Zwitterionic PMCP-functionalized titanium surface resists protein adsorption, promotes cell adhesion, and enhances osteogenic activity

Functionalization of in vivo tissue-engineered living biotubes enhance patency and endothelization without the requirement of systemic anticoagulant administration

Vascular regeneration and patency maintenance, without anticoagulant administration, represent key developmental trends to enhance small-diameter vascular grafts (SDVG) performance. In vivo engineered autologous biotubes have emerged as SDVG candidates with pro-regenerative properties. However, mechanical failure coupled with thrombus formation hinder translational prospects of biotubes as SDVGs. Previously fabricated poly(ε-caprolactone) skeleton-reinforced biotubes (PBs) circumvented mechanical issues and achieved vascular regeneration, but orally administered anticoagulants were required. Here, highly efficient and biocompatible functional modifications were introduced to living cells on PB lumens. The 1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine-N-methoxy (DMPE)-PEG-conjugated anti-coagulant bivalirudin (DPB) and DMPE-PEG-conjugated endothelial progenitor cell (EPC)-binding TPS-peptide (DPT) modifications possessed functionality conducive to promoting vascular graft patency. Co-modification of DPB and DPT swiftly attained luminal saturation without influencing cell viability. DPB repellent of non-specific proteins, DPB inhibition of thrombus formation, and DPB protection against functional masking of DPT's EPC-capture by blood components, which promoted patency and rapid endothelialization in rat and canine artery implantation models without anticoagulant administration. This strategy offers a safe, facile, and fast technical approach to convey additional functionalization to living cells within tissue-engineered constructs.

Titanium Surface-Grafted Zwitterionic Polymers with an Anti-Polyelectrolyte Effect Enhances Osteogenesis

Zwitterionic polymers have attracted considerable attention because of their anti-adsorption and unique anti-polyelectrolyte effects and was widely used in surface modification. In this study, zwitterionic copolymers (poly (sulfobetaine methacrylate-co-butyl acrylate) (pSB) coating on the surface of a hydroxylated titanium sheet using surface-initiated atom transfer radical polymerization (SI-ATRP) was successfully constructed. X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR) and Water contact angle (WCA) analysis proved the successful preparation of the coating. The swelling effect caused by the anti-polyelectrolyte effect was reflected in the simulation experiment in vitro, and this coating can promote the proliferation and osteogenesis of MC3T3-E1. Therefore, this study provides a new strategy for designing multifunctional biomaterials for implant surface modifications.

Antibacterial Adhesion Strategy for Dental Titanium Implant Surfaces: From Mechanisms to Application

Dental implants are widely used to restore missing teeth because of their stability and comfort characteristics. Peri-implant infection may lead to implant failure and other profound consequences. It is believed that peri-implantitis is closely related to the formation of biofilms, which are difficult to remove once formed. Therefore, endowing titanium implants with anti-adhesion properties is an effective method to prevent peri-implant infection. Moreover, anti-adhesion strategies for titanium implant surfaces are critical steps for resisting bacterial adherence. This article reviews the process of bacterial adhesion, the material properties that may affect the process, and the anti-adhesion strategies that have been proven effective and promising in practice. This article intends to be a reference for further improvement of the antibacterial adhesion strategy in clinical application and for related research on titanium implant surfaces.

Polylactic acid film surface functionalized by zwitterionic poly[2-(methacryloyloxy)ethyl choline phosphate] with improved biocompatibility

Polylactic acid (PLA) is a non-toxic, biodegradable biological material that is widely used in tissue engineering and regenerative medicine. PLA is easy to adsorb non-specific proteins and lacks cell adhesion after implantation. Choline phosphate (CP) is a novel zwitterion with a reverse structure of phosphate choline (PC) on the cell membrane that can form a specific "CP-PC" interaction to promote cell adhesion. In our previous work, modification of choline phosphate polymers (PMCP) onto the PLA film surface improved the hydrophilicity and degradation properties. In this study, we further investigated the biocompatibility of PLA-PMCP films from protein adsorption, cell adhesion and proliferation, bacterial adhesion, blood compatibility, and inflammation in vivo. The PLA-PMCP surface can resist protein adsorption and bacterial adhesion due to the anti-fouling properties of the zwitterion PMCP. Meanwhile, the PLA-PMCP surface promotes the adhesion and proliferation of BMSCs due to the specific "CP-PC" effect. In addition, the PLA-PMCP film has good blood compatibility as well as the PLA film. During in vivo experiments, biocompatibility was improved and the inflammatory response and immune rejection of PLA-PMCP films were reduced compared to those of the original PLA film. Therefore, the PMCP-modified PLA film resists protein adsorption and bacterial adhesion, promotes cell adhesion and proliferation, and has good hemocompatibility and histocompatibility. This brings a significant potential for application in the fields of tissue engineering and regenerative medicine.

