A parallel unidirectional coupled DEM-PBM model for the efficient simulation of computationally intensive particulate process systems

Understanding of Wetting Mechanism Toward the Sticky Powder and Machine Learning in Predicting Granule Size Distribution Under High Shear Wet Granulation

The granulation of traditional Chinese medicine (TCM) has attracted widespread attention, there is limited research on the high shear wet granulation (HSWG) and wetting mechanisms of sticky TCM powders, which profoundly impact the granule size distribution (GSD). Here we investigate the wetting mechanism of binders and the influence of various parameters on the GSD of HSWG and establish a GSD prediction model. Permeability and contact angle experiments combined with molecular dynamics (MD) simulations were used to explore the wetting mechanism of hydroalcoholic solutions with TCM powder. Machine learning (ML) was employed to build a GSD prediction model, feature importance explained the influence of features on the predictive performance of the model, and correlation analysis was used to assess the influence of various parameters on GSD. The results show that water increases powder viscosity, forming high-viscosity aggregates, while ethanol primarily acted as a wetting agent. The contact angle of water on the powder bed was the largest and decreased with an increase in ethanol concentration. Extreme Gradient Boosting (XGBoost) outperformed other models in overall prediction accuracy in GSD prediction, the binder had the greatest impact on the predictions and GSD, adjusting the amount and concentration of adhesive can control the adhesion and growth of granules while the impeller speed had the least influence on granulation. The study elucidates the wetting mechanism and provides a GSD prediction model, along with the impact of material properties, formulation, and process parameters obtained, aiding the intelligent manufacturing and formulation development of TMC.

Optimization of key energy and performance metrics for drug product manufacturing

During the development of pharmaceutical manufacturing processes, detailed systems-based analysis and optimization are required to control and regulate critical quality attributes within specific ranges, to maintain product performance. As discussions on carbon footprint, sustainability, and energy efficiency are gaining prominence, the development and utilization of these concepts in pharmaceutical manufacturing are seldom reported, which limits the potential of pharmaceutical industry in maximizing key energy and performance metrics. Based on an integrated modeling and techno-economic analysis framework previously developed by the authors (Sampat et al., 2022), this study presents the development of a combined sensitivity analysis and optimization approach to minimize energy consumption while maintaining product quality and meeting operational constraints in a pharmaceutical process. The optimal input process conditions identified were validated against experiments and good agreement resulted between simulated and experimental data. The results also allowed for a comparison of the capital and operational costs for batch and continuous manufacturing schemes under nominal and optimized conditions. Using the nominal batch operations as a basis, the optimized batch operation results in a 71.7% reduction of energy consumption, whereas the optimized continuous case results in an energy saving of 83.3%.

Identification of Granule Growth Regimes in High Shear Wet Granulation Processes Using a Physics-Constrained Neural Network

The digitization of manufacturing processes has led to an increase in the availability of process data, which has enabled the use of data-driven models to predict the outcomes of these manufacturing processes. Data-driven models are instantaneous in simulate and can provide real-time predictions but lack any governing physics within their framework. When process data deviates from original conditions, the predictions from these models may not agree with physical boundaries. In such cases, the use of first-principle-based models to predict process outcomes have proven to be effective but computationally inefficient and cannot be solved in real time. Thus, there remains a need to develop efficient data-driven models with a physical understanding about the process. In this work, we have demonstrate the addition of physics-based boundary conditions constraints to a neural network to improve its predictability for granule density and granule size distribution (GSD) for a high shear granulation process. The physics-constrained neural network (PCNN) was better at predicting granule growth regimes when compared to other neural networks with no physical constraints. When input data that violated physics-based boundaries was provided, the PCNN identified these points more accurately compared to other non-physics constrained neural networks, with an error of <1%. A sensitivity analysis of the PCNN to the input variables was also performed to understand individual effects on the final outputs.

Digital Twins in Pharmaceutical and Biopharmaceutical Manufacturing: A Literature Review

The development and application of emerging technologies of Industry 4.0 enable the realization of digital twins (DT), which facilitates the transformation of the manufacturing sector to a more agile and intelligent one. DTs are virtual constructs of physical systems that mirror the behavior and dynamics of such physical systems. A fully developed DT consists of physical components, virtual components, and information communications between the two. Integrated DTs are being applied in various processes and product industries. Although the pharmaceutical industry has evolved recently to adopt Quality-by-Design (QbD) initiatives and is undergoing a paradigm shift of digitalization to embrace Industry 4.0, there has not been a full DT application in pharmaceutical manufacturing. Therefore, there is a critical need to examine the progress of the pharmaceutical industry towards implementing DT solutions. The aim of this narrative literature review is to give an overview of the current status of DT development and its application in pharmaceutical and biopharmaceutical manufacturing. State-of-the-art Process Analytical Technology (PAT) developments, process modeling approaches, and data integration studies are reviewed. Challenges and opportunities for future research in this field are also discussed.