Hyaluronic acid-functionalized poly-lactic acid (PLA) microfibers regulate vascular endothelial cell proliferation and phenotypic shape expression

Protective effect of ferulic acid-hyaluronic acid copolymer against UVB irradiation in a human HaCaT cell line

Excessive UVB exposure increased the production of reactive oxygen species (ROS), leading to oxidative damage and epidermal inflammation. To enhance UVB protection effect, a strong phenolic antioxidant, ferulic acid (FA) was designed onto HA via a free radical mediated method. Our previous work has confirmed its structural characterization and in vitro antioxidant. The aim of this study was to evaluate its protective effects against UVB-induced damage in human HaCaT cells. We observed a significant reduction in cell viability to 57.43 % following UVB exposure at a dose of 80 mJ/cm2. However, pretreatment with FA-HA (250 to 2000 μg·mL-1) significantly attenuated cytotoxicity in a dose-dependent manner. Furthermore, FA-HA was found to suppress the intracellular generation of ROS and up-regulated the expression of the antioxidant enzyme superoxide dismutase (SOD). The elevated levels of pro-inflammatory cytokines, including interleukin-1 beta (IL-1β), interleukin-6 (IL-6), interleukin-8 (IL-8) and tumor necrosis factor-alpha (TNF-α) as well as the mRNA expression of matrix metalloproteinase-1/9 (MMP-1/9) induced by UVB irradiation, were also effectively reduced by FA-HA. Additionally, FA-HA treatment decreases the phosphorylation of mitogen-activated protein kinase (MAPK) and activator protein-1 (AP-1), ultimately preventing apoptosis. These findings suggest that FA-HA is a promising candidate for UVB protection in skincare formulations.

Poly(lactide)-Based Materials Modified with Biomolecules: A Review

Poly(lactic acid) (PLA) is characterized by unique features, e.g., it is environmentally friendly, biocompatible, has good thermomechanical properties, and is readily available and biodegradable. Due to the increasing pollution of the environment, PLA is a promising alternative that can potentially replace petroleum-derived polymers. Different biodegradable polymers have numerous biomedical applications and are used as packaging materials. Because the pure form of PLA is delicate, brittle, and is characterized by a slow degradation rate and a low thermal resistance and crystallization rate, these disadvantages limit the range of applications of this polymer. However, the properties of PLA can be improved by chemical or physical modification, e.g., with biomolecules. The subject of this review is the modification of PLA properties with three classes of biomolecules: polysaccharides, proteins, and nucleic acids. A quite extensive description of the most promising strategies leading to improvement of the bioactivity of PLA, through modification with these biomolecules, is presented in this review. Thus, this article deals mainly with a presentation of the major developments and research results concerning PLA-based materials modified with different biomolecules (described in the world literature during the last decades), with a focus on such methods as blending, copolymerization, or composites fabrication. The biomedical and unique biological applications of PLA-based materials, especially modified with polysaccharides and proteins, are reviewed, taking into account the growing interest and great practical potential of these new biodegradable biomaterials.

Biodegradable Tyramine Functional Gelatin/6 Arms-PLA Inks Compatible with 3D Two Photon-Polymerization Printing and Meniscus Tissue Regeneration

The meniscus regeneration can present major challenges such as mimicking tissue microstructuration or triggering cell regeneration. In the case of lesions that require a personalized approach, photoprinting offers the possibility of designing resolutive biomaterial structures. The photo-cross-linkable ink composition determines the process ease and the final network properties. In this study, we designed a range of hybrid inks composed of gelatin(G) and 6-PLA arms(P) that were photo-cross-linked using tyramine groups. The photo-cross-linking efficiency, mechanical properties, degradation, and biological interactions of inks with different G/P mass ratios were studied. The G50P50 network properties were suitable for meniscus regeneration, with Young's modulus of 6.5 MPa, degradation in 2 months, and good cell proliferation. We then confirmed the potential of these inks to produce high-resolution microstructures by printing well-defined microstructures using two-photon polymerization. These hybrid inks offer new perspectives for biocompatible, degradable, and microstructured tissue engineering scaffold creation.

