Construction of a multifunctional 3D nanofiber aerogel loaded with ZnO for wound healing

Electrospinning/3D printing drug-loaded antibacterial polycaprolactone nanofiber/sodium alginate-gelatin hydrogel bilayer scaffold for skin wound repair

Skin injuries and defects, as a common clinical issue, still cannot be perfectly repaired at present, particularly large-scale and infected skin defects. Therefore, in this work, a drug-loaded bilayer skin scaffold was developed for repairing full-thickness skin defects. Briefly, amoxicillin (AMX) was loaded on polycaprolactone (PCL) nanofiber via electrospinning to form the antibacterial nanofiber membrane (PCL-AMX) as the outer layer of scaffold to mimic epidermis. To maintain wound wettability and promote wound healing, external human epidermal growth factor (rhEGF) was loaded in sodium alginate-gelatin to form the hydrogel structure (SG-rhEGF) via 3D printing as inner layer of scaffold to mimic dermis. AMX and rhEGF were successfully loaded into the scaffold. The scaffold exhibited excellent physicochemical properties, with elongation at break and tensile modulus were 102.09 ± 6.74% and 206.83 ± 32.10 kPa, respectively; the outer layer was hydrophobic (WCA was 112.09 ± 4.67°), while the inner layer was hydrophilic (WCA was 48.87 ± 5.52°). Meanwhile, the scaffold showed excellent drug release and antibacterial characteristics. In vitro and in vivo studies indicated that the fabricated scaffold could enhance cell adhesion and proliferation, and promote skin wound healing, with favorable biocompatibility and great potential for skin regeneration and clinical application.

Coaxial nanofibrous aerogel featuring porous network-structured channels for ovarian cancer treatment by sustained release of chitosan oligosaccharide

Ovarian cancer, the deadliest gynecological malignancy, primarily treated with chemotherapy. However, systemic chemotherapy often leads to severe toxic side effects and chemoresistance. Drug-loaded aerogels have emerged as a promising method for drug delivery, as they can improve drug solubility and bioavailability, control drug release, and reduce drug distribution in non-targeted tissues, thereby minimizing side effects. In this research, chitosan oligosaccharide (COS)-loaded nanofibers composite chitosan (CS) aerogels (COS-NFs/CS) with a porous network structure were created using nanofiber recombination and freeze-drying techniques. The core layer of the aerogel has a COS loading rate of 60 %, enabling the COS-NFs/CS aerogel to significantly inhibit the migration and proliferation of ovarian cancer cells (resulting in a decrease in the survival rate of ovarian cancer cells to 33.70 % after 48 h). The coaxial fiber's unique shell-core structure and the aerogel's porous network structure enable the COS-NFs/CS aerogels to release COS steadily and slowly over 30 days, effectively reducing the initial burst release of COS. Additionally, the COS-NFs/CS aerogels exhibit good biocompatibility, degradability (only retaining 18.52 % of their weight after 6 weeks of implantation), and promote angiogenesis, thus promoting wound healing post-oophorectomy. In conclusion, COS-NFs/CS aerogels show great potential for application in the treatment of ovarian cancer.

A chitosan-coated PCL/nano-hydroxyapatite aerogel integrated with a nanofiber membrane for providing antibacterial activity and guiding bone regeneration

A guided bone regeneration (GBR) membrane can act as a barrier to prevent the invasion and interference from foreign soft tissues, promoting infiltration and proliferation of osteoblasts in the bone defect area. Herein, a composite scaffold with dual functions of osteogenesis and antibacterial effects was prepared for GBR. A polycaprolactone (PCL)/nano-hydroxyapatite (n-HA) aerogel produced by electrospinning and freeze-drying techniques was fabricated as the loose layer of the scaffold, while a PCL nanofiber membrane was used as the dense layer. Chitosan (CS) solution served as a middle layer to provide mechanical support and antibacterial effects between the two layers. Morphological results showed that the loose layer had a porous structure with n-HA successfully dispersed in the aerogels, while the dense layer possessed a sufficiently dense structure. In vitro antibacterial experiments illustrated that the CS solution in the middle layer stabilized the scaffold structure and endowed the scaffold with good antibacterial properties. The cytocompatibility results indicated that both fibroblasts and osteoblasts exhibited superior cell activity on the dense and loose layers, respectively. In particular, the dense layer made of nanofibers could work as a barrier layer to inhibit the infiltration of fibroblasts into the loose layer. In vitro osteogenesis analysis suggested that the PCL/n-HA aerogel could enhance the bone induction ability of bone mesenchymal stem cells, which was confirmed by the increased expression of the alkaline phosphatase activity. The loose structure facilitated the infiltration and migration of bone mesenchymal stem cells for better osteogenesis. In summary, such a composite scaffold exhibited excellent osteogenic and antibacterial properties as well as the barrier effect, thus holding promising potential for use as GBR materials.

