Graphene induced molecular flattening of meso -5,10,15,20-tetraphenyl porphyrin: DFT calculations and molecular dynamics simulations

Concerted Proton-Coupled Electron Transfer to a Graphite Adsorbed Metalloporphyrin Occurs by Band to Bond Electron Redistribution

Surface immobilized catalysts are highly promising candidates for a range of energy conversion reactions, and atomistic mechanistic understanding is essential for their rational design. Cobalt tetraphenylporphyrin (CoTPP) nonspecifically adsorbed on a graphitic surface has been shown to undergo concerted proton-coupled electron transfer (PCET) in aqueous solution. Herein, density functional theory calculations on both cluster and periodic models representing π-stacked interactions or axial ligation to a surface oxygenate are performed. As the electrode surface is charged due to applied potential, the adsorbed molecule experiences the electrical polarization of the interface and nearly the same electrostatic potential as the electrode, regardless of the adsorption mode. PCET occurs by electron abstraction from the surface to the CoTPP concerted with protonation to form a cobalt hydride, thereby circumventing Co(II/I) redox. Specifically, the Co(II) d-state localized orbital interacts with a proton from solution and an electron from the delocalized graphitic band states to produce a Co(III)-H bonding orbital below the Fermi level, corresponding to redistribution of electrons from the band states to the bonding states. These insights have broad implications for electrocatalysis by chemically modified electrodes and surface immobilized catalysts.

Extraordinary Acceleration of an Electrophilic Reaction Driven by the Polar Surface of 2D Aluminosilicate Nanosheets

To increase chemical reaction rates, general solutions include increasing the concentration/temperature and introducing catalysts. In this study, the rate constant of an electrophilic metal coordination reaction is accelerated 23-fold on the surface of layered aluminosilicate (LAS), where the reaction substrate (ligand molecule) induces dielectric polarization owing to the polar and anionic surface. According to the Arrhenius plot, the frequency factor (A) is increased by almost three orders of magnitude on the surface. This leads to the conclusion that the collision efficiency between the ligands and metal ions is enhanced on the surface due to the dielectric polarization. This is surprising because one side of the ligand is obscured by the surface, so the collision efficiency is expected to be decreased. This unique method to accelerate the chemical reaction is expected to expand the range of utilization of LASs, which are chemically inert, abundant, and environmentally friendly. The concept is also applicable to other metal oxides which have polar surfaces, which will be useful for various chemical reactions in the future.

Unraveling Synergistic Redox Interactions in Tetraphenylporphyrin-Polyluminol-Carbon Nanotube Composite for Capacitive Charge Storage

Organic redox-active materials, combined with high-surface-area carbonaceous substrates, form sustainable and low-cost composites with greatly enhanced electrochemical charge storage capacities. The electrochemical capacitive behavior of a composite electrode containing tetraphenylporphyrin sulfonate (TPPS), Chemically polymerized luminol (CpLum), and carbon nanotubes (TPPS-CpLum-CNT) was studied and compared with individual TPPS-CNT and CpLum-CNT composites. The dual-layer TPPS-CpLum had a combined contribution to the electrochemical charge storage, which led to an increased volumetric capacitance over the bare CNT and individual TPPS-CNT and CpLum-CNT composites. The synergistic interactions in the composite enabled faster charge storage kinetics and great stability. Spectroscopic analyses revealed that TPPS and CpLum interact electronically through noncovalent π-π and van der Waals bonds, which facilitates the transfer of electrons during charge and discharge. The synergy in charge storage was confirmed by density functional theory computational analysis, which suggested favorable physisorption and interfacial electronic interactions for TPPS adsorbed to a CpLum-carbon substrate. The combined insights from experimental and computational characterizations show that superimposing redox-active organic layers can be an effective and sustainable approach to design and engineer the surface of carbonaceous materials for capacitive charge storage.

Review of research of nanocomposites based on graphene quantum dots

Graphene quantum dots (GQDs) belong to the vast and versatile family of carbon nanomaterials. Their unique position amongst versatile carbon nanoparticles (NPs) originates from the properties of quantum confinement and edge effects. GQDs are similar to conventional semiconductor QDs due to their tunable band gaps and high photoluminescence activity. However, GQDs have superior characteristics due to their excellent biocompatibility, low toxicity, good water dispersibility, large optical absorptivity, high fluorescence activity and photostability. These properties have generated significant interest in GQDs applications in various fields: nanosensor fabrication, drug delivery, photocatalysis, photovoltaics, and photodynamic therapy. Numerous GQD-based nanocomposites/nanohybrides have been synthesized and/or studied computationally. This review focuses on recent computational studies of various GQD-based nanocomposites/nanohybrides and systems which can be related to them.