Construction of Mussel-Inspired Dopamine-Zn2+ Coating on Titanium Oxide Nanotubes to Improve Hemocompatibility, Cytocompatibility, and Antibacterial Activity

Zinc ions (Zn2+) are a highly potent bioactive factor with a broad spectrum of physiological functions. In situ continuous and controllable release of Zn2+ from the biomaterials can effectively improve the biocompatibility and antibacterial activity. In the present study, inspired by the adhesion and protein cross-linking in the mussel byssus, with the aim of improving the biocompatibility of titanium, a cost-effective one-step metal-catecholamine assembly strategy was developed to prepare a biomimetic dopamine-Zn2+ (DA-Zn2+) coating by immersing the titanium oxide nanotube (TNT) arrays on the titanium surface prepared by anodic oxidation into an aqueous solution containing dopamine (DA) and zinc ions (Zn2+). The DA-Zn2+ coatings with the different zinc contents exhibited excellent hydrophilicity. Due to the continuous release of zinc ions from the DA-Zn2+ coating, the coated titanium oxide nanotubes displayed excellent hemocompatibility characterized by platelet adhesion and activation and hemolysis assay. Moreover, the DA-Zn2+-coated samples exhibited an excellent ability to enhance endothelial cell (EC) adhesion and proliferation. In addition, the DA-Zn2+ coating can also enhance the antibacterial activity of the nanotubes. Therefore, long-term in situ Zn2+-releasing coating of the present study could serve as the bio-surfaces for long-term prevention of thrombosis, improvement of cytocompatibility to endothelial cells, and antibacterial activity. Due to the easy operation and strong binding ability of the polydopamine on various complicated shapes, the method of the present study can be further applied to other blood contact biomaterials or implantable medical devices to improve the biocompatibility.

A Naringin-loaded gelatin-microsphere/nano-hydroxyapatite/silk fibroin composite scaffold promoted healing of critical-size vertebral defects in ovariectomised rat

In this study, we investigated the effect of three-dimensional of naringin/gelatin microspheres/nano-hydroxyapatite/silk fibroin (NG/GMs/nHA/SF) scaffolds on repair of a critical-size bone defect of lumbar 6 in osteoporotic rats. In this work, a cell-free scaffold for bone-tissue engineering based on a silk fibroin (SF)/nano-hydroxyapatite (nHA) scaffold was developed. The scaffold was fabricated by lyophilization. Naringin (NG) was loaded into gelatin microspheres (GMs), which were encapsulated in the nHA/SF scaffolds. The materials were characterized using x ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy and thermogravimetric analysis. Moreover, the biomechanics, degradation, and drug-release profile of the scaffold were also evaluated. In vitro, the effect of the scaffold on the adhesion, proliferation, and osteogenic differentiation of rat bone marrow mesenchymal stem cells (BMSCs) was evaluated. In vivo, at 3 months after ovariectomy, a critical-size lumbar defect was indued in the rats to evaluate scaffold therapeutic potential. A 3-mm defect in L6 developed in 60 SD rats, which were randomly divided into SF scaffold, nHA/SF scaffold, NG/nHA/SF scaffold, NG/GMs/nHA/SF scaffold, and blank groups (n = 12 each). At 4, 8, 12, and 16 weeks postoperatively, osteogenesis was evaluated by X-ray, micro-computed tomography, hematoxylin-eosin staining, and fast green staining, and by analysis of BMP-2, Runx2, and Ocn protein levels at 16 weeks. In our results, NG/GM/nHA/SF scaffolds exhibited good biocompatibility, biomechanical strength, and promoted BMSC adhesion, proliferation, and calcium nodule formation in vitro. Moreover, NG/GMs/nHA/SF scaffolds showed greater osteogenic differentiation potential than the other scaffolds in vitro. In vivo, gradual new bone formation was observed, and bone defects recovered by 16 weeks in the experimental group. In the blank group, limited bone formation was observed, and the bone defect was obvious. In conclusion, NG/GMs/nHA/SF scaffolds promoted repair of a lumbar 6 defect in osteoporotic rats. Therefore, the NG/GMs/nHA/SF biocomposite scaffold has potential as a bone-defect-filling biomaterial for bone regeneration.

Multifunctional Biomedical Materials Derived from Biological Membranes

The delicate structure and fantastic functions of biological membranes are the successful evolutionary results of a long-term natural selection process. Their excellent biocompatibility and biofunctionality are widely utilized to construct multifunctional biomedical materials mainly by directly camouflaging materials with single or mixed biological membranes, decorating or incorporating materials with membrane-derived vesicles (e.g., exosomes), and designing multifunctional materials with the structure/functions of biological membranes. Here, the structure-function relationship of some important biological membranes and biomimetic membranes are discussed, such as various cell membranes, extracellular vesicles, and membranes from bacteria and organelles. Selected literature examples of multifunctional biomaterials derived from biological membranes for biomedical applications, such as drug- and gene-delivery systems, tissue-repair scaffolds, bioimaging, biosensors, and biological detection, are also highlighted. These designed materials show excellent properties, such as long circulation time, disease-targeted therapy, excellent biocompatibility, and selective recognition. Finally, perspectives and challenges associated with the clinical applications of biological-membrane-derived materials are discussed.

Polybetaines in Biomedical Applications

Polybetaines, that have moieties bearing both cationic (quaternary ammonium group) and anionic groups (carboxylate, sulfonate, phosphate/phosphinate/phosphonate groups) situated in the same structural unit represent an important class of smart polymers with unique and specific properties, belonging to the family of zwitterionic materials. According to the anionic groups, polybetaines can be divided into three major classes: poly(carboxybetaines), poly(sulfobetaines) and poly(phosphobetaines). The structural diversity of polybetaines and their special properties such as, antifouling, antimicrobial, strong hydration properties and good biocompatibility lead to their use in nanotechnology, biological and medical fields, water remediation, hydrometallurgy and the oil industry. In this review we aimed to highlight the recent developments achieved in the field of biomedical applications of polybetaines such as: antifouling, antimicrobial and implant coatings, wound healing and drug delivery systems.