properties, antioxidant and antibacterial activities of the resultant bionanocomposite films were evaluated. The results of scanning electron microscopy, X-ray diffraction, and Fourier-transform infrared spectra showed that PS was well compatible with the KGM/CNC composites matrix, which led to form a compact and uniform structure of the films. Thermogravimetric analysis and differential scanning calorimetry demonstrated that incorporating PS improved the heat stability of KGM/CNC bionanocomposite films. And addition of the appropriate amount of PS improved the mechanical and water-vapor barrier-related properties of the bionanocomposite film. For instance, with 9% PS, the tensile strength of the KGM/CNC/PS bionanocomposite film increased by 33.9%, and the water-vapor transmittance decreased by 41.67% compared to that of the KGM/CNC films. Moreover, the addition of PS endowed the KGM/CNC film with excellent antioxidant and antibacterial properties. Therefore, KGM/CNC/PS bionanocomposite films have great potential to be applicated as active packaging in the food packaging industry.

Chitosan nanoparticles encapsulating lemongrass (Cymbopogon commutatus) essential oil: Physicochemical, structural, antimicrobial and in-vitro release properties

This study was aimed to encapsulate lemongrass (Cymbopogon commutatus) essential oil (LGEO) into chitosan nanoparticles (CSNPs) and to investigate their physicochemical, morphological, structural, thermal, antimicrobial and in-vitro release properties. CSNPs exhibited spherical morphology with an average hydrodynamic size of 175-235 nm. Increasing EO loading increased the average size of CSNPs from 174 to 293 nm (at CS:EO ratio from 1:0 to 1:1.25). SEM and AFM confirmed the results obtained by hydrodynamic size indicating that EO loading led to formation of large aggregated NPs. The successful physical entrapment of EO within NPs was shown by fourier-transform infrared spectroscopy. X-ray diffractogram of loaded-CSNPs compared to non-loaded CSNPs exhibited a broad high intensity peak at 2θ = 19-25° implying the entrapment of LGEO within CSNPs. Thermogravimetric analysis (TGA) showed that encapsulated EO was decomposed at a temperature of 252 °C compared to a degradation temperature of 126 °C for pure LGEO, indicating a two-fold enhancement in thermal stability of encapsulated CSNPs. Differential scanning calorimetry also proved the physical entrapment of EO into polymeric matrix of chitosan. In-vitro release study showed a time- and pH-dependent release of EO into release media demonstrating a three-stage release behavior with a rapid initial release of EO, followed by a steady state migration of EO from its surrounding envelope at the later stages. Antimicrobial assay showed strong antimicrobial properties of free form of LGEO against the bacteria (both gram positive and gram negative) and fungi species tested. Moreover, loaded-CSNPs exhibited stronger antibacterial and anti-fungal activities than non-loaded CSNPs.

Fabrication, stability and rheological properties of zein/chitosan particles stabilized Pickering emulsions with antioxidant activities of the encapsulated vit-D3

Pickering emulsions have been known to be promising candidates for encapsulating and delivering a wide range of bioactive compounds with antioxidant potentials. In this work, we formulated and characterized zein (ZN)/chitosan (CS) stabilized Pickering emulsion. The prepared emulsions were firstly characterized by droplet size after preparation and after storage for one month at room temperature as well as after the addition of prebiotic gum Arabic (GA). Rheological measurements were further carried out to see the behavior and stability of these emulsions after storage. Thereafter, vit-D₃ was encapsulated, and the antioxidant activity of the emulsions system were evaluated. The results showed that no significant change in the mean droplet diameter of the emulsions was observed after storage for a month. This claim was further confirmed by their rheological measurements particularly, the emulsions prepared with ZN/CS ratio of 1:2 having 50% oil contents exhibited significant stability. GA addition caused a gradual increase in the droplet size up to some level, after which it led to complete destabilization of the emulsion. Finally, to protect and deliver, vit-D₃ was successfully loaded in these emulsions. No significant difference in the DPPH radical scavenging activity of the vit-D₃ encapsulated emulsions was observed, showing their capability as delivery vehicles irrespective of their composition.