New dimensions of electrospun nanofiber material designs for biotechnological uses

Electrospinning technology has garnered wide attention over the past few decades in various biomedical applications including drug delivery, cell therapy, and tissue engineering. This technology can create nanofibers with tunable fiber diameters and functionalities. However, the 2D membrane nature of the nanofibers, as well as the rigidity and low porosity of electrospun fibers, lower their efficacy in tissue repair and regeneration. Recently, new avenues have been explored to resolve the challenges associated with 2D electrospun nanofiber membranes. This review discusses recent trends in creating different electrospun nanofiber microstructures from 2D nanofiber membranes by using various post-processing methods, as well as their biotechnological applications.

ZnO based 0-3D diverse nano-architectures, films and coatings for biomedical applications

Thin-film nano-architecting is a promising approach that controls the properties of nanoscale surfaces to increase their interdisciplinary applications in a variety of fields. In this context, zinc oxide (ZnO)-based various nano-architectures (0-3D) such as quantum dots, nanorods/nanotubes, nanothin films, tetrapods, nanoflowers, hollow structures, etc. have been extensively researched by the scientific community in the past decade. Owing to its unique surface charge transport properties, optoelectronic properties and reported biomedical applications, ZnO has been considered as one of the most important futuristic bio-nanomaterials. This review is focused on the design/synthesis and engineering of 0-3D nano-architecture ZnO-based thin films and coatings with tunable characteristics for multifunctional biomedical applications. Although ZnO has been extensively researched, ZnO thin films composed of 0-3D nanoarchitectures with promising thin film device bio-nanotechnology applications have rarely been reviewed. The current review focuses on important details about the technologies used to make ZnO-based thin films, as well as the customization of properties related to bioactivities, characterization, and device fabrication for modern biomedical uses that are relevant. It features biosensing, tissue engineering/wound healing, antibacterial, antiviral, and anticancer activity, as well as biomedical diagnosis and therapy with an emphasis on a better understanding of the mechanisms of action. Eventually, key issues, experimental parameters and factors, open challenges, etc. in thin film device fabrications and applications, and future prospects will be discussed, followed by a summary and conclusion.

Construction of asymmetric dual-layer polysaccharide-based porous structure on multiple sources for potential application in biomedicine

Biomedical materials can produce high efficiency and special behavior with an integrated internal structure. It is possible that changing the structure of biomedical materials could extend and promote the application of eco-friendly and multifunctional biomaterials. However, the instantaneous formation of complex structures between tannic acid (TA) and polysaccharides is disrupted, and the reconstruction of the new porous structure becomes a key issue. Here, we present an innovative one-step forming method for an asymmetric dual-layer porous structure of carboxymethyl chitosan (CC)/sodium alginate (SA)/TA, which can be utilized in various biomedical applications. Even after 6 months of storage, it still demonstrates a range of desirable properties including tailorable performance, efficient antibacterial activity, ultrarapid antioxidant activity, low differential blood clotting index and cytotoxicity. This suggests its potential for regulating and controlling wound bleeding, providing flexible possibilities for potential applications in biomedicine.

Sodium alginate/poly(vinyl alcohol)/taxifolin nanofiber mat promoting diabetic wound healing by modulating the inflammatory response, angiogenesis, and skin flora

Diabetes-related ulcers are still a therapeutic problem because of their susceptibility to infection, ongoing inflammation, and diminished vascularization. The design and development of novel dressings are clinically urgent for the treatment of chronic wounds due to diabetic ulcers. In this study, we made taxifolin (TAX) loaded sodium alginate (SA)/poly(vinyl alcohol) (PVA) nanofibers for the treatment of chronic wounds. The SA/PVA/TAX nanofibers that have been created are smooth and bead-free, with good thermal stability, hydrophilicity, and mechanical properties. The release profile indicated a sustained drug release, with a cumulative release rate of 64.6 ± 3.7 % at 24 h. In vitro experiments have shown that SA/PVA/TAX has good antibacterial activity, antioxidant activity, and biocompatibility. In vivo experiments have shown that SA/PVA/TAX exhibits desirable biochemical properties and is involved in the diabetic wound healing process by promoting cell proliferation (Ki67), angiogenesis (CD31, VEGFA), and alleviating inflammation (CD68). Western blotting experiments suggest that SA/PVA/TAX may promote diabetic wound healing by inhibiting the TLR4/NF-κB/NLRP3 signaling pathway and upregulating the expression of VEGFA and PDGFA. The 16S rRNA sequencing results showed that SA/PVA/TAX increased the wound surface flora's diversity and reversed the skin microbiota's structural imbalance. Therefore, SA/PVA/TAX can promote diabetic wound healing by modulating the inflammatory response, angiogenesis, and skin flora and has the potential to be an excellent wound dressing.