Preparation Method and Application of Porous Poly(lactic acid) Membranes: A Review

Porous membrane technology has garnered significant attention in the fields of separation and biology due to its remarkable contributions to green chemistry and sustainable development. The porous membranes fabricated from polylactic acid (PLA) possess numerous advantages, including a low relative density, a high specific surface area, biodegradability, and excellent biocompatibility. As a result, they exhibit promising prospects for various applications, such as oil-water separation, tissue engineering, and drug release. This paper provides an overview of recent research advancements in the fabrication of PLA membranes using electrospinning, the breath-figure method, and the phase separation method. Firstly, the principles of each method are elucidated from the perspective of pore formation. The correlation between the relevant parameters and pore structure is discussed and summarized, subsequently followed by a comparative analysis of the advantages and limitations of each method. Subsequently, this article presents the diverse applications of porous PLA membranes in tissue engineering, oil-water separation, and other fields. The current challenges faced by these membranes, however, encompass inadequate mechanical strength, limited production efficiency, and the complexity of pore structure control. Suggestions for enhancement, as well as future prospects, are provided accordingly.

Cross-linking electrospinning

Although electrospinning (e-spinning) has witnessed rapid development in recent years, it has also been criticized by environmentalists due to the use of organic solvents. Therefore, aqueous e-spinning (green e-spinning) is considered a more attractive technique. However, considering the poor water resistance and mechanical properties of electrospun (e-spun) nanofibers, cross-linking is a perfect solution. In this review, we systematically discuss the cross-linking e-spinning system for the first time, including cross-linking strategies (in situ, liquid immersion, vapor, and spray cross-linking), cross-linking mechanism (physical and chemical cross-linking) of e-spun nanofibers, and the various applications (e.g., tissue engineering, drug delivery, water treatment, food packaging, and sensors) of cross-linked e-spun nanofibers. Among them, we highlight several cross-linking methods, including UV light cross-linking, electron beam cross-linking, glutaraldehyde (and other commonly used cross-linking agents) chemical cross-linking, thermal cross-linking, and enzymatic cross-linking. Finally, we confirm the significance of cross-linking e-spinning and reveal the problems in the construction of this system.

Revealing the Role of Zinc Ions in Atherosclerosis Therapy via an Engineered Three-Dimensional Pathological Model

An incomplete understanding of the cellular functions and underlying mechanisms of zinc ions released from zinc-based stents in atherosclerosis (AS) therapy is one of the major obstacles to their clinical translation. The existing evaluation methodology using cell monolayers has limitations on accurate results due to the lack of vascular architectures and pathological features. Herein, the authors propose a 3D biomimetic AS model based on a multi-layer vascular structure comprising endothelial cells and smooth muscle cells with hyperlipidemic surroundings and inflammatory stimulations as AS-prone biochemical conditions to explore the biological functions of zinc ions in AS therapy. Concentration-dependent biphasic effects of zinc ions on cell growth are observed both in cell monolayers and 3D AS models. Nevertheless, the cells within 3D AS model exhibit more accurate biological assessments of the zinc ions, as evidenced by augmented pathological features and significantly higher half-maximal inhibitory concentration values against zinc ions. Based on such a developed 3D biomimetic AS model, the inhibitory effects on the deoxyribonucleic acid (DNA) synthesis, significantly influenced biological processes like cell motility, proliferation, and adhesion, and several potential bio-targets of zinc ions of cells are revealed.

Hydrogel coating based on dopamine-modified hyaluronic acid and gelatin with spatiotemporal drug release capacity for quick endothelialization and long-term anticoagulation

Due to the vital roles of vascular intima in preventing thrombus generation and maintaining vascular patency, methods to promote quick endothelialization on vascular grafts have drawn much attention. In this study, we novelly applied a double-layered hydrogel coating with spatiotemporal drug release capacity on a polycaprolactone (PCL) fibrous scaffold. The composite coating consisted of an inner dopamine-modified hyaluronic acid (HA) hydrogel and an outer gelatin hydrogel, which were generated via different crosslinking methods. Especially, heparin and chondroitin sulfate were introduced to the HA and gelatin hydrogels during the processing, thus endowing the vascular scaffold spatiotemporal drug release behavior. The composite coating developed surface hydrophilicity and mechanical properties of the PCL scaffold meanwhile stimulating the proliferation and angiogenesis behaviors of endothelial cells. Long-term anticoagulation property of the modified scaffold was also demonstrated in vitro. This investigation provides a universal strategy for quick endothelialization and long-term anticoagulation promotion of vascular grafts, which may be potentially used in treating cardiovascular diseases.