Preparation, characterization and biological activity of proanthocyanidin-chitosan nanoparticles

In this study, proanthocyanidin-loaded chitosan nanoparticles (PC-CS-NPs) were produced using ionotropic gelation and characterized using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and dynamic light scattering (DLS). The synthesized nanoparticles were smaller than 300 nm and had a spherical shape, smooth topography and homogenous morphology as observed through scanning electron microscopy (SEM). In vitro release study showed that proanthocyanidins (PC) had a sustainable release from PC-CS-NPs in different buffer media. PC-CS-NPs had higher or comparable potency in scavenging DPPH and ABTS free radicals as compared to native drugs. Furthermore, PC-CS-NPs also inhibited the growth of four bacteria species, whose degree of inhibition depended on the bacterial strain. The results of SEM confirmed the changes in the microstructure of bacteria. Our findings support the use of chitosan nanoparticles to encapsulate PC and improve its bioactivity in food products.

Self-assembled caseinate-laponite® nanocomposites for curcumin delivery

In this study, novel self-assembled protein-clay nanocomposites were developed for curcumin delivery. Experimentally, curcumin was dissolved and deprotonated in sodium caseinate-laponite® (NaCas-LAP) dispersion at pH 12.0 for 30 min followed by neutralization to pH = 7. Due to the pH-mediated dissociation and re-association process, curcumin was successfully encapsulated into NaCas-LAP nanocomposites. The colloidal properties and encapsulation capabilities of NaCas-LAP nanocomposites were investigated, including particle size, zeta potential, encapsulation efficiency, release profile in simulated gastrointestinal tract, as well as nanoscale morphology. The results indicated that upon neutralization, NaCas-LAP nanocomposites were re-associated into smaller particles due to strong hydrophobic interactions among NaCas, LAP and curcumin. Specifically, 0.10% curcumin loaded nanocomposites prepared with 2% NaCas and 0.5% LAP showed improved encapsulation performance (73.4%) with smaller particle size (100 nm). The as-prepared protein-clay nanocomposites hold promising potential to deliver lipophilic bioactive compounds, such as curcumin.

Chemically modified phytoglycogen: Physicochemical characterizations and applications to encapsulate curcumin

Phytoglycogen (PG), a water-soluble glycogen-like α-d-glucan, exists as natural dendritic nanoparticles which are known as a promising solubility enhancer and delivery vehicle for lipophilic compounds. However, the practical applications of PG in food and pharmaceutical fields are limited by their high hydrophilicity and relatively low encapsulation efficiency compared with other delivery systems. The objectives of this work were to chemically modify native PG nanoparticles with hydrophobic groups and to characterize their physicochemical properties, as well as to evaluate the application feasibility of modified PG (mPG) nanoparticles as a carrier for hydrophobic bioactive compounds. The surface hydroxyl groups of PG nanoparticles were capped with various anhydrides, e.g., acetic, valeric, and N-caprylic, to obtain the PG nanoparticles with different hydrophobicity. Successful modification by acyl groups was evidenced by both Fourier-transform infrared and nuclear magnetic resonance spectroscopies. The mPG nanoparticles exhibited a more compact structure and homogeneous size distribution as revealed by dynamic light scattering measurement and visualized by transmission electron microscope, while their size slightly increased with the chain length of anhydride. Rheological measurement revealed that the viscosity of mPG at low shear rate was increased with the increase of degree of substitution due to the intermolecular hydrophobic association. A novel pH-driven method to load curcumin showed significantly higher encapsulation efficiency and greater antioxidant activity compared with traditional ethanol mediated loading method. Hydrophobic modification of natural dendritic PG nanostructures demonstrates promising potential to develop food-grade nanocarriers for lipophilic bioactive compounds with improved bioactivity.

Influence of sodium caseinate, maltodextrin, pectin and their Maillard conjugate on the stability, in vitro release, anti-oxidant property and cell viability of eugenol-olive oil nanoemulsions

The influence of protein (sodium caseinate-SC), polysaccharide (maltodextrin-MD; pectin-PC) and their Maillard conjugates (sodium caseinate maltodextrin conjugate-SCMDC; sodium caseinate pectin conjugate-SCPCC) were studied on the physico-chemical and biological properties of eugenol nanoemulsions/powder. The chemical composition was optimized using Taguchi design. The particles size of eugenol nanoemulsions with SC, MD, PC, SCMDC and SCPCC were 104.6, 323.5, 1872, 181.7, and 454.4 nm, respectively while their zeta potentials were -31.2, -28.5, -21.4, -40.1 and -25.1 mV, respectively. Turbidity studies revealed higher stability of nanoemulsion prepared with Maillard conjugate (SCMDC) compared to protein or polysaccharides alone. The dispersion of SCMDC eugenol nanoparticles in buffer was prepared to study its stability at different pH (3.0, 5.0, and 7.0) and temperature (4°, 37°, 60 °C) range. In-vitro enzymatic release study showed 31 and 74% release of eugenol after 6 h at pH 2.4 and 7.4, respectively. In vitro antioxidant capacity of SCMDC encapsulated eugenol was higher than native eugenol, as demonstrated by free radical scavenging assays. In comparison to native eugenol, E:SCMDC eugenol showed reduced toxicity. These findings suggested that nanoencapsulated eugenol (E:SCMDC) have a huge potential in nutraceutical and therapeutic applications.

