In silico evaluation of lattice designs for additively manufactured total hip implants

Design of the Elastic Modulus of porous lattice structures composed of cells with continuously variable cross section carrying structures

BACKGROUND

Porous bone implants have a wide range of applications for their low elastic modulus and good connectivity. It is necessary to explore an elastic modulus control method that can significantly regulate the elastic modulus under the condition of maintaining a constant porosity.

METHODS

For achieving continuously changing elastic modulus of porous lattice structure, the simple cubic lattice structures were selected as research object, and the distribution of cross-sectional sizes of its carrying structures were set as variable continuous curves. The prediction model for the elastic modulus was established based on the elasticity mechanics and the equal mass assumption. Then, the prediction model is enhanced through compression simulation of the unit cell structure. Finally, the accuracy of prediction model is validated by compression experiments.

FINDINGS

The results indicate that the distribution of cross-sectional size of the carrying structures has a significant impact on the elastic modulus of unit cell structures under the constraint of equal mass. By adjusting the characteristic parameters of distribution curves, the elastic modulus can be changed within a large range.

INTERPRETATION

Variable cross-section can effectively change the elastic modulus of porous structures while ensuring constant porosity. This method has important value in decoupling the influence of geometric parameters on the elastic modulus of porous structures.

Method of computational design for additive manufacturing of hip endoprosthesis based on basic-cell concept

Endoprosthetic hip replacement is the conventional way to treat osteoarthritis or a fracture of a dysfunctional joint. Different manufacturing methods are employed to create reliable patient-specific devices with long-term performance and biocompatibility. Recently, additive manufacturing has become a promising technique for the fabrication of medical devices, because it allows to produce complex samples with various structures of pores. Moreover, the limitations of traditional fabrication methods can be avoided. It is known that a well-designed porous structure provides a better proliferation of cells, leading to improved bone remodeling. Additionally, porosity can be used to adjust the mechanical properties of designed structures. This makes the design and choice of the structure's basic cell a crucial task. This study focuses on a novel computational method, based on the basic-cell concept to design a hip endoprosthesis with an unregularly complex structure. A cube with spheroid pores was utilized as a basic cell, with each cell having its own porosity and mechanical properties. A novelty of the suggested method is in its combination of the topology optimization method and the structural design algorithm. Bending and compression cases were analyzed for a cylinder structure and two hip implants. The ability of basic-cell geometry to influence the structure's stress-strain state was shown. The relative change in the volume of the original structure and the designed cylinder structure was 6.8%. Computational assessments of a stress-strain state using the proposed method and direct modeling were carried out. The volumes of the two types of implants decreased by 9% and 11%, respectively. The maximum von Mises stress was 600 MPa in the initial design. After the algorithm application, it increased to 630 MPa for the first type of implant, while it is not changing in the second type of implant. At the same time, the load-bearing capacity of the hip endoprostheses was retained. The internal structure of the optimized implants was significantly different from the traditional designs, but better structural integrity is likely to be achieved with less material. Additionally, this method leads to time reduction both for the initial design and its variations. Moreover, it enables to produce medical implants with specific functional structures with an additive manufacturing method avoiding the constraints of traditional technologies.

Biomedical Applications of Titanium Alloys: A Comprehensive Review

Titanium alloys have emerged as the most successful metallic material to ever be applied in the field of biomedical engineering. This comprehensive review covers the history of titanium in medicine, the properties of titanium and its alloys, the production technologies used to produce biomedical implants, and the most common uses for titanium and its alloys, ranging from orthopedic implants to dental prosthetics and cardiovascular devices. At the core of this success lies the combination of machinability, mechanical strength, biocompatibility, and corrosion resistance. This unique combination of useful traits has positioned titanium alloys as an indispensable material for biomedical engineering applications, enabling safer, more durable, and more efficient treatments for patients affected by various kinds of pathologies. This review takes an in-depth journey into the inherent properties that define titanium alloys and which of them are advantageous for biomedical use. It explores their production techniques and the fabrication methodologies that are utilized to machine them into their final shape. The biomedical applications of titanium alloys are then categorized and described in detail, focusing on which specific advantages titanium alloys are present when compared to other materials. This review not only captures the current state of the art, but also explores the future possibilities and limitations of titanium alloys applied in the biomedical field.