Nanotechnology-based techniques for hair follicle regeneration

The hair follicle (HF) is a multicellular complex structure of the skin that contains a reservoir of multipotent stem cells. Traditional hair repair methods such as drug therapies, hair transplantation, and stem cell therapy have limitations. Advances in nanotechnology offer new approaches for HF regeneration, including controlled drug release and HF-specific targeting. Until recently, embryogenesis was thought to be the only mechanism for forming hair follicles. However, in recent years, the phenomenon of wound-induced hair neogenesis (WIHN) or de novo HF regeneration has gained attention as it can occur under certain conditions in wound beds. This review covers HF-specific targeting strategies, with particular emphasis on currently used nanotechnology-based strategies for both hair loss-related diseases and HF regeneration. HF regeneration is discussed in several modalities: modulation of the hair cycle, stimulation of progenitor cells and signaling pathways, tissue engineering, WIHN, and gene therapy. The HF has been identified as an ideal target for nanotechnology-based strategies for hair regeneration. However, some regulatory challenges may delay the development of HF regeneration nanotechnology based-strategies, which will be lastly discussed.

Sea Cucumber-Inspired Aerogel for Ultrafast Hemostasis of Open Fracture

The symptomatic management of hemorrhagic shock complicated by open fractures is a great challenge, because it is also complicated by complex wound bleeding, bacterial infection, and bone defects. Inspired by the water absorption and cross-sectional microstructure of sea cucumbers, in this study, a new sea cucumber-like aerogel (GCG) is proposed. Its aligned porous structure and composition can stop bleeding rapidly and effectively with a blood clotting index of 3.73 ± 1.8%. More importantly, the data of in vivo hemostasis test in an amputating rat tail hemostatic model (15.69 ± 2.45 s, 26.95 ± 8.43 mg) and liver puncture bleeding model (23.77 ± 2.68 s, 36.22 ± 16.92 mg) also indicate the excellent hemostatic performance of GCG. In addition, GCG also shows a significant inhibitory effect on S. aureus and E. coli, which can prevent the occurrence of postoperative osteomyelitis. Not only that, after filling in the bone defect, it is shown that this GCG aerogel completely degrades eight weeks after surgery and induces new bone ingrowth, achieving functional regeneration after hemostasis of an open fracture defect. Generally, because of its combination of hemostatic, antibacterial, and osteogenic activities, this new aerogel is a promising option for open fractures treatment.

Antimicrobial Nano-Zinc Oxide Biocomposites for Wound Healing Applications: A Review

Chronic wounds are a major concern for global health, affecting millions of individuals worldwide. As their occurrence is correlated with age and age-related comorbidities, their incidence in the population is set to increase in the forthcoming years. This burden is further worsened by the rise of antimicrobial resistance (AMR), which causes wound infections that are increasingly hard to treat with current antibiotics. Antimicrobial bionanocomposites are an emerging class of materials that combine the biocompatibility and tissue-mimicking properties of biomacromolecules with the antimicrobial activity of metal or metal oxide nanoparticles. Among these nanostructured agents, zinc oxide (ZnO) is one of the most promising for its microbicidal effects and its anti-inflammatory properties, and as a source of essential zinc ions. This review analyses the most recent developments in the field of nano-ZnO–bionanocomposite (nZnO-BNC) materials—mainly in the form of films, but also hydrogel or electrospun bandages—from the different preparation techniques to their properties and antibacterial and wound-healing performances. The effect of nanostructured ZnO on the mechanical, water and gas barrier, swelling, optical, thermal, water affinity, and drug-release properties are examined and linked to the preparation methods. Antimicrobial assays over a wide range of bacterial strains are extensively surveyed, and wound-healing studies are finally considered to provide a comprehensive assessment framework. While early results are promising, a systematic and standardised testing procedure for the comparison of antibacterial properties is still lacking, partly because of a not-yet fully understood antimicrobial mechanism. This work, therefore, allowed, on one hand, the determination of the best strategies for the design, engineering, and application of n-ZnO-BNC, and, on the other hand, the identification of the current challenges and opportunities for future research.

Antibacterial Collagen-Based Nanocomposite Dressings for Promoting Infected Wound Healing

Pathogenic bacterial infection is the most frequent wound complication, which has become a major clinical and healthcare challenge in wound management worldwide, leading to impaired healing processes, the risk of amputation, and even death. Here, collagen-based nanocomposite dressings (APZC) with broad-spectrum antibacterial activity are developed to promote the infected full-thickness wound healing. Short rod-like shaped ZnO NPs are synthesized and then coated with polydopamine (PDA) to obtain PDA coated ZnO NPs (PDA@ZnO NPs). Afterward, PDA@ZnO NPs are conjugated on the backbone of a collagen chain, and the obtained collagen-PDA@ZnO NPs conjugate is crosslinked by dialdehyde sodium alginate to fabricate APZC dressings. PDA@ZnO NPs show well dispersibility and are uniformly incorporated into the collagen matrix. APZC dressings have interconnected microporous structure and great physicochemical properties, besides good blood coagulation performance and well cytocompatibility. APZC dressings demonstrate long-lasting and excellently broad-spectrum antimicrobial activity, which can relieve the inflammatory reaction by killing pathogenic bacteria and induce the generation of blood vessels and the orderly deposition of collagen in the wound site, thus promoting infected full-thickness wound healing without obvious scar formation. Overall, the functionalized collagen-based nanocomposite dressings have great potential in the clinical treatment against bacteria-associated wound infection.

Biomimetic three-layer hierarchical scaffolds for efficient water management and cell recruitment

Taking inspiration from the structures of roots, stems and leaves of trees in nature, a biomimetic three-layered scaffold was designed for efficient water management and cell recruitment. Using polycaprolactone (PCL) and polyacrylonitrile (PAN) as raw materials, radially oriented nanofiber films and multistage adjustable nanofiber films were prepared through electrospinning technology as the base skin-friendly layer (roots) and middle unidirectional moisture conductive material (stems), the porous polyurethane foam was integrated as the outer moisturizing layer (leaves). Among which, radially oriented nanofiber films could promote the directional migration of fibroblasts and induce cell morphological changes. For the spatially hierarchically nanofiber films, the unidirectional transport of liquid was effectively realized. While the porous polyurethane foam membrane could absorb 9 times its weight in biofluid and retain moisture for up to 10 h. As a result, the biomimetic three-layered scaffolds with different structures can promote wound epithelization and drain biofluid while avoiding wound inflammation caused by excessive biofluid, which is expected to be applied in the field of skin wounds.

Construction of an antibacterial hydrogel based on diammonium glycyrrhizinate and gallic acid for bacterial- infected wound healing

The current antibacterial wound dressings with antibiotic substances or metal bactericidal agents may lead to severe multidrug resistance and poor biocompatibilities. Herein, we report an inherent antibacterial hydrogel constructed by only two naturally small molecules gallic acid (GA) and diammonium glycyrrhizinate (DG) for promoting Staphylococcus aureus (S. aureus)-infected wound healing. The resultant GAD hydrogel can be fabricated by co-assembly of these two materials through simple steps. Thanks to the incorporation of GA and DG, GAD hydrogel enabled a strong mechanical performance and great self-healing property with a sustained-release of drugs into skin wounds. Moreover, the cell viability assays showed that GAD hydrogel had good cytocompatibility by promoting cell proliferation and migration. In addition, GAD hydrogel had broad antibacterial efficiency against both Gram-positive and Gram-negative bacteria. Taken together, GAD hydrogel is a promising dressing to accelerate bacterial-infected wound healing through reconstructing an intact and thick epidermis without antibiotics or cytokines.