Pullulan as promoting endothelialization capacity of electrospun PCL-PU scaffold

OBJECTIVE

This project's primary purpose was to create engineered vascular scaffolds using polyurethane, polycaprolactone, and pullulan polymers, along with suitable mechanical-dynamic conditions. Therefore, electrospun scaffolds with optimized intrinsic physiological properties and the ability to support endothelial cells were prepared in vitro, and cell viability was studied in PCL-PU and PCL-PU scaffolds containing Pullulan.

THE MAIN METHODS

The electrospinning method has been used to prepare PCL-PU and PCL-PU scaffolds containing Pullulan. The scaffold's surface morphology was evaluated using SEM microscopic imaging. The scaffolds' physicochemical properties were prepared using ATR-FTIR, strain stress, and water contact angle tests, and the biocompatibility of PCL-PU and PU-PCL-Pl nanofibers was evaluated using the MTT test.

PRINCIPAL FINDINGS

The test results showed that PCL-PU scaffolds containing Pullulan have more suitable mechanical properties such as stress-strain, water contact angle, swelling rate, biocompatibility, fiber diameter, and pore size compared to PU-PCL. The culture of endothelial cells under static conditions on these scaffolds did not cause cytotoxic effects under static conditions compared to the control group. SEM images confirmed the ability of endothelial cells to attach to the scaffold surface.

SUMMARY AND CONCLUSION

The results showed that PCL-PU substrate containing pullulan could stimulate endothelial cells' proliferation under static conditions.

Effect of Polyhydroxyalkanoate (PHA) Concentration on Polymeric Scaffolds Based on Blends of Poly-L-Lactic Acid (PLLA) and PHA Prepared via Thermally Induced Phase Separation (TIPS)

Hybrid porous scaffolds composed of both natural and synthetic biopolymers have demonstrated significant improvements in the tissue engineering field. This study investigates for the first time the fabrication route and characterization of poly-L-lactic acid scaffolds blended with polyhydroxyalkanoate up to 30 wt%. The hybrid scaffolds were prepared by a thermally induced phase separation method starting from ternary solutions. The microstructure of the hybrid porous structures was analyzed by scanning electron microscopy and related to the blend composition. The porosity and the wettability of the scaffolds were evaluated through gravimetric and water contact angle measurements, respectively. The scaffolds were also characterized in terms of the surface chemical properties via Fourier transform infrared spectroscopy in attenuated total reflectance. The mechanical properties were analyzed through tensile tests, while the crystallinity of the PLLA/PHA scaffolds was investigated by differential scanning calorimetry and X-ray diffraction.

Gelatin-based electrospun and lyophilized scaffolds with nano scale feature for bone tissue engineering application: review

The rebuilding of the normal functioning of the damaged human body bone tissue is one of the main objectives of bone tissue engineering (BTE). Fabricated scaffolds are mostly treated as artificial supports and as materials for regeneration of neo bone tissues and must closely biomimetic the native extracellular matrix of bone. The materials used for developing scaffolds should be biodegradable, nontoxic, and biocompatible. For the resurrection of bone disorder, specifically natural and synthetic polymers such as chitosan, PCL, gelatin, PGA, PLA, PLGA, etc. meet the requirements for serving their functions as artificial bone substitute materials. Gelatin is one of the potential candidates which could be blended with other polymers or composites to improve its physicochemical, mechanical, and biological performances as a bone graft. Scaffolds are produced by several methods including electrospinning, self-assembly, freeze-drying, phase separation, fiber drawing, template synthesis, etc. Among them, freeze-drying and electrospinning are among the popular, simplest, versatile, and cost-effective techniques. The design and preparation of freeze-dried and electrospun scaffolds are of intense research over the last two decades. Freeze-dried and electrospun scaffolds offer a distinctive architecture at the micro to nano range with desired porosity and pore interconnectivity for selective movement of small biomolecules and play its role as an appropriate matrix very similar to the natural bone extracellular matrix. This review focuses on the properties and functionalization of gelatin-based polymer and its composite in the form of bone scaffolds fabricated primarily using lyophilization and electrospinning technique and their applications in BTE.