Supercapacitance in graphene oxide materials modified with tetrapyrrole dyes: a mechanistic study

The global increase in mobile technology usage has created a need for better energy storage systems. With standard batteries reaching their technological limits, alternate energy storage methods are gaining momentum. In this study, we demonstrate a cheap and efficient way of building from scratch high-performance supercapacitors based on graphene oxide (GO) functionalized with tetrapyrrole derivatives: porphyrins and phthalocyanines. We present supercapacitors with capacitances about 30 times larger than those of the pristine graphene oxide-based counterparts. Experimental characterisation methods including X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), ultraviolet-visible spectroscopy (UV-VIS), electron paramagnetic resonance (EPR), and density functional theory (DFT) calculations revealed correlations between the structural, magnetic, electronic and thermodynamic properties of these materials and their performance as supercapacitors. Electrochemical studies indicate the complex and versatile nature of capacitive effects associated with thin layers of supramolecular composites of graphene oxide. The electrical double layer (EDL) capacitance, cation intercalation and faradaic processes are coupled. Moreover, differences in the electronic interactions between GO and tetrapyrrolic modifiers have a profound effect on the observed capacitance. At the same time, these interactions are sufficiently weak to induce only subtle spectral changes, as well as a small increase of the interlayer distance as determined by XRD measurements. The present work offers a viable strategy for manufacturing high-performance supercapacitive materials that are superior to the state of the art nanocarbon-based supercapacitors using benign electrolytes in terms of capacitance per mass unit and have the potential for application in future green energy storage technologies. Our study provides insight into the multifarious origins of supercapacitance beyond the well-known EDL mechanism.

Lerf-Klinowski-type models of graphene oxide and reduced graphene oxide are robust in analyzing non-covalent functionalization with porphyrins

Graphene-based nanohybrids are good candidates for various applications. However, graphene exhibits some unwanted features such as low solubility in an aqueous solution or tendency to aggregate, limiting its potential applications. On the contrary, its derivatives, such as graphene oxide (GO) and reduced graphene oxide (RGO), have excellent properties and can be easily produced in large quantities. GO/RGO nanohybrids with porphyrins were shown to possess great potential in the field of photocatalytic hydrogen production, pollutant photodegradation, optical sensing, or drug delivery. Despite the rapid progress in experimental research on the porphyrin-graphene hybrids some fundamental questions about the structures and the interaction between components in these systems still remain open. In this work, we combine detailed experimental and theoretical studies to investigate the nature of the interaction between the GO/RGO and two metal-free porphyrins 5,10,15,20-tetrakis(4-aminophenyl) porphyrin (TAPP) and 5,10,15,20-tetrakis(4-hydroxyphenyl) porphyrin (TPPH)]. The two porphyrins form stable nanohybrids with GO/RGO support, although both porphyrins exhibited a slightly higher affinity to RGO. We validated finite, Lerf-Klinowski-type (Lerf et al. in J Phys Chem B 102:4477, 1998) structural models of GO ([Formula: see text]) and RGO ([Formula: see text]) and successfully used them in ab initio absorption spectra simulations to track back the origin of experimentally observed spectral features. We also investigated the nature of low-lying excited states with high-level wavefunction-based methods and shown that states' density becomes denser upon nanohybrid formation. The studied nanohybrids are non-emissive, and our study suggests that this is due to excited states that gain significant charge-transfer character. The presented efficient simulation protocol may ease the properties screening of new GO/RGO-nanohybrids.

Molecular Simulations of Sputtering Preparation and Transformation of Surface Properties of Au/Cu Alloy Coatings Under Different Incident Energies

The surface properties of coatings during deposition are strongly influenced by temperature, particle fluxes, and compositions. In addition, the precursor incident energy also affects the surface properties of coatings during sputtering. The atomistic processes associated with the microstructure of coatings and the surface morphological evolution during sputtering are difficult to observe. Thus, in the present study, molecular dynamics simulation was employed to investigate the surface properties of Au/Cu alloy coatings (Cu substrate sputtering by Au atoms) with different incident energies (0.15 eV, 0.3 eV, 0.6 eV). Subsequently, the sputtering depth of the Au atoms, the particle distribution of the Au/Cu alloy coating system, the radial distribution function of particles in the coatings, the mean square displacement of the Cu atoms in the substrate, and the roughness of the coatings were analyzed. Results showed that the crystal structure and the sputtering depth of Au atoms were hardly influenced by the incident energy, and the incident energy had little impact on the motion of deep-lying atoms in the substrate. However, higher incident energy resulted in higher surface temperature of coatings, and more Au atoms existed in the coherent interface. Moreover, it strengthened the motion of Cu atoms and reduced the surface roughness. Therefore, the crystal structure of coatings and the motions of deep-lying atoms in the substrate are not influenced by the incident energy. However, the increase in incident energy will enhance the combination of coatings and the base while optimizing the surface structure.