Selective Laser Melting and Spark Plasma Sintering: A Perspective on Functional Biomaterials

Achieving lightweight, high-strength, and biocompatible composites is a crucial objective in the field of tissue engineering. Intricate porous metallic structures, such as lattices, scaffolds, or triply periodic minimal surfaces (TPMSs), created via the selective laser melting (SLM) technique, are utilized as load-bearing matrices for filled ceramics. The primary metal alloys in this category are titanium-based Ti6Al4V and iron-based 316L, which can have either a uniform cell or a gradient structure. Well-known ceramics used in biomaterial applications include titanium dioxide (TiO2), zirconium dioxide (ZrO2), aluminum oxide (Al2O3), hydroxyapatite (HA), wollastonite (W), and tricalcium phosphate (TCP). To fill the structures fabricated by SLM, an appropriate ceramic is employed through the spark plasma sintering (SPS) method, making them suitable for in vitro or in vivo applications following minor post-processing. The combined SLM-SPS approach offers advantages, such as rapid design and prototyping, as well as assured densification and consolidation, although challenges persist in terms of large-scale structure and molding design. The individual or combined application of SLM and SPS processes can be implemented based on the specific requirements for fabricated sample size, shape complexity, densification, and mass productivity. This flexibility is a notable advantage offered by the combined processes of SLM and SPS. The present article provides an overview of metal-ceramic composites produced through SLM-SPS techniques. Mg-W-HA demonstrates promise for load-bearing biomedical applications, while Cu-TiO2-Ag exhibits potential for virucidal activities. Moreover, a functionally graded lattice (FGL) structure, either in radial or longitudinal directions, offers enhanced advantages by allowing adjustability and control over porosity, roughness, strength, and material proportions within the composite.

Investigation of lattice infill parameters for additively manufactured bone fracture plates to reduce stress shielding

BACKGROUND

Stress shielding is a detrimental phenomenon caused by the stiffness mismatch between metallic bone plates and bone tissue, which can hamper fracture healing. Additively manufactured plates can decrease plate stiffness and alleviate the stress shielding effect.

METHODS

Rectilinear lattice plates with varying cell sizes, wall thicknesses, and orientations are computationally generated. Finite element analysis is used to calculate the four-point bending stiffness and strength of the plates. The mechanical behaviors of three different lattice plates are also simulated under a simple diaphyseal fracture fixation scenario.

RESULTS

The study shows that with different combinations of lattice infill parameters, plates with up to 68% decrease in stiffness compared to the 100% infill plate can be created. Moreover, in the fixation simulations, the least stiff lattice plate displays 53% more average stress distribution at the healing callus region compared to the 100% infill plate.

CONCLUSIONS

Using computational techniques, it has been demonstrated that additively manufactured stiffness-reduced bone plates can successfully address stress shielding with the strategic modulation of lattice infill parameters. Lattice plates with design versatility have the potential for use in various fracture fixation scenarios.

Numerical and Experimental Study of a Lattice Structure for Orthopedic Applications

Prosthetic reconstructions provide anatomical reconstruction to replace bones and joints. However, these operations have a high number of short- and long-term complications. One of the main problems in surgery is that the implant remains in the body after the operation. The solution to this problem is to use biomaterial for the implant, but biomaterial does not have the required strength characteristics. The implant must also have a mesh-like structure so that the bone can grow into the implant. The additive manufacturing process is ideal for the production of such a structure. The study deals with the correlation between different prosthetic structures, namely, the relationship between geometry, mechanical properties and biological additivity. The main challenge is to design an endoprosthesis that will mimic the geometric structure of bone and also meet the conditions of strength, hardness and stiffness. In order to match the above factors, it is necessary to develop appropriate algorithms. The main objective of this study is to augment the algorithm to ensure minimum structural weight without changing the strength characteristics of the lattice endoprosthesis of long bones. The iterative augmentation process of the algorithm was implemented by removing low-loaded ribs. A low-loaded rib is a rib with a maximum stress that is less than the threshold stress. Values within the range (10, 13, 15, 16, 17, 18, 19 and 20 MPa) were taken as the threshold stress. The supplement to the algorithm was applied to the initial structure and the designed structure at threshold stresses σ_f = 10, 13, 15, 16, 17, 18, 19 and 20 MPa. A Pareto diagram for maximum stress and the number of ribs is plotted for all cases of the design: original, engineered and lightened structures. The most optimal was the designed "lightweight" structure under the condition σ_f = 17 MPa. The maximum stress was 147.48 MPa, and the number of ribs was 741. Specimens were manufactured using additive manufacturing and then tested for four-point bending.