Recent updates in the polysaccharides-based Nano-biocarriers for drugs delivery and its application in diseases treatment: A review

With people's increasing awareness of diseases treatment, the researchers began to focus on drug delivery to the exact site of action at the optimal rate. Some researchers have proved that many nanostructures loaded with drugs are significantly better than conventional nanostructures. However, the materials from which the nanostructure determines its performance. To use it as a pharmaceutical ingredient, it must meet strict safety regulatory standards worldwide. Therefore, people's attention has paid to easily available natural substances. As far as we know, bioactive polysaccharides are excellent candidates for realizing these purposes. To be precise, due to the natural availability of polysaccharides, it has been widely used in the research of Nano-biocarriers loaded with drugs. Based on the above analysis, the nanomaterials developed through the laboratory have great potential for upgrading to market products. Therefore, it is of great significance to review the latest progress of polysaccharide-based Nano-biocarriers in drug delivery and their application in diseases treatment. In this work, we focused on the preparation of polysaccharides-based Nano-biocarriers, commonly used polysaccharides for preparing Nano-biocarriers, and drugs loaded on polysaccharides-based Nano-biocarriers to treat diseases. Shortly, polysaccharide-based Nano-biocarriers will be increasingly used in drug delivery and treatment of diseases.

Chitosan-based nanocarriers for encapsulation and delivery of curcumin: A review

To overcome the poor aqueous solubility and bioavailability of curcumin, emphasize its functional features, and broaden its applications in the food and pharmaceutical industries, many nanoscale systems have been widely applied for its encapsulation and delivery. Over many decades, chitosan as a natural biopolymer has been extensively studied due to its polycationic nature, biodegradability, biocompatibility, non-toxicity, and non-allergenic. Various chitosan-based nanocarriers with unique properties for curcumin delivery, including but not limited to, self-assembled nanoparticles, nanocomposites, nanoemulsions, nanotubes, and nanofibers, have been designed. This review focuses on the most-recently reported fabrication techniques of different types of chitosan-based nanocarriers. The functionalities of chitosan in each formulation which determine the physicochemical properties such as surface charge, morphology, encapsulation driving force, and release profile, were discussed in detail. Moreover, the current pharmaceutical applications of curcumin-loaded chitosan nanoparticles were elaborated. The role of chitosan in facilitating the delivery of curcumin and improving the therapeutic effects on many chronic diseases, including cancer, bacterial infection, wound healing, Alzheimer's diseases, inflammatory bowel disease, and hepatitis C virus, were illustrated. Particularly, the recently discovered mechanisms of action of curcumin-loaded chitosan nanoparticles against the abovementioned diseases were highlighted.

Polysaccharides-based bio-nanostructures and their potential food applications

Polysaccharides are omnipresent biomolecules that hold great potential as promising biomaterials for a myriad of applications in various biotechnological and industrial sectors. The presence of diverse functional groups renders them tailorable functionalities for preparing a multitude of novel bio-nanostructures. Further, they are biocompatible and biodegradable, hence, considered as environmentally friendly biopolymers. Application of nanotechnology in food science has shown many advantages in improving food quality and enhancing its shelf life. Recently, considerable efforts have been made to develop polysaccharide-based nanostructures for possible food applications. Therefore, it is of immense importance to explore literature on polysaccharide-based nanostructures delineating their food application potentialities. Herein, we reviewed the developments in polysaccharide-based bio-nanostructures and highlighted their potential applications in food preservation and bioactive "smart" food packaging. We categorized these bio-nanostructures into polysaccharide-based nanoparticles, nanocapsules, nanocomposites, dendrimeric nanostructures, and metallo-polysaccharide hybrids. This review demonstrates that the polysaccharides are emerging biopolymers, gaining much attention as robust biomaterials with excellent tuneable properties.