Endothelialization strategy of implant materials surface: The newest research in recent 5 years

In recent years, more and more metal or non-metal materials have been used in the treatment of cardiovascular diseases, but the vascular complications after transplantation are still the main factors restricting the clinical application of most grafts, such as acute thrombosis and graft restenosis. Implant materials have been extensively designed and surface optimized by researchers, but it is still too difficult to avoid complications. Natural vascular endodermis has excellent function, anti-coagulant and anti-intimal hyperplasia, and it is also the key to maintaining the homeostasis of normal vascular microenvironment. Therefore, how to promote the adhesion of endothelial cells (ECs) on the surface of cardiovascular materials to achieve endothelialization of the surface is the key to overcoming the complications after implant materialization. At present, the surface endothelialization design of materials based on materials surface science, bioactive molecules, and biological function intervention and feedback has attracted much attention. In this review, we summarize the related research on the surface modification of materials by endothelialization in recent years, and analyze the advantages and challenges of current endothelialization design ideas, explain the relationship between materials, cells, and vascular remodeling in order to find a more ideal endothelialization surface modification strategy for future researchers to meet the requirements of clinical biocompatibility of cardiovascular materials.

In vivo performance of electrospun tubular hyaluronic acid/collagen nanofibrous scaffolds for vascular reconstruction in the rabbit model

One of the main challenges of tissue-engineered vascular prostheses is restenosis due to intimal hyperplasia. The aim of this study is to develop a material for scaffolds able to support cell growth while tolerating physiological conditions and maintaining the patency of carotid artery model. Tubular hyaluronic acid (HA)-functionalized collagen nanofibrous composite scaffolds were prepared by sequential electrospinning method. The tubular composite scaffold has well-controlled biophysical and biochemical signals, providing a good matrix for the adhesion and proliferation of vascular endothelial cells (ECs), but resisting to platelets adhesion when exposed to blood. Carotid artery replacement experiment from 6-week rabbits showed that the HA/collagen nanofibrous composite scaffold grafts with endothelialization on the luminal surface could maintain vascular patency. At retrieval, the composite scaffold maintained good structural integrity and had comparable mechanical strength as the native artery. This study indicating that electrospun scaffolds combined with cells may become an alternative to prosthetic grafts for vascular reconstruction.

Photo-crosslinked hyaluronic acid hydrogel as a biomimic extracellular matrix to recapitulate in vivo features of breast cancer cells

2D cell culture is widely utilized to develop anti-cancer drugs and to explore the mechanisms of cancer tumorigenesis and development. However, the findings obtained from 2D culture often fail to provide guidance for clinical tumor treatments since it cannot precisely replicate the features of real tumors. 3D tumor models capable of recapitulating native tumor microenvironments have been proved to be a promising alternative technique. Herein, we constructed a breast tumor model from novel hyaluronic acid (HA) hydrogel which was prepared through photocrosslinking of methacrylated HA. The hydrogel was used as a biomimetic extracellular matrix to incubate MCF-7 cells. It was found that methacrylation degree had great effects on hydrogel's microstructure, mechanical performances, and liquid-absorbing and degradation abilities. Optimized hydrogel exhibited highly porous morphology, high equilibrium swelling ratio, suitable mechanical properties, and hyaluronidase-responsive degradation behavior. The results demonstrated that the HA hydrogel facilitated MCF-7 cell proliferation and growth in an aggregation manner. Furthermore, 3D-cultured MCF-7 cells not only up-regulated the expression of VEGF, bFGF and interleukin-8 but exhibited greater invasion and tumorigenesis capabilities compared with 2D-cultured cells. Therefore, the HA hydrogel is a reliable substitute for tumor model construction.

Hyaluronic Acid/Collagen Nanofiber Tubular Scaffolds Support Endothelial Cell Proliferation, Phenotypic Shape and Endothelialization

In this study, we designed and synthetized artificial vascular scaffolds based on nanofibers of collagen functionalized with hyaluronic acid (HA) in order to direct the phenotypic shape, proliferation, and complete endothelization of mouse primary aortic endothelial cells (PAECs). Layered tubular HA/collagen nanofibers were prepared using electrospinning and crosslinking process. The obtained scaffold is composed of a thin inner layer and a thick outer layer that structurally mimic the layer the intima and media layers of the native blood vessels, respectively. Compared with the pure tubular collagen nanofibers, the surface of HA functionalized collagen nanofibers has higher anisotropic wettability and mechanical flexibility. HA/collagen nanofibers can significantly promote the elongation, proliferation and phenotypic shape expression of PAECs. In vitro co-culture of mouse PAECs and their corresponding smooth muscle cells (SMCs) showed that the luminal endothelialization governs the biophysical integrity of the newly formed extracellular matrix (e.g., collagen and elastin fibers) and structural remodeling of SMCs. Furthermore, in vitro hemocompatibility assays indicated that HA/collagen nanofibers have no detectable degree of hemolysis and coagulation, suggesting their promise as engineered vascular implants.