Electrospinning Inorganic Nanomaterials to Fabricate Bionanocomposites for Soft and Hard Tissue Repair

Tissue engineering (TE) has attracted the widespread attention of the research community as a method of producing patient-specific tissue constructs for the repair and replacement of injured tissues. To date, different types of scaffold materials have been developed for various tissues and organs. The choice of scaffold material should take into consideration whether the mechanical properties, biodegradability, biocompatibility, and bioresorbability meet the physiological properties of the tissues. Owing to their broad range of physico-chemical properties, inorganic materials can induce a series of biological responses as scaffold fillers, which render them a good alternative to scaffold materials for tissue engineering (TE). While it is of worth to further explore mechanistic insight into the use of inorganic nanomaterials for tissue repair, in this review, we mainly focused on the utilization forms and strategies for fabricating electrospun membranes containing inorganic components based on electrospinning technology. A particular emphasis has been placed on the biological advantages of incorporating inorganic materials along with organic materials as scaffold constituents for tissue repair. As well as widely exploited natural and synthetic polymers, inorganic nanomaterials offer an enticing platform to further modulate the properties of composite scaffolds, which may help further broaden the application prospect of scaffolds for TE.

Layer-by-layer assembly of peptides-decorated coaxial nanofibrous membranes with antibiofilm and visual pH sensing capability

The countermeasure of biofilm infections leaving a challenge due to a dense antibiotic-resistant barrier formed by extracellular polymeric substances (EPS). Although antibiotic alternative methods have been developed to combat biofilms, develop effective remedies coupling with timely feedback about the therapeutic effect are still in urgent demand. To this end, we construct an intelligent coaxial electrospun nanofibrous membranes (ENMs) that integrated therapy of infections and in situ visualized diagnosis. Specifically, pH-sensitive alizarin was incorporated into polyamide 6 to subtly consist core layer and curcumin (Cur) was formulated with degradable polyglycolic acid (PGA) to composed of the shell layer. The shell layer can gradually release curcumin along with the degradation of PGA. Moreover, epsilon-poly-_L-lysine (ε-PL) was deposited on coaxial ENMs via layer-by-layer self-assembly technique to disturb EPS integrity. As a result of the treatment, two different Gram-positive and Gram-negative bacteria displayed increased susceptibility to the drug hybrids. The degradation of PGA would trigger a sustained release of Cur and ε-PL, and once the core layer exposing, the acidic microenvironment of Staphylococcus aureus and Pseudomonas aeruginosa biofilm could be detected in situ by emerging visualized color change to timely feedback. Besides, the ENMs showed good biocompatibility. It paves a feasible and effective avenue for constructing a facile treatment and diagnosis platform for wound biofilm infections.

All-Aqueous Microfluidics Fabrication of Multifunctional Bioactive Microcapsules Promotes Wound Healing

Wound healing involves multiple stages of body responses, including hemostasis, inflammation, cell proliferation, and tissue remodeling. New material design satisfying all demands throughout different stages of wound healing is cherished but rarely discussed. Here we introduce all-aqueous multiphase microfluidics as a novel strategy to fabricate self-assembled, multifunctional alkylated chitosan/alginate microcapsules (SAAMs) as novel therapeutic materials for rapid blood coagulation and wound healing. SAAMs are structurally distinguished by their ultrathin shells with polycationic surface for rapid activation of clotting cascade and their internal porous dextran-rich cores for fast absorption of blood and exudate. These features endow SAAMs with excellent hemostatic properties for acute hemorrhage. Moreover, the alkylated chitosan within the microcapsules exhibits persistent antimicrobial activities against bactericidal infections due to their amphiphilic and cationic surfaces. Besides, cytokines can be safely loaded into the organic-solvent-free microcapsules and released precisely to promote the proliferation of epidermal cells, supporting the subsequent development of granulation tissue and suppression of inflammation in the last stages of wound healing. With the ability to fabricate size-tailored soft microcapsules and to realize time-sequential functions for tissue repairing, the presented "all-aqueous microfluidics generation of multifunctional bioactive SAAMs" create a versatile and robust paradigm for wound treatment.

In vitro and in vivo Evaluation of the Bioactive Nanofibers-Encapsulated Benzalkonium Bromide for Accelerating Wound Repair with MRSA Skin Infection

Purpose

Developing the ideal drug or dressing is a serious challenge to controlling the occurrence of antibacterial infection during wound healing. Thus, it is important to prepare novel nanofibers for a wound dressing that can control bacterial infections. In our study, the novel self-assembled nanofibers of benzalkonium bromide with bioactive peptide materials of IKVAV and RGD were designed and fabricated.

Methods

Different drug concentration effects of encapsulation efficacy, swelling ratio and strength were determined. Its release profile in simulated wound fluid and its cytotoxicity were studied in vitro. Importantly, the antibacterial efficacy, inhibition of biofilm formation effect and wound healing against MRSA infections in vitro and in vivo were performed after observing the tissue toxicity in vivo.

Results

It was found that the optimized drug load (0.8%) was affected by the encapsulation efficacy, swelling ratio, and strength. In addition, the novel nanofibers with average diameter (222.0 nm) and stabile zeta potential (−11.2 mV) have good morphology and characteristics. It has a delayed released profile in the simulated wound fluid and good biocompatibility with L929 cells and most tissues. Importantly, the nanofibers were shown to improve antibacterial efficacy, inhibit biofilm formation, and lead to accelerated wound healing following infection with methicillin-resistant Staphylococcus aureus.

Conclusion

These data suggest that novel nanofibers could effectively shorten the wound-healing time by inhibiting biofilm formation, which make it promising candidates for treatment of MRSA-induced wound infections.

Point your SmartPhone at the code above. If you have a QR code reader the video abstract will appear. Or use:

https://youtu.be/wBXjQQOPzyc

SF/PVP nanofiber wound dressings loaded with phlorizin: preparation, characterization, in vivo and in vitro evaluation

Electrospinning-based wound dressings have multiple functions such as antibacterial, anti-inflammatory, and therapeutic, and are important in skin wound care. Herein, we designed a phlorizin (PHL)-loaded silk protein/polyvinylpyrrolidone (SF/PVP) composite nanofibrous membrane, which can be used as multiple wound dressings. In particular, SF/PVP/PHL scaffolds have high porosity and mechanical properties, exhibiting suitable permeability and hydrophilicity. The SF/PVP/PHL scaffolds containing PHL also have excellent antibacterial and antioxidant activities. Furthermore, the nanofiber significantly accelerated the wound healing process in a full-thickness skin injury model by enhancing wound re-epithelialization and collagen deposition density, increasing the content of macrophage antigen (CD68), platelet-endothelial cell adhesion molecule (CD31), proliferating cell nuclear antigen (PCNA) and inhibiting the expression of α-smooth muscle actin (α-SMA) at the wound site. The mechanism may be related to the inhibition of activation of phosphatidylinositol 3-kinase/serine-threonine kinase/ target of rapamycin (PI3K/AKT/mTOR) signaling pathway to enhance autophagy. Therefore, SF/PVP/PHL nanofibers can ideally meet the various requirements of the wound healing process and are promising wound dressing candidates for future clinical applications.

Electrospun fiber-based strategies for controlling early innate immune cell responses: Towards immunomodulatory mesh designs that facilitate robust tissue repair

Electrospun fibrous meshes are widely used for tissue repair due to their ability to guide a host of cell responses including phenotypic differentiation and tissue maturation. A critical factor determining the eventual biological outcomes of mesh-based regeneration strategies is the early innate immune response following implantation. The natural healing process involves a sequence of tightly regulated, temporally varying and delicately balanced pro-/anti-inflammatory events which together promote mesh integration with host tissue. Matrix designs that do not account for the immune milieu can result in dysregulation, chronic inflammation and fibrous capsule formation, thus obliterating potential therapeutic outcomes. In this review, we provide systematic insights into the effects of specific fiber/mesh properties and mechanical stimulation on the responses of early innate immune modulators viz., neutrophils, monocytes and macrophages. We identify matrix characteristics that promote anti-inflammatory immune phenotypes, and we correlate such responses with pro-regenerative in vivo outcomes. We also discuss recent advances in 3D fabrication technologies, bioactive functionalization approaches and biomimetic/bioinspired immunomodulatory mesh design strategies for tissue repair and wound healing. The mechanobiological insights and immunoregulatory strategies discussed herein can help improve the translational outcomes of fiber-based regeneration and may also be leveraged for intervention in degenerative diseases associated with dysfunctional immune responses. STATEMENT OF SIGNIFICANCE: The crucial role played by immune cells in promoting biomaterial-based tissue regeneration is being increasingly recognized. In this review focusing on the interactions of innate immune cells (primarily neutrophils, monocytes and macrophages) with electrospun fibrous meshes, we systematically elucidate the effects of the fiber microenvironment and mechanical stimulation on biological responses, and build upon these insights to inform the rational design of immunomodulatory meshes for effective tissue repair. We discuss state-of-the-art fabrication methods and mechanobiological advances that permit the orchestration of temporally controlled phenotypic switches in immune cells during different phases of healing. The design strategies discussed herein can also be leveraged to target several complex autoimmune and inflammatory diseases.