Effect of surface stiffness in initial adhesion of oral microorganisms under various environmental conditions

Biofilm formation of Streptococcus mutans, Streptococcus sanguinis, Staphylococcus epidermidis, Staphylococcus aureus, Lactobacillus casei, and Candida Albicans on 5 thermoform and 3D printed orthodontic clear aligner and retainer materials at 3 time points: an in vitro study

INTRODUCTION

Orthodontic clear aligners and retainers have numerous advantages that is making them ever increasingly popular. However, they might, similar to any other oral appliance, contribute to biofilm formation and finally dental caries or white spot lesions or gingival inflammations. The literature on biofilm formation on orthodontic clear appliances is very scarce and limited to a few microorganisms and materials. Therefore, this experimental study evaluated the biofilm formation on 5 thermoformed and 3D printed CAD/CAM orthodontic retainers in 3 intervals.

METHODS

In this in vitro study, 345 specimens (270 test discs and 45 negative controls) were created from fabricated retainers. Retainers included a 3D printed CAD/CAM material (Detax) and four thermoformed retainers [Erkodent (polyethylene terephthalate glycol [PETG]); EasyVac (polyethylene); DB (polyester based on terephthalic acid); and Clear Tech]. They were all 1 mm thick, and all completely fabricated, i.e., heated or printed. The discs were placed in 96-well plates. Microorganisms were cultured on 270 discs for 24 h (90 discs), 72 h (90 other discs), and 5 days or 120 h (90 other discs). Biofilm formation of the strains and negative controls was measured using the microtiter plate assay by ELISA reading. The microbes' ability to produce biofilm was categorized based on the comparison of average optical density (OD) of tests versus a cut-off point OD (ODc) calculated as the average of the OD of corresponding negative controls plus 3× its standard deviation: non-biofilm former [OD ≤ ODc], weak biofilm former [ODc < OD ≤ (2 × ODc)], moderate biofilm former [(2 × ODc) < OD ≤ (4 × ODc)], and strong biofilm former [(4 × ODc) < OD]. These were also converted to ranked scores between zero (no biofilm) and 3. The difference between ODs with control ODs were calculated. These were analyzed using 3-way ANOVA, 2-way ANOVA, and Tukey tests (α = 0.05, α = 0.008).

RESULTS

The 3-way ANOVA showed that the overall difference among the ΔODs of 5 retainers (all microorganisms and all intervals combined, n = 270) was not significant (F = 1.860, P = 0.119). Nevertheless, the difference among 3 intervals (F = 31.607, P = 0.0000) and the difference among the 6 microorganisms (F = 24.044, P = 0.0000) were significant. According to the Tukey test, the differences between the 1st interval with either of the other two intervals was significant (both P values = 0.000). There were significant differences between Candida albicans with all other organisms (all 5 P values = 0.0000). All other pairwise comparisons were insignificant (all 10 P values ≥ 0.1). After taking the averages of the 3 intervals, the order of the biofilm generation for different materials were as follows: Detax (average score: 1.56), Easyvac (1.67), Erkodent (1.78), Clear Tech (1.83), BD (2.28).

CONCLUSIONS

As far as these 6 microorganisms are of concern, there might not be a significant overall difference among the clear retainer materials tested in this study. A significant overall increase was observed between the first and third days, which later did not significantly increase more until day 5. The Candida albicans biofilm was more intense than the tested 5 bacteria, which themselves showed rather similar growth patterns to each other.

Impact of multiscale surface topography characteristics on Candida albicans biofilm formation: From cell repellence to fungicidal activity

While there has been significant research conducted on bacterial colonization on implant materials, with a focus on developing surface modifications to prevent the formation of bacterial biofilms, the study of Candida albicans biofilms on implantable materials is still in its infancy, despite its growing relevance in implant-associated infections. C. albicans fungal infections represent a significant clinical concern due to their severity and associated high fatality rate. Pathogenic yeasts account for an increasing proportion of implant-associated infections, since Candida spp. readily form biofilms on medical and dental device surfaces. In addition, these biofilms are highly antifungal-resistant, making it crucial to explore alternative solutions for the prevention of Candida implant-associated infections. One promising approach is to modify the surface properties of the implant, such as the wettability and topography of these substrata, to prevent the initial Candida attachment to the surface. This review summarizes recent research on the effects of surface wettability, roughness, and architecture on Candida spp. attachment to implantable materials. The nanofabrication of material surfaces are highlighted as a potential method for the prevention of Candida spp. attachment and biofilm formation on medical implant materials. Understanding the mechanisms by which Candida spp. attach to surfaces will allow such surfaces to be designed such that the incidence and severity of Candida infections in patients can be significantly reduced. Most importantly, this approach could also substantially reduce the need to use antifungals for the prevention and treatment of these infections, thereby playing a crucial role in minimizing the possibility contributing to instances of antimicrobial resistance. STATEMENT OF SIGNIFICANCE: In this review we provide a systematic analysis of the role that surface characteristics, such as wettability, roughness, topography and architecture, play on the extent of C. albicans cells attachment that will occur on biomaterial surfaces. We show that exploiting bioinspired surfaces could significantly contribute to the prevention of antimicrobial resistance to antifungal and chemical-based preventive measures. By reducing the attachment and growth of C. albicans cells using surface structure approaches, we can decrease the need for antifungals, which are conventionally used to treat such infections.

In-vitro polymicrobial oral biofilm model represents clinical microbial profile and disease progression during implant-related infections

AIM

Clinically relevant in-vitro biofilm models are essential and valuable tools for mechanistically dissecting the etiopathogenesis of infectious diseases and test new antimicrobial therapies. Thus, the aim of this study was to develop and test a clinically relevant in-vitro oral polymicrobial biofilm model that mimics implant-related infections in terms of microbial profile.

METHODS AND RESULTS

For this purpose, 24-well plate system was used to model oral biofilms, using three different microbial inoculums to grow in-vitro biofilms: (1) human saliva from periodontally healthy patients; (2) saliva as in inoculum 1 + Porphyromonas gingivalis strain; and (3) supra and subgingival biofilm collected from peri-implant sites of patients diagnosed with peri-implantitis. Biofilms were grown to represent the dynamic transition from an aerobic to anaerobic community profile. Subsequently, biofilms were collected after each phase and evaluated for microbiological composition, microbial counts, biofilm biomass, structure, and susceptibility to chlorhexidine (CHX). Results showed higher live cell count (P < .05) for biofilms developed from patients' biofilm inoculum, but biomass volume, dry weight, and microbiological composition were similar among groups (P > .05). Interestingly, according to the checkerboard DNA-DNA hybridization results, the biofilm developed from stimulated human saliva exhibited a microbial composition more similar to the clinical subgingival biofilm of patients with peri-implantitis, with proportions of the main pathogens closer to those found in the disease. In addition, biofilm developed using saliva as inoculum was shown to be susceptible to CHX with significant reduction in bacteria compared with biofilms without exposure to CHX (P < .05).

CONCLUSION

The findings suggested that the in-vitro polymicrobial biofilm developed from human saliva as inoculum is a suitable model and clinically relevant tool for mimicking the microbial composition of implant-related infections.

Cell surface hydrophobicity and petroleum hydrocarbon degradation by biofilm-forming marine bacterium Pseudomonas furukawaii PPS-19 under different physicochemical stressors

Biofilm-forming marine bacterium Pseudomonas furukawaii PPS-19 showed strong hydrophobicity under different physicochemical stressors, such as pH and salinity. Strong aggregation of P. furukawaii PPS-19 was observed at hydrophobic interfaces of n-dodecane and crude oil, while uptake of pyrene resulted in blue fluorescence of the bacterium. Changes in biofilm microcolonies were observed under different physicochemical stressors with maximum biofilm thickness of 15.15 µm and 15.77 µm at pH 7% and 1% salinity, respectively. Relative expression analysis of alkB2 gene revealed the maximum expression in n-dodecane (10.5 fold) at pH 7 (1 fold) and 1% salinity (8.3 fold). During the degradation process, a significant drop in surface tension resulted in increased emulsification activity. P. furukawaii PPS-19 showed the respective n-dodecane and pyrene degradation of 94.3% and 81.5% at pH 7% and 94.5% and 83% at 1% salinity. A significant positive correlation was obtained between cell surface hydrophobicity (CSH), biofilm formation, and PHs degradation (P < 0.05) under all the physicochemical stressors, with the highest value at pH 7% and 1% salinity. Analysis of metabolites indicated that mono-terminal oxidation and multiple pathways were followed for n-dodecane and pyrene biodegradation, respectively. Thus, P. furukawaii PPS-19 is an efficient hydrocarbonoclastic bacterium that may be exploited for large-scale oil pollution abatement.

Antibacterial features of material surface: strong enough to serve as antibiotics?

Bacteria are small but need big efforts to control. The use of antibiotics not only produces superbugs that are increasingly difficult to inactivate, but also raises environmental concerns with the growing consumption. It is now believed that the antibacterial task can count on some physiochemical features of material surfaces, which can be anti-adhesive or bactericidal without releasing toxicants. It is necessary to evaluate to what extent can we rely on the surface design since the actual application scenarios will need the antibacterial performance to be sharp, robust, environmentally friendly, and long-lasting. Herein, we review the recent laboratory advances that have been classified based on the specific surface features, including hydrophobicity, charge potential, micromorphology, stiffness and viscosity, and photoactivity, and the antibacterial mechanisms of each feature are included to provide a basic rationale for future design. The significance of anti-biofilms is also introduced, given the big role of biofilms in bacteria-caused damage. A perspective on the potential wide application of antibacterial surface features as a substitute or supplement to antibiotics is then discussed. Surface design is no doubt a solution worthy to explore, and future success will be a result of further progress in multiple directions, including mechanism study and material